Exception message 20 and reorderpoint

After searching for information on why SAP gives message 20 if the net requirement is above the reorderpoint i never to the needed information.
Yes i am able to see that if reorderpoint is 100 and due to a lot size of 50 pc then naturally we will be above our reorderpoint at the arrival of with this PO. In reality what we see it that sap suggest purreq for replenishement considering the reorderpoint and the lotsize . we convert and with the next MRP SAP suggest to cancel the same order which it propose to replenish!. Again yes we are above the reorderpoint due to the lotsize - but why would SAP use the reorderpoint as a max stock level - which it clealy is not.
I need to understand if there somebody has been looking into this issue and how they manage to avoid these message 20 but without exculding them in a spereate group as we do use this message for materials that has other parameters. Are there any oppertunties to customize a limit for when message 20 should appear for a reorderpoint or can it be ticked of as i makes no sense.
Thank you in advance

My Settings are
MRP type VB - manual reorderpoint
reorderpoint 1010
safety stock 135
Lotsize 1000
net requriment stock : 1893
Open PO for 1000 pcs
I made an example where i compaired SAPs calculated reorderpoint V1 with the settings we have to see if the messages disapeared
And my conclusion was
The reason for all of these message 20 is because the safety stock and reorder are inconsistent. As soon as I get SAP to calculate the SS and reorderpoint then message 20 disappear. The GAP between current safety stock 135 and reorder point level 1010 is not equal to the daily requirements *LT + SS it is much higher. SAP sees that the stock /PO comes home before you reach you safety stock level u2013then it considers you to be overstocked ??
With SAP calc: 1586 (net requirement when PO with 1000 pcs) - 438 (SAP SS) = 1148 u2013 1233 (SAP reorderpoint) = 85 units difference (target must be to get a 0 here)
With current manual reorderpoint replenishment : 1893 u2013 135 = 1758 - 1010 =748 units difference u2013 sap considers that overstock?? and therefore a message 20??
I am completely wrong or is this how it works?

Similar Messages

I changed my apple id and everything works fine except message and face time. I cannot reactivate imessage and facetime shows my email to send and receive instead of my mobile number.

I changed my apple id and everything works fine except message and facetime. I cannot reactivate imessage and facetime is using my email instead of my mobile number. How do I reactivated message and use my mobile number on both applications?

I apologize. I misread your statement.
The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages - Support - Apple

MRP exception messages and QI inspection lots

Hi all
Currently my QI inspection lots (that are awaiting a Usage Decision which can take weeks) appear in MD04 with "Cancel process" or "reschedule out" messages.
I don't understand this as the stock is on site so I cannot cancel. How can I stop these messages appearing so my planner only sees Cancel process messages for MRP elements that she can actually cancel like open POs etc?
Thanks.

Hi
The 'Cancel' can be set for all elements, e.g. inspecton lot, purchase order, purchase requisition, production order, process order, if the quantities of them are redundant because the stock and elements before them is enough to meet the requirement.
The exception message is just shown in the case above to suggest the users consider if they are really needed.
If theere were no enough stock and receipts which can meet the requirements before the QM lots the exception would not haapen for them.
Leon Shen.

MRP exception messages and SNP alerts

Hi,
During MRP run in R3 we used to get exception messages like Reschedule in and Reschedule out as per the planning situation.
Now we are using APO SNP heuristic for planning and we are expecting same kind of messages to be given by SNP planning run for same planning situation.
We try to configure some SNP standard alerts but we are unable to find Reschedule in and out kind of alerts in SDP alerts.
Here, we want to know how we can call MRP kind of messages in APO and where these exception messages are stored in APO system.
Whether SNP heuristic is able to throw R3 MRP kind of exception messages for various planning situations?
Please advise.
Regards.
Krish

Hi Krish,
In SDP alert profile this kind of alert is not availabe but it is availabe in PP/DS alerts but that can be called when you are using PPDS planning table.(PPT1 etc)
Please check in alert profile (AMON1 ) in PP/DS tab ->Requirement/Receipt Alerts,Order Alerts - Product-Independent,
http://help.sap.com/saphelp_scm41/helpdata/EN/bb/3c8337fa296e6ce10000009b38f8cf/frameset.htm
Order-related PP/DS alerts
Manish

Process chain - APAP-Program - Raise exception, messages and log

Hello,
I've got a process chain with a "ABAP program" process. How should I deal with an exceptions in the program? In a test, I created an exception. But I could not find it in the log of the process. How can I fill the log?
Thanks for your help!

