Exception when executing a report: Field I_REPORT_ID not a member of INPUT
Hello,
I created a simple Report with the Report Designer. When I try to execute it in the portal hitting the "Execute"-button i get the following BI Runtime Exception:
Exception in BI runtime
[code]Initial cause
Message:
Field I_REPORT_ID not a member of INPUT
Stack trace:
com.sap.mw.jco.JCO$Exception: (127) JCO_ERROR_FIELD_NOT_FOUND: Field I_REPORT_ID not a member of INPUT[/code]
I omitted the rest of the stack trace. It was too long to fit into this post (probably there is a restriction on the maximum number of characters in a forum post )
We are on SP 08 at the backend BI-System and the front-end tools are on patch level 8, hotfix 2.
Any ideas what's the reason behind that error?
Thanks to any answers in advance and best regards,
Philipp
Hi Karol,
thanks for your answer.
I also had this SP synchronization issue regarding other problems with the execution of web templates. See my post <a href="https://forums.sdn.sap.com/thread.jspa?threadID=209587">https://forums.sdn.sap.com/thread.jspa?threadID=209587</a>.
I will once again ask the basis team, if the two SP-levels are identical.
Regards,
Philipp
Similar Messages
-
when trying to add User to Group using BAPI_USER_CHANGE in the Import Parameters GROUPSX = X
I'm getting following error :
com.sap.conn.jco.JCoRuntimeException: (127) JCO_ERROR_FIELD_NOT_FOUND : Field GROUPS not a member of INPUT
BAPI_USER_CHANGE function work correctly for other parameters such as ADDRESSX, DEFAULTSX, PASSWORDX, LOGONDATAX, ALIASX
But in case GROUPSX I am getting above error.
Also I could able to add all above attributes including GROUPSX to user using sap logon. so it should be possible from BAPI as well.
Any input will be appreciated.My bad,
I meant GROUPS is not an input parameter but a table parameter.
This is the ABAP definition of the BAPI:
function bapi_user_change.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(USERNAME) LIKE BAPIBNAME-BAPIBNAME
*" VALUE(LOGONDATA) LIKE BAPILOGOND STRUCTURE BAPILOGOND OPTIONAL
*" VALUE(LOGONDATAX) LIKE BAPILOGONX STRUCTURE BAPILOGONX
*" OPTIONAL
*" VALUE(DEFAULTS) LIKE BAPIDEFAUL STRUCTURE BAPIDEFAUL OPTIONAL
*" VALUE(DEFAULTSX) LIKE BAPIDEFAX STRUCTURE BAPIDEFAX OPTIONAL
*" VALUE(ADDRESS) LIKE BAPIADDR3 STRUCTURE BAPIADDR3 OPTIONAL
