EXCHANGE 2013 - ECP AND OWA INTERNAL ERROR 500 - NEW INSTALL

Really hoping someone can help me here.
I first installed 2012 OS and 2013 exchange and users were getting 'Unable to open your default folder' when trying to open outlook. After much googling and nothing working I decided to put 2008 R2 on the server with 2013 Exchange. Now i am running into massive
issues.
Firstly i get Internal Errror 500 after putting in credentials for ECP and OWA. I did notice that it is also defaulting straight to this URL after entering password https://localhost/owa/auth.owa
I check the management shell and that connects without any issues. I also logged on to a computer to see what it did. After autodiscover it is not able to log onto server and then it looks like it is look for the old server information from previous server.
Any help would be appreciated. Can i do another reinstall of OS and how am i meant to remove the previous data that it seems the server has found?

Hi,
According to your description, I understand that cannot login internal ECP\OWA with error 500, also autodiscover failed.
If I misunderstand your concern, please do not hesitate to let me know.
I notice that autodiscover “looks like it is look for the old server information from previous server”, have you installed multiple version Exchange in your environment?
Please run below command to double check the virtual directory configuration:
Get-OutlookAnywhere | FL Identity,*Host*,*Auth*
Get-OwaVirtualDirectory | FL Identity,*url*,*auth*
Get-EcpVirtualDirectory | FL Identity,*url*,*auth*
Get-WebServicesVirtualDirectory | FL Identity,*url*,*auth*
Get-ClientAccessServer | FL Identity,*URI*,*auth*
Then, open IIS and check on the Application Pools to view whether MSExchangeOWAAppPool and MSExchangeECPAppPool is running on .NET Framework v4.0, and recycle virtual directory for test.
Additional, here’s a thread about “Removing Old Exchange and installing a new one”, for your reference:
https://social.technet.microsoft.com/forums/exchange/en-US/46ca107c-7ece-4da7-8aea-46b705793f37/removing-old-exchange-and-installing-a-new-one
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Similar Messages

Exchange 2013 ECP and DAG issue

Good Day,
We have Exchange 2013 setup in Coexistence with Exchange 2007. Everything is working well except for two small issues I have noticed.
Current Setup of 2013:
SiteA:
2x CAS Servers on Windows 2012 R2 configured with windows NLB (Internet Facing).
2x MBX servers Configured in a DAG also running on Windows 2012 R2.
SiteB:
2x CAS Server on Windows 2012 R2.
2x MBX servers Configured in a DAG also running on Windows 2012 R2.
Issues I am having:
Issue 1:
When working on the ECP:
I can do all tasks on servers in the same site but get some errors when trying to do tasks on servers in the other site.
When trying to Activate a DB copy on the DAG at SiteB I get "The Microsoft Exchange Replication service does not appear to be running on Server name"
And just trying to go to the properties of a server at SiteB "An error occurred while accessing the registry on the server servername"
This happens vice versa.
I can access all servers on the same site but not between sites with some tasks.
I have made sure firewall is disabled and remote registry is indeed running but no luck.
From a network perspective all ports are open between the sites.
Issue 2:
When I reboot a DAG member with the active mailbox databases for testing outlook connectivity I get two issues.
Then I cannot access ECP at all until the server is up again.
Outlook keeps staying on trying to connect until it is reopened.
Any Ideas?
I will gladly give more information if needed.
Thank You
Riaan Rourke
Senior System Engineer

Since I don't see this with Hyper-V I'll assume this is on ESX. Please let me know it that's not correct.
In terms of virtualization best practices - whose list was that :)
There are multiple configuration things that you *MUST* do when using WLBS on ESX. It will depend upon multiple things in the environment. I'd start with this
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1556
Fix that, and chances are the other item will be also remediated.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Seemingly successful install of Exchange 2013 SP1 turns into many errors in event logs after upgrade to CU7

I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+ New-PerfCounters -DefinitionFileName $f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
 + FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
 12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
 at System.Diagnostics.PerformanceCounter.InitializeImpl()
 at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
 at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
 at System.Diagnostics.Process.GetProcessById(Int32 processId)
 at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
 at System.Diagnostics.PerformanceCounter.InitializeImpl()
 at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
 at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
 at System.Diagnostics.Process.GetProcessById(Int32 processId)
 at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
 at System.Diagnostics.PerformanceCounter.InitializeImpl()
 at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
 at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
 at System.Diagnostics.Process.GetProcessById(Int32 processId)
 at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.

Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3rd time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible.

Exchange 2013, multiple IIS OWA sites with different authentication

Hi
I have an exchange 2013 server with Client Access and Mailbox server installed. The server has an second ip address which I have bound an additional IIS site to. The additional IIS site is named ExchangeExternalFBA.
The default web site is configured for basic and windows authentication with:
Set-EcpVirtualDirectory -identity "ecp (default web site)" -FormsAuthentication:$false
Set-owavirtualdirectory -identity "owa (Default Web Site)" -FormsAuthentication:$false -WindowsAuthentication:$true -BasicAuthentication:$true
Then a new ECP and OWA are configured with:
New-ecpVirtualDirectory -WebSiteName "ExchangeExternalFBA"
New-OwaVirtualDirectory -WebSiteName "ExchangeExternalFBA"
Set-owavirtualdirectory -identity "owa (ExchangeExternalFBA)" -LogonFormat FullDomain -FormsAuthentication:$true -WindowsAuthentication:$false -BasicAuthentication:$true
Set-EcpVirtualDirectory -identity "ecp (ExchangeExternalFBA)" -FormsAuthentication:$true
Then I perform an iisreset.
My problem is that then when I try to access the ECP or OWA on the default website, it loads forms authentication! The ECP or OWA on the ExchangeExternalFBA web site works correctly and also loads forms authentication.
If I run...
get-owavirtualdirectory "owa (ExchangeExternalFBA)"
then it returns:
InternalAuthenticationMethods : {Basic, Ntlm,
WindowsIntegrated}
BasicAuthentication : True
WindowsAuthentication : True
DigestAuthentication : False
FormsAuthentication : False
LiveIdAuthentication : False
AdfsAuthentication : False
OAuthAuthentication : False
If I then run
Set-EcpVirtualDirectory -identity "ecp (default web site)" -FormsAuthentication:$false
Set-owavirtualdirectory -identity "owa (Default Web Site)" -FormsAuthentication:$false -WindowsAuthentication:$true -BasicAuthentication:$true
and perform another iisreset then when I try to access the ECP or OWA on the default website it loads correctly. But then the forms based authentication on the ExchangeExternalFBA website can no longer log in, it does not accept the user name and password.
If I then disable and enable FBA on the ExchangeExternalFBA website then it works but forms based authentication takes over the default web site again!
Whether I perform the above from the gui or from powershell it does not make a difference, the same behaviour is observed. Changing the logontype on the FBA does not make a difference.
This has been tested on exchange 2013 cu1 and cu2.
Similar(if not identical until they get sidetracked) issue reported in http://social.technet.microsoft.com/Forums/exchange/en-US/9fcd360f-6658-4940-add7-2f13265cf86b/multiple-owa-sites-on-a-single-server-2012-with-exchange-2013-mailbox-cas.
This worked fine in outlook 2007 and 2010, why now do my virtual directories break each other?
I can reproduce the issue on a test exchange 2013 I built in dev.
Is this a bug or are you no longer meant to host different forms of authentication on a single cas?
I'm mostly interested to see if this works for other people and why it no longer seems to work in 2013, so please no questions; 'why do you want 2 different forms of authentication'.
Much appreciated, Thanks!

