Exchange Mails are not getting updated properly without refreshing

From couple of days, exchange mails are not getting updated properly without refreshing.
Kindly suggest.

Kindly suggest a solution

Similar Messages

  • HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.

    Hi all,
    HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
    And even the input data contains the both the fields HIRE DATE & FIRE DATE
    Can any one please suggest us why its happening.
    Thanks,
    Lava.

    Hi Girishkg,
    The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
    The limit can be set in web application’s web.config file or in IIS .
    There are two detailed articles about setting the limit:
    http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
    http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
    Feel free to reply if the issue still exists.
    Best regards
    Wendy Li
    TechNet Community Support

  • CPS parameters are not getting updated in SAP

    We have recently migrated our SAP and CPs servers, after that we are  facing few CPS issues  and it is affecting lot of key batch jobs. One typical example is given below.
    CPS is supposed to trigger a job  DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006  and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g)  It is showing as 4-jan-2011,  I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
    Has anyone faced similar kind of issue. share you experience
    Regards,
    Ramprasad.

    Hi ,
    PLease find attached out XBP version
    XBP connection pool for SAP system ISU
      XMI interface version           : 2.0
    Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
    Basically what happens is
    So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are  not used for due date calculation.. CPS just copies the source date-id to target id  and similarly for the due date based on the difference
    source_id variant date 01-12-2006   due date 02-12-2006  ( Next day)
    Target_id Variant date 25-12-2010  due date 26-12-21010  ( Next Day)
    I tried changing the Source date id from 01-12-2006 to 24-12-2010.
    Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
    Target Variant date 25-12-2010  due date 05-01-2011 ( 10 Days)
    Regards,
    Ram

  • Backened documents are not getting updated in Classic Scenario

    Hi,
    We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
    Is there any business functions to be activated.

    Hi Sunil,
    You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
    If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
    Best Regards,
    Anu
    Edited by: Anuradha UG on May 18, 2010 8:09 PM

  • Taxes are not getting updated in PO

    Dear All,
    I have done some changes in pricng and tax calculation procedure.
    But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
    Is there any other way for updating the tax calculations at invoice tab in PO.
    Regards,
    Rakesh

    >
    Rakesh  Shelar wrote:
    > Dear All,
    >
    > I have done some changes in pricng and tax calculation procedure.
    >
    > But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
    >
    > Is there any other way for updating the tax calculations at invoice tab in PO.
    >
    > Regards,
    > Rakesh
    Only other way possible is abap script to be made to change Po data without changing the release. Otherwise you need to unrelease the Po's first, then change the data and then save for your changes to get affected.

  • Few keyfigures are not getting updated in the backup cube

    Hi,
    We run the daily backup process chain which extract data from planning
    area and store in the cube & ods.
    There are infopackages which update cube & ods, the datasource & info
    source is same for both ODS & backup cube.
    But a few keyfigures do not get updated in backup cube where as we see
    ODS getting updated for those keyfigures. Also there exist data in the
    planning area for these keyfigures.
    There is direct mapping between the keyfigures in cube & planning area.
    We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
    There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
    Need expert opinion on this.
    Regards,
    Chetana

    Hi Chetana,
    Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
    Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
    ~Rishi

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    you have encountered activation lock.  Read iCloud: Activation Lock

  • Changes to Excel files are not getting updated

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.

    Hi,
    According to your post, my understanding is that changes to Excel files are not getting updated.
    I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
    For more information, you can refe to:
    Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
    If you use PowerPivot, you can refer to:
    Refreshing PowerPivot Data in SharePoint 2013
    If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
    You can refer to:
    PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Reputation points are not getting updated..!!

    Hello Community,
    TITLE: Reputation Points are not getting updated.
    I think the reputation points are not getting updated as I noticed that there was two likes on my comment in two different discussion but I did-not see any points increase in my profile, I am not sure if any one else is experiencing the same.!!
    Regards
    Kumar

    Thanks Jason, probably I missed the announcement.
    Regards
    Kumar  

  • Registers are not getting updated

    Dear all,
    I am new to CIN.
    My Problem is that RG registers which need to be up dated while reciving the excisable material are not getting updated, or else i am not finding way to see them. can any one help me?
    Prabhash

    Hi
    Refer the link
    http://help.sap.com/saphelp_47x200/helpdata/en/de/8b6a158bef9844b00635a468856274/frameset.htm
    Regards
    Ramakrishna

  • Some outgoing e mails are not getting through

    Some of the people I e mail are not getting any of my e mails. I use the verizon e mail online not outlook express or any other software. Most of my e mails are getting through but not all. Anyone have an idea why this could be happening? It's not that my e mail is blocked on the other end. One of the recipients is my dad and he isn't getting my e mail. I walked him through his setup and he does not have me blocked and I am in his address book.