*" VALUE(ADDRESSX) LIKE BAPIADDR3X STRUCTURE BAPIADDR3X OPTIONAL
*" VALUE(PARAMETERX) LIKE BAPIPARAMX STRUCTURE BAPIPARAMX
*" OPTIONAL
*" VALUE(COMPANY) LIKE BAPIUSCOMP STRUCTURE BAPIUSCOMP OPTIONAL
*" VALUE(COMPANYX) LIKE BAPIUSCOMX STRUCTURE BAPIUSCOMX OPTIONAL
*" VALUE(SNC) LIKE BAPISNCU STRUCTURE BAPISNCU OPTIONAL
*" VALUE(SNCX) LIKE BAPISNCUX STRUCTURE BAPISNCUX OPTIONAL
*" VALUE(BACK_DISTRIBUTION) LIKE BAPIFLAG STRUCTURE BAPIFLAG
*" DEFAULT SPACE
*" VALUE(PASSWORD) LIKE BAPIPWD STRUCTURE BAPIPWD OPTIONAL
*" VALUE(PASSWORDX) LIKE BAPIPWDX STRUCTURE BAPIPWDX OPTIONAL
*" VALUE(ADDCOMX) LIKE BAPIADCOMX STRUCTURE BAPIADCOMX OPTIONAL
*" VALUE(REF_USER) LIKE BAPIREFUS STRUCTURE BAPIREFUS OPTIONAL
*" VALUE(REF_USERX) LIKE BAPIREFUSX STRUCTURE BAPIREFUSX OPTIONAL
*" VALUE(ALIAS) TYPE BAPIALIAS OPTIONAL
*" VALUE(ALIASX) LIKE BAPIALIASX STRUCTURE BAPIALIASX OPTIONAL
*" VALUE(GROUPSX) LIKE BAPIGROUPX STRUCTURE BAPIGROUPX OPTIONAL
*" VALUE(UCLASS) TYPE BAPIUCLASS OPTIONAL
*" VALUE(UCLASSX) TYPE BAPIUCLASSX OPTIONAL
*" VALUE(EXTIDSX) TYPE BAPIUSEXTIDX OPTIONAL
*" VALUE(PRODUCTIVE_PWD) TYPE BAPIFLAG-BAPIFLAG DEFAULT SPACE
*" TABLES
*" PARAMETER STRUCTURE BAPIPARAM OPTIONAL
*" RETURN STRUCTURE BAPIRET2
*" ADDTEL STRUCTURE BAPIADTEL OPTIONAL
*" ADDFAX STRUCTURE BAPIADFAX OPTIONAL
*" ADDTTX STRUCTURE BAPIADTTX OPTIONAL
*" ADDTLX STRUCTURE BAPIADTLX OPTIONAL
*" ADDSMTP STRUCTURE BAPIADSMTP OPTIONAL
*" ADDRML STRUCTURE BAPIADRML OPTIONAL
*" ADDX400 STRUCTURE BAPIADX400 OPTIONAL
*" ADDRFC STRUCTURE BAPIADRFC OPTIONAL
*" ADDPRT STRUCTURE BAPIADPRT OPTIONAL
*" ADDSSF STRUCTURE BAPIADSSF OPTIONAL
*" ADDURI STRUCTURE BAPIADURI OPTIONAL
*" ADDPAG STRUCTURE BAPIADPAG OPTIONAL
*" ADDCOMREM STRUCTURE BAPICOMREM OPTIONAL
*" GROUPS STRUCTURE BAPIGROUPS OPTIONAL
*" PARAMETER1 STRUCTURE BAPIPARAM1 OPTIONAL
*" UCLASSSYS STRUCTURE BAPIUCLASSSYS OPTIONAL
*" EXTIDHEAD STRUCTURE BAPIUSEXTIDHEAD OPTIONAL
*" EXTIDPART STRUCTURE BAPIUSEXTIDPART OPTIONAL
So the error message is correct, GROUPS is not an INPUT parameter. -
ERM error: Field ROLE not a member of INPUT
Hi Experts,
After upgrade to 11.2 I'm having this error.
It appears at the Define Authorization stage after I chose transactions and clicking continue.
The connectors and JCos are working.
Please assist.
Thx,
Vit V
edit: All XMLs reloaded and system restarted.