Based off of your feedback I have run the following:
Remove-OwaVirtualDirectory "owa (ExchangeExternalFBA)"
Remove-EcpVirtualDirectory "ecp (ExchangeExternalFBA)"
iisreset
Set-EcpVirtualDirectory -identity "ecp (default web site)" -FormsAuthentication:$false
Set-owavirtualdirectory -identity "owa (Default Web Site)" -FormsAuthentication:$false -WindowsAuthentication:$true -BasicAuthentication:$true
New-ecpVirtualDirectory -WebSiteName "ExchangeExternalFBA" -Role ClientAccess
New-OwaVirtualDirectory -WebSiteName "ExchangeExternalFBA" -Role ClientAccess
Set-owavirtualdirectory -identity "owa (ExchangeExternalFBA)" -LogonFormat FullDomain -FormsAuthentication:$true -WindowsAuthentication:$false -BasicAuthentication:$true
Set-EcpVirtualDirectory -identity "ecp (ExchangeExternalFBA)" -FormsAuthentication:$true
iisreset
After this there has been no change in behaviour. After the iisreset, forms have again hijacked the default web site and re-setting the authentication on the default web site removes the forms but breaks the ability to sign in to the forms based page on the
ExchangeExternalFBA web site again.
Note. '-Role Frontend' did not work. It showed the error:
Cannot process argument transformation on parameter 'Role'. Cannot convertvalue "frontend" to type
"Microsoft.Exchange.Management.SystemConfigurationTasks.VirtualDirectoryRole".
Error: "Unable to match the identifier name frontend to a valid enumerator name. Specify one of the following enumerator names and try again:
ClientAccess, Mailbox"
+ CategoryInfo : InvalidData: (:) [New-OwaVirtualDirectory], ParameterBindin...mationException
+ FullyQualifiedErrorId : ParameterArgumentTransformationError,New-OwaVirtualDirectory
Running get-help New-OwaVirtualDirectory -detailed shows the correct usage would be '-Role ClientAccess'?
-Role <ClientAccess | Mailbox>
The Role parameter specifies the configuration that should be used
when the virtual directory is created. The following are the values
that can be used with this parameter:
* FrontEnd Configures the virtual directory for use on a Client Access
server.
* BackEnd Configures the virtual directory for use on a Mailbox server.

Exchange 2013 ECP/OWA Error 503 Service Unavailable

Hi,
Hoping that someone can clarify or assist with an issue relating to Exchange 2013 CU3..
Both roles installed on a single 2012 server, mailboxes created, able to login to ECP/OWA using ht tps://servername.int.domain.com/ecp using the out of the box internally generated SSL certificate.
Virtual directory internal and external settings for all directories were configured to be ht tps://mail.domain.com/owa /ecp /EWS etc and a UCC certificate (containing mail.domain.com, autodiscover.domain.com)from GoDaddy was imported and assigned to
IIS and SMTP, internal DNS records were setup internally and externally for mail.domain.com and full propagated, Outlook Anywhere enabled and configured to mail.domain.com, external access configured for all virtual directories
The issue is that ECP and OWA can only be accessed internally by the full internal server FQDN URL ht tps:// serverame.int.domain.com/ecp whereas it should be accessible at this point by ht tps:// mail.domain.com/ecp
Error received both internal and external when trying ht tps://mail.domain.com / owa / rpc etc is error 503 Service Unavailable
I know that the ECP and OWA sites are up and running as I can login and do anything by internal servername URL but no joy at all using the external (which is to be used for internal clients aswell for seamless access)
The only way it works is by adding a host name to the 2 x 443 bindings in IIS for the front end website and set it to mail.domain.com but this means autodiscover.domain.com internally and externally wont work
Is this normal and required for Exchange 2013 or is there a way to resolve this?
Thanks in advance!

Hi,
I found a article might help you, for you reference:
http://support.microsoft.com/kb/2619402
Generally, this error occurs if the application pool that is associated with the web application doesn't start.
To troubleshoot this issue, follow these steps:
In Event Viewer, view the System log to find errors from the Microsoft-Windows-WAS source. An event is frequently logged in the System log if the application pool fails to start.
If you don't find any relevant events in the System log, search for relevant entries in the HTTPERR log file. The httperr1.log file is located in the following system folder:
c:\windows\system32\logfiles
In the file, search on "503" to locate any relevant information about why the application pool failed. For example, you may see an entry that resembles the following:
2011-12-08 18:26:42 ::1%0 6721 ::1%0 443 HTTP/1.1 GET /owa 503 3 N/A SharePoint+Web+Services+Root
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2013 ECP Login fails HTTP 404 Requested URL: /owa/auth/logon.aspx

