Exchange Rate amount is not calculating correctly in iProcurement

Hi All,
The exchange rate is mismatching when i create a requisition in the iProcurement (11.5.10.2 version).Please find the below test case and suggest me accrodingly.
Example: on 06-May-09 and 07-May-09 i have create a requisition in the iProcurement with the currency as BHD (Note: Our functional currency is USD). The exchange rate is defined from USD to BHD is .377 and this rate is fixed for the entire month.
The requisition created in the following manner:
Requisition created in 06-May-09:
=======================
Line #1 120 BHD---the exchange rate amount in USD is 318.22
Line#2 20BHD---the exchange rate amount in USD is 53.04
=========
Total : 371.25
Requisition Created in 07-May-09:
====================
Line #1 120 BHD---the exchange rate amount in USD is 318.30
Line #2 20BHD---the exchange rate amount in USD is 53.05
============
Total: 371.35
Form the above test cases can any one help me why the requisition amount is slightly chagned from 371.25 to 371.35 even though we are using the same conversion rate (.377)..plz help ASAP , this is an very urgent for ME.
Regards,
Kevin.
Edited by: kevin329 on May 7, 2009 4:53 AM

hi
check whether you have maintained the exchange rate settings also check whether price is maintained

Similar Messages

ERROR in MIRO : An exchange rate type is not defined for country IN

Experts:
When I try to enter the invoice received from the vendor, I am getting the following message.
An exchange rate type is not defined for country IN
Message no. FF802
Can anyone provide me a solution for this?
Thanks,
Vijai

This is the explanation given in note 974619 for the above error message
Summary
Symptom
When you post an FI document, the system issues error message FF 801 or FF 802.
Other terms
Plants abroad, FF 801, FF802
Reason and Prerequisites
You use the 'Plants abroad' function.
See Note 882132 for more information about this.
Solution
If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
- Country currency       (Field WAERS)
- Exchange rate type     (Field KURST)
- Net discount base      (Field XSKFN)
- Net tax base           (Field XMWSN)
You must maintain the fields 'Country currency' and 'Exchange rate type'.
Otherwise, the system issues error message FF 801 or FF 802.
thanks
G. Lakshmipathi

Exchange rate over ride not possible

Hello
we have for a certain date the exchange rate defined in TCURR as GBP->USD @ .50448 for usage type "M".
But for few entries we want the exchange rate to be a different value. When we enter the document via FBV1 - we put the amount as 200 GBP (company code currency) and the exchange rate as 1.620 and save the document.
But when we look at the document the amount in group currency (USD) is being calculated at the older exchange rate from TCURR table and not from the one we entered on the screen.
Thanks.
TZ.

Found the answer.

TT89 for MN - Not calculating correctly

Hi,
TT 89 for MN is not calculating correctlty - BSi Message status is as appended below.
2000
NO COMPANY UT EXPERIENCE RATE INFORMATION FOR THE MINNESOTA STATE UT TAX WAS FOU
ND. THIS TAX HAS BEEN CALCULATED USING THE BASE RATE. THIS RESULT MAY OR MAY N
OT BE VALID FOR YOUR COMPANY
Currently we are at TUB 52 ( Version 9.0 ) and i have iconfigured the TT 89 in the Tax Model. Howver TT89 is not coming correctly. ( T5UTX value is .005 ) .
With Regards,
Abhishek

Hello,
Please check T5UTI for tax type 89 unemployment note down the Employer ID. Then with the Employer ID go to the T5UTH table and check if there is an entry there. If not, can you please maintain the T5UTH table with an appropriate entry for Employer ID?
2000
NO COMPANY UT EXPERIENCE RATE INFORMATION FOR THE MINNESOTA STATE UT TAX WAS FOUND. THIS TAX HAS BEEN CALCULATED USING THE BASE RATE. THIS RESULT MAY OR MAY NOT BE VALID FOR YOUR COMPANY
Then this means that you haven't overrided the UT experience rate for MN state for your company 'xxxx' in the appropriate dataset in BSI Server.
Please maintain the Company UT exp rate for NM state in the respective datasets and then run the payroll. This will solve the issue.
Kindly maintain the BTXRATE for it at SAP side as well as BSI Side also
Kindly maintain following in your Tax factory for your dataset --> Group Overrides >Choose your Employee Group > Maintain record for MN.
With regards,
S.Karthik

Exchange rate difference is not coming

Dear proffessionals,
1) I have created the PO with Ex.rate 35.65 ,not fixed
2)GR Completed for the Po.
3) While parking an Invoice in MIR7 wrt PO,and entered the Clearing date as
3 months back date.I am getting only K & S but not "M'.
4) Material price maintained as mvg avge price.
But before giving the PO number I have given manually Currency as USD and current exchange rate and Clearing date as 3 months back date KSM is coming correctly .
Pls explain me what could be the reason.
Regards,
KLN

