Exchange 2007 and iCal issue

Today I set up my MacBook Pro to my work email. We run Exchange 2007. My mail works great. My contacts also works great. For some reason iCal does not work. I get the following error:
"iCal needs a valid email address to connect to the Exchange account "mike (at) worktankseattle (dot) com".
The email address "mike (at) worktankseattle (dot) com" isn't a valid address for your Exchange account. Enter the email address for your Exchange account, and then click OK. "
mike (at) worktankseattle (dot) com is my email. It is valid. This same email works for ical and contacts. Why does it not work with iCal? Any ideas?
Thanks!

I was having this problem as well, but other users in my company were not (Mail and Address Book synced fine, but iCal would not - kept stating that I did not have a valid e-mail address). So, I looked through the Exchange 2007 Management Console on the server, and tried to find inconsistencies between my e-mail account and the users who had no problem with iCal.
It turned out that, for some unknown reason, a check box on my e-mail account ("Hide from Exchange address lists") was checked on mine but not the others. Once I unchecked that option, iCal synced up fine.
So, I would suggest that you speak to your Exchange Admin person and ask them to check your specific E-mail Account Properties Page and have them make sure that this box is not checked. I hope that this helps some of you...

Similar Messages

Free/Busy not working Exchange 2007 and 2013 co-existence

Hi,
I'm migrating our Exchange 2007 environment to Exchange 2013. Now I am in a co-existence environment where all the mailboxes except some test-users resides on Exchange 2007. Between Users on the same Exchange MBX Server athe FREE/BUSY Information sharing
works correctly, but between Exchange 2007 and 2013 it's not working.
I verified my settings and also the EWS virtual directory on 2007 CAS Servers using Get-WebServicesVirtualDirectory.
The internal and the external URLs are set to https://legacy.mydomain.com/....
What am I missing?
Thanks & Kind Regards,
Jürgen

Hi,
According to your description, I understand that the free/busy information between Exchange 2007 and Exchange 2013 is not available for your coexistence environment. To narrow down the issue, please check the following points:
1. Does the issue happen to all users or specific users?
2. Although a user on Exchange 2013 can't get free/busy information from a user on Exchange 2007, please confirm whether Exchange 2007 user can get free/busy information from Exchange 2013 users.
3. Close Outlook and only access user mailbox from OWA to check whether the issue persists. For Outlook client,
create a new Outlook profile
to have a try.
4. Please make sure the virtual directories settings are configured correctly in both Exchange 2013 and Exchange 2007.
Virtual directories settings in Exchange 2007:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-3-step-by-step-exchange-2007-to-2013-migration.aspx
Certificate and Virtual directories settings in Exchange 2013:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-2-step-by-step-exchange-2007-to-2013-migration.aspx
5. Restart IIS service in Exchange server by running iisreset /noforce from a command prompt window.
If possible, please run Test E-mail AutoConfiguration in Outlook to check whether the autodiscover service can get correct Availability service URL in the results. If there is any event logs, please collect some for further analysis.
Regards,
Winnie Liang
TechNet Community Support

ActiveSync in Exchange 2007 and 2013 Coexistence

Hi,
I have exchange 2007 and 2013 coexisting (exchange 2007 sp3 update rollup 13/exchange 2013 SP1)
owa works fine from inside and outside, only that it requires users to authenticate twice when connecting from the external.
autodiscover works well for users on both 2007 and 2013
I have a public SAN certificate from verisign with 2 names on it, mail.mydomain.com and legacy.mydomain.com
I have A records configured for both names on my public DNS and internal DNS
THE ISSUES
testing activesync from testconnectivity.microsoft.com works fine when i run the test using a mailbox on Exch2013 but fails for mailbox on Exch2007.
New users on exch2007 & exch2013 are not able to setup email on their devices (blackberry and windows mobile),
Existing users on exch2007 can no longer receive mails on their mobile devices
URLs
Exchange 2007
Exchange 2013
Internal owa
mydomain.com/owa
mail.mydomain/owa
External owa
legacy.mydomain.com/owa
mail.mydomain.com/owa
AutoDiscover
mail.mydomain.com
mail.mydomain.com
EWS
legacy.mydomain.com
mail.mydomain.com
ECP
mail.mydomain.com
Internal ActiveSync
legacy.mydomain.com
mail.mydomain.com
External ActiveSync
$null
mail.mydomain.com
OutlookAnywhere
legacy.mydomain.com
mail.mydomain.com
I expect that users on exch2013 would be able to setup their mobile devices as the connectivity test completes successfully but it still does not.
Any help on this would be much appreciated ..
Richard ..
..forever is just a minute away*

