Exchange 2010 SP3 - Delayed emails with XLSM attachments...

Running Exchange 2010 SP3 Rollup 5.  Clients running Windows 7 and Office 2010 Pro Plus SP2.  Have one specific user / client that when sending emails with an XLSM attachment around 5:30AM, the email is delayed getting to the Exchange server and
is delayed up to 16 hours.  Unfortunately, this is a random occurrence, and not necessarily easy to duplicate.
The Sent Items on the Outlook client reflect the correct sent time, but the Message Tracking Log on the Exchange server shows the server did not receive the email until approximately 12 to 16 hours later.
The desktop is a shared system and this issue appears to be isolated to the user's profile, AD account, or Exchange.  I've literally blown away the users local profile and reconfigured it with no resolution.
Any suggestions are greatly appreciated.
Fuel

Hi,
Please verify whether there is any error/warning/information message left in App log. If yes, please paste the details without sensitive information.
I suggest re-send a .xlsm attachment for testing to verify whether it delays.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

  • Opportunistic TLS between our Exchange 2010 SP3 on Premise (WIth Edge) and Exchange Online Protection.

    Hi,
    We would like to configure Opportunistic TLS between our Exchange 2010 SP3 On Premise Systems (with Edge) and EOP.
    I can see that Opportunist TLS is enabled on both the send and receive connectors in EOP. SO I think no change required here.
    The On premise Send Connector (Configured by EdgeSync) does not have the option for Opportunistic TLS. Under "Configure Smart Host Authentication Settings" it is currently set to "None". I have the option for "Basic Authentication
    over TLS" but this requires a Username and Password. No option for Opportunistic TLS. When I look at the properties of the send connector (get-sendconnector "sendconnector_name" | fl) I
    can see that the IgnoreSTARTTLS parameter is set to FALSE - so I think that means it is enabled. So I think no changes required here- right?
    The receive connector on the Edge Server has the TLS option on the Authentication tab - so I guess I just check that option right?
    The Edge servers also run TMG and the two are integrated. I don't think this changes anything but thought I would include it in case it does.
    Anything I have missed?
    Thanks very much.
    Geoff
    ilmuro69

    Hi,
    We would like to configure Opportunistic TLS between our Exchange 2010 SP3 On Premise Systems (with Edge) and EOP.
    I can see that Opportunist TLS is enabled on both the send and receive connectors in EOP. SO I think no change required here.
    The On premise Send Connector (Configured by EdgeSync) does not have the option for Opportunistic TLS. Under "Configure Smart Host Authentication Settings" it is currently set to "None". I have the option for "Basic Authentication
    over TLS" but this requires a Username and Password. No option for Opportunistic TLS. When I look at the properties of the send connector (get-sendconnector "sendconnector_name" | fl) I
    can see that the IgnoreSTARTTLS parameter is set to FALSE - so I think that means it is enabled. So I think no changes required here- right?
    The receive connector on the Edge Server has the TLS option on the Authentication tab - so I guess I just check that option right?
    The Edge servers also run TMG and the two are integrated. I don't think this changes anything but thought I would include it in case it does.
    Anything I have missed?
    Thanks very much.
    Geoff
    ilmuro69

  • Exchange 2013 External Incoming Emails With Large Attachments Disappearing No NDR

    I have a problem I am running Exchange 2013 recently upgraded to service pack one hoping to fix the problem no luck changed the ConnectionTimeouts on the recieve connectors no luck, diasabled certain commands chunking and BinaryMime no luck I can recieve
    large attachements internally and send to external users but no user is able to recieve emails with attachments bigger than 1 MB all formats doc,xlsx,pdf etc and there is no NDR the attachment is either stripped or the email disappears into thin air literary.
    I am about to lose my mind over this. This started a month ago howcan I test at what point between the sender and myself the emails are being filtered all other emails come through as long as the attachments are less than 1 MB.

