Exchange 2010 SP3 - Delete messages in a folder

Hi
We have an Exchange 2010 SP3 server. One user has a folder ("Inbox\Firewall Alerts") containing about 300,000 messages.
How can I use PS to delete all messages older than 10 days in this folder?
Best regards Harald

Hi,
You can create a personal tag and apply it to this custom folder named "Firewall Alerts" under the Inbox folder. This personal tag will overwrite the DPT or RPT applied to this folder or items in it.
If these messages have the same subject or sender, you can also consider to use the Search-Mailbox -SearchQuery -DeleteContent command to delete these mails older than 10 days. But there is a limit, it's 10000 at a time if a search query is specified when
you run this command.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM

Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DK

Hello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help!

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

Hi,
Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
Thank you

I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure. If you mean "a folder that can contain calendar items", that is not a calendar
item itself.
Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?" If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
pretty unruly with the more that you have. I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
to). And anyone will tell you that you want to restrict anyone from creating their own folders at the root level. In fact, this is the default setting for a new Exchange 2010 installation.
I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

Exchange 2010 SP3 - "500 5.3.3 Unrecognized command" in SMTP Receive Log. Senders get message with the same problem

Hi
My exchange environment consist with "Server Exchange 2010 SP3" and "Edge Server with Exchange 2010 SP3".
On Edge server in SMTP receive log i get every now and then an entry: xxxxxx 500 5.3.3 Unrecognized command.
It is serius problem because I got few e-mails from senders that they had problem with sending e-mail messages to our e-mail domain. They receive e-mail report, for example
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain domena.plby
mail.domena.pl.
[95.xxx.xxx.xx].
The error that the other server returned was:
500 5.3.3 Unrecognized command
Could you help me to solve this problem? What could cause this problem?
Thank you in advance
Tomasz
Kind Regards Tomasz

I have the same issue, but there is plenty of hard disk storage on the Exchange Server. This seems to only be happening from Google Business account/ Postini. If I send message from my personal Gmail account it works fine, but an agency who is on Google
business seems to have issues sending to us and they are delayed, sometimes they get through and other times they just don't.
Results from Mail Acceptance Test:
I enter my internal address and the remote users postini account as the test setup I received two emails from the tool but the end results of the test are:
Error submitting mail
Mail submission failed: Error message: Syntax error, command unrecognized. The server response was: 5.3.3 Unrecognized command.
Google support stated this:
Here are the logs from Postini trying to connect to mydomain.com (IP x.x.x.x) :
1. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP-STLS:OK <null> TLSv1:RC4-SHA Validate:None 2. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:MAIL FROM:<[email protected]>
3. 2014/08/09 03:26:28 IP:209.85.218.50 Fdal:Customer has null root_iid outbound default at org 100000001 4, 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender <= FFD:250 Ok 5. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:RCPT TO:[email protected]>
6. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD => mydomain.com (x.x.x.x):Connection established 7. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD <= mydomain.com (x.x.x.x):220 server.mydomain.com
ESMTP Service ready 8. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:250 Ok 9. 2014/08/09 03:26:35 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender => FFD:968 last bytes of data with dot 10. 2014/08/09 03:28:05
IP:209.85.218.50 To:[email protected] From:[email protected]:1119780 FP:2603ec6d38c69886eb1000e516fb745a0384e50b SMTP:Delivery still in progress after 90 seconds, recording FP 11. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP
LOG: FFD => mydomain.com (x.x.x.x):failed to send the last period(.) 12. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] oremote:Skipping Archive for Sender because did not deliver message 13. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected]
SMTP:451 Remote connection lost - psmtp 14. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:451 Remote connection lost - psmtp
As you can see, on line 9, at 03:26:35, we declared to the receiving server what we were about to send. At the line number 10, almost two minutes passed without an authorization (250 OK) from the receiving server. You can see our status being pushed back
at that moment to the receiving mail server: SMTP:Delivery still in progress after 90 seconds. Two more minutes later the connection was simply dropped and so we generated a 400 error message to encourage the sending server to try again later (since no bounce
was given per say from the receiving server, we won't hard-bounce it but defer it).
I hope this will help. you can try to look in the mydomain.com inbound logs and see at that exact time what happened? Unfortunately, our visibility pretty much ends there as we don't have full visibility of your mail environment. You'll need to investigate
within your own environment unfortunately. If you have any more information to share with me, in case it might help me help you, feel free to do so. I'll leave this case opened for now.
Sincerely,
Patricia
Google Enterprise Support

Email Delivery problem from Mailman to Exchange 2010 SP3 - Invalid Character Set Name in Message Subject