You don't need to use a legacy URL for ActiveSync in Exchange 2013. It will proxy ActiveSync for Exchange 2007 just fine. In fact, ActiveSync is usually the protocol that gives you the least amount of trouble in a transition. I recommend
you configure your URLs for the proxy configuration and point everything to Exchange 2013 CAS.
http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange 2007 and outlook 2010 frequent disconnects

Hi,
Im having issues on SBS 2008 with exchange 2007 and outlook 2010.
Every so often users disconnect and outlook then requires them to put there password in but if you restart outlook all is fine till the next time its random aswell.
I have checked in IIS if windows and basic authentication are enabled which they are.
If i dont use outlook anywhere i still get this problem.
I have looked on the internet but everything i try doesnt seem to help me any ideas ?
Thanks

Hi,
Before going further, would you please let me confirm whether all users (with all Outlook) encounter this same
issue? Did you install any update or any third-party application on the server before this issue occurred?
à
Im having issues on SBS 2008 with exchange 2007 and outlook 2010.
Would you please let me confirm whether installed Exchange Server 2007 SP2 (or SP3)? Did you install all necessary
Update Rollups for the Exchange Server 2007?
Please type
outlook.exe /safe in RUN to start Outlook in Safe Mode, then check if this issue still exists. Meanwhile, please navigate to the website which contains Exchange Virtual Directories in IIS Manager, then enable kernel-mode authentication for each directory
and monitor the result.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Exchange 2007 Room Calendar Issues

Hello, on our Exchange 2007 server, we have 6 room mailboxes, all setup exactly alike. One of the mailboxes started not responding to calendar requests. If I schedule a meeting, exchange does it's part, and sends out the invitation, but nothing shows in
the room calendar itself. Besides exporting the existing calendar entries and creating a new mailbox, is there anything I can try?
[PS] C:\Windows\System32>Get-MailboxCalendarSettings RadcliffeConf.Room | fl
AutomateProcessing : AutoAccept
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
DisableReminders : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy :
AllRequestOutOfPolicy : False
BookInPolicy :
AllBookInPolicy : True
RequestInPolicy :
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : False
DefaultReminderTime : 15
RemoveForwardedMeetingNotifications : False
Identity : xxxx.com/SDI Users Groups and Computers/
Room Mailboxes/Radcliffe Conf. Room

Hi n3lka
Thank you for your question.
Owing to not respond, you can try to check the mailbox permission.
“nothing show in the room calendar itself”, you can make outlook in cache mode, then, you can try to uncheck option “Download share folders”.
There is a similar thread you can refer to by the following link:
https://social.technet.microsoft.com/Forums/en-US/cb057c90-9eaa-4ead-8b1d-68e8ae87c0b0/exchange-2007-room-calendar-issues?forum=exchangesvrclientslega
when nothing shows in the room calendar itself, you can try to make another user schedule a meeting, if another user schedule a meeting successful, you can refer to the following link to solve it:
https://social.technet.microsoft.com/Forums/en-US/a31af989-aee1-42f0-88bd-c178c6199379/exchange-2007-room-mailbox-and-calendar-issue?forum=exchangesvradminlegacy
If there are any questions, please let me know.
Best Regard,
Jim

