Exchange 2010 SP3 Installation Failed. - Error While Locating Source (Windows Installer)

Hey Guys,
Urgent question here:  I was trying to install SP3 for Exchange 2010. Unfortunately it failed on the install (all pre-requisites checked and passed). The problem: Windows Installer couldn't find a the exchangeserver.msi file. This happened immediately
after setup stopped the services.
I tried re-downloading the service pack and reinstalling, I got the same error. Anytime I selected the file using browse it failed and re-prompted me.
Error:
"click ok to try again or enter an alternate path to a folder containing the installation package "exchangeserver.msi" in the box below"
So here is what I did:
1) I reset all the services to automatic (the same way as before)
2) Rebooted the server
3) All Service started
4) DAG replication is working
I am going to work on figuring out how to fix the issue, however will this be a problem? will there be any data corruption? am I safe to let the server sit until I can open a ticket (if needed) ?
Thanks,
Robert
Robert

Hi,
Thank you for your question.
In order to resolve it, we could click the Browse button in the dialog box, locate the ExchangeServer.msi file, and then click OK
to continue the installation. The ExchangeServer.msi file is located on the Exchange Server 2010 installation media。
There are a referred link for us:
https://support.microsoft.com/en-us/kb/2888399
If there are any questions regarding this issue, please be free to let me know. 
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

  • Exchange 2010 SP3 /PrepareAD failing; "A reboot from a previous installation is pending. Please restart the system..." error

    I am attempting to prepare our Exchange 2010 Server (RTM) for an upgrade to SP3.
    When attempting to run "setup.com /PrepareAD" to prep the AD schema, the command fails and I receive the following error in the ExchangeSetup log:
    [12/19/2013 21:50:48.0650] [1] Beginning processing Get-OrganizationConfig
    [12/19/2013 21:50:48.0665] [1] Searching objects of type "OrganizationConfig" with filter "$null", scope "SubTree" under the root "$null".
    [12/19/2013 21:50:48.0806] [1] Previous operation run on domain controller 'DC1.company.com'.
    [12/19/2013 21:50:48.0806] [1] Preparing to output objects. The maximum size of the result set is "unlimited".
    [12/19/2013 21:50:49.0945] [1] Ending processing Get-OrganizationConfig
    [12/19/2013 21:51:42.0753] [1] [REQUIRED] A reboot from a previous installation is pending. Please restart the system and rerun setup.
    [12/19/2013 21:51:43.0190] [1] Ending processing test-setuphealth
    [12/19/2013 21:51:43.0221] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    [12/19/2013 21:51:43.0283] [0] End of Setup
    I am receiving this error when attempting to run "setup.com /PrepareAD" from either of our two GCs and I get the same error from both GCs, so the issue doesn't appear to be related to the individual servers.
    What should I be checking, to clear this error so the AD schema update can be performed?
    Environment
    Exchange:  Exchange Server 2010 RTM
    Server: Windows 2008 R2 (fully patched)
    Domain and Forest functionality: Windows 2008 R2 native

    One follow up:
    If I go into regedit, I see that under HKLM\System\CurrentControlSet\Control\Session Manager  there is an entry from when I recent installed Google Chrome.
    The entry looks like:
    MultiString: PendingFileRenameOperation
    Value Data: \??\C:\Program FIles (x86)\Google\Chrome
    Is this "pending rename" what's causing SP3 to refuse to install, because it thinks the OS install state isn't 'clean'?

  • Exchange 2010 SP3 Upgrade Failed

    Dear All,
    I'm trying to upgrade Exchange 2010 on SP2 or 3 but I'm getting below error.
    Setup encountered a problem while validating the state of Active Directory: An Active Directory error 0x51 occurred when trying to check the suitability of server 'Server.Domain.Com'. Error: 'Active directory response: The LDAP server is unavailable.'
    I have 3 DCs
    PDC 2003
    ADC 2003
    ADC 2008 R2, All FSMO Roles are on 2008 R2.
    Exchange 2007 SP3 is in place with 1 Exchange 2010 box which is working fine.
    Please help me in this regard.
    Thanks in advance.