    Hi Bright,
    Agree with Ed, you should check if there is anything between the internet and your exchange server.
    If there is any update , please post here.
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Exchange 2010 SP3 RU6 - Problems with New-MailboxExportRequest

    New-MailboxExportRequest seems to ignore -ExcludeFolders and -IncludeFolders and export the entire mailbox. For example:
    New-MailboxExportRequest -IncludeFolder TestExport -Mailbox TestUser -FilePath \\SomeUNCPath\test.pst
    will exportsthe entire contents of the mailbox. I believe this used to work before, but it is possible I have lost my mind. 
    The folder TestExport is on the root, as in, if you were to run Get-MailboxFolderStatistics, the FolderPath is /TestExport. I've also tried using -ExcludeFolders to exclude every other folder with no luck.
    Any confirmation of an issue or help is appreciated. 

    Hi,
    From your description, I recommend you use the following cmdlet to check the result.
    New-MailboxExportRequest -IncludeFolders "#Inbox#" -Mailbox TestUser -FilePath
    \\SomeUNCPath\test.pst
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Force email download in HTML or text format on iPhone/iPad with ActiveSync (Exchange 2010 SP3)

    Hi,
    When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
    it can be downloaded in three cases of
    intermittents ways :
    - The full message is downloaded in HTML format
    - The message is download in text format and a
    "Download full message" link is displayed
    at the bottom of the message
    - The message is displayed in text format,
    but continues to download the rest of the message.
    When the download is complete, the message is displayed
    in HTML format.
    This behavior is intermittent. The Apple's support
    says it is a particular configuration on Exchange server
    that causes this behavior.
    I want to know if there is a way to fix
    this problem and force download email
    either in text or HTML format ?
    This problem occurs on iPhones/iPad
    (iOS8.2) with ActiveSync account (Exchange 2010
    SP3). It occurs also with Outlook.com account.
    On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
    and MaxEmailHTMLBodyTruncationSize settings are
    unlimited in ActiveSync policies.
    Thank you for your help.

    Hi,
    We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
    Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
    In the console tree, navigate to Organization Configuration >
    Client Access.
    In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
    In the action pane, click Properties.
    Under the Sync Settings tab, check or uncheck the box
    Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
    And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
    Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
    For more information, please refer to this document.
    https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Exchange 2010 SP3 - "500 5.3.3 Unrecognized command" in SMTP Receive Log. Senders get message with the same problem

    Hi
    My exchange environment consist with "Server Exchange 2010 SP3" and "Edge Server with Exchange 2010 SP3".
    On Edge server in SMTP receive log i get every now and then an entry: xxxxxx 500 5.3.3 Unrecognized command.
    It is serius problem because I got few e-mails from senders that they had problem with sending e-mail messages to our e-mail domain. They receive e-mail report, for example
    Technical details of permanent failure:
    Google tried to deliver your message, but it was rejected by the server for the recipient domain domena.plby
    mail.domena.pl.
    [95.xxx.xxx.xx].
    The error that the other server returned was:
    500 5.3.3 Unrecognized command
    Could you help me to solve this problem? What could cause this problem?
    Thank you in advance
    Tomasz
    Kind Regards Tomasz