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Current Module: |RE| Conversation: |cnvRole| Screen: |scrSearchTransaction|
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Module#RE#Conversation#cnvRole#Screen#scrManageAuthorization#Action#continueTCodeSearch#
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Changing Screen: FROM: scrSearchTransaction TO scrManageAuthorization
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG com.virsa.framework.Context : clearScreenRep : : 6 entries cleared from screen repositiory
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Handler found:class com.virsa.re.role.actions.AuthAuthorizationDataAction
2010-04-20 11:59:05,575 [SAPEngine_Application_Thread[impl:3]_39] DEBUG SAPConnectorDAO.java@365:com.virsa.comp.connectors.dao.jdbc.SAPConnectorDAO.findByConnectorName()connectorId: 5; lngId: 1
2010-04-20 11:59:05,590 [SAPEngine_Application_Thread[impl:3]_39] DEBUG SAPConnectorDAO.java@365:com.virsa.comp.connectors.dao.jdbc.SAPConnectorDAO.findByConnectorName()connectorId: 5; lngId: 1
2010-04-20 11:59:05,590 [SAPEngine_Application_Thread[impl:3]_39] DEBUG com.virsa.service.sap.SAPConnectorHelper : getClientFromSLD : : INTO the method SapConnectorDTO :com.virsa.service.sap.dto.SapConnectorDTO@3e0a2020[conClass=,system=COD200,appId=COD200,host=consit-sap,systemNo=00,client=200,userId=codcom,SystemLang=EN,sysId=cod,messageServerGrp=default,messageServerHost=consit-sap,password=xxxxx,type=ECC600,userName=,description=COD200,isSLD=true,isActive=true,isHRSystem=false]
2010-04-20 11:59:05,590 [SAPEngine_Application_Thread[impl:3]_39] ERROR Field ROLE not a member of INPUT
java.lang.Throwable: Field ROLE not a member of INPUT
at com.sap.mw.jco.JCO$MetaData.indexOf(JCO.java:9534)
at com.sap.mw.jco.JCO$Record.setValue(JCO.java:14923)
Edited by: Vit Vesely on Apr 20, 2010 12:10 PMHi guys,
The problem is finally resolved.
1. Implement SNOTE 1441463
2. Implement SNOTE 1443612
3. Register key for object /VIRSA/RE_OBJ_INFO
4. In SE03 >> Administration >> Set System Change Option. Change /VIRSA/ to modifiable
5. In Se11 open data type /VIRSA/RE_OBJ_INFO in change mode with the key from p. 3
6. Edit structure according to Note 1452772. Save and activate.
7. Implement SNOTE 1452772
8. Restart grc~reear (or the server)
...or wait for VIRSANH patch 12
Hopefully it will work for you aswell.
Kind Regards,
Vit -
Error: Field I_FONT_PATH not a member of INPUT
Hi,
I try display report from BW on Portal.
I use Template Installer - Note 923359 - Collective Note: Configuration Wizard - Template Installer.
When I click Next - I see [error|http://c.wrzuta.pl/wi15549/14ea657400230cc84874c1f3/err?type=i&key=64URjMq6ql&ft=f]:
This look like my [table|http://c.wrzuta.pl/wi9025/d8e6222d000a85044874c1ae/sm30?type=i&key=drzqCqTbe9&ft=f].
Best regards,
BogdanHi,
I am also facing this problem, did you find the solution for this?
thanks
Karthik -
BAdI: Field LIFNR not ready to accept input (Change will not be adopted)
Dear Guruz...\
given below is the warning with message number
BAdI: Field LIFNR not ready to accept input (Change will not be adopted)
Message no. MIGO050
while i am trying to enter the batch name for removal for scrapping and clicking check this warning is being displayed.
KIndly if you are having any other solutions in customizing other than using BADI... pl discuss..Hi,
You must have some kind of BAdI (probably MB_MIGO_ITEM_BADI och MB_MIGO_BADI) that places a value in the field LIFNR (vendor). However, this field is not open for entry and hence SAP ignores the value provided by the BAdI.
Either correct your BAdI so it doesn't populate the field when the latter is not available (e.g. based on the mvt /special stock ind.) or live with this warning message - it is harmless.
BR
Raf -
Field LTRFLDDIS not a member of DFIES - Import RFC in IR
Hello People,
When I try to import one RFC in IR from a SAP ECC System appears the follow error message: "Field LTRFLDDIS not a member of DFIES".
Could anyone help me about this problem ?
Thanks in advance.
Regis FerratoHi,
did you found a solution for your problem? I'm facing the same one.
Thanks in advance.
Regards
Reza -
Field LTRFLDDIS not a member of DFIES
Hi,
I'm trying to get the 'WD accessing ABAP function' tutorial to run which uses bapi_flight_getlist.