    Hi
    Can you ping your DC from your exchange server?  On exchange 2010 can you run the following from your EMS, what does the results give you?
    Get-ADServerSettings | fl

  • Exchange 2010 SP3 upgrade fails at stopping services for Management tools station

    Attempting to upgrade a Windows 7 SP1 64bit virtual machine from Exchange 2010 SP2 management tools to SP3 fails with the following error:
    Summary: 11 item(s). 1 succeeded, 1 failed.
    Elapsed time: 00:15:19
    Preparing Setup
    Completed
    Elapsed Time: 00:00:00
    Stopping Services
    Failed
    Error:
    The following error was generated when "$error.Clear();
              & $RoleBinPath\ServiceControl.ps1 -Operation:DisableServices -Roles:($RoleRoles.Replace('Role','').Split(',')) -SetupScriptsDirectory:$RoleBinPath;
              & $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
            " was run: "Service 'NetBT' failed to reach status 'Stopped' on this server.".
    Service 'NetBT' failed to reach status 'Stopped' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:15:19
    Here is the powershell execute policy:
    PS C:\> Get-ExecutionPolicy -list
    Scope                                            
    ExecutionPolicy
    MachinePolicy                                               
    Unrestricted
    UserPolicy                                               
    Unrestricted
    Process                                                  
    Undefined
    CurrentUser                                               
    RemoteSigned
    LocalMachine                                               
    RemoteSigned

    Hi Bad Dos,
    Any updates?
    You can also try to uninstall sp2 Management Tool first, then install SP3 directly. 
    Frank Wang
    TechNet Community Support

  • "Installation Failed" error while installing Adobe Edge Animate.

    I am having trouble while installing Adobe Edge Animate from Adobe Application Manager. The downloading is always stucked at 1% and after 5 minutes, I get the error "Installation Failed". The screenshot is attached.

    Hi Ahsan,
       Update your Adobe Application Manager from the below URL and start the download again:
    http://www.adobe.com/applicationmanagerpatch/index.html
    Regards,
    Jairaj

  • Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

    Hi there:
    We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
    Quick briefing:
    Followed this instructions:
    http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
    * Created CRAWL RULE
    - Used Domain Admin for content access ---> IS THIS WRONG?
    - Domain Admin can access public folder thru Outlook Web Access (checked)
    - Included all items in this path
    PRINTSCREEN 1
    * Added a content source for Exchange Server public folders
    - Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
    - Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
    PRINTSCREEN2
    * Did a FULL CRAWL
    PROBLEM:
    - Search results does not throw "correct data". Some items are not being found
    CRAWL LOG is reporting: Error while crawling LOB contents
    Detailed error message:
    https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
    Error while crawling LOB contents.
    Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
    The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
    System.InvalidOperationException An internal server error occurred.
    Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
    We thought it's a throttling issue / found possible solution:
    http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
    Tried it, still same Error messages, problem not resolved.
    Any hints? Please advise.
    With best regards
    bostjanc

    Hi Bostjan,
    From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
    For throttling policy part
    1.Execute the command for Set-ThrottlingPolicy
    Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
    2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
    For registry key part
    1. Start Registry Editor (regedit).
    2. Navigate to the following registry subkey:
    \\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    3. Right-click ParametersSystem, point to New, and then click Key.
    A new key is created in the console tree.
    4. Rename the key MaxObjsPerMapiSession, and then press Enter.
    5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
    The new value is created in the result pane.
    6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
    7. Right-click the newly created key, and then click Modify.
    8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
    9. Restart the Microsoft Exchange Information Store service.
    If it still doesn’t help, please check ULS log for related error message.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Problems with OWA after installing Exchange 2010 SP3

    Hi,
    I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
    I did a reset for the OWA vritual directory, but nothing helps..
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
    ASP.auth_logon_aspx..ctor() +17
    __ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
    System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
    System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
    System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

