Exchange Rate Date is not Upating for non-catalog request types in iProc

Hi,
The Exchnge rate date is not updating for some non-catalog request types in iprocurement (11.5.10.2 version) and this happening only for some request types only.
can any one help what could be the reason.
Regards,\
Kevin.

Hi Venkat
i suggest you to go thru the dev guide ..... but to answer your question i would say....
**** It looks like "Define Information Template" form only accepts Independent Value Sets and not table based Value Sets (thatinvolve SQL statements).
Well in OAF to display a dropdown list all you need is a query .. so one can write a query to extract the values from a independent value set .... but the same is not possible with table type value set instead you can use the same query used to define the table type value set .
You can create a LOV (one with flash light) even with a independent value set ....
To create a LOV you need a View Object(query which will fetch valid records) and a Public Region (to display)
if you ahve these then you can achive the requirement thru personalization
if the VO and Region are not present then you have to create them .......
Once you are thru the dev guide please go thru the link below which shows adding a lov to an existing page thru personalization....
http://oracle.anilpassi.com/create-lov-based-field-using-personalization-in-oa-framework.html
Thanks
Tom....

Similar Messages

  • PO Partial confirmation Quantity not updated for non-catalog items in SRM

    Hi Experts,
    Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
    Steps to Reproduce:
    1) Create a purchase order.
    2) Confirm some part of the quauntity and reject the balance part in Ariba.
    3) Open the link in SRM and click Copy push button.
    4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
    Expected Result:
    PO should update the changes done in Ariba.
    Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as  in the Catalog items partially confirmed POR is copied onto PO.
    kindly give your valuable inputs to poceed furthur.
    Regards,
    Chandu

    Hi,
    I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
    BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
    Regards,
    Masa

  • IProcurement - "mass upload" for non-catalog request

    I want to find a way to do a "mass upload" when creating a non-catalog request.
    Some back ground; I am not A DBA or a software developer; I am an engineering manager. I work for a large company and have responsibilities for creating Purchase Requisitions. I work from vendor quotes that contain many lines items, and always do non-catalog request because I often get special pricing or simply have non-catalog items. There are several fields on the requisition web page that need to be populated and it's quite cumbersome and time consuming to copy and paste 6 different data fields for 50+ line items. Since these are fields on a web page that correlate to some back end database there must be a way to populate them more quickly and easily, with an upload template, or via an API.
    It is very, very difficult to find the proper internal resources to help me address this problem, and when I do find the right people I'm pretty sure I'll be told "it can't be done" I don't believe it can't be done. It may be difficult, it may require some work, it may require some development efforts, but from a purely technical point of view, populating multiple data fields with minimal user input is certainly doable. I want to be armed with solutions when I finally find the right people at my company. So, anybody out there figure this one out already? Once I do I'll be glad to share but hoping it's a know and fixed issue.
    Thanks!!

    You are looking for the requisitions Open Interface.
    Get this PDF from the documentation for release 11* and read chapter 6, it will guide you through the import process.
    *For some reason this document is not available for newer releases (11i, 12), so you would rely on Metalink to look for notes.

  • IProcurement Non Catalog Request Type Field

    Greetings to All,
    Currently, having an issue in iProcurement. Under Shop-Non Catalog Request, there is an option to have "Request Type" field to be available.
    This field and LOV is not showing up.
    Per iProcurement Implementation Guide Release 11i Part No. A85361-05 December 2004
    Specifically:
    Section 4-52
    Page 158
    This is section describing "Setting Up Non-Catalog Request Templates"
    There is a 'Request Type' dropdown at the top of the page, just above 'Item Type'
    Request Type is not coming about.
    Is there a smart form setup / preference or a Profile Option value that controls this feature.
    Any help would be greatly appreciated.
    Thanks

    You are right Mr. CK..
    If you check stores --> Smart Form --> Personalize "Default Item Information", you will find ${oa.NonCatalogRequestVO.IsTemplateBased} inside the personlization form.. It indicates "Request Type" is dependant on a template i.e. non-catalog request template.
    Thanks for your answer.. Indeed it is helpful.
    Regards,
    S.P DASH

  • Error "Data packet not complete; for example, 000013" when reading from PSA

    Dear all,
    I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
    e.g.
    Data package 1 : everything OK
    Data package 2 : everything OK
    Data package 3 : everything OK
    Data package 8 : everything OK
    Data package 10 : everything OK
    Data package 12 : everything OK
    Data package 13 : everything OK
    what happen to data package inbetween e.g. DP4, DP5 etc etc?
    In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
    Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
    Data packet not complete; for example, 000013
    Request has errors / is incomplete
    I got 2 questions here...
    1. why do i have missing data package and it still showes me a green idicator?
    2. how can i solve this and is this something i should be worried about?
    Thank you very very much!

