Exchange 2010 SP3 Failing to Install "The remote procedure call failed"
I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
Here is the exchange setup logs output:
[11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
[11/15/2014 09:10:52.0512] [2] Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
Error code 0X8000500D (20493): This property can't be found in the cache.
[11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
[11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
[11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
[11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
[11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
[11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
[11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
[11/15/2014 09:14:12.0977] [0] End of Setup
[11/15/2014 09:14:12.0977] [0] **********************************************
Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
Exchange Management Console-Local
2652
45
00:00:18.9698426
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
0
Exchange Management Console-Local
2652
9
00:00:37.7834262
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
remote procedure call failed.'. --- End of inner exception stack trace ---
0
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
Hi,
Please try to remove the Water mark and Action keys under
HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
After that, reboot the server and rerun the set up.
This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
Best Regards.
Similar Messages
-
I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>16000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
<EventRecordID>58</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<ErrorMessage>%%2147944126</ErrorMessage>
<ErrorCode>0x800706BE</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
<EventID>16010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
<EventRecordID>59</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
<ErrorCode>15005</ErrorCode>
<DataItemName>Parameter0</DataItemName>
<EventPayload>
</EventPayload>
</ProcessingErrorData>
</Event>Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful. -
The Remote Procedure call failed error in Microsoft Direct Access configuration
Hi,
I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
it fails with the remote procedure call failed error.
Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
Thanks,
Arifsql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support -
sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
COMException: 800706be: The remote procedure call failed
Hi all,
access microsoft com using java thread.some time time it works some time it gives error as given :
com.develop.jawin.COMException: 800706be: The remote procedure call failed.
at com.develop.jawin.marshal.GenericStub.dispatchInvoke0(Native
Method)
at com.develop.jawin.marshal.GenericStub.dispatchInvoke
(GenericStub.java:83)
at com.develop.jawin.DispatchPtr.invokeN(DispatchPtr.java:169)
at com.develop.jawin.DispatchPtr.invokeN(DispatchPtr.java:153)
at com.develop.jawin.DispatchPtr.invoke(DispatchPtr.java:135)
...For minor problems reboot
For major problem reinstall
Good luck -
Hi All,
I have a two node 2003 cluster, When any one of the cluster node holding resources goes down, the resources are not failing over to the running node.
In the running node I receive the pop-up error message
""An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).""
After I click on ok on the pop-up error message the resources are coming online on the running node. If I dont click ok the pop-up error message. The Cluadmin screen is not responding and the resources are not coming online.
In the cluster log i see the below messages realted to Error ID 1726
00000874.00000b10::2014/03/17-23:38:58.276 WARN [EVT] EvtBroadcaster: EvPropEvents for node 2 failed. status 1726
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: SystemTime= 3/17/2014 23:38:58:276
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: GeneratingComponent= 2
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Status= 0xc002100b
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Detection Location= 641
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Flags= 0x0
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Number of Parameters= 2
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
How to FIX this issue?
Regards,
Stunner.Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Base on my experience, it may cause by some of one resource abnormal
failure, I suggest that please schedule a down time to run “Repair Active Directory object” in “Simulate Failue of this resource” status. And the operation “Repair Active Directory Object” will force to update the object’s attributes.
More information:
Understanding the Repair Active Directory Object Recovery Action
http://blogs.msdn.com/b/clustering/archive/2013/12/13/9067582.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
Hi,
I am getting the error while i am trying to open an Infopath file from a WCF service using InterOp.
var task = Task.Factory.StartNew(() =>
objInfApp = new Microsoft.Office.Interop.InfoPath.Application();
objInfXDoc = objInfApp.XDocuments.Open(xmlPath);
task.Wait(this.waitInterval);
if (!task.IsCompleted)
this.AddToLogFile("Time out occured", EventLogEntryType.Warning);
this.KillInfopathProcess();
The error occurs when this line is executed
objInfXDoc = objInfApp.XDocuments.Open(xmlPath);
Can anyone please help me. I have been stuck here for some time now.
Thanks in advance
Arjun Menon U.KHi Arjun Menon U.K,
Could you reproduce this issue in a common Windows Form application?
As far as I know, Microsoft does not currently recommend, and does not support, Automation of
Microsoft Office applications from any unattended, non-interactive client
application or component (including ASP, ASP.NET, DCOM, and NT Services),
because Office may exhibit unstable behavior and/or deadlock when Office is run
in this environment.
You can get more detail about it from link below:
Considerations for server-side Automation of Office
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Java2 SDK SEv1.4.1_01-Win Install Failure - remote procedure call
Whenever I try to install the J2 SDK 1.4.1 on Windows XP Pro, everything works til the actual install is supposed to start. It just hangs there. When I hit the Cancel button, nothing happens; so I have to use task manager to cancel it. Afterward a small window with a message saying "An error occurred while launching the setup. The remote procedure call failed". I found a similar posting last spring for XP & J2 SDK 1.4.0, but there was no resolution posted. Does anybody know what the problem is?
