Exceptions for repeating Events aren't handled correctly on iPod!?

I have a few repeating all day events set up in my calendar in iCal. If I sync them to my iPod they are transfered correctly.
However, if I move one of them in iCal from say wednesday to tuesday as an exception for this event (for just one week), the event isn't moved on the ipod as well. Instead, after syncing, it shows up on tuesday *as well as* wednesday. In iCal everything is displayed correctly...but on the ipod it is doubled.
Does anyone know how to fix this?
Best regards,
Markus.

Scott,
thanks for your hint. unfortunately this didn't change anything at all.
I still got my repeating events correct on the mac but doubled on the ipod.
Any other ideas?
Best regards,
Markus.

Similar Messages

My calendar on my iPhone 4 erases all data over a month old except for recurring events. How Do I get it to keep the info and not erase calendar events?

My calendar on my iPhone 4 erases all data over a month old except for recurring events. How Do I get it to keep the info and not erase calendar events?

Settings>Mail, Contacts, Calendars>Calendars>Sync>All Events.
Note: If you're using a work Exchange account, the administrator my have restricted your options for this setting.

Handling exceptions for a event handler method.

Hi Mates,
I have two custom container in which i am displaying an alv grid usind objects. when a double click event is performed in one of the alv the other alv should be displayed. I now have to handle exceptions of the class CX_SY_DYN_CALL_ILLEGAL_TYPE. This is raised for an invalid parameter type when calling a method dynamically. I cannot use the keyword "RAISING" in the definition of the event handler method. i checked with the syntax of the method definition in abap dictionary, there were no addition "RAISING" for an event handler method. please provide me with the solution (a sample code would do.)

Hello,
May be you should read about the TRY ... CATCH block which is used for handling exceptions.
Basic construct of your code should look like this:
TRY.
" Your Dynamic Method call
CATCH CX_SY_DYN_CALL_ILLEGAL_TYPE.
ENDTRY.
If you want to get the error message text:
DATA:
lcx_excp TYPE REF TO CX_SY_DYN_CALL_ILLEGAL_TYPE,
v_err_msg TYPE string.
TRY.
" Your Dynamic Method call
CATCH CX_SY_DYN_CALL_ILLEGAL_TYPE INTO lcx_excp.
v_err_msg = lcx_excp->get_text( ).
ENDTRY.

Fix for repeating events broken by OCS/Palm?

When I sync my Treo using Oracle Calendar Sync (to my Mac), repeating events are broken into individual items
... and then the events on the Palm are broken into individual events, too!
Has anyone found a workaround for this problem?
Does the same thing occur when syncing on a Windows machine? How about when using Mobile Sync?
Is there any way to sync one-way, so at least the repeating events on my Treo are not screwed up?
Thanks!

You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html

ICal and Calendar sync one week apart for Repeating events

Hi,
First Post here. Look forward to sticking around. I have been reading the forum avidly since I received my iphone 3g on July 11th.
So here is the issue: It is in regards to events that I created on my iphone that are scheduled to repeat each week, but then end on a certain day. This works perfectly fine in the iphone so far, but when it syncs with iCal it always ends one week earlier than on the iphone. The iphone will remain the proper date, whereas iCal ends one week early.
I won't go on longer, but has anyone else had this issue? Maybe you should double check your dates if you have any repeated events scheduled in your phone, and compare them with iCal to double check they are right.
Any help appreciated.
Thanks!
Cam

I guess I should have added that with Outlook, I am connect to Exchange.

Functionality of calendar for repeating events

I have meetings that occur on the same weekday each month, like the 3rd Tuesday. There doesn't seem to be anyway to put that on my calendar. If I ask it to repeat monthly, it does it by date, not day.

Ecosanda,
If you are using iCal/Calendar with Mac OS X, how do I create a repeating event: Apple Support Communities demonstrates how it can be accomplished.
If you are using a device with iOS, it not possible to create an event using those parameters.

ICal for iPhone-Why is there no custom option for repeating events?