Getting UConn 8.5 to work with both Exchange 2007 and 2010

According to the document below, I should be able to set up one Unified Messaging service to access mailboxes on both Exchange 2010 and Exchange 2007 servers. I setup my service to point to 2010 CAS servers and I can access 2010 mailboxes, but testing 2007 mailboxes comes up with an http 200 error. If I setup the CAS server as 2007, I can access 2007 mailboxes, but get an error on 2010 mailboxes. This will be a real pain if I can't do this with one service. I don't want to have to keep Unity Connection updated as users get moved from 2007 to 2010! Anyoe know how to do this?
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html#wp1198171

I got this to work! My Unified Messaging Service was originally setup to Specify an Exchange Server. That is where I had put the DNS name of the CAS server (and that DNS entry pointed to several CAS servers). I changed the Service to Search for Exchange Servers instead and used that same DNS name in the Active Directory DNS Domain Name. When I do the test of this service, it tells me it Failed to locate a Domain Controller via DNS, but that is just informational. It also says it successfully connected to the Exchange CAS server with the autodiscover.xml. Now my mailboxes on both Exchange 2007 and 2010 are able to receive voicemail messages with this one Service configured.

Difference between Exchange 2007 and 2010

Hello,
I want to know what are the differences between Exchange 2007 & 2010, i mean what was missing in 2007 which is addresses in 2010. Both from Administrator point of view and client point of view. How admins are going to benefit from 2010 and how clients
will see changes in their outlook 2010 because of Exchange 2010?
Hasan

Hello,
Can you Please help me out, what is the Difference?
Difference between Exchange 2003 and 2007
Difference between Exchange 2007 and 2010
Thanks

Exchange 2007 and 2013 coexistence

Hi,
we have exchange 2007 and 2013 coexistence. we have created a new url for 2007 legacy servers. Now, when using OWA url (now set for exchange 2013 server) i am getting OWA exchange 2007 login page for exchange 2007 mailboxs.
I was expecting exchange 2013 OWA page and then redirection to OWA 2007.
Thanks

Hello,
Please check your DNS configuration and ISA/TMG rules.
We recommend you use TMG or UAG.
You can refer to the "TMG rules" section in the following article:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-3-step-by-step-exchange-2007-to-2013-migration.aspx
Cara Chen
TechNet Community Support

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

Hi,
From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
http://support2.microsoft.com/kb/2997209
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Exchange 2007 and 2010 with Unity Connection 8.6

Hi all,
We have unity connection 8.6 and exchange 2007 currently in place and runnign fine. I am ready to start migrating mailboxes over to our new exchange 2010 farm and as such we will be in co-exsistance with exchange 2007 and 2010 for awhile. What are the steps or procdures to also include exchange 2010 with the 2007 in unity connections? Currently under Smart Host is the IP address of our exchange 2007 server.
Thank you.

Hi,
This depends on how you plan on performing the migration. I would suggest the following:
-Creating a new unified messaging service for Exch 2010. You can re-use the same service account name as long as you completed the configuration steps for that integration.
-As you move over user's mailboxes from 2007 to 2010, you can delete the 2007 UM service and add the new 2010 UM service. If you want to change many users at a time you'll need to use bulk administration to change them. If you use BAT to change accounts, see the link below where I have listed them out for another CSC user.
-You can change the Smart Host setting once you have configured the Exch 2010 enviornment to handle your main corporate mail (changing the MX records to point to a 2010 Edge Transport).
Changing the UM service with BAT:
https://supportforums.cisco.com/message/3572200#3572200
Good luck.