    Hi Alelieveld,
    When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
    After you reset the VD, did you restart IIS?
    For more information, please see:
    Reset Client Access Virtual Directories
    http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
    Frank Wang
    TechNet Community Support

  • Exchange 2010 SP3 mailbox role installation error

    Hello.
    I can't install the Mailbox role on a Windows 2008 R2 server, the first Exchange in the domain and forest (2 dcs in the domain).
    Client Access Role and Hub Transport Role installed correctly.
    Setup preparations - without an error.
    Started the Exchange 2010 SP3 Installation, which start correctly, all prerequisites are seems to be ok. When arriving on the Mailbox Roles it make this error:
    02.05.2014 13:42:46.0634] [2] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0634] [2] [ERROR] An object class violation occurred.
    [02.05.2014 13:42:46.0634] [2] Ending processing enable-mailbox
    [02.05.2014 13:42:46.0649] [1] The following 1 error(s) occurred during task execution:
    [02.05.2014 13:42:46.0649] [1] 0.  ErrorRecord: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] 0.  ErrorRecord: Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to
    include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
     ---> System.DirectoryServices.Protocols.DirectoryOperationException: An object class violation occurred.
       at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
       at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
       at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, IAccountingObject budget, Nullable`1 clientSideSearchTimeout)
       at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Data.Directory.ADSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
       at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
       at Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
       at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession.Microsoft.Exchange.Data.IConfigDataProvider.Save(IConfigurable instance)
       at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalProcessRecord()
       at Microsoft.Exchange.Management.RecipientTasks.EnableMailbox.InternalProcessRecord()
       at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
    [02.05.2014 13:42:46.0649] [1] [ERROR] The following error was generated when "$error.Clear();
              if (!$RoleIsDatacenter)
                $arbUsers = @(get-user -Filter {lastname -eq "MSExchApproval 1f05a927-3be2-4fb9-aa03-b59fe3b56f4c"} -IgnoreDefaultScope -ResultSize 1);
                if ($arbUsers.Length -ne 0)
                  $mbxname = $arbUsers[0].name;
                  $mbxs = @( get-mailbox -arbitration -Filter {name -eq $mbxname} -IgnoreDefaultScope -resultSize 1 );
                  if ( $mbxs.length -eq 0)
                    $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                    if ($dbs.Length -ne 0)
                      enable-mailbox -Arbitration -identity $arbUsers[0] -database $dbs[0].Identity;
            " was run: "Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for
    its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] [ERROR] An object class violation occurred.
    [02.05.2014 13:42:46.0649] [1] [ERROR-REFERENCE] Id=SystemAttendantDependent___04bbd8c4a86b4d2c9403cdddf5b39579 Component=EXCHANGE14:\Current\Release\Transport\BCM\Moderated Transport
    [02.05.2014 13:42:46.0649] [1] Setup is stopping now because of one or more critical errors.
    [02.05.2014 13:42:46.0649] [1] Finished executing component tasks.
    [02.05.2014 13:42:46.0712] [1] Ending processing Install-MailboxRole
    Any help would be appreciate.
    Thanks,
    Igor K.

    Hi,
    The above error may occur when the federated built-in e-mail account that links to the computer account no longer exists or the federated built-in e-mail account in the Active Directory service is corrupted.
    I recommend you follow the steps below for troubleshooting:
    1. Remove the FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 e-mail account by using the ADSIEdit tool.
    a. Run adsiedit.msc.
    b. Locate the Default Naming Context node, and then locate to the CN=Users container.
    c. Locate and then right-click the CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 container. Then, click Delete.
    2.Rerun the Exchange Server 2010 Mailbox role setup application.
    3.Create a new federated e-mail account by using the following cmdlet:
    New-Mailbox -Arbitration -Name FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 -UserPrincipalName
    FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042@<Default_Accepted_Domain>
    Hope it helps.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

    We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
    message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380   
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793  
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753  
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738  
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302  
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source"
    This is happening on every mailbox we attempt to move. Any help would be appreciated