During runtime I get the following java exception:
com.sap.mw.jco.JCO$Exception: (127) JCO_ERROR_FIELD_NOT_FOUND: Field LTRFLDDIS not a member of DFIES
However, checking the SAP backend field LTRFLDDIS is included in structure DFIES.
Any idea what's going wrong here?
Tx and regards,
UlliCSS note 802727
how to see the solution
please provide solution for this
i am strucked up with this problem -
Field E_TSX_SELECTION_SPACE_0 not a member of OUTPUT
Hi, gurus,
I'm trying to run a query in a web portal. In Analyzer all works correctly. In the rsrt transaction all also works without errors.
But in the portal instead of running query i receive this error message:
Field E_TSX_SELECTION_SPACE_0 not a member of OUTPUT
com.sap.mw.jco.JCO$Exception: (127) JCO_ERROR_FIELD_NOT_FOUND: Field E_TSX_SELECTION_SPACE_0 not a member of OUTPUT
at com.sap.mw.jco.JCO$MetaData.indexOf(JCO.java:9566)
at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Structure.getTable(Jco640Structure.java:449)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderComponentList.setup(ProviderComponentList.java:132)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderComponentList.getComponents(ProviderComponentList.java:172)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.ComponentList.setup(ComponentList.java:119)
Did anyone faced with that? I tried to find related notes, but failed with that(
Are there any solvings for this problem?
Thank you.Hi,
Please check SAP OSS Note : 1444180 - Error : Field E_TSX_SELECTION_SPACE_0 not a member of OUTPUT (https://service.sap.com/sap/support/notes/1444180) If your BI Java component is NW 701 SP05 or SP06 Please apply the SP07 Patches for BI Java components BI BASE SERVICES and BI WEBAPPLICATIONS this should solve your issue.
Regards,
Ratish P. -
'Query has not yet calculated' When executing BW report in Bex
Hi, all
There is message 'Query has not yet calculated' when execucting BW report in BEx.
what's the reason? How to solve this issue?
however, when I change the filter to one or several employee number such as employee information report, there will be one or several records in the report.
Anyone can help me?Thanks very mcuh.
Carinaok.
While using exception aggregation, you need to give a reference characteristics. You might have given 0calday for the same for 0ANSALARY ( SUM LAS ) and your infoprovider does not have 0calday and the report is unable to calculate the result based on 0calday.
This will obviously throw and error but you will be able to see the result. But the result will not calculate last sum for 0ansalary correctly.
For this, please check the infoprovider design. You can use reference character other than 0calday and make sure that, the reference time characteristics is present in your infoprovider.
Cheers
Chanda -
SSRS Integrated mode failes (timeout) when executing lengthy reports.
Hi All,
I have SSRS 2008 R2 running in integrated mode with SharePoint 2010 foundation. The SharePoint farm and SSRS are both configured for Kerberos authentication. Both SSRS and SharePoint are working well. The vast majority of reports
compile in less than 30 seconds, users are generally happy.
Except, I have a couple of reports which take a long time to execute on the SQL side, I cant change this, that's just how it has to be. The simplest of the reports to explain is a report, with 1 parameter with four values, which performs
up to four actions on the SQL Server and then returns around two dozen rows of the result, typically the entire process completes in around 10 minutes. If I run this report via the ssrs /reportserver WFE the report always completes, results are presented
on screen, no issues whatsoever. When I run the same report from within SharePoint, its a different story, the report will complete only if I select just one of the four parameter actions, resulting in the total report execution time of
around 4 minutes, However when running the report with all four parameters selected, the loading spinner appears, then after 6 minutes, disappears entirely. The page returns to the parameter selection, no results are presented.
Having checked all the SSRS log files and ExecutionLogStorage table, they suggest that the report carries on building in the background, and then completed roughly 10 minutes after starting.
So my conclusion is that something in SharePoint does not like the extended duration of the report execution. But what is it, What triggers the 6 minute timeout?
Any help much appreciated.