    I have the same issue, but there is plenty of hard disk storage on the Exchange Server. This seems to only be happening from Google Business account/ Postini. If I send message from my personal Gmail account it works fine, but an agency who is on Google
    business seems to have issues sending to us and they are delayed, sometimes they get through and other times they just don't. 
    Results from Mail Acceptance Test:
    I enter my internal address and the remote users postini account as the test setup I received two emails from the tool but the end results of the test are:
     Error submitting mail
            Mail submission failed: Error message: Syntax error, command unrecognized. The server response was: 5.3.3 Unrecognized command.
    Google support stated this:
    Here are the logs from Postini trying to connect to mydomain.com (IP x.x.x.x) :
    1. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP-STLS:OK <null> TLSv1:RC4-SHA Validate:None 2. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:MAIL FROM:<[email protected]>
    3. 2014/08/09 03:26:28 IP:209.85.218.50 Fdal:Customer has null root_iid outbound default at org 100000001 4, 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender <= FFD:250 Ok 5. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:RCPT TO:[email protected]>
    6. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD => mydomain.com (x.x.x.x):Connection established 7. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD <= mydomain.com (x.x.x.x):220 server.mydomain.com
    ESMTP Service ready 8. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:250 Ok 9. 2014/08/09 03:26:35 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender => FFD:968 last bytes of data with dot 10. 2014/08/09 03:28:05
    IP:209.85.218.50 To:[email protected] From:[email protected]:1119780 FP:2603ec6d38c69886eb1000e516fb745a0384e50b SMTP:Delivery still in progress after 90 seconds, recording FP 11. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP
    LOG: FFD => mydomain.com (x.x.x.x):failed to send the last period(.) 12. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] oremote:Skipping Archive for Sender because did not deliver message 13. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected]
    SMTP:451 Remote connection lost - psmtp 14. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:451 Remote connection lost - psmtp
    As you can see, on line 9, at 03:26:35, we declared to the receiving server what we were about to send. At the line number 10, almost two minutes passed without an authorization (250 OK) from the receiving server. You can see our status being pushed back
    at that moment to the receiving mail server: SMTP:Delivery still in progress after 90 seconds. Two more minutes later the connection was simply dropped and so we generated a 400 error message to encourage the sending server to try again later (since no bounce
    was given per say from the receiving server, we won't hard-bounce it but defer it).
    I hope this will help. you can try to look in the mydomain.com  inbound logs and see at that exact time what happened? Unfortunately, our visibility pretty much ends there as we don't have full visibility of your mail environment. You'll need to investigate
    within your own environment unfortunately. If you have any more information to share with me, in case it might help me help you, feel free to do so. I'll leave this case opened for now.
    Sincerely,
    Patricia
    Google Enterprise Support

  • Email Delivery problem from Mailman to Exchange 2010 SP3 - Invalid Character Set Name in Message Subject

    Dear all,
    we have a problem in the email delivery from Mailman 2.6 List Server to Exchange 2010 SP3 CU7, 
    related to the encoding name of the Message Subject.
    The error we receive is the following:
    #550 5.6.0 CAT.InvalidContent.Exception: InvalidCharsetException, Character set name (iso8859-7) is invalid or not installed.; 
    cannot handle content of message with InternalId
    First of all, we can notice that given an encoding name as 'iso-8859-X',  it is transformed by the Mailman to 'iso8859-X' (without the first dash). 
    Our previous Exchange version ( Exchange 2003) didn't have any problem with this, but now, 
    Microsoft Exchange 2010 doesn't like the form of the encoding name without the dash, 
    and bounces the emails from Mailman. 
    The strange is that other email systems like Gmail, Yahoo accept the transformed encoding name.
    Any help would be appreciated.
    Kind Regards
    Panagiotis Kontogiannis

    Hi Panagiotis,
    Base on my search, I found a similar issue which was caused by the antivirus software in exchange server.
    I recommend you try to disable all the antivirus services and check if any helps.
    The similar thread for you reference:
    https://social.technet.microsoft.com/Forums/en-US/5bcf3098-2fe7-442f-a0bd-b720d703c6d0/problem-with-microsoft-exchange-2010-on-sbs-2011-550-560-catinvalidcontentexception?forum=exchangesvrdevelopment
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Outlook 2010 wont send emails with attachments

    Hello
    I was starting to write the question when we found out what the problem was. So I thought I would share our resolution in here, in case someone fall in the same issue.
    One of my user with Outlook 2010 cannot send emails with attachments of some size. +-50 kb files works fine.
    But when we try a file of 1mb, the mail goes in the Outbox, Exchange status swith from Connected to Disconnected and the email stay there.
    The user is in a remote location, connected through VPN with the network where the Exchange 2013 server is
    Here is what I did:
    1. Re-create Outlook profile: wont work
    2. Re-create Windows profile: wont work
    3. Check ip settings: fine
    4. Try in OWA: wont work
    5. Look at Exchange settings for outgoing email size: 10mb
    6. Load my user's Outlook profile on another LAN: works fine
    That last point made me thought about a potential problem on the remote user's lan. So I did
    7. Check VPN config between the remote site and IT site: fine
    After googling the problem, I found that website (http://community.spiceworks.com/topic/396793-outlook-2010-client-suddenly-showing-disconnected-from-2013-exchange-server) that suggest to change the DNS setting on the client. However, the DHCP of my remote
    user was the router itself, which is giving a DC as primary DNS, and ISP DNS as secondary. I changed the secondary DNS for another DC in our organization, and guess what? Voila! Problem is gone!
    Thinking about it that make not much sense, as the primary DNS is always up the secondary shouldn't be queried. But that's what resolved our problem.
    Hope it helps someone!
    Martin

