Exchange 2010 SP3, Windows 2008 R2, Windows Installer 5.0

Windows 2008 R2 uses Windows Installer 5.0
http://support.microsoft.com/kb/942288/en-us
Windows 2008 R2 is a supported OS for Exchange 2010 SP3
Why is Windows Installer 5.0 not shown as compatible with Exchange 2010 SP3?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Hi,
There is no official document about the reason Windows Installer 5.0 is not compatible with Exchange 2010 SP3 for our reference currently. We have to wait for update. Thanks for understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

  • What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

    Quick question. 
    What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
    Hasan

    Hi
    Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
    Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive. 
    Hasan

  • Exchange 2010 SP3 - Can DAG member be on OS 2012 R2 STD?

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc
    No. It wont let you do that. 
    http://technet.microsoft.com/en-us/library/dd638104(v=exchg.141).aspx
    DAGs are available in both Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition. In addition, a DAG can contain a mix of servers running Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition.
    Each member of the DAG must also be running the same operating system. Exchange 2010 is supported on both the Windows Server 2008 and Windows Server 2008 R2 operating systems. All members of a DAG must run either Windows Server 2008 or Windows Server 2008
    R2. They can't contain a combination of both Windows Server 2008 and Windows Server 2008 R2.
    In addition to meeting the prerequisites for installing Exchange 2010, there are operating system requirements that must be met. DAGs use Windows Failover Clustering technology, and as a result, they require the Enterprise version of Windows.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Exchange 2010 SP3 Prerequisites

    Trying to run Exchange 2010 SP3 and the prerequisite check indicates I need the following:
    Error:
    Install hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867.
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    As far as I can tell that Hotifx is no longer offered.  How do I get this hotfix so I can install Exchange 2010 SP3?

    Is it Windows 2008 R2 SP1 with .NET Framework 3.5 Service Pack 1? Install this...
    http://support.microsoft.com/kb/2637518/en-us
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Upgrade Windows 2008 R2 sp1 on an Exchange 2010 SP3 server

    I have looked high and low for an answer to this question:
    1. I have Windows 2008 R2 running Exchange 2010 SP3
    2. Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?
    3. Are there pre-requisites for doing this?
    4. If so, where can I get the documentation?
    I have spent hours looking through Google and Technet.  Lots of information about compatibility of 2008 R2 and Exchange SP1 and SP2.
    Your wisdom and experience would be appreciated.  Thank you!!
    Charlie

    Hi,
    "Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?"
    Yes, you can.
    "Are there pre-requisites for doing this?"
    There is no pre-requisites, however, as what Idan Vexler mentioned above, downtime is required.
    "If so, where can I get the documentation?"
    Here are two related threads for your reference.
    http://social.technet.microsoft.com/Forums/en-US/1093a91d-aed8-4c91-b538-ca82f5860523/upgrading-windows-2008-r2-enterprise-to-sp1-on-exchange-2010?forum=exchange2010
    http://social.technet.microsoft.com/Forums/exchange/en-US/0a7f29a2-04a5-485f-9b0c-061f89b311a5/installing-windows-2008r2-sp1-on-exchange-server-2010?forum=exchange2010
    Hope this helps.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Install Exchange 2010 Sp3 on Windows 2012 R2

    Dear All,
    From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
    that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
    http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
    Thank you

    The prerequisite check is checking that the required Windows components are installed.  Exchange 2010 is still not supported on Windows Server 2012 R2.

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Exchange 2010 SP3 mailbox role installation error