Regards
DanHi danbridgland,
According to your description, there are a couple of reports in SSRS Sharepoint integrated mode. The query takes a long time to execute in SQL Server. When you run the report via Sharepoint WFE, the report works fine. When you run the report in Sharepoint
Application, the report will be displayed if you select one parameter value, if four values of the parameters are selected, the report disappears after 6 minutes’ loading.
In Native mode, SSRS uses a default timeout of 9000 seconds. In SharePoint integrated mode the timeout is reduced to 120 seconds. The timeout in SharePoint is actually related to the fact that reports are rendered using the http runtime. Any operation that
is launched from within SharePoint using the httpRuntime object has to complete within the timeout parameters. In this case, we can directly editing timeout in web.config by following steps:
Locate web.config for the SharePoint site you have configured for SSRS integration (default location: C:\inetpub\wwwroot\wss\VirtualDirectories\80).
Open the file in an XML or text editor.
Navigate to httpRuntime element, inside the tag, add executionTimeout="9000".
In addition, in SharePoint integrated mode, reports typically run slower than when the same reports run in native mode. One main cause of this latency can be attributed to SharePoint object model calls that are made. For detail information, please refer
to the following document:
http://support.microsoft.com/kb/2216504
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu -
Performance Problem when executing the report for the first time.
Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran. -
ALV report - fields do not print on same line
I am working on an ALV report now. And I was trying to download the report using the buttons.
When I download the file (Local File Button) and then try to view it, all the fields are not on the same line.
Say for example, if i have 75 fields, half appear on the first line and the other half appear on the second line.
But when I try to view the file in excel format using ctrlshiftF7, it looks perfectly fine (All the 75 fields lie on the same line).
And also when I right click on the report and save as .mhtml, it looks good (All the 75 fields lie on the same line).
How can this issue be fixed? Is it something to do with the code?
Please let me know, if anybody else had a similar issue and as to how it was resolved.
I would greatly appreciate your help. Thank You.I am not very clear about your problem.
What i understood is that you are downloading the file (I beleive as unconverted) and than opening it in NOTEPAD and you are getting one record in 2 lines. If yes than try to uncheck the Format-> word wrap in the menu in Notepad. -
Error when executing a report in Bex analyzer"
Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
RaoHi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet -
Crystal Reports Field Explorer not showing
Hi,
I am using Visual Studio 2003 with the bundled version of Crystal Reports. It has always worked fine until recently the Field Explorer tool bar does not show up anymore when I open a Crystal Report for development. I have uninstalled the entire Visual Studio and reinstalled the Visual Studio but it still will not show the Crystal Reports Field Explorer. However, if I install the Visual Studio on a completely different computer it works fine. Anyone have any idea what could be causing this problem on my main computer? Could it be a setting somewhere in the Visual Studio? I cannot find any information on this problem.
Thanks,
RazzleOk, I figured out what the problem was. It was something wrong in my Windows profile. So I deleted my Windows profile and created a new one and it is working now.
Razzle -
Invalid Object Name When Executing from Report Manager
I ran some code to create a modified view of ExecutionLog3 on a SQL Server 2012 instance. The ReportServer and ReportServerTempDB were transferred from a 2005 instance and are still on that compatibility level. After creating the new view, I
created a report in SSDT and it runs fine. I deployed the dataset followed by the report. I went to Report Manager to test it and the report fails with the following:
An error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set
'ExecutionLog'. (rsDataSetExecutionError)
Query execution failed for dataset ''. (rsErrorExecutingCommand)
Invalid object name 'ExecutionLog3_Modified'.
The code for the view is below and it came from MSSQLTips. Why does the report run fine from SSDT and fail in Report Manager?