    Hi Martin,
    Thanks for your sharing:)
    If you have any question about Microsoft Office, welcome to contact us and feel free to post your issue on Office forum.
    Regards,
    Winnie Liang
    TechNet Community Support

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Problems with OWA after installing Exchange 2010 SP3

    Hi,
    I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
    I did a reset for the OWA vritual directory, but nothing helps..
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
    ASP.auth_logon_aspx..ctor() +17
    __ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
    System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
    System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
    System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

    Hi Alelieveld,
    When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
    After you reset the VD, did you restart IIS?
    For more information, please see:
    Reset Client Access Virtual Directories
    http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
    Frank Wang
    TechNet Community Support

  • SME 7.1 not working with Exchange 2010 SP3 UR8v2 and OnTap 8.2.3 7mode

    Followed IMT and installed software that NetApp said would work.Ontap 8.2.3 7-modevmWare 5.0 SP3Microsoft Windows Server 2008 R2 SP1Exchange 2010 SP3 UR8v2NetApp Host Tools 6.0.2SnapDrive 7.1.1SME 7.1 Everything connects fine.  SnapDrive sees my drives.  SME connects to Exchange Server.  However in the process of configuring SME, I get the following error.  I have followed knowledge base article and increased the timeout of DFM connection in registry, but that has not solved the problem.  Has anyone run into this before?  SME 6.1 works fine, but is not compatible with SnapDrive 7.1.1 (causes verifications to fail because server can't mount clone) and lower SnapDrive versions are not compatible with Ontap 8.2.3.  I am in a real bind here. Thanks in advance. 

    the following configuration for SME 7.1 is no longer supported: Windows Server 2008 R2Exchange 2010 SP3 RU1 – RU5WMF/PowerShell 3.0SME 7.1 The supported configuration will now be: Windows Server 2008 R2Exchange 2010 SP3 RU5WMF/PowerShell 4.0SME 7.1 this is because Microsoft does not support WMF 3.0 on Server 2008 R2 running Exchange 2010 SP3, with any RU version.SME 7.1 requires a minimum of PowerShell 3.0 (part of WMF 3.0) in order to run. Feel free to review the Exchange Server Supportability Matrix located here: https://technet.microsoft.com/en-us/library/ff728623%28v=exchg.150%29.aspx. All existing documentation (ISG, Admin Guide, IMT) will be updated shortly to reflect this change in requirements. hope that helps,Domenico.

  • Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

    We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
    message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380   
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793  
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753  
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738  
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302  
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source"
    This is happening on every mailbox we attempt to move. Any help would be appreciated

    Thanks for responding
    I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
    We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
    Here is the entire message from the log:
    11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
    6.0 (Build 7654.0).
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
    Regular Items: 20, 1.906 MB (1,998,818 bytes)
    Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
    FAI Items: 20, 0 B (0 bytes)
    FAI Deleted Items: 0, 0 B (0 bytes)
    11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
    11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380  
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793 
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753 
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738 
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302 
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source
    Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
    PropTags: [ContainerHierarchy; ContainerContents]
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

  • Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500

    I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
    When user login in to OWA where his mailbox is located  on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server  i get Error http 50
    The website cannot display the page :   HTTP 500   »https://URLEXCHANGE2013/owa/auth.owa«
    The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
    URL on Exchange 2013 are different  as fro Exchange 2010.
    I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
    Exchange server 2013 Sp1 is installed on Windows server 2012 R2.