Dear all,
we have a problem in the email delivery from Mailman 2.6 List Server to Exchange 2010 SP3 CU7,
related to the encoding name of the Message Subject.
The error we receive is the following:
#550 5.6.0 CAT.InvalidContent.Exception: InvalidCharsetException, Character set name (iso8859-7) is invalid or not installed.;
cannot handle content of message with InternalId
First of all, we can notice that given an encoding name as 'iso-8859-X', it is transformed by the Mailman to 'iso8859-X' (without the first dash).
Our previous Exchange version ( Exchange 2003) didn't have any problem with this, but now,
Microsoft Exchange 2010 doesn't like the form of the encoding name without the dash,
and bounces the emails from Mailman.
The strange is that other email systems like Gmail, Yahoo accept the transformed encoding name.
Any help would be appreciated.
Kind Regards
Panagiotis Kontogiannis

Hi Panagiotis,
Base on my search, I found a similar issue which was caused by the antivirus software in exchange server.
I recommend you try to disable all the antivirus services and check if any helps.
The similar thread for you reference:
https://social.technet.microsoft.com/Forums/en-US/5bcf3098-2fe7-442f-a0bd-b720d703c6d0/problem-with-microsoft-exchange-2010-on-sbs-2011-550-560-catinvalidcontentexception?forum=exchangesvrdevelopment
Best regards,
Niko Cheng
TechNet Community Support

Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetPropsSpecific [7]
    Lid: 21921   StoreEc: 0x40380
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetReceiveFolderTable [104]
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetAllPerUserLtids [125]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 29793
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 25738
    Lid: 18570   StoreEc: 0xFFFFFA84
    Lid: 23370   StoreEc: 0xFFFFFA84
    Lid: 24302
    Lid: 32494   StoreEc: 0xFFFFFA84
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
   at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
   at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
   at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciated

Thanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetPropsSpecific [7]
    Lid: 21921   StoreEc: 0x40380
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetReceiveFolderTable [104]
    Lid: 31418   --- ROP Parse Done ---
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropGetAllPerUserLtids [125]
    Lid: 17082   ROP Error: 0xFFFFFA84
    Lid: 29793
    Lid: 21921   StoreEc: 0xFFFFFA84
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0xFFFFFA84
    Lid: 25738
    Lid: 18570   StoreEc: 0xFFFFFA84
    Lid: 23370   StoreEc: 0xFFFFFA84
    Lid: 24302
    Lid: 32494   StoreEc: 0xFFFFFA84
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
   at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
   at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
   at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
   at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
   at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
   at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
   at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
   at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Exchange 2010 SP3 installation Problem

Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
Below the complete error from Exchange Setup Logs
[02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
[02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''
[02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
[02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
[02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
[02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
[02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
[02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
[02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
[02/16/2014 05:03:04.0333] [0] End of Setup
[02/16/2014 05:03:04.0333] [0] **********************************************

Hi,
As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
Based on my research, there is no Microsoft article about the hotfix of KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
Thus, to get more professional and faster help, I recommend you contact with our following support:
https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2010 SP3 CU7 Index / Search not Indexing / no result

I Have Problemes with an Exchange 2010 Sp3 Ru7 Server. The SearchEngine does not index anything. No Database have index Data. When i went to OWA no Searchresult on Server.
I have start the resetsearchindex etc. The Microsoft-Exchange-Troubleshooters/Operational gives no error, Mailbox Repair also no error. When i start resetsearchindex the Folder in the Database Directory ist going delete an renew. Then he create 19Files but
nothing more happend.
i configure Perfmon to see activity. There i see that under MSFTESQL-ExchangeCatalog the Counter ""Batches completed w/errors 1800"
After few hours an error in Eventlog came.
Die Exchange-Suchindizierung hat die Indizierung der Postfachdatenbank Mailbox_Database_01 (GUID = b69e081c-65d8-49a9-8a82-0cdc16333380) aufgrund eines Fehlers (Microsoft.Exchange.Msfte.BatchTimeoutException: Timeout detected for batch Database Guid:b69e081c-65d8-49a9-8a82-0cdc16333380;
NumberOfFailedDocuments:0; ShouldIsolateError: False; SubmitTickCount:38475899; BatchKind:RetryMailbox; Number of entries:100) vorübergehend deaktiviert.
Anyone an Idea ?
Thanks for Help- Thomas

Hi,
Here are some suggestions, please try these to check result.
Please check to see if you are using a 3rd party disk defragmenter. If you are using this type of software, stop all the 3rd party defragmentation services temporarily.
Please check to see if the CatalogData folder is being scanned by file-level antivirus OR on-demand antivirus. If it is, reconfigure both file-level and on-demand antivirus, so it is not scanning the CatalogData folder.
Please turn up logging to expert for MSExchange Search Indexer\Configuration and MSExchange Search Indexer\General.
Please rebuild search catalog and check if event 110 is logged in the application log. Event 110 means the full crawl is completed successfully.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Exchange 2010 SP3 (CU