    Is there a particular domain you are having trouble with? Are you getting any delivery delay/failure messages?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Master Data is not Getting Updated Properly.

    Dear Expert,
    I am trying to pull the data by Info package but The text is not getting updated.
    The Master data object is    0BPARTNER .  To update this Master data , we ghave 2 info packages
    0BPARTNER_ATTR   and    0BPARTNER_TEXT.    But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
    What could be the Reason for this and How can I solve this issue  ?
    Tahnks,
    Utpal

    Hi,
    Could you please check the data in RSA3.
    If everything is there in R/3 side.Then,please check are you giving any
    condition in the infopackage .
    Please run the infopackage without giving any condition.
    Thanks,
    Saveen Kumar

  • CCS Details are not getting updated to COPA in Sales Order Settlement(VA88)

    Dear Experts,
    Our scenario is MTO with valuated material.
    1. Production order is tagged to Sales Order.
    2. Production order is settled to Material and variance is getting posted to COPA.
    3. At the time of Delivery, COGS Debit (Cost Object- Sales Order), Credit - Inventory.
    4. At the time of Billing, Accounting Document is getting generated, COPA document is not getting generated.
    5. We  are not executing WIP. (as per Business process)
    6. Settlement is done thru transaction code VA88. COPA Document is getting generated.
    I am facing the following issues in the above MTO process.
    1. At time of sales order settlement thru VA88, In COPA, only COGS is getting as updated with one value field i.e. Material Cost.  Cost Component data (Material Depreciation, Labor etc..) is not getting updated to COPA.
    2. When I settle the Sales Order thru VA88, Billing Quantity is not getting updated to COPA though Quantity field mapping is done properly.
    Please help me how to resolve the above issues.
    Note: Same Cost Component Structure, we are using for Make to Stock scenario. Cost Component Data is getting updated Properly to COPA  (at the time of Billing)
    Regards,
    vgl
    Edited by: vglokam on Aug 31, 2010 10:52 AM
    Edited by: vglokam on Aug 31, 2010 10:54 AM

    Hi
    1. CCS (Cost Comp Split) wont be updated to COPA if you settle via sale order.. In sale order, COGS cost element is posted.. the same will get settled to COPA as one single value...
    In MTS, the CCS gets updated to COPA upon billing because of the "valuation" strategy customization... Billing posts to COPA in that case, COPA gets Sales Qty and it is valuated with CCS to give you the break up.. But, in your case, Billing is not posting to COPA, but to sales order.. hence, there is no qty flow into COPA upon billing.. thats why you dont get CCS for MTO
    2. The sales qty should be updated to COPA upon VA88.. For this, make the following settings in your PA transfer structure which is used during VA88
    1. Go to KEI1, Select your PA transfer structure...
    2. Add an assignment line in it... Check on "Qty Billed/Delivered" in the assignment line
    3. In the Tab "Value Field" below "source", assign Qty Field
    Now when you settle, it should update qty as well
    regards
    Ajay M

  • CJ20N-fields are not getting updated in table PROJ

    Hi all,
    I have a requirement where I need to transfer the WBS element data created in one system to another using IDOC.
    The idoc has generated sucessfully and was also sent/processed successfully in the recieving system but fields STSPD and STSPR are not getting poulated in table PROJ.
    In the confic I have assigned FM:IDOC_INPUT_PROJECT to the process code.
    Thanks,
    Gaurav

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

Maybe you are looking for

  • Creating a new CI for each rule in a current CI using PowerShell

    I have a client investigating DCM and for reporting reasons they'd like EACH RULE in a CI to be it's own CI (so it's stored server side and they can report on it). They've imported the Windows 7 baseline recommended by MS and now would like to extrac

  • Overtime calculation in TM00.

    Hi Experts, I am implementing positive time management and requirement for overtime calculation is as follows: if employee works number of hours more than his/her daily work schedule the overtime wage type should get generated for the excess hours. e

  • Catch client disconnect without sending data?

    I am writing a Java Servlet and I need to know if the client has disconnected (pushed the stop button, closed the browser, etc) without sending data. Basically, I need to call socket.isOutputShutdown() on the connected socket. However, the Java Servl

  • Safari on iPhone 6+

    Can you make safari full screen in landscape view on iPhone 6+?  I cannot stand browsing with the split screen.  Thanks!

  • Can't transfer music to external hard drive.

    Whenever I try to move a file it says it can't be modified. How do I get around this?