Hi
Can you check PO document date in header - whether exchange rate has been maintained at that time?
If it was 3 months back dated, then if you do invoice with same date system should prompt exchange rate. And also check Gen settings -> currencies -> Enter exchange rates once.
Thanks

Use Current Exchange Rate from the Exchange Rate Table itu00B4s not working

Hi Experts:
Working with manager user, Iu2019m trying to create a Goods Receipt PO through the Draw Document Wizard, but the option u201CUse Current Exchange Rate from the Exchange Rate Tableu201D it is not working, it does not bring me the USD exchange rate of today defined in the table; it brings the USD exchange rate from the base document (AP Reserve Invoice), and Iu2019m not allowed to change it. What should I do?. We are working wih SAP Business One SP01 PL06. Thanks
CLAUDIA

Hi,
There is a SAP Note related to your issue, have a look at this.
[http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_sbo_adm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373033303238%7d]
...For companies using the Continous Stock System feature, there are three additional scenarios in which the row Exchange Rate will be copied from the base document regardless of the calculation method chosen in the 'Draw Document Wizard':
a) Goods Receipt PO -> Goods Return.
b) Goods Return -> Goods Receipt PO.
c) AP Reserve Invoice -> Goods Receipt PO.
Hope this helps,
Son.

Exchange rate type M not picked in FB60 foreign currency entry

Hi
My local currency is   USD. I   have defined exchange rate for   ' USD and EUR   '    for exchange     type M and type EURX.
In FB60, system picks the exchange rate defined for exc. type EURX,   but   I   want it to pick exch. type M.
Also i   have set   exch type M in docu type KR.   Still it does not pick   exc type M.
Pl advise
Thanks
kamala

I am thinking that most likely you have specified EURX as Alt. ERT (alternate exchange rate type) for exchange rate type M for the currency pair USD:EUR in IMG node 'Define Translation Ratios for Currency Translation" (T Code OBBS). Remove it and retest FB60; it should pick the M rate.

Excel not calculating correctly.

Using OS 10.5 I am getting incorrect answers using Excel. Switching back to OS 10.4.10 corrects that problem. Since I make my living with my Mac spreadsheets I will curtail my use of OS 10.5. So far I have found no new item worth the change of Excel not working correctly. Numbers gives only about 1% of what I need so don't say to use Numbers instead. I've tried it & used a spreadsheet for a few weeks, but stopped because of how slow Numbers is plus I had to do a lot more work to get it to do a very simple job. This was a sheet set up new in Numbers, not one that started in Excel & was translated.
I've had some minor problems with OS 10.5 that something stopped working, but it was not any of my known running programs. I'm glad that I have OS 10.5 mounted on an external FW800 drive.
Has anyone else had trouble like I have with Excel or with another problem with some program looking like it works, but giving incorrect answers?

Just so I can give clients better advice, can you give a specific example of a calculation that works in Tiger, but fails in Leopard?

Exchange rate type P not getting picked up while executing KSUB-Plan Assess

Hi,
We have Exchange rate type "P" maintained in SPRO in Maintain versions for the Fiscal Year 2010, but even then when I execute KSUB, it posts with Exchange rate type M.
Has anyone faced this issue? We want it to pick up P and not M.
Regards,
SAPFICO

Hi, set it here IMG-Controlling-Cost Center Accounting-Planning-Basic Settings for Planning-Define versions-Maintain Settings of Version in Controlling Area then Setting for each f. year , double click on current f.year

Calculating Average on a Pivot table- Not calculating correct

Hello All BI Techie's,
I have a requirrement, which is calculating the average out of a column , this column is aggreated by sum in the rpd.
Month Year      Associate Headcount      Involuntary Termination Count (Associates)
2012 / 07      18878.0      55
2012 / 08      18817.0      53
2012 / 09      18770.0      63
Grand Total      18770.0      17
Now, I want calculate a column which gives the average of Associate Headcount, ( 18878+18817+18770)/3 , how I can achieve that?
I tried, using avg(associate headcount), it not returning correct average, any insight?
Please share your ideas.
Thanks,
Bala

Thanks Srini, The tried your solution but still the problem exists.
I have created a new column, called Avg Headcount and entered condition in the column, I am using pivot table.
max(rsum("Workforce Profile Facts"."Associate Headcount"))/max(rsum(1))
Actual Results
Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
2012 / 07      18878.0      55      18907.8
2012 / 08      18817.0      53      18878.0
Grand Total      18817.0      108      18878.0
Expected results
Month Year      Associate Headcount      Involuntary Termination Count (Associates)      Avg Headcount
2012 / 07      18878.0      55      18878
2012 / 08      18817.0      53      18817
Grand Total      37695.0      108      37695/2 = 18847.5
Eeven my Associate Headcount, pivots grand total was wrong, my instanceconfig.xml already setted to aggregate enabled.