I really hate the application iCal on the iPhone, because it won't allow me to enter in an event that happens on the fourth thursday of the month.
Palm has allowed users to make monthly reapeats by day and by date for ten years now. Why can't iCal do the same? I shouldn't have to use my Desktop iCal to enter in repeating custom events!

You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html

Fixed my sound issues in KDE (no sound except for system events)

First, I'd like to say that I am by no means an expert and what I have below represents nearly a week of installing/reinstalling arch and trying various things to get my sound working correctly in KDE. In fact, yesterday I decided that I was just going to use mint because, even though I don't like it, at least the sound worked for me. I did decide to give it one more try this morning and finally was successful.
My system has an AMD A8-3850 processor, which I never would have bought if I had known all of the compatibility issues I would end up having with it. My problem was that I would hear event sounds in KDE (such as the start up sound) but I would get no sound within my browsers and flash and probably elsewhere. Also, even though I was hearing the system sounds, kmix showed my volume at 0% and that my device was muted. Trying to select the device in kmix didn't accomplish anything at all. Because of this, I had a feeling that the problem was that my sound was defaulting to my HDMI sound, which turned out to be right.
I'll try to be as brief as I can about the process I followed.
The first thing I did was get asoundconf from the AUR. I was then able to set my non-HDMI sound card as the default.
johnr@bitstorm ~ % asoundconf list
Names of available sound cards:
Generic
Generic_1
johnr@bitstorm ~ % asoundconf set-default-card Generic_1
johnr@bitstorm ~ %
From that point, I installed PulseAudio and worked my way through the PulseAudio page on the arch wiki. After which, I was able to bring up the PulseAudio Volume Control (pvaucontrol) and turn off my HDMI sound all together.
Still, my sound did not work, though. After some searching I came to this page: http://www.freedesktop.org/wiki/Softwar … ktops/KDE/ which basically said that my kmix wasn't compiled with with pulse audio support. After a search for kmix on the AUR, I came to this package: kdemultimedia-kmix-git
After installing that, I reboot and all is right with the world... or at least my sound in KDE.
So that's it. I am sorry if this is poorly written, I do not write things like this very often. I was so happy, though, that I was actually able to fix it and I did want to share since I imagine that I am not the only one to have this problem.

Hi @shayanaijaz
Thank you for your reply.
Here is a link to HP Notebook PCs - No Sound from the Speakers (Windows 7). You can skip any steps you have previously done.
If after installing the original drivers from the recovery manager you still have an issue with the sound, I suggest you do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 7)
During the recovery you will see an option to backup your personal files to prevent data loss.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
You could also test the audio card just to rule that possibility out.
HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista)
My last suggestion is to contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Sequential Numbers for repeating events

I need iCal to auto number a recurring event. ie. Episode 1, Episode 2, Episode 3...
sure you get the picture... lets say 1 thru 100
-Thanks

When you make a recurring event it goes into the calendar file as a single entry. If it happens that the time window that you are looking at with iCal includes one of its recurrences iCal will display the data - from the original event.
Manually you can make changes to recurring events (£rd episode is at 9 rather than 7) producing detached recurrences, but I don't know what their format is, it can't be done automatically with iCal and I don't think it can be done with Applescript.
Your best bet would be to set up an Applescript to create a series of separate events which it would auto-number.
AK

