Exchange 2013 SP1 on Windows Server 2008 R2 Enterprise - BSOD after DAG creation

Hi,
We are running Exchange 2007 SP3 RU13 on Windows 2003 R2 with SP2 in a 2003 native AD environment and recently decided to upgrade to Exchange 2013. We installed a pair of new DELL R420 servers running Windows 2008 R2 Enterprise then threw Exchange 2013 SP1
onto them. This all went fine and the servers are running stable.
We connected the second NIC of each server to the other via a separate switch, the second NIC has Client for MS Networks and File/Printer Sharing disabled plus a totally separate subnet with no DNS or GW address assigned. DAG setup was run and completed
OK. I created the DAG network in Exchange and enabled replication, I also left replication enabled across the production LAN. Finally, I went into the advanced network settings and made sure the replication network was below the production network in the binding
order.
After an hour or two the BSOD's started.. both servers would crash within a few minutes of each other and reboot with a Kernel Panic. I have attached the contents of the dump file below. This seems to happen every few hours and it always seems to be the
server hosting the passive DB copies crashes first, followed by the server hosting the active copies. Note that if we disable the replication NIC on both servers they do not crash.
I got the impression from somewhere that perhaps the servers had mixed up the binding order and were trying to use the replication network as primary, losing access to AD and rebooting (which I have read is the behaviour for Exchange now). It appears the
Exchange Health service has killed WININIT which causes the crash.
Thanks!!!
The crash dump text is below:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa80192ebb30, Terminating object
Arg3: fffffa80192ebe10, Process image file name
Arg4: fffff80001dc37b0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa80192ebb30
DEBUG_FLR_IMAGE_TIMESTAMP:  0
MODULE_NAME: wininit
FAULTING_MODULE: 0000000000000000
PROCESS_NAME:  MSExchangeHMWo
BUGCHECK_STR:  0xF4_MSExchangeHMWo
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  DRIVER_FAULT_SERVER_MINIDUMP
CURRENT_IRQL:  0
LAST_CONTROL_TRANSFER:  from fffff80001e4cab2 to fffff80001abebc0
STACK_TEXT:  
fffff880`0d7f39c8 fffff800`01e4cab2 : 00000000`000000f4 00000000`00000003 fffffa80`192ebb30 fffffa80`192ebe10 : nt!KeBugCheckEx
fffff880`0d7f39d0 fffff800`01df7abb : ffffffff`ffffffff fffffa80`1bcf3060 fffffa80`192ebb30 fffffa80`383ea060 : nt!PspCatchCriticalBreak+0x92
fffff880`0d7f3a10 fffff800`01d77674 : ffffffff`ffffffff 00000000`00000001 fffffa80`192ebb30 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17486
fffff880`0d7f3a60 fffff800`01abde53 : fffffa80`192ebb30 fffff880`ffffffff fffffa80`1bcf3060 00000000`00000000 : nt!NtTerminateProcess+0xf4
fffff880`0d7f3ae0 00000000`7772157a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`34eed638 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7772157a
STACK_COMMAND:  kb
FOLLOWUP_NAME:  MachineOwner
IMAGE_NAME:  wininit.exe
FAILURE_BUCKET_ID:  X64_0xF4_MSExchangeHMWo_IMAGE_wininit.exe
BUCKET_ID:  X64_0xF4_MSExchangeHMWo_IMAGE_wininit.exe
Followup: MachineOwner

Hi Darrkon,
I suggest checking the status of the HealthMailbox on each of servers.
Also try to re-create the mailbox. You can safely delete and recreate health mailboxes.
Be aware that any local Managed Availability probes that are using the these mailboxes will fail until the Microsoft Exchange Health Manager is restarted.  Once that service is restarted, it will recreate any mailboxes that it needs. 
More details in the following similar thread, just for your reference:
BSOD after creating DAG
http://social.technet.microsoft.com/Forums/exchange/en-US/44d1cd98-cba1-4ed0-b0e7-8aa76ee3eabc/bsod-after-creating-dag
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

  • Trying to Install Exchange 2013 SP1 on Windows Server 2012 R2 but getting an error on mailbox role install

    On Step 1 of 7, the "Mailbox role: Client Access service," I got an error during installing:
    Error:
    The following error was generated when "$error.Clear(); 
              Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
              if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
                Install-AuthCertificate -DomainController $RoleDomainController
            " was run: "Could not grant Network Service access to the certificate with thumbprint 8FCF29D8F3A4D8E3D649BF4231DC9B4641D5A077 because a cryptographic exception was thrown.".
    I couldn't find help anywhere on this. Can someone help me? If you need any more info, please let me know ^_^

    Try the solution provided in this thread:
    https://social.technet.microsoft.com/Forums/exchange/en-US/e4b23442-e3c9-4611-9fde-fac848ca217b/error-could-not-grant-network-service-access-to-the-certificate-with-thumbprint?forum=exchangesvrdeploy
    Thanks,
    MikeV
    MCSE 2012
    If the above solutions doesn't work, try moving the certificate with the thumbprint identified in the error, to the Trusted Root Certification Authority folder
    Thanks,
    MikeV
    MCSE 2012

  • Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

    Hi
    Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
    Hub Transport Role
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if ($exsSid -eq $null -or $exsSid -eq "")
              $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
              start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
            " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
    Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:25:35
    Sandeep Gupta

    Hi,
    It might be a permission issue.
    1 :
    Add Manage auditing and security log Properties
    Administative Tools > Local Security Policy > Local Policies > User Rights
    Assignment > Manage auditing and security
    Add
    Exchance Servers.
    2. Check Exchange Trusted Subsystem
    1)Open Active Directory Users and Computers
    2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
    the right hand side select the Administrator group,goto the properties
    3)Click members tab and add Exchange Trusted Subsystem
    4)Click ok twice
    5)Reboot the Exchange server
    6)Rerun the Exchange setup
    Best Regards!

  • Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

    Hi all,
    During the installation of the LMS-4.2,
    It passed the "Initializing" and "Copying" stages,
    but, in the "Configuring", it never finishes,
    Anyone had have a similar problem?
    the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

    Thanks for the update. Glad to know it has installed now.
    There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
    Also, LMS is not supported in other languages installers or setups except English and Japanese.
    There are a couple more things you can do/check prior to running the installation.
    LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
    To check naming convention you can run the following command from Windows Command prompt: 
                                       cmd>fsutil.exe 8dot3name query <Drive>
    Example:
    C:\Users\winlau>fsutil 8dot3name query C:
    The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
    The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
    Based on the above two settings, 8dot3 name creation is enabled on C:.
    8dot3 needs to be enabled for all drives LMS will potentially use, including:
    Drive where TEMP/TMP is located
    The drive LMS is installed to
    The drive LMS backs up to
    Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
    In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
    Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
    Sample command to enable globally:
      "fsutil 8dot3name set 0"     
    Sample command to enable on one volume:
      "fsutil 8dot3name set X: 0"  
    Note that this needs a reboot to take effect.  You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:). 
    For further information  http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
    -Thanks
    Vinod
    **Encourage Contributors. RATE them**

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • Does the lnkfix_vista.zip work for window server 2008 R2 enterprise ?

    All icons on my exchange 2010 server show as .lnk, any icon I click on starts notepad... does the lnkfix_vista.zip work on Windows server 2008 R2 enterprise ?
    thank you.

    This issue because there is no SPN for the Front End pool FQDN. Rather than adding an SPN I just deleted my front end server from the topology builder and added a new one using the FQDN of the actual lync server and it worked fine.
    Also you can refer below link
    http://howexchangeworks.com/2013/07/creating-central-management-store-fails-while-publishing-lync-2013-topology.html
    Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

  • Can't upgrade Windows Server 2008 R2 Enterprise to Windows Server 2012 R2 Standard

    Even though the "Windows Server Installation and Upgrade" TechNet article (DN627667) claims that I can upgrade Windows Server 2008 R2 SP1 to Windows Server 2012 R2 Standard, it seems I can't. I get an error message saying "Windows 2008
    R2 Enterprise cannot be upgraded to Windows Server 2012 R2 Standard (Server Core Installation). You can choose to install a new copy of Windows..." What might be causing this issue? Thanks for any input! :)

    Hi,
    Firstly, for retail versions, Windows Server 2008 R2 Enterprise with SP1 can be upgraded to Windows Server 2012 R2 Standard/Datacenter.
    I assume you are running Windows Server 2008 R2 retail version, right?
    In addition, it seems that in earlier version than Windows Server 2012,
    once you install the server in Core or with GUI mode, you could not switch to the other. The only option was to rebuild the server from scratch.
    Did you install Windows Server 2008 R2 in GUI? If yes, I recommend you to upgrade it to Windows Server 2012 R2 in GUI
    mode to see if the issue persists. If it succeed and you want to run in server core, you can just remove the graphical shell and convert your Windows Server 2012 R2 to Server Core.
    Best regards,
    Susie
    Thanks for replying Susie. The 2008 R2 software is the one provided by Microsoft for Action Pack subscribers, so I'm assuming it's not retail. That's another thing, I think I should be installing the GUI as my 2008 has a GUI, not just the server core. For some
    reason I missed that and clicked on the server core only install!

  • Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

    Hi, SDN experts.
    I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
    I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008  enterprise edition.
    I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
    When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
    =======
    The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
    Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
    You can check the current version of you operating system by runningu2026u2026..
    ========
    Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
    Thanks,
    KC

    Hi,
    I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.    
    I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
    "OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
    I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
    Do you know which kernel I should install?
    I browsed in:
    SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
    SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
    I downloaded:
    SAPEXEDB_291-20001361.SAR      Kernel Part II (for Basis 7.00)       291
    Is this the right Kernel patch I should use?
    If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
    Thanks,
    KC

  • How to enable javascript in windows server 2008 R2 enterprise ?