    Assumption  is correct. I have even  enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
    But remember Exchange 2013 is fresh installation on  Windows server 2012 R2.
    IIS LOG
    2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
    443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
    2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
    443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
    2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
    443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
    2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
    302 0 0 9937
    2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
    https://OWA.company.com/ 200 0 0 1015
    2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
    - 200 0 0 671
    2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 0
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 46
    2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 0
    2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 302 0 0 812
    2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
    2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
    500 0 0 187
    2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
    - 200 0 0 8265
    2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
    - 200 0 0 15265
    2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
    HTTPERR  LOG :
    2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
    2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
    2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
    2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
    2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
    Trace login, ok it is xml,  so print is..
    -Request Summary  
    Site

    Process
    8232 
    Failure Reason
    STATUS_CODE 
    Trigger Status
    500 
    Final Status
    500 
    Time Taken
    500 msec 
    Url
    http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ 
    App Pool
    MSExchangePowerShellFrontEndAppPool 
    Authentication
    Kerberos 
    User from token
    companyNT\SM_9c071c4922fd420fb 
    Activity ID
    {8000134C-0001-E300-B63F-84710C7967BB} 
    -Errors & Warnings  
    No.↓ 
    Severity  
    Event  
    Module Name  
    157. view trace 
    Warning 
    -MODULE_SET_RESPONSE_ERROR_STATUS 
    ModuleName
    ManagedPipelineHandler 
    Notification
    EXECUTE_REQUEST_HANDLER 
    HttpStatus
    500 
    HttpReason
    Request Failed 
    HttpSubStatus

    ErrorCode
    The operation completed successfully.
     (0x0) 
    ConfigExceptionInfo
     ManagedPipelineHandler 
     See all events for the request 

  • Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

    The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
    2010 SP3 RU5+ and Powershell 4 are compatible.  But, there is very little actual discussion about how well that works. 
    I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates. 
    Can I get a summary of the caveats and benefits from someone who has actually done this in a
    real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?  
    Also, how has this affected EMC operations?  
    As always thank you in advance!  

    I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present.  Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host.  For example, calling the ActiveDirectory
    module from EMS on an Win 2012 server (ps 3.0) fails.
    I'll double check the extent of this scenario and get back to you.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Exchange 2010 SP3 DAG Witness/Quorom Server Placement with 3 Datacenters

    Hi we have 2 Exchange 2010 SP3 Server in the same Organization in a DAG
    First one in Datacenter 1 in Germany
    Second one in Datacenter 2 in Austria
    There is a Third Datacenter available in Switzerland
    Where should we place the Witness Server?
    Our major concern is not a WAN Link will go down, most time a Datacenter will loose Power for some hours due
    maintenance work or other things.
    Is it a good idea to place the Witness Server in the third Datacenter!?
    We found a Document which some missconception which talks about placing the witness always in
    the primary Datacenter. But the Datacenter Switchover Document for Exchange 2013 says use a third Datacenter.
    Is that also okay for Exchange 2010 or are they totally different?
    Thank you in advance
    Troga

    Hi,
    It is a new configuration option in Exchange 2013 that we use a third location for hosting the witness server.
    Placing FSW in the third location will privide the ability automatically failover databases to the other datacenter in response to a datacenter-level failure event.
    For more details, you can look at the "Witness server placement considerations" section in the following article.
    http://technet.microsoft.com/en-us/library/dd298065(v=exchg.150).aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

Maybe you are looking for

  • Extended search problem in SRM

    Hi, We have a problem with extended search in SRM while checking the status. In Status If I have selected 'Awaiting approval' and clicked on start button, now it is showing all the SC of awating approvals status. If I have selected 'In approval inbox

  • Critical_process_died Sin Soluccion

    Buenas, tengo el tipico mensaje de critical_process_died y busco soluciones y no la encuentro, anteriormente vi un mensaje de otra persona con el mismo problema diciendo que deveria restaurar sistema, y lo hago y me sale, la unidad donde esta instala

  • Clumsy workflow ?

    I'm looking for a better way for a particular workflow I've settled into. I import a bunch of images and then quickly sort my keepers by assigning a 5 star rating. I then create a project smart album of all 5 star rated images - which I look at as th

  • My internet will all of a sudden not connect to Firefox, but it will connect to Internet Explorer. What's wrong?

    I tried to load a few websites on my Firefox browser, but it said it was "Unable to connect." I then tried to load the same websites on my Internet Explorer website and it connected fine. I'm not sure why this is happening.

  • Winrm input field

    Hi, I have a lame question. What character or input command do I use with Winrm after executing a successful command. I get the  >> prefix. What is the help command. I've tried all the ones that I can think of. It's like it's expecting more input. De