    Hello.
    I can't install the Mailbox role on a Windows 2008 R2 server, the first Exchange in the domain and forest (2 dcs in the domain).
    Client Access Role and Hub Transport Role installed correctly.
    Setup preparations - without an error.
    Started the Exchange 2010 SP3 Installation, which start correctly, all prerequisites are seems to be ok. When arriving on the Mailbox Roles it make this error:
    02.05.2014 13:42:46.0634] [2] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0634] [2] [ERROR] An object class violation occurred.
    [02.05.2014 13:42:46.0634] [2] Ending processing enable-mailbox
    [02.05.2014 13:42:46.0649] [1] The following 1 error(s) occurred during task execution:
    [02.05.2014 13:42:46.0649] [1] 0.  ErrorRecord: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] 0.  ErrorRecord: Microsoft.Exchange.Data.Directory.ADOperationException: Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to
    include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
     ---> System.DirectoryServices.Protocols.DirectoryOperationException: An object class violation occurred.
       at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
       at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
       at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, IAccountingObject budget, Nullable`1 clientSideSearchTimeout)
       at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Data.Directory.ADSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
       at Microsoft.Exchange.Data.Directory.ADSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
       at Microsoft.Exchange.Data.Directory.ADSession.Save(ADObject instanceToSave, IEnumerable`1 properties)
       at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientSession.Microsoft.Exchange.Data.IConfigDataProvider.Save(IConfigurable instance)
       at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalProcessRecord()
       at Microsoft.Exchange.Management.RecipientTasks.EnableMailbox.InternalProcessRecord()
       at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
    [02.05.2014 13:42:46.0649] [1] [ERROR] The following error was generated when "$error.Clear();
              if (!$RoleIsDatacenter)
                $arbUsers = @(get-user -Filter {lastname -eq "MSExchApproval 1f05a927-3be2-4fb9-aa03-b59fe3b56f4c"} -IgnoreDefaultScope -ResultSize 1);
                if ($arbUsers.Length -ne 0)
                  $mbxname = $arbUsers[0].name;
                  $mbxs = @( get-mailbox -arbitration -Filter {name -eq $mbxname} -IgnoreDefaultScope -resultSize 1 );
                  if ( $mbxs.length -eq 0)
                    $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                    if ($dbs.Length -ne 0)
                      enable-mailbox -Arbitration -identity $arbUsers[0] -database $dbs[0].Identity;
            " was run: "Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for
    its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] [ERROR] Active Directory operation failed on <dc fqdn>. This error is not retriable. Additional information: An attempt was made to modify an object to include an attribute that is not legal for its class.
    Active directory response: 0000207D: UpdErr: DSID-0315121C, problem 6002 (OBJ_CLASS_VIOLATION), data -1731808180
    [02.05.2014 13:42:46.0649] [1] [ERROR] An object class violation occurred.
    [02.05.2014 13:42:46.0649] [1] [ERROR-REFERENCE] Id=SystemAttendantDependent___04bbd8c4a86b4d2c9403cdddf5b39579 Component=EXCHANGE14:\Current\Release\Transport\BCM\Moderated Transport
    [02.05.2014 13:42:46.0649] [1] Setup is stopping now because of one or more critical errors.
    [02.05.2014 13:42:46.0649] [1] Finished executing component tasks.
    [02.05.2014 13:42:46.0712] [1] Ending processing Install-MailboxRole
    Any help would be appreciate.
    Thanks,
    Igor K.

    Hi,
    The above error may occur when the federated built-in e-mail account that links to the computer account no longer exists or the federated built-in e-mail account in the Active Directory service is corrupted.
    I recommend you follow the steps below for troubleshooting:
    1. Remove the FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 e-mail account by using the ADSIEdit tool.
    a. Run adsiedit.msc.
    b. Locate the Default Naming Context node, and then locate to the CN=Users container.
    c. Locate and then right-click the CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 container. Then, click Delete.
    2.Rerun the Exchange Server 2010 Mailbox role setup application.
    3.Create a new federated e-mail account by using the following cmdlet:
    New-Mailbox -Arbitration -Name FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 -UserPrincipalName
    FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042@<Default_Accepted_Domain>
    Hope it helps.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Is WMF3 or WMF4 supported in Exchange 2010 SP3 UR5 installed on Server 2008 R2 SP1?

    We'd like to upgrade WMF (aka powershell) on our Exchange 2010 servers but I haven't been able to find any updated information on support with the most recent servicepack/update rollup.
    Is installing WMF3 or WMF4 supported on Server 2008 R2 SP1 w/ Exchange 2010 SP3 UR5?