Exchange 2010 SP3 with Update ROllup 8-v2
Event Viewer/APP contains a lot of this errors:
Content Indexing function 'CISearch::EcGetRowsetAndAccessor' received an unusual and unexpected error code from MSSearch.
Mailbox Database: Production Databases
Error Code: 0x80041606
We have tried with runing: C:\Program Files\Microsoft\Exchange Server\V14\Scripts\ResetSearchIndex.ps1 on Exchaneg server and restarting Information Store, but errors still appear.
Any hints how to fix this error?
With best regards
bostjanc

Hi,
Basically there's a problem with the catalog data for the database, we need to recreate it. Please try the following method first to check this issue.
On the Exchange server that's hosting the database that's giving you the error. Start > In the search/run box type services.msc {enter} > Locate the Microsoft Exchange Search Indexer Service and stop it.
Navigate to the folder that holds the problem Database (By default, the path is: C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\Mailbox Database). Within the folder you will find another folder called CatalogData-xxxxxxxxxxxxxxxxxx > Delete this
folder.
Then restart the Microsoft Exchange Search Indexer Service.
The catalog will now rebuild.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Correctif cumulatif 2 Exchange 2010 SP3

Good day ,
I did migration from exchange 2003 to exchange 2010 SP3 everything work fine except the Public folder migration didn't work When I find the MSExchange Store Driver 1020 Event recomend to install correctif cumulatif 2 Exchange 2010 SP3 to
fix the problem
http://support.microsoft.com/kb/2855083
If I install I don't have any impact about my configuration of exchange 2010 it's safe ?
Regards
e

Hi,
Firstly, I’d like to explain, it’s safe to install the Update Rollup 2 for Exchange Server 2010 SP3.
Alternatively, since the error is always caused by an empty server container, we can remove the container to resolve the issue:
1.Start the ADSI Edit tool. To do this, click Start , click Run , type adsiedit.msc , and then click OK
2.Expand Configuration Container [servername.domainname.com] , and then expand CN=Configuration,DC=DomainName,DC=com
3.Expand CN=Services, expand CN=Microsoft Exchange, and then expand CN=OrganizationName where OrganizationName is the name of your Exchange organization.
4.You will see the empty Administrative Group. Expand the CN=AdministrativeGroupName
5.Expand CN=Servers
6.Verify there are no server objects listed under the Servers container
7.Right click on the emtpy CN=Servers Container and choose Delete.
http://support.microsoft.com/kb/2487271
http://blogs.technet.com/b/exchange/archive/2010/05/05/3409916.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Rollup 6 for Exchange 2010 SP3

Does anyone know when Microsoft is going to release either Rollup 6 or a patch for Exchange 2010 SP3? Rollup 3 for SP3 introduced the following issues:
“Some users (not all of them) report that they don't see new emails in their Outlook 2010 box on Shared folders, even though they got the new email message envelope. When they change folder and back to the Inbox the new mail is suddenly visible. Same sort
of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.”
We have installed Rollup 5 but it did not address the issue.
Thanks
Dave

Hi,
Currently, there is no official document about the release of RU6 for Exchange 2010 SP3. If the RU6 for Exchange 2010 SP3 will be coming, you can find this information in the Exchange Team Blog.
http://blogs.technet.com/b/exchange/
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Removed Exchange 2010 SP3 Rollup 8; some clients still having Outlook issues

We have removed Exchange 2010 SP3 Rollup 8 and rebooted the Exchange servers; but some Outlook clients are still experiencing the issues where calendar appointments can't be saved. They get "the item cannot be saved to this folder. The folder was deleted
or moved or you do not have permission." Then "the operation failed". Everyone has created new Outlook profiles. This fixes some computers; but not all. This is happening on Windows 7 with Office 2010 and Windows 8.1 with Office 2010.
Does anyone have a fix?
Thanks!
Mary Cato

Hi Mary,
Is there the same issue when using OWA ?
If OWA is ok, except recreate outlook profile, I also recommend you try moving mailboxes to another database and check if any helps.
Best regards,
Niko Cheng
TechNet Community Support

Problems with OWA after installing Exchange 2010 SP3

Hi,
I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
I did a reset for the OWA vritual directory, but nothing helps..
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
ASP.auth_logon_aspx..ctor() +17
__ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

Hi Alelieveld,
When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
After you reset the VD, did you restart IIS?
For more information, please see:
Reset Client Access Virtual Directories
http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
Frank Wang
TechNet Community Support

Exchange 2010 SP3 - Delete messages in a folder

Similar Messages

Maybe you are looking for