Hi,
One of our Exchange servers stopped allowing access to OWA and ECP. I have now managed to get OWA working but ECP is still failing. When connecting to ECP using https://servername/ecp/ it asks me for my username and password. After hitting enter it shows
me an error page:
Server Error in '/owa' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /owa/auth/logon.aspx
URL in the address bar while on this screen: https://exchangeserver:444/owa/auth/logon.aspx?url=https://exchangeservera:444/ecp/&reason=0
Question: When the URL points to servername:444/owa/auth/logon.aspx - Is it trying to find the logon.aspx in C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\Owa\auth? There is no such file in that directory?
I have removed and recreated the ECP and OWA virtual directories several times.
I am trying to login using a domain administrator account.
Thanks,

Hi,
Is there any Exchange server 2010 coexistence with your Exchange 2013 server? If it is, please try the URL
https://CAS15-NA/ecp?ExchClientVer=15 to access ECP.
Also run the following to check your OWA and ECP virtual directories:
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | FL Identity,*Authentication*
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | FL Identity,*Authentication*
And make sure the Basic and Forms authentications are enabled in
Default Web Site and Ntlm, WindowsIntegrated
authentication methods are enabled in
Exchange Back End. Then restart IIS service by running
iisreset /noforce from a command prompt window.
If the issue persists, please collect any event logs or IIS logs for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Internal error 500.0 when trying access my email via owa

Hello,
i am get following error when try to access email through OWA
Http Error 500.0-internal error
module "Exppw" could not be found.
this mesaage appear after unistall IIS and reinstall becuse i have problem initialization failed after
fix initilization failed OWA not working.
thanks

Hi activenew
Thank you for your question.
“440 login timeout” was caused by some reasons, for example permission, authentication and so on.
You can refer to the following link to rebuild virtual directory:
http://technet.microsoft.com/en-us/library/dd789741(v=exchg.80).aspx
http://support2.microsoft.com/default.aspx?scid=kb;EN-US;941201
If there are any questions, please let me know.
Best Regard,
Jim

Exchange 2013 autodiscover finds external & internal SSL certificate causing autodiscover to fail

Hi:I'm currently working on a windows 2012 server, with exchange 2013, lets say our internal domain is "cars.com" and ALSO the case for our external domain. We have purchased an SSL wildcard positive certificate
*.cars.com so that we could configure Outlook Anywhere, we have created the needed DNS records at godaddy and our internal server, OWA, ECP it all works if you go to  <a href="https://bird.cars.com/owa">https://bird.cars.com/owa</a>
because we have a DNS record for bird in godaddy and out local server, so all of that is working like a pro ! here comes the tricky part, our website is registered in godaddy but hosted by someone else a company called poetic systems; when we test the connection
with the remote connectivity analyzer website we get a very peculiar error that says SSL certificate not valid, now it provides the name of the certificate it found and is not ours, we found that the hosting company is listening in port 443, therefore, it
is pulling their self signed certificate also, does anyone have a fix for this, I have done this same setup before for other companies and this is the first time a situation like this happens. I REALLY NEED HELP !!!!!

Hi,
According to your description, there is a certificate error when you test Outlook Anywhere connection by ExRCA.
If I misunderstand your meaning, please feel free to let me know.
And to understand more about the issue, I’d like to confirm the following information:
What’s detail error page?
Check the Outlook Anywhere configuration: get-outlookanywhere |fl
Check the certificate : get-exchangecertificate |fl
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2013 SP1 and CUCM 9.1.2 - Exch not recognizing called extension

I think I'm almost there in getting Exchange 2013 SP1 UM working with CUCM 9.1.2...I've got two issues at the moment that I need a little help with.
1) When I dial my VM pilot (6040) from a UM enabled extension it prompts to enter an extension. When I dial the same extension and let it ring to VM, Exchange picks up and says "the person you are trying to reach does not have a valid voice mail box
on our system".
2) This just started happening this afternoon, when I dial my VM pilot (6040) exch3 picks up as thats what I have my route pattern pointing to. If I enter the extension of a mailbox on exch2, I get stuck in a endless loop.
I've followed this post as a guide but it hasn't resolved my issue.
https://supportforums.cisco.com/discussion/11914031/exchange-2013-um-and-cucm-86
My Exchange environment looks like this:
Site 1:
exch1 - CAS/Mailbox, used for mainly utility type work, journal, dedicated SMTP flows etc
exch2 - CAS/Mailbox, part DAG13
exch3 - CAS/Mailbox, part of DAG13
Site 2:
exch2dr - CAS/Mailbox, part of DAG13
exch3dr - CAS/Mailbox, part of DAG13
DAG13 is stretched between two sites, there are no users at our DR site so CUCM is pointing to Site 1 for UM. Each site has an internet facing CAS-only server for OWA/EAS etc.
Any help is greatly appreciated. I'd love to get rid of Unity.
EDIT:
I just found this event in the event logs:
The Microsoft Exchange Unified Messaging service on the Mailbox server received a diverted call with ID "d51600-3a3140c5-9b8-c1414ac@EXCH3-IPADDR" for extension "4099" on UM dial plan "CUCM" from UM IP gateway "CUCM IP",
but no UM-enabled mailbox for the corresponding extension could be found. Please check the extension and make sure that the corresponding mailbox is enabled for UM and associated with the correct UM dial plan.