I would be very interested in a solution for this problem as well. I get father. The installer runs all the way through until it is done (100%). But it does not complete and hangs. If I cancel install the error dialog with the following message. "An error occurred while launching the setup. The remote procedure call failed." appears. This is also an Windows XP Pro machine.
-
Sql server configuration manager remote procedure call failed(0x800706be)
Hi,
My Sql Server Management Studio working well. But When I open Sql server configuration manager I Got an error
“Remote procedure call failed (0x800706be)”
I tried Goggling the problem and solve it but I am not getting any valuable
solution. Is anyone solve this problem
I attach snap here
MySql Server Details:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64) Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: )This error appears to happen when .mof files (Managed Object Format (MOF)) don’t get installed and registered correctly during set-up. To resolve this issue, I executed
the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Regards,
Basit A. Farooq (MSC Computing, MCITP SQL Server 2005 & 2008, MCDBA SQL Server 2000)
http://basitaalishan.com
cau u pls tell me how to type this command on command prompt. I also have the same error in sql server 2008. I allready have sql server 2008 sp2 installed. When I was trying to type this command as it it by copying this full command to command prompt it
shows that command not found as follows
C:\>mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmpr
oviderxpsp2up.mof"
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
File 'C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2
up.mof' not found!
please tell me step by step
thanks
nravhad -
Remote procedure called failed
I have sql server 2008 installed with Business intelligence development studio. When I goes to configuration manager to check whether sql server is running or not it showing a message like
remote procedure called failed. When I googled it then it ask me to install sql server 2008 r2 sp1. After that I also installed sql server 2008 r2 sp1 then also it showing the same error.
Plz help me on this.
nravhadHello,
I would like you to see below two articles
http://thesqldude.com/2012/12/05/sql-server-2012-configuration-manager-wmi-error-remote-procedure-call-failed-0x800706be/
http://social.technet.microsoft.com/Forums/sqlserver/en-US/d9359da1-7793-4b6c-b4e0-ffd332a1c613/remote-procedure-call-failed-in-sql-server-configuration-manager
Also 2008 R2 has now SP2.You could try to update to SP2 also and see if it helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Remote procedure call failed and did not execute response after changing contents
Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen -
Remote Procedure Call Failed - Verifying Account prior to establishing PIN as sign in option
PC Settings / Accounts / Sign in options / PIN / Verify Account info / : I enter my Microsoft Account password and receive the following message:
"Remote procedure call failed"
Cannot cancel - screen keeps reappearing.
I have successfully established a sign-in PIN for my Win 8.1 desktop. The above problem is occurring only on my Win 8.1 laptop.Hi,
Sorry for my late reply.
Regarding the issue, please ensure that RPC service is start.
If it stops, I suggest you perform the following step to start it.
1.Press Win+R, and type regedit, then press enter.
2.Please navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RpcSs and
locate Start registry key
Double click on Start and edit the value:
Change Startup type :
Automatic - 2
Manual - 3
Disabled - 4
Automatic (Delayed Start) - 2
Note: When you change to Automatic (Delayed Start) a new key DelayedAutostart is created with value 1.
When you change to Automatic from Automatic (Delayed Start), DelayedAutostart change value to 0.
If it cannot start, please refer to the following article to test it.
"Could not start the Remote Procedure Call (RPC) Service. Error 1058" error message when you manually start the Remote Procedure Call service
http://support.microsoft.com/kb/838428
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SQL Server Agent gives- Remote procedure call failed (0x800706be)
I can't access SQL Server 2008 R2 remotely on Windows 2008
1. TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit)
2. Firewall disabled to make sure its not interferring with things.
I noticed the SQL Server Agent is Stopped. Not sure if this is the issue. When I try and turn this from disabled to Automatic or Manual, I get this error:
Remote procedure call failed (0x800706be)
It shouldn't be this difficult.
Thank you for your help in advance!Any luck?
The following thread is on the same topic with solutions:
http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/75933d1c-f142-459e-b7dc-d43ad4f8f93f/
Kalman Toth SQL SERVER 2012 & BI TRAINING
New Book:
Beginner Database Design & SQL Programming Using Microsoft SQL Server 2012
Maybe you are looking for
-
How to help remove a song from iTunes?
How do you remove a song from iTunes?
-
Hello there I got a table with data like this: http://www.geocities.com/crisrobin100/ex_input.gif This table give me the amount of hours (value) starting in a date I can query from another table according to the owner_id and the amount of consecutive
-
Calling vb function from oracle
i'm new to oracle. but i need to work with this for my project. what i required is a function return in VB should be called from oracle by trigger. anyone tell me whether this is possible and if possible tell me how to do it. it's very urgent. kindly
-
The Photoshop Elements and Premiere Elements (Serial numbers - [removed]) have been registered with you. The products will not let me edit photos. The system asks me to accept a trial subscription. I have just purchased this product and don't need
-
Transfer CS6 to mac from windows
request transfer photoshop CS6 from windows to mac