    WindowsPowerShell 3.0 is supported. Haven't seen 4.0 running for exchange 2010 on 2008 R2
    http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/30/weekend-scripter-wmf-powershell-and-exchange-server-compatibility.aspx
    http://blog.crayon.no/blogs/janegil/archive/2013/11/17/how_2D00_to_2D00_install_2D00_windows_2D00_powershell_2D00_4_2D00_0.aspx
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Gulab,
    Where did you read that WMF3 is supported on Exchange 2010 SP3 on Server 2008 R2?
    Neither of the links you pasted suggest that and in fact explicitly say "There has been no testing with ExchangeServer 2010 SP3 and WMF 3.0 installed on Windows Server 2008 R2."
    My Bad, that was TYPO...
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2010 SP3 installation Problem

    Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
    Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
    Below the complete error from Exchange Setup Logs
    [02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
    [02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
    [02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
    [02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
    [02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
    [02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
    [02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
    [02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
    [02/16/2014 05:03:04.0333] [0] End of Setup
    [02/16/2014 05:03:04.0333] [0] **********************************************

    Hi,
    As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
    Based on my research, there is no Microsoft article about the hotfix of  KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
    For more information, you can refer to the following article:
    http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
    Thus, to get more professional and faster help, I recommend you contact with our following support:
    https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange 2010 SP3 RU7 system requirements for server 2008

    Exchange 2010 SP3 system requirements list server 2008 SP2 as being a compatible OS.  KB2961522 only lists Windows 7 Professional 64-bit, Windows Server 2008 R2, Windows Server 2008 R2 SP1, Windows Server 2008 R2 Standard, Windows Server 2012. 
    Does it really support windows 7 but not server 2008 SP2??
    Thanks

    Hi,
    Yes, Windows Server 2008 SP2 is supported on Exchange Server 2010 SP3. Windows 7 SP1 is only supported for Exchange management tools, not for Exchange server.
    Hope my clarification can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2010 SP3 RU5 installation hangs on "Copying new files"

    Dear forum,
    I meet an issue installing the rollup 5 of Exchange 2010 SP3 on a HUB server with WS 2008 R2.
    After launching the install from an elevated command prompt,  and after the setup stops and disables some services, it starts "Copying new files" and then hangs. Nothing in the events logs, no popup message.
    I let it alone for more than an hour but nothing happens.
    Launching it with /log returns this line at the end:
         "InstallFiles: File: Copying new files,  Directory: ,  Size: "
    Do you have already meet this issue or do you have any idea about the cause?
    Thanks for your help.

    Hi Amy,
    You'll find below the errors found in the rollup setup log:
    DEBUG: Error 2826:  Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 5 pixels
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
    1: ExPatchCa: GetProperty: Failed to get property: CheckUrlResponseTimeout (CheckUrlResponseTimeout): NULL. (ec: 0xd)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
    from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Migration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Rtc.Collaboration of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.ExchangeServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot
    find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Management.LiveServicesHelper of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find
    the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.WebServices of assembly Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
    (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Exchange.Transport.Sync.MigrationRpc of assembly Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system
    cannot find the file specified. (Exception from HRESULT: 0x80070002)
    CAQuietExec:  Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, V
    DEBUG: Error 2726:  Action not found: PreNgenEndDlg
    The installer encountered an unexpected error while installing this package. This may indicate a problem with this package. The error code is 2726. The arguments are: PreNgenEndDlg, ,
    Action 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action start 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR.
    Action ended 16:21:13: CA_REQUIRED_ADMIN_OS_ERROR. Return value 0.
    CAQuietExec:  Error 0x80070001: Command line returned an error.
    CAQuietExec:  Error 0x80070001: CAQuietExec Failed
    CustomAction CA_CUSTOMER_PREPATCH_INSTALL returned actual error code 1603 but will be translated to success due to continue marking
    MSI (s) (F8:20) [16:53:32:036]: Internal MSI error. Installer terminated prematurely.
    Just tell me if you need the whole log.
    Thanks