9.1.2 I think it is, we upgraded to avoid the known DNS bug
I cant see how to PM you either
The crux of it was outlined below with some tweaks
http://blogs.technet.com/b/canitpro/archive/2014/04/30/step-by-step-integration-between-exchange-2013-um-and-cisco-unified-communication-manager.aspx
As we have multiple combined role servers, our trunks are set up as follows:
1. 1 x CAS Trunk - contains all CAS Servers on port 5060
2. 4 x MBX Trunks - contains Maibox Server with ports 5062-5068
On top of that, we had to Allow "Redirecting Diversion Header Delivery - Inbound (and Outbound)" on the CAS Trunk but DISABLE it on the Mailbox Trunks
Also, make sure that you are using Telephone Extension Dial plans in Exchange 2013 (Despite them being unable to be associated with a 13 Server - EX13 answers for all calls anyway)
Lastly, the MS documentation is a little strange - it says that as your last step of UM migration, you should point your Call Manager to 2013 - I don't agree with that statement, EX13 routes calls back to 2010 UM Servers perfectly fine, so treat it the same
as any other CAS based service - point to 2013, and it will handle the rest

" Internal error: 500" during line item configuration

We are using IPC with some interface customization and copying by reference.
During line item configuration I've been getting an Internal error: 500
"Internal error: 500 - The item com.sap.spc.remote.client.object.IPCItemReference@3e902a could not be found on the IPC server!"
The internal error has been occuring when adding and configuring mulitple line items.
Process:
--login to IPC server with new quotation
--shopping cart: add and configure first line item (this returns to shopping cart)
shopping cart: add and configure second line item < the internal error 500 occurs after "configure" is clicked
Please help.
Thank you.
-Philipe
The detailed error message is pasted below:
com.sap.spc.remote.client.object.IPCException: The item com.sap.spc.remote.client.object.IPCItemReference@6bbf02 could not be found on the IPC server!
 at com.sap.spc.remote.client.object.IPCException.fillInStackTrace(IPCException.java:120)
 at java.lang.Throwable.<init>(Throwable.java:85)
 at java.lang.Exception.<init>(Exception.java:33)
 at java.lang.RuntimeException.<init>(RuntimeException.java:38)
 at com.sap.spc.remote.client.object.IPCException.<init>(IPCException.java:27)
 at com.sapmarkets.isa.ipc.ui.jsp.action.StartConfigurationAction.doPerform(StartConfigurationAction.java:245)
 at com.sapmarkets.isa.core.BaseAction.perform(BaseAction.java:197)
 at org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
 at com.sapmarkets.isa.core.ActionServlet.process(ActionServlet.java:430)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:310)
 at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)
 at com.sapmarkets.isa.core.ActionServlet.processActionForward(ActionServlet.java:267)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)
 at com.sapmarkets.isa.core.ActionServlet.process(ActionServlet.java:430)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:310)
 at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)
 at com.sapmarkets.isa.core.ActionServlet.processActionForward(ActionServlet.java:267)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)
 at com.sapmarkets.isa.core.ActionServlet.process(ActionServlet.java:430)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.inqmy.services.servlets_jsp.server.FilterChainImpl.runServlet(FilterChainImpl.java:137)
 at com.inqmy.services.servlets_jsp.server.FilterChainImpl.doFilter(FilterChainImpl.java:70)
 at com.tealeaf.capture.LiteFilter.doFilter(LiteFilter.java:98)
 at com.sapmarkets.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:57)
 at com.inqmy.services.servlets_jsp.server.FilterChainImpl.doFilter(FilterChainImpl.java:65)
 at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:135)
 at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
 at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:672)
 at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:314)
 at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
 at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1288)
 at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
 at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
 at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)