ICal + Exchange 2007 - recurring events issues

Hi all
Not sure if this has been brought up before, couldn't find anything on the boards.
Anyway, our client has 20 macbook pros all running OS 10.6.2. They also have an Exchange 2007 server (previously they had a 2003 exchange server and were using entourage).
The problem they appear to be having is when creating a recurring event they invite selected users but the invites either don't get through or upon accepting the invite it doesn't show up in the other user's calendar. I've heard there are some issues with iCal and recurring events - is this true or does anyone know a way to fix this?
Thanks in advance.

https://developer.apple.com/bugreporter/
You can also try http://www.apple.com/feedback/macosx.html but I don't think that's as useful.

Exchange 2007 and 2013 Co-existnec - ActiveSync Issue

Hi
We have introduced Exchange 2013 servers in our existing Exchange 2007 environment. We have a customized Exchange 2007 ActiveSync setup i:e we created a custom separate website in IIS for ActiveSync to serve the ActiveSync devices. After the introduction
of Exchange 2013 CAS servers, when we installed the new certificate on them and configured the virtual directory with ActiveSync URLs, the Exchange 2013 servers seems to be receiving Activesync requests but they can't just proxy it to Exchange 2007 for some
reason. following Warning is logged on Exchange 2013 servers:
[Eas] Marking ClientAccess 2010 server MIA-EXCAS01.utg.uvn.net (https://mia-excas01.utg.uvn.net/Microsoft-Server-ActiveSync) as unhealthy due to exception: System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
We still need to install new Certificate on the Exchange 2007 servers. Wondering what could be the issue here, can Exchange 2013 proxy the connection to Exchange 2007 on a custom website ? or it looks for one under Default Website?
Can the absence of new certificate (meaning certificate mismatch) lead to this issue?
Thanks
Taranjeet Singh
zamn

Actually 2013 can proxy ActiveSync to 2007
Please follow this.
1. Set AutodiscoverInternalURL using this command for every CAS server
Set-ClientAccessserver -identity -CAS1 -AutodiscoverInternalURI
https://mail.yourcompany.com/autodiscover/autodiscover.xml (for FQDN , using your CAS NLB name if exist)
2. Set OWA virtualdirectoy (2013) via EAC
Internal URL : https://mail.yourcompany.com/owa External URL : https://mail.yourcompany.com/owa
3. Set ECP virtualdirectory (2013) via EAC
Internal URL : https://mail.yourcompany.com/ecp External URL : https://mail.yourcompany.com/ecp
4. Set OAB virtualdirectory (2013) via EAC
Internal URL : https://mail.yourcompany.com/OAB External URL :
https://mail.yourcompany.com/OAB
5. Set EWS virtualdirectory (2013) via EAC
Internal URL : https://mail.yourcompany.com/EWS/Exchange.asmx External URL :
https://mail.yourcompany.com/EWS/Exchange.asmx
6. Set ActiveSync virtualdirectory (2013) viaEAC
Internal URL : https://mail.yourcompany.com/Microsoft-Active-Sync
External URL : https://mail.yourcompany.com/Microsoft-Active-Sync
For 2007
1. Set AutodiscoverInternalURL using this command for every CAS server
Set-ClientAccessserver -identity -CAS1 -AutodiscoverInternalURI
https://mail.yourcompany.com/autodiscover/autodiscover.xml (for FQDN , using your CAS NLB name)
2. Create DNS record
legacy.yourcompany.com = your CAS2007 NLB (if exist)
3. Set OWA virtualdirectory (2007) via EMC
External URL = https://legacy.yourcompany.com/owa
4. Set ActiveSync (2007) via EMC
Internal URL = https://serverFQDN/Microsoft-Active-Sync <<<< Using for proxy
External URL =
https://legacy.yourcompany.com/Microsoft-Active-Sync <<<< Using for redirect
5. OAB via EMC
External URL = https://legacy.yourcompany.com/OAB
6. EWS via Exchange shell
External URL = https://legacy.yourcompany.com/EWS/Exchange.asmx
FYI