USE [ReportServer]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[ExecutionLog3_Modified]
AS
SELECT
EL.InstanceName,
COALESCE(C.Path, 'Unknown') AS ItemPath,
EL.UserName,
EL.ExecutionId,
CASE(EL.RequestType)
WHEN 0 THEN 'Interactive'
WHEN 1 THEN 'Subscription'
WHEN 2 THEN 'Refresh Cache'
ELSE 'Unknown'
END AS RequestType,
-- SubscriptionId,
EL.Format,
Parameters,
CASE(EL.ReportAction)
WHEN 1 THEN 'Render'
WHEN 2 THEN 'BookmarkNavigation'
WHEN 3 THEN 'DocumentMapNavigation'
WHEN 4 THEN 'DrillThrough'
WHEN 5 THEN 'FindString'
WHEN 6 THEN 'GetDocumentMap'
WHEN 7 THEN 'Toggle'
WHEN 8 THEN 'Sort'
WHEN 9 THEN 'Execute'
ELSE 'Unknown'
END AS ItemAction,
EL.TimeStart,
YEAR(EL.TimeStart) AS Start_Year,
MONTH(EL.TimeStart) AS Start_Month,
DATENAME(MONTH,EL.TimeStart) AS Start_Month_Name,
DATENAME(DW,EL.TimeStart) AS Start_Day_Of_Week,
DATEPART(WEEKDAY,EL.TimeStart) AS Start_Day_Number_of_Week,
EL.TimeEnd,
EL.TimeDataRetrieval,
EL.TimeProcessing,
EL.TimeRendering,
CASE(EL.Source)
WHEN 1 THEN 'Live'
WHEN 2 THEN 'Cache'
WHEN 3 THEN 'Snapshot'
WHEN 4 THEN 'History'
WHEN 5 THEN 'AdHoc'
WHEN 6 THEN 'Session'
WHEN 7 THEN 'Rdce'
ELSE 'Unknown'
END AS Source,
EL.Status,
EL.ByteCount,
EL.[RowCount],
EL.AdditionalInfo,
C.Name,
C.CreatedByID,
C.ModifiedByID,
C.Description,
C.CreationDate,
C.ModifiedDate,
CASE
WHEN C.TYPE=1 THEN 'Folder'
WHEN C.TYPE=2 THEN 'Report'
WHEN C.TYPE=3 THEN 'XML'
WHEN C.TYPE=4 THEN 'Linked Report'
WHEN C.TYPE=5 THEN 'Data Source'
WHEN C.TYPE=6 THEN 'Model'
WHEN C.TYPE=8 THEN 'Shared Dataset'
WHEN C.TYPE=9 THEN 'Report Part'
END AS Type_Description
FROM
ExecutionLogStorage AS EL
LEFT OUTER JOIN Catalog AS C ON (EL.ReportID = C.ItemID)
GO
Lee MarkumHi Lee,
According to your description, you can't process the dataset when viewing the report on report server. Right?
In this scenario, as you can see the dataset name in error message is empty, and it says "Invalid Object Name". Because you have already created a view in your database. When you run this report again, this query be executed again so that you can
not create another view with same name. So you just need to query the view directly when creating dataset.
Select * from ExecutionLog3_Modify
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
Maybe you are looking for
-
How to fade a symbol instance out and in on the Timeline
I am using Flash Professional CC 2014 on a Mac running Yosemite. I am a Flash novice. I want to fade out the oval and photo, then fade it back in. Any help would be greatly appreciated.... thanks in advance! - Gordie
-
Hello, Am logic 7.1- PM g5 user. Earlier I got some good advice from Rohan (on this group) and have narrowed my choice of an audio interface down to RME fireface or Metro Halo. He also ofilled in another I had about recording from them. So, now just
-
Many forms issues in one spool
Hello, Can we have many forms issues(smartforms) in one spool? I need to send one print stream / PCL format not multiple spools. Best Regards,
-
HT4009 There's an unauthorized charge in my credit card from iTunes of $20.0
There's an unauthorized charge on my credit card bill 4/30/13 - $2.99 and $20.00 from Itunes.. Please credit back $22.99 on my credit card
-
Suggestions for iPad lap desk?
It is obvious I am going to need some kind of lap desk for my iPad. I use it a lot for writing, and a lap desk is essential. There are hundreds of them on the market. Does anyone have one they can recommend?