Repeat event not working correctly

Yosemite 10.10.1 (14B25)
Calendar Version 8.0 (2026)
I've set up custom repeating events before. I work offshore on a fixed schedule, 6 weeks on 3 weeks off. I always start work on a Wednesday and finish on a Tuesday, I've set these up previously as its the easiest way to see if I'm home for a birthday or event of somesort.
However, my schedule has just moved after some time off and now when I set up a new event instead of a perfect 9 week cycle, calenar adds some extra days onto the end of repeating cycles, varying days, sometime 1, 2 or 3 extra.
So, I'm trying to set up my new schedule as follows;
New event - Work
Starts - Wednesday 11/02/15
Ends - Tuesday 24/03/15
Repeat - Custom, Every 9 weeks on Wednesday
End Repeat - After 12 times
Fairly straight forward, my schedule cycle is 9 weeks, so repeat ever 9 weeks on weds, the duration is exactly 6 weeks whilst at work, again fairly straight forward.
This is where I start getting problems,
1st repeat event starts on the correct day (15th April), but the end of the event is 2 days late on 28th June instead of 26th June.
2nd repeat event is the same, starts on the correct day but ends two days late.
3rd repeat event starts correct but ends 3 days late
4th repeat event starts correct but ends 3 days late
This continues, 3 late, 2 late, 1 late, 2 late etc
So I change it to repeat every 63 days, but still get the same error in the length of event?
Can anybody help or is it a flaw in the new version of calendar? I've tried using my iPhone to create the event in the same way but get the same results, extra days on the end?
Thanks

If you do not have the code for the button, and the button, present throughout your timeline travels, then you need to assign the code anytime you leave and return to whatever section(s) it is in. The code only executes in the frame it is in even though you might extend it along the timeline.

Repeating Events for the Fifth Week of the Month

Hello,
I am attempting to create a calendar schedule to distribute to members of my club. Each member is responsible for a certain day of the month (eg, every first monday).
iCal gives me the option to select every First, Second, Third, Fourth, or Last weekday of the month for repeating events. Did Apple forget that some months have five weeks in them, or am I really going to have to schedule events for the fifth week manually?
Thanks,
-Noel
Mac Mini Mac OS X (10.4.8)

Hi Noel,
Welcome to Apple Discussions.
iCal does not have this feature.
I tried playing around by scripting the addition of events with the correct rfc2445 recurrence string, but in iCal the events were placed in the first week of the following month on months with four weeks.
If you want this feature in the future, ask Apple for it.
Best wishes
John M

Repeated events duplicate in iCal if modified on iOS

I'm posting a more generalized version of this question (http://discussions.apple.com/thread.jspa?threadID=2603361&tstart=0); encountering the same issue on an iPod Touch syncing over USB would seem to indicate that neither MobileMe nor anything specific to an iPhone is at fault. My apologies if this is in violation of this forum's rules of etiquette.
Here's how I phrased it on the Feedback page, where I submitted a bug report regarding this issue:
If a repeating event is created in Calendar on iPod Touch (4.2.1), then synced to iCal using iTunes (USB cable sync, rather than MobileMe), then edited on the iPod Touch (i.e. the date or time is changed for all future events), then the iPod Touch is synced again, this will result in two repeating events in iCal on the Mac: one that reflects the changed version of the event, and one that is the original version of the event, each following their own repeating schedule. Please advise as to possible solutions.
Any help anyone can give would be much appreciated. She's got an iMac mid-2008 running 10.5.8, iCal 3.0.8, iTunes 10.1.1, and her iPod Touch is a fourth-gen running 4.2.1. She's quite angry about this issue, and I fear she's about to give up on Apple entirely as a result.

Am facing the same issue with an iPad; but this is not the first time I've seen this happen. It has also happened when syncing from iCal to a Blackberry Curve via Blackberry Desktop Manager. Any repeated events - and not just from the iOS side of things - ANY repeated events cause this to happen.
iCal has the correct number of events and times, but as soon as you sync to another device, it becomes unusable. My wife runs a cleaning business where she constantly has to rearrange schedules for repeating customers. As soon as she does it once, she's got 2 copies of the same. Change the event twice, and suddenly she has 4 copies.
Please help.
todd

W530, W7-64: external monitor is dark except for mouse pointer

Hello,
I'm starting to experience this problem. Initially I had no problems with using an external monitor, but now I cannot use it. When I switch to the external monitor, the screen is dark, except for the mouse pointer which moves correctly.. Anyone know the cause of this problem?
Regards,
bostjanv