SBS 2008 and Exchange 2007 intermittent Email Issues

Hello
I am having an issue with my SBS 2008 Server and Exchange 2007. After setup, the mail seems to work great for about a week, then the mail just quits working. To get it working again, all I have to do is reboot the server and mail starts working
again. When looking in the event logs, all I come across is transport.exe errors. Any ideas on why it works for 5-10 days, then just quits working? Any help or insight would be much appreciated.
Thanks All

Larry
Here are some of the errors that i am getting:
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account NT AUTHORITY\NETWORK SERVICE; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Josh.Lange.
Error: -1069
Client Machine: SERVERNAME
Client Process: edgetransport.exe
Client ProcessId: 0
Client ApplicationId: Client=Transport
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account NT AUTHORITY\SYSTEM; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVERNAME/cn=Microsoft System
Attendant.
Error: -1069
Client Machine: SERVERNAME
Client Process: Microsoft.Exchange.ServiceHost.exe
Client ProcessId: 0
Client ApplicationId: Microsoft System Attendant Service Let
(Event ID 1022) (Source MSExchangeIS Mailbox Store)
Logon Failure on database "First Storage Group\Mailbox Database" - Windows account WIS\JLange; mailbox /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Josh.Lange.
Error: -1069
Client Machine: SERVERNAME
Client Process: w3wp.exe
Client ProcessId: 0
Client ApplicationId: Client=ActiveSync;UserAgent=Apple-iPhone5C1/1002.329;Action=User=jlange&DeviceId=ApplF18KM7FHFH1C&DeviceType=iPhone&Cmd=Sync
These are a few errors that i get when the mail isn't working. When it stops of the server, the outlook clients show the exchange server disconnected, and active sync will not work either. I can still remote to the server, so i dont think its
an internet connectivity issue. Let me know if you have any other questions. Again, the mail seems to work for about 5-7 days, then i have to reboot the server to get the mail flowing again. Any help or direction would be appreciated.
Thanks for Looking

Exchange 2007 and the Drafts folder

My company uses Exchange for email, and I access it via my iPhone and the mail app. No problems - until we upgraded to Exchange 2007.
Now, drafts saved on my macbook are accessible to my other macs and the web interface - but not to my iPhone. And vice-versa. I now have second folder on my iPhone named "Drafts" that's the Exchange Drafts - but it's not the official "Drafts" folder as far as the iPhone is concerned, doesn't percolate to the top with "Sent", and doesn't allow me to review/send. And now, with my iPad, I have three Drafts folders - since it doesn't sync as the official Drafts folder, it doesn't sync between mobile products, either.
I'm not really holding my breath until MS fixes Exchange, but I'd think this would be higher profile.

Anyone ?
Help with iCal / Address book issue.
User try's to create a calendar event, adding invites, it says they must create card because they are not in address book. It will not take their address.
Is there a way to re-sync iCal/Address book with Exchange 2007 GAL?

Unity 5 with MS Exchange 2007 and Windows Server 2003 Ent w/ SP2

Hello,
We have Unity 5 with Exchange 2007 SP1 on Windows 2003 SP1 Enterprise server. We want to upgrade Exchange to SP2 or SP3 but I could not find enough information, may not have looked in right places.
Does anyone have Unity with Exchange 2007 with SP2 or SP3? has anyone experienced issues with such upgrade?
Thanks,
Paresh.

Paresh,
Here's what you need:
Recommended Service Packs—Message Store
Revised October 25, 2010
•Exchange 2010 Service Pack 1
•Exchange 2007 Service Pack 3
For support information, refer to the "Support Policy for Microsoft Service Packs and Updates" section of Supported Hardware and Software, and Support Policies for Cisco Unity Release 5.x at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.
I pulled this straight from a Cisco document so you could be sure that you are moving to the latest recommended SP for Exchange which is SP3. I have clients running this SP without issue.
Hailey
Please rate helpful posts!

Exchange 2007 and iCal issue

Similar Messages

Maybe you are looking for