Dear Raghu,
Thank u for your reply. Accepted that this being a leap year system is picking up 366 days. But February month is already considered in last fiscal year. So my fiscal year is April 2008 - March 2009 which has only 365 days.
So want interest to be calculated on only 365 days.
Kindly let me know the solution.
Thanks & regards,
Ajay

Instant Messaging Internal Error 500

Hi,
I have an unlocked AT&T Treo 680 that I am using on t-mobile. I have the AT&T 2.11 software already installed on the device but I have not been able to connect to instant messaging and receive the internal error 500 code.
Any help would be greatly appreciated!
Post relates to: Treo 680 (AT&T)

Have you figured out what to do to take care of this problem? I'm having the exact same issue. I was able to use the IM software that was on the 680 initially. Then all of a sudden, it didn't work anymore.
Post relates to: Treo 680 (Unlocked GSM)

Internal error: 500 Operation failed.

Hi, I keep getting this error when I go to re-publish my site: Internal error: 500 Operation failed.
Any idea what this means or how I can fix it?
I should add that it seems to be stalling on my Contact page which has a fillable form built-in. This form has been in my site awhile though and I've never had in problems publishing before.
Thanks,
Neil

Generally it should be no problem if someone is filling in a form at the same time as essentially the page and form is downloaded to the users local cache and only interacts with the server when the submit button is pressed.
Are you hosting on Business Catalyst? They were doing some maintanance over the last few days.
Glad it's working for you now though. Good luck!

Server Internal Error 500

Hi!! I have problems, when I execute http://localhost:7501/tools, and the login is administrator.My Error is:Server Internal Error 500 Thanks.

Hi!!
I include my weblogic.log
Thanks for you help !!!
"Michael Girdley" <----> escribió en el mensaje
news:3a96e5cc$[email protected]..
>
>
You should check the server log and console to see what's happening.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Erika Astorga" <[email protected]> wrote in message
news:3a944274$[email protected]..
Hi!! I have problems, when I execute http://localhost:7501/tools, and
the
login is administrator.My Error is:Server Internal Error 500 Thanks.
[error.txt]

Cross-forest migration to Exchange 2013 SP1 and Outlook 2013 SP1

Hello! I have two forest: Exchange 2010 SP2 RU5 - resource forest and Exchange 2013 SP1 - account forest. I make cross-forest migration from resource forest (linked mailboxes with account forest) to forest with Exchange 2013 SP1.
I have moved mailbox from resource forest exchange 2010 to exchange 2013 sp1 forest.
Outlook 2010 connect to migrated mailbox without any problem, but outlook 2013 sp1 cannot connect to migrated mailbox.
Error look like - cannot find exchange server.
I created new mailbox in Exchange 2013 organization and can connect to it with outlook 2010 and outlook 2013 sp1.
Someone have the same problem with migrated mailbox? How to solve it?
Truly, Valery Tyurin

You can use New-MoveRequest to perform a cross-forest move. Here is a well post and step-wise explanation you can check for cross forest migration from exchange 2010 to exchange 2013(http://msexchangeguru.com/2013/11/03/e2013crossforestmigration/).
Moreover, you can try this utility (
http://www.exchangemigrationtool.com/ ) to accomplish this task.

Exchange 2013 migration and Lync server

hi guys,
i wanna upgrade my exchange 2010 to 2013 in our company.
but i faced with a question
will exchange migration has effect on Lync server an should i reinstall it again in our caompany or not?
plz help me
thanks guys

Hi,
you will need to config IM in OWA for Exchange 2013 server.As i can remember voice and everything else should be fine.
Here is a guide for enabling IM in OWA:
http://www.expta.com/2010/09/how-to-integrate-lync-server-2010-with.html
Just remember to point DNS to the New Exchange 2013 server and it should be fine.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

EXCHANGE 2013 - ECP AND OWA INTERNAL ERROR 500 - NEW INSTALL

Similar Messages

Maybe you are looking for