Hi,
Write a simple information message, this will fill the log with message you are defining.
for example,
IF sy-subrc <> 0.
message i398(00) with 'entries'
                                      'not found'
                                      'in the'
                                      'table'.
ENDIF.
The message will filled in the log if this error condition occurs in the ABAP program.
Thanks.

Regarding Nested exception message

Hi,
In my application, when i run the servlet it gives me following stack trace. I am settign the attribute of exception and passing exception to JSP page where after getting and checking the attribute value . I am setting the new error message.
Issue : My nested excpetion (as per the trace) gives a good explanation of error/exception.
"Nested exception:
Cannot use javahl nor command line svn client"
But when i display the message using e.getMessage or .getLocalizedMessage. I get the message as
org.leafcutter.core.TaskRunnerException: Unable to execute task 'svn'
Is there any way where i can set the nested exception message and send it to JSP page. I dot want the main exception message but nested exception message. Please let me know if it is possible
====================
org.leafcutter.core.TaskRunnerException: Unable to execute task 'svn' at org.leafcutter.core.AntObject.execute(Unknown Source)
at org.leafcutter.core.TaskRunner.run(Unknown Source)
at org.leafcutter.core.TaskRunner.run(Unknown Source)
at DiffServlet.doGet(DiffServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:284)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:204)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:257)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
ContextValve.java:245)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:199)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:184)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:164)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:149)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:156)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:20
6)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:833)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ssConnection(Http11Protocol.java:732)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
:619)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:688)
at java.lang.Thread.run(Thread.java:534)
Nested exception:
Cannot use javahl nor command line svn client
at org.tigris.subversion.svnant.SvnTask.execute(SvnTask.java:269)
at org.leafcutter.core.AntObject.execute(Unknown Source)
at org.leafcutter.core.TaskRunner.run(Unknown Source)
at org.leafcutter.core.TaskRunner.run(Unknown Source)
at DiffServlet.doGet(DiffServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:284)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:204)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:257)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
ContextValve.java:245)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:199)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:184)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:164)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:149)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:156)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:20
6)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:833)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ssConnection(Http11Protocol.java:732)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
:619)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:688)
at java.lang.Thread.run(Thread.java:534)
==============================

let me rephrase the question.
I am using 3rd party API leafcutter, due to some reason it is throwing one exception (nested one). In the main flow this exception is coming along with main exception
I want the message of nested exception.
If it can be implemented with getCause. Please let me know how to set that.
or is there any other way to implement this

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

Transaction code to display exception messages by material and plant

Hi,
Is there a transaction code or standard report in SAP to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
Thanks.

Visu,
I have never seen such a report.
MD06 does support fine tuning the output display, once the list has been generated. If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted. If you are addressing the messages interactively, you can select the review (glasses) screens, and scroll through just the ones which contain your selected exception message(s).
To try this, execute MD06. Select the groups as necessary. Execute. Wait for the list. Now, immediately, select 'search' (binoculars). Experiment with the output.
As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
Rgds,
DB49

Exception message for PrdOrd and Planned order

Hi Gurus,
It possible based on prdord and planned ord we need to get the Exception message information. It's there any standard transaction code or any sqvi report?
Note:
Exception Message:
10 - Reschedule in
20 - cancel
05 - Opening date in the past
26 - Excess in individual segment
Please find this information in MD04 (single order). i am looking for same time multple orders with exception message report.
Thanks and regards,
Deethya.B

Hi
You can use MD06 with refrence to you plant and MRP Controllers. Also you can define your own traffic lights so that based on these you get your exception messages.
Hope this helps,
Regards,
Ravi

Dates and Exception message in MD04

Hi all ,
              When i view in MD04 t-code for one purchase order the system shown the below exception message
Exception 30 = Plan process according to schedule (08/01/10/07/25/10)
           06 = Start date in the past
I cant understand the dates inside the braket . We are following the factory calender all days working days (No holidays)
When i calculate the no of days between 07/12/2010 and 08/11/2010 it is more than 28 days (the date format is ( MMDDYYYY)
Can anybody explains why it is happened?
Delivery date   D 08/11/2010
Req. date       07/12/2010
Release date    07/12/2010
Plnd dely time 28
GR proc. time   7

Hi,
Refer to Mr. Rajesha's reply in the below thread, it should clarify your doubt, else revert
exception Message 30 "Plan process according to schedule"
Regards,
Vivek