    Hi all,
    Hope doing well,
    sir i am using windows server 2008 R2 enterprise operating system.
    i am running my web application in localhost. it's working fine.
    but i have used timer using javascript and some javascript function that is not working in this application.
    i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
    i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
    enabled javascript and my application is not working.
    plz help me. it's urgent
    waiting for reply.
    thanks in advance.
    vicky Bangalore

    Hi Vicky,
    Please make sure that the Javascript is enabled on you IE.
    To do this, please go to Control Panel->Internet
    Options, click on security tab,
    click on customer level button. Please scroll
    down to Scripting, underScripting
    of Java applets, click enable.
    OR
    Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise

    Please help me about a issue of TMG 2010:
    My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
    then start it again. Check for related error messages."
    and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
    installed application filters and restart the service."
    I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
    i have try update windows and TMG latest but can not solved this issue.
    i hope everyone help me as soon as. thank you so much.

     
    HI Luis,
    Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
    Disable
    Antivirus
    Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
    Try -
    http://support.microsoft.com/kb/2649961
    http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
    Ensure you have enough space for Log to be stored

  • Activating Windows Server 2008 R2 Enterprise 180 Eval after Upgrade from Win2K8R2 Standard

    I had a licensed instance of Windows Server 2008 R2 Standard.  It is an OEM License.
    I wanted to try Windows Server 2008 R2 Enterprise for 180 days without rebuilding the whole machine so I entered "DISM /online /Set-Edition:Enterprise" on the command line and now I can use the enterprise features. 
    The problem is that I have 30 Days to activate.  When I attempt to activate, it says "Error: 0x8007232B DNS name does not exist"
    How can I activate the 180 day trial?

    I had a licensed instance of Windows Server 2008 R2 Standard.  It is an OEM License.
    I wanted to try Windows Server 2008 R2 Enterprise for 180 days without rebuilding the whole machine so I entered "DISM /online /Set-Edition:Enterprise" on the command line and now I can use the enterprise features. 
    The problem is that I have 30 Days to activate.  When I attempt to activate, it says "Error: 0x8007232B DNS name does not exist"
    How can I activate the 180 day trial?
    "Error: 0x8007232B DNS name does not exist", suggests this server is now configured as a KMSclient, and it is trying to contact a KMShost to perform activation. It is not being returned any SRV records from your DNS, when it queries for _vlmcs._tcp
    If you do not have a KMShost server implemented, you need to input a suitable ServerEnterprise product key.
    When you purchase your ServerEnterprise license, you will be given a product key to use for this.
    For this task, you can use slmgr.vbs /ipk
    For your trial, you could use the method slmgr.vbs /rearm
    this will only succeed 3 times, I think.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Install Sharepoint 2013 Foundation on Windows Server 2008 R2

    Could anyone please help me with the steps to install the Sharepoint 2013 foundation (including SQL express) with Windows Server 2008 R2 ?

    You just need to download Foundation, run the pre-req installer, then run the setup executable, select Single Server, and this will install both SQL Express and Foundation.  This isn't typically a 'recommended' setup, but it is an easy one.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Error: 0x800f0826 recived when installing SP1 of windows server 2008 R2

    Tried to install the Windows server 2008 R2 SP1 but  failed with the error code 0x800f0826.
    The update  install fine and when reboots it says "Installation was not successful"  Error 0x800f0826.
    I already follow steps as mentioned in this http://support.microsoft.com/kb/2505743 , but still no success.
    plz. advice
    SALMAN

    Below are the CheckSUR.persist  logs.
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 15.0
    2012-06-01 23:21
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 868
     No errors detected
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 15.0
    2012-06-04 11:26
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 557
     No errors detected
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 15.0
    2012-06-04 11:53
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 271
     No errors detected
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 15.0
    2012-06-04 12:47
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 15.0
    2012-06-04 12:51
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 132
     No errors detected
    SALMAN

  • Installation of Exchange Management Tools on Windows Server 2008

    Can I Install Exchange 2003 System Management Tool on Windows Server 2008?

    Hi,
    Exchange 2003 System Management Tool is not supported on Windows Server 2008 as well. As a workaround, you can install it on Windows XP. Here is a helpful article for your reference.
    Exchange Server and Windows Server 2008
    http://blogs.technet.com/b/exchange/archive/2007/08/16/3403679.aspx
    Hope this helps.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • SP1 for Windows Server 2008 R2 - Host ok for VmWare Server 2??

    Hello,
    I am running a VmWare Server 2.02 on a Windows Server 2008 R2 - Host. Are there any known problems with regard to VmWare Server 2 when installing SP1 on the Windwos Server 2008 R2 - Host? I was reluctand to install SP1, because I was unable to find information to that question. Has anybody out there with the same configuration done the SP1-Update already?
    Regards,Martin Kluge

    Thanks.. That's what I wanted to hear..
    any updates since you posted this thread? still working?
    It amazes me that they killed off Server, they could have moved it to paid and we would have been happy.
    ESXi is great if your hardware supports it, ours doesn't.
    We upgraded our linux OS when we did some disk upgrades on our secondary server a few weeks ago only to find server can't run on 2.6.41.. so -- its going to windows r2 2008.

Maybe you are looking for