    Thanks for responding
    I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
    We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
    Here is the entire message from the log:
    11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
    6.0 (Build 7654.0).
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
    Regular Items: 20, 1.906 MB (1,998,818 bytes)
    Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
    FAI Items: 20, 0 B (0 bytes)
    FAI Deleted Items: 0, 0 B (0 bytes)
    11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
    11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380  
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793 
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753 
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738 
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302 
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source
    Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
    PropTags: [ContainerHierarchy; ContainerContents]
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

  • Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

    Dear forum,
    I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
    After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
    I let it alone for more than an hour but nothing happens.
    Launching it with /log returns this line at the end:
         "InstallFiles: File: Copying new files,  Directory: ,  Size: "
    Do you have already meet this issue or do you have any idea about the cause?
    Thanks for your help.

    Hi Amy,
    You'll find below the errors found in the rollup setup log:
    DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
    1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
    DEBUG: Error 2726:  Action not found: PreNgenEndDlg
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
    Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
    Just tell me if you need the whole log.
    Thanks

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

    Hi Techys,
    Kindly help me to resolve the below issue
    "Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
    Many Thanks,
    Madhu

    Hi,
    Follow this link for smooth installation for SP 2010 on Win 7.
    http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
    Murugesa Pandian.,MCTS|App.Development|Configure

  • Exchange 2010 SP3 installation Problem

    Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
    Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
    Below the complete error from Exchange Setup Logs
    [02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
    [02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
    [02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
    [02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
    [02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
    [02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
    [02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
    [02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
    [02/16/2014 05:03:04.0333] [0] End of Setup
    [02/16/2014 05:03:04.0333] [0] **********************************************

    Hi,
    As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
    Based on my research, there is no Microsoft article about the hotfix of  KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
    For more information, you can refer to the following article:
    http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
    Thus, to get more professional and faster help, I recommend you contact with our following support:
    https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • The Test-OrganizationRelationship function on Exchange 2010 SP3 Rollup4 error