  • SME 7.1 not working with Exchange 2010 SP3 UR8v2 and OnTap 8.2.3 7mode

    Followed IMT and installed software that NetApp said would work.Ontap 8.2.3 7-modevmWare 5.0 SP3Microsoft Windows Server 2008 R2 SP1Exchange 2010 SP3 UR8v2NetApp Host Tools 6.0.2SnapDrive 7.1.1SME 7.1 Everything connects fine.  SnapDrive sees my drives.  SME connects to Exchange Server.  However in the process of configuring SME, I get the following error.  I have followed knowledge base article and increased the timeout of DFM connection in registry, but that has not solved the problem.  Has anyone run into this before?  SME 6.1 works fine, but is not compatible with SnapDrive 7.1.1 (causes verifications to fail because server can't mount clone) and lower SnapDrive versions are not compatible with Ontap 8.2.3.  I am in a real bind here. Thanks in advance. 

    the following configuration for SME 7.1 is no longer supported: Windows Server 2008 R2Exchange 2010 SP3 RU1 – RU5WMF/PowerShell 3.0SME 7.1 The supported configuration will now be: Windows Server 2008 R2Exchange 2010 SP3 RU5WMF/PowerShell 4.0SME 7.1 this is because Microsoft does not support WMF 3.0 on Server 2008 R2 running Exchange 2010 SP3, with any RU version.SME 7.1 requires a minimum of PowerShell 3.0 (part of WMF 3.0) in order to run. Feel free to review the Exchange Server Supportability Matrix located here: https://technet.microsoft.com/en-us/library/ff728623%28v=exchg.150%29.aspx. All existing documentation (ISG, Admin Guide, IMT) will be updated shortly to reflect this change in requirements. hope that helps,Domenico.

  • Exchange 2010 SP3 Create Dynamic DL for Direct Reports

    I am not sure this is possible but if there is a will there is a way I guess.
    System: Exchange 2010 SP3 on Windows Server 2008 R2
    I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
    Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
    I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
    Thanks. 

    hi,
    as from above  i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
    Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
    New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

    Hi there,
    I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
    Our current Exchange environment consists of the following:
    1 x CAS/HT Server
    2 x Mailbox Server (members of a DAG)
    The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
    The Execution Policies on our Exchange servers are set as follows:
    – CAS/HT Server:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine Unrestricted
    – Mailbox Servers:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine RemoteSigned
    Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
    I would be very grateful if you (or any of the kind readers) could help me with following questions:
    1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
    2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
      i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
      ii. Install SP3 followed by RU 5 on the first mailbox server
      iii. Install SP3 followed by RU 5 on the second mailbox server
    Many thanks,
    M

    Hi Amit,
    Many thanks for the swift reply.
    That's correct.  We didn't set the Powershell execution policy via Group Policy.  We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
    The mailbox servers' execution policies have not been changed and are set to those values by default.
    I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
    But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

Maybe you are looking for

  • Oracle EPM 11.1.2.3: Only R&A Administrator Can Open IR Documents

    Windows 2008 R2, SQL Server 2008 R2 I am trying to use a test user to test for problems in a new maintenance release from 11.1.2.1 to 11.1.2.3. My test user was not provisioned individually, just using WORLD for roles. WORLD is in these roles: Analys

  • Error while creating the Personal action

    Dear Friends,                         while creating reasons for Personnel Actions under spro am getting this error.Kindly help me to solve this error Upd.0000 = 'X' is only allowed for Upd.0302 = 'X' Message no. 54360 Diagnosis The combination you h

  • How to Set COMMIT intervals in ODI

    Hi Guru's, Iam getting around 3 Million records from the source, In my IKM I have an option for selecting commit interval for 1000 rows. This may reduce my performance. Could you please provide any thoughts, how to increase the COMMIT interval to 100

  • How do I fix the web and wiki server - error reading settings?

    Hello,       I upgraded to OS X Mountain Lion and installed the OS X Server.  The Wiki pane has the error message "Error Reading Settings".  The Websites pane looks fine, but when I click on "View Server Website", I get the webpage that simply says "

  • How do you insert special characters with imovie 08?

    How do you insert special characters into a project with imovie 08?