I have had same problems using NVIDA Q2000K when using Windows 8. Try configuring with NVIDA instructions for multiple displays as follows:
ThinkPad W530       NVIDIA Quadro K1000M or NVIDIA Quadro K2000M           - Computer's analog VGA connector           - Docking Station's analog VGA connector           - Computer's DisplayPort connector           - Docking Station's DVI connector(s) or DisplayPort connector(s)
      Intel HD Graphics Family           - (Computer's LCD)
DUAL ADAPTER CLONE
Dual Adapter Clone is a technology where display output from one display adapter is cloned to another display adapter. This feature is unique for NVIDIA Optimus Technology starting from second generation Optimus technology. The only difference between cross adapter clone and traditional clone is that the former involves two display adapters while the latter involves only one.
HOW TO CONFIGURE DUAL ADAPTER CLONE
Dual Adapter Clone is only supported and be configured in NVIDIA Control Panel. As an example, the procedure below describes the steps on how to configure the dual adapter clone. Remember that the dual adapter clone involves two different graphics devices, so the 'Display Topology' section above will give you an idea which combinations can support dual adapter clone, otherwise, it is considered as a traditional clone.
The procedure below assumes to use the LCD and DisplayPort monitor connected to the computer. 1. Attach a DisplayPort monitor to the computer. 2. Open the NVIDIA Control Panel, and on the left pane, select 'Setup multiple      displays' under 'Display' tree. 3. On the right panel, under 'Select the display you want to use', check both      LCD and DisplayPort monitor. 4. Under 'Verify your display configuration', right click on either the LCD or      DisplayPort display icon. 5. Select 'Duplicate with 1 (use 2 as source)' then click Apply.
Note: The Dual Adapter Clone can not be enabled by using the Windows display         control panel or the Intel's display control panel.
Windows 8 also disabled my NVIDA Q2000K and I had to restore it. I hope this was helpful.
Jack
Jack

Event handler switch creation (for repeated use )

Im creating a hyperterminal like application which reads from serial port and writes into serial port.
The reading and writing works almost fine..I also wants to create some custom "Key controls" that will send some prestored commands to the serial port.
I currently implemented two commands "ESC" and "FLASH " in the Key controls menu..
I want to send these commands ESC and FLASH each time i click a button in the menu.
I used event handler for it..and put the event handler inside an always running while loop.
But the problem is I can send only these commands only for one time during execution.
Repeated pressing of switches doesnt cause any effects..
Can somebody help please???
Im using labview 6.1. If u modify VIs using higher versions i cant open here..kindly include a jpg screenshot inthat case.
Thanking you.
Stephen.
Attachments:
Serial Port(stable release)1.2.vi ‏113 KB
Init.vi ‏32 KB
Write.vi ‏44 KB

Hi Stephen,
in LV7.1 your events will be executed whenever I press one of the according switches...
Notes:
-Don't make several event structures. Instead make one event structure with several event cases. Read the context help for the event structure!
-I would suggest to set the mechanical action of both switches to "latch when pressed" instead of "switch..." to give a feedback to the user as the switch will be reset after reading it...
-Generally be more styleguide-conform! Use right-click on terminals to create controls/constants to avoid coercion dots (spot the red colored dots in the image?). Make error in/out in the lower left/right of the connector pattern. Avoid block diagrams larger than the screen (or what kind of monitor do you use?).
Edited:
Sorry for weird display. I have to get used to the new image gallery feature of the forum (and will use "image to the left" only on rare conditions). Btw. the preview looks different to the actual post
Message Edited by GerdW on 05-28-2009 06:59 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Handling exceptions for barcode:

Hi,
How can I handle the exceptions for a barcode process? suppose I have a tiff document with 4 pages and 4 barcodes, and if one of them was failed in decoding, my whole process is running into exception. I want to handle that failed barcode alone and send a message to the output variable that the particualr barcode is failed.
I tried using events with default exception handling. I dont know how to configure it and catch the runtime exception. I tried searching in the internet to get some configuration samples for that. I checked the sample from Tour de livecycle. Even that didnt guide me how to configure those exceptions.
Chaitanya

Can someone help me out on this..
Thanks

Exceptions for repeating Events aren't handled correctly on iPod!?

Similar Messages

Maybe you are looking for