    Hi
      If I run Test-OrganizationRelationship function on Exchange 2010 SP3 Rollup4 the fallowing error appear:
    [PS] C:\WINDOWS\system32>Test-OrganizationRelationship -Identity "emag" -UserIdentity [email protected] -verbose
    VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Active Directory session settings for
    'Test-OrganizationRelationship' are: View Entire Forest: 'False', Default Scope: 'hq.flanco.ro', Configuration Domain
    Controller: 'CALYPSO.hq.flanco.ro', Preferred Global Catalog: 'CALYPSO.hq.flanco.ro', Preferred Domain Controllers: '{
    CALYPSO.hq.flanco.ro }'
    VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Runspace context: Executing user: hq.flanco.ro/FLANCO -
    Users/HQ/IT/Marian NICA, Executing user organization: , Current organization: , RBAC-enabled: Enabled.
    VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Beginning processing &
    VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Instantiating handler with index 0 for cmdlet extension
    agent "Admin Audit Log Agent".
    VERBOSE: [12:24:44.391 GMT] Test-OrganizationRelationship : Current ScopeSet is: { Recipient Read Scope: {{, }},
    Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive
    Recipient Scope(s): {}, Exclusive Configuration Scope(s): {} }
    VERBOSE: [12:24:44.391 GMT] Test-OrganizationRelationship : Searching objects "[email protected]" of type "ADUser"
    under the root "$null".
    VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Previous operation run on global catalog server
    'CALYPSO.hq.flanco.ro'.
    VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Searching objects "emag" of type "OrganizationRelationship"
    under the root "$null".
    VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Previous operation run on domain controller
    'CALYPSO.hq.flanco.ro'.
    VERBOSE: Test that organization relationships are properly configured.
    VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Resolved current organization: .
    VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Calling the Microsoft Exchange Autodiscover service for the
    remote federation information.
    VERBOSE: [12:24:44.983 GMT] Test-OrganizationRelationship : The Autodiscover call succeeded for the following URL:
    https://autodiscover.emag.ro/autodiscover/autodiscover.svc.
    VERBOSE: [12:24:44.983 GMT] Test-OrganizationRelationship : The Autodiscover call succeeded for the following URL:
    https://autodiscover.emag.ro/autodiscover/autodiscover.svc.
    VERBOSE: [12:24:44.983 GMT] Test-OrganizationRelationship : Generating delegation token for user [email protected]
    for application FYDIBOHF25SPDLT.exchangedelegation.emag.ro.
    VERBOSE: [12:24:46.138 GMT] Test-OrganizationRelationship : The delegation token was successfully generated.
    VERBOSE: [12:24:46.138 GMT] Test-OrganizationRelationship : The Microsoft Exchange Autodiscover service is being called
    to determine the remote organization relationship settings.
    VERBOSE: [12:24:46.138 GMT] Test-OrganizationRelationship : The Client will call the Microsoft Exchange Autodiscover
    service using the following URL: https://autodiscover.emag.ro/autodiscover/autodiscover.svc/WSSecurity.
    VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : The Microsoft Exchange Autodiscover service failed to be
    called at 'https://autodiscover.emag.ro/autodiscover/autodiscover.svc/WSSecurity' because the following error occurred:
    SoapException.Code =
    http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd:InvalidSecurityToken
    Exception:
    System.Web.Services.Protocols.SoapHeaderException: An error occurred when processing the security tokens in the
    message.
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse
    response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Exchange.SoapWebClient.CustomSoapHttpClientProtocol.<>c__DisplayClass4.<Invoke>b__3()
       at
    Microsoft.Exchange.SoapWebClient.HttpAuthenticator.NoHttpAuthenticator.AuthenticateAndExecute[T](SoapHttpClientProtocol
    client, AuthenticateAndExecuteHandler`1 handler)
       at Microsoft.Exchange.SoapWebClient.SoapHttpClientAuthenticator.AuthenticateAndExecute[T](SoapHttpClientProtocol
    client, AuthenticateAndExecuteHandler`1 handler)
       at
    Microsoft.Exchange.SoapWebClient.AutoDiscover.DefaultBinding_Autodiscover.GetOrganizationRelationshipSettings(GetOrgani
    zationRelationshipSettingsRequest Request)
       at
    Microsoft.Exchange.Management.Sharing.TestOrganizationRelationship.<>c__DisplayClass8.<GetInvokeDelegate>b__7(DefaultBi
    nding_Autodiscover binding)
       at
    Microsoft.Exchange.SoapWebClient.AutodiscoverClient.<>c__DisplayClassf.<InvokeAndFollowSecureRedirects>b__c(IWebProxy
    webProxy)
       at Microsoft.Exchange.SoapWebClient.AutodiscoverClient.InvokeWithWebProxy(String url, InvokeWithWebProxyDelegate
    invokeWithWebProxy)
       at Microsoft.Exchange.SoapWebClient.AutodiscoverClient.InvokeAndFollowSecureRedirects(InvokeDelegate invokeDelegate,
    Uri url)
       at Microsoft.Exchange.SoapWebClient.AutodiscoverClient.InvokeForUrl(InvokeDelegate invokeDelegate, Uri url)
    VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : The Autodiscover call failed.
    RunspaceId  : b3b378f5-d912-4042-b578-e949b54da4c1
    Identity    :
    Id          : AutodiscoverServiceCallFailed
    Status      : Error
    Description : The Autodiscover call failed.
    IsValid     : True
    VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : Admin Audit Log: Entered Handler:OnComplete.
    VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : Ending processing &
        

    It's not this, is it -
    http://johanveldhuis.nl/en/error-occurred-processing-security-tokens-message/ ?

  • Exchange 2010 sp3 rollup 7 fails

    Exchange 2010 sp3 rollup 7 fails. This is ran at an elevated prompt and the UAC off. This server is also logged in as the domain Administrator account. 
    The server currently has rollup 4 SP3 installed. I'm wondering if I should uninstall it, reboot then try the Rollup 7 SP3 update?

    Hi,
    Can you please post the error?
    At the same time please check these.
    http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
    http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Maybe you are looking for