MRP exception message 64 and planning strategy group 52

Hi Gurus,
I have done extensive search online in the forum to find the route cause why we are getting MRP exception message 64 for a specific material in one of our plants. This exception message does not occur for the same materials which is also produced in another plant.
I was just wondering whether the planning strategy group of 52 in MRP 3 view would have any effect on the frequent occurrence of exception message 64. I know that the 64 message occurs when the routing time is higher than the in house production time. If that's the case where to look for in routing to correct this, apart from this do we need to look at work centers and other details. I'm not a PP person but still was curious to know see if i could take a shot at it.
Also the MRP settings that we follow in the plant where this problem does not occur is NETCH, Create PR - 2, Schedule lines - 3, create MRP list - 1, Planning mode - 3, scheduling -2
in the plant where the 64 message occurs quite often is Netch, Create PR -2, Schedule lines - 3, create MRP list - 1, planning mode - 1, Schdeduliing - 1
I was thinking do MRP settings and planning strategy group would have any impact on why we are getting the 64 wexception message
Because of this 63 exception message, the downstream components are getting wrong signals.
Thanks
Ravi

Hello Ravi
Generallt, exception message "64 - Production finish after order finish" is triggered when the order start date is in the past and system automatically changes to forward scheduling to calculate the finish date.
Note 1913017 explains how the order basic date is calculated and adjusted in case of forward scheduling, however, you are using strategy 52 and this is a very special scenario, whever VP planned orders are generated.
The VP planned orders will always be adjusted to the requirements date even if the requirements date is in the past. This is a special feature in the planning segment, since these orders are only kind of 'virtual' planned orders. These orders only have to provide the demand requirements for the components in time.
Therefore, there is a relationship between strategy 52 (VP planned order) and the exception message observed.
BR
Caetano

Exception message 10 and safety stock

Hello
When I have a ressource in the past (we have this case), and if the safety stock is not complet, the exception message is "10" (reschedulling in) without date.
Normaly the result should be exception message "15" (rescheduling out) with a date.
Why have I an exception message "10" without date ?
Is it the custo, but I found nothing ?

Hi Christian,
I've seen this myself, and believe that it happens only if you allow start in the past and have got insufficient coverage for safety stock.
I guess it doesn't have a date because of the start in the past, which will set availability date even today. Try to change the "start in the past" indicator, and see what happens.
Regards,
Mario

Exception Message number 30 and rescheduling date

Hi everybody,
This is about the exception message 30 which is displayed in MD04 and the rescheduling date.How is this date determined and what does the exception message signify. Further, it would be great if i can get any link on forward/backward scheduling and how the system determines the dates?Also, what is the criteria for this rescheduling date to be displayed in MD04?
Thanks and regards,
Deepthi.

Hi,
Exception Message 30 - Plan process according to schedule
say , if there is a PIR on 02.7.08 and a planned order to cover this reqmt is generated with Ord finish date as 05.7.08 , system will now throw an Exception Message - 30 with the rescheduling date as 02.07.08 to complete the order on the same day as that of the requirement say 02.07.08.
also , pls go thru the foll links
http://help.sap.com/saphelp_470/helpdata/en/55/6704a195d711d3b6fb0000e8359890/content.htm
http://help.sap.com/saphelp_470/helpdata/en/f4/7d294a44af11d182b40000e829fbfe/content.htm

MD07 and new exception messages

Hello,
Is it possible to add the new exception messages in MD07 transaction (e.g. ND type materials).
Idea is to sort the materials with new sales order created. As of now I can sort materials below the safty stock and few others.
I have found FM
MD_STOCK_REQUIREMENTS_LIST_API and
Program: RMMD07EX and RMMD07DB
But still have to explore.
Please suggest !
regards,
JPS

Hi,
1. I dont think that you will be able to add any new exception messages.
2. Reg the Function MOdule
This will help you to fetch the details of the MD04 stock reqruiement list
3. Both the belwo program helps you to have different selection screen parameters than what we have in the standard MD05 / MD05 SCREENS.
RMMD07EX and RMMD07DB
Reg
Satheesh

MD04 and PO return delivery quantity with exception message 15

Hi, Please suggest me how to get rid of PO return delivery quantity from MD04 where it is showing as POitem with receipt quantity and exception message 15 - reschedule out and reschedule date is showing current date.
Here we have received x qty from vendor and then moved y qty to blocked stock and then did return delivery (here return delivery did without any reference), we will not receive y qty anymore in future, how to get rid of this qty from MD04.

Hello
Please refer to the following note for more details about this scenario:
634038 - MRP: Returns order and delivery
This note explains in detail the customizing settings that you might use to turn a return delivery not relevant to MRP.
Best Regards
Caetano Almeida

Exception message 20 and reorderpoint

Similar Messages

Maybe you are looking for