Exchange rate in PO not updated according to OB08 definied

I have a problem to retrieve the updated exchange rate, I defined the exchange rate in M exchange rate type from time to time, but when I create the PO, it always used the old exchange rate, is the exchange rate configuration only uses OB08 and OB07? did i miss anything else? please advise!
Elaine

Hi,
This is related to SD query. pls put in Sales & Distribution blog and get immediate reply.
Anil

Selling Exchange rate type is not picking while billing

Hi,
We have maintained Exchange rate type B for selling and the same was assigned in customer master as well as the RV document type. While raising sale order system is picking the B rate from OB08 table, but at the time of billing system is taking the M rate. Where do i set a control to pickup only B rate? Can anybody help me on this.
govind.

Hi,
Ideally at the time of billing, exchange rate type is picked up from the document type (RV in your case). However if the rate is picked up for standard exchange rate type, check if there is user exit being called for exchange rate type.
Thanks,
Aman

Exchange Rate Date is not Upating for non-catalog request types in iProc

Hi,
The Exchnge rate date is not updating for some non-catalog request types in iprocurement (11.5.10.2 version) and this happening only for some request types only.
can any one help what could be the reason.
Regards,\
Kevin.

Hi Venkat
i suggest you to go thru the dev guide ..... but to answer your question i would say....
**** It looks like "Define Information Template" form only accepts Independent Value Sets and not table based Value Sets (thatinvolve SQL statements).
Well in OAF to display a dropdown list all you need is a query .. so one can write a query to extract the values from a independent value set .... but the same is not possible with table type value set instead you can use the same query used to define the table type value set .
You can create a LOV (one with flash light) even with a independent value set ....
To create a LOV you need a View Object(query which will fetch valid records) and a Public Region (to display)
if you ahve these then you can achive the requirement thru personalization
if the VO and Region are not present then you have to create them .......
Once you are thru the dev guide please go thru the link below which shows adding a lov to an existing page thru personalization....
http://oracle.anilpassi.com/create-lov-based-field-using-personalization-in-oa-framework.html
Thanks
Tom....

JEXS not calculating correctly

Hi Gurus,
IN MM pricing i have defined sub total 1 and given JEXS condition to caluclate the tax on the sub total 1,but it is calulating on the whole amount,i.e value after those also considering for tax calculation.
Why the system is not calulating fromn the step i have defined,
In TAXINN against BASB 362 is defined
Kindly guide where i am doing mistake.

Just so I can give clients better advice, can you give a specific example of a calculation that works in Tiger, but fails in Leopard?

Group Totals Not Calculating Correctly P6 7.0 SP 4.0

Hi there,
For no reason I can tell, my schedule has suddenly started showing Group Totals in my layout that do not add up correctly, although the activity durations are correct.
From past experience this is usually a calendar issue. I am using a Project Calendar, and the Hours per Time Period checkbox to use assigned calendar is ticked. I am using a 11hr / Day, 7 day a week calendar. Upon looking into the Global calendars, a 38hr week calendar is clicked as a default. Could this be causing the issue? I have done some calculations and it appears that some of the totals are being calculated on a 38hr week, but not in every case.
I know the Global calendar issue was a problem in V6.0 but I was under the impression that the Project Calendar would overide in v7.0. is this the case?
Is there something else I may be missing? The only major work that has been done recently is a colleague removed all the WBS Summary activities from the schedule.
Can anyone provide any way forward?
With Regards,

Hi there,
For no reason I can tell, my schedule has suddenly started showing Group Totals in my layout that do not add up correctly, although the activity durations are correct.
From past experience this is usually a calendar issue. I am using a Project Calendar, and the Hours per Time Period checkbox to use assigned calendar is ticked. I am using a 11hr / Day, 7 day a week calendar. Upon looking into the Global calendars, a 38hr week calendar is clicked as a default. Could this be causing the issue? I have done some calculations and it appears that some of the totals are being calculated on a 38hr week, but not in every case.
I know the Global calendar issue was a problem in V6.0 but I was under the impression that the Project Calendar would overide in v7.0. is this the case?
Is there something else I may be missing? The only major work that has been done recently is a colleague removed all the WBS Summary activities from the schedule.
Can anyone provide any way forward?
With Regards,

Exchange Rate amount is not calculating correctly in iProcurement

Similar Messages

Maybe you are looking for