    Hii SCHT,
    you encounter these type of errors rarely...
    but in RSMO screen, check for any TRFCs struck..
    also go to the JOB in Source System and analyze the JOBLOG,
    there you can find some information about what tht particular job did..!!!
    and after that check for the same in the BW system...
    perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
    Force the request RED and repeat the IP again...
    you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
    Regards
    Prince

  • Regarding rate, sales tax and discounts for credit memo request and returns

    Dear  ALL,
    Rate column is not displaying for credit memo request. suppose credit memo should be given due price diifererence
    with referance to billing documnet credit memo request to rised. but if i want to edit rate column is not available.
    how vat and discount has to be captured in case of rate diifferance for credit memo.
    In case of returns will taxes applicable for returns credit memo
    Gl accounts for credit memo same as billing or different GL accounts to be maintained or not
    client has the scenario that if credit memo request has been rised for with referance to billing due to rate differance.
    If customer returns materilas belongs to same billing. so based on the returns order returns credit memo to be rised .
    But how the sap captures exact price of the materila during returns. ie; price modified during credit memo request.
    Thanks & Regards
    ramesh

    HI,
    Remove all the other condition types from the procedure and keep only those which you need.
    Regards
    Abhilash

  • There is no item number field available in non catalog request screen

    Hi,
    I need help in understanding how the Contract purchase agreement works with i-procurement.
    1. created contract purchase agreement
    2. Setup the item
    3. Setup the price list for the item
    4. Setup the ASL for the item and referenced the CPA number in source document region.
    5. Created Sourcing rule for the item.
    I have no issues in defaulting sourcing information (supplier name, site name, source document number) when creating a requisition in core apps forms but how to setup the same feature in i-procurement? I selected non catalog request type but I don't see item number field available.
    Please advise.
    Thanks,
    Ram

    Hi,
    First we need to know which version you are in - 11i or R12.
    Also, non-catalog request is not used for the requisitions with Inventory Item.
    Just search for the Item number or description in the iProcurement and see whether the search result shows your item.
    Internal Item number field will show the Oracle Item number.
    Thanks,
    PS.

  • Exchange rate of USD in INR for date could not be determined

    Hi
    I have a problem while creating a RE Sales order.
    Error is :
    Exchange rate of USD in INR for date 21.07.2006 could not be determined
    Help will be appreciated.
    Regards,

    Hi,
    Pls check the following things:
    In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
    Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
    For the date mentioned, the exchange rate might be missing here.
    Hope, this helps!
    Thanks,
    Siva

  • Exchange rate date for FI (VBRK-KURRF_DAT) on invoice

    Hello
    Where I will find Exchange rate date for FI (VBRK-KURRF_DAT) on invoice? Is it hidden field? I just see on header level exchange rate.
    Is exchange rate for postings taken from billing date or pricing date?
    Thanks in advance.
    Margaret

    SO VBRK-KURRF (exchange rate for FI)  is taken from "pricing date" in standard?
    Are you 100% sure? :
    FIrst of all: there is no pricing date (PRSDT) on invoice header level
    Second: I`ve got information from FI that VBRK-KURRF is taken from posting (billing date) VBRK-FKDAT
    I have found also programs, there is provided folloving calculation formula:
    LV60AA90
    Currency conversion (WAVWR is in local currency so far)
            ACTDATE = VBRK-KURRF_DAT.
            IF ACTDATE IS INITIAL.
              ACTDATE = VBRP-PRSDT.
            ENDIF.
            DA_WAVWR_HW = VBRP-WAVWR.
            DA_WAVWR_KW00 = WAVWR_KW00.
            DA_WAVWR_PCVP = WAVWR_PCVP.
    LV60A036
    Determine date
        IF vbrk-kurrf_dat IS INITIAL.
          ld_kurrf_dat = vbrk-fkdat.
        ELSE.
          ld_kurrf_dat = vbrk-kurrf_dat.
        endif.
    So what is the verdict?

  • Help with MIRO Badi's and Translation Date (Exchange Rate Date Reference)

    Dear experts
    This is a problem I have read a lot about, but none of the answers work properly and I wanted to create a new thread in order to try to compile a final answer for this problem (at least in version 6.0)
    As you know Standar SAP uses posting date as translation date in MIRO for foreign currency.
    This is not always true (imagine Crude Imports with 3 dates: Invoice date, posting date and Bill of Lading date. The last one happens to be the fiscal date for exchange rate in my county and the other two are also mandatory).
    I am proposing thus to use 3 dates: Document date as invoice date; posting date as posting date and Invoice Receipt Date
    (REINDAT - RBKP) as Bill of Lading date. I would like to implement this third date as translation date.
    Lot of ways to do it, but none works properly as for the end user it is complicated to enter data in a certain way so that BADI's work properly. I have implemented note 574583 and only works with some restrictions.
    I have also used some more BADI's like MRM_HEADER_CHECK, FI_TRANS_DATE_DERIVE, INVOICE_UPDATE,... and all of them have some restrictions (depending always in data header taps data introduction or saving the exchange rate properly in MM TABLES but not in FI TABLES).
    I would really appreciate if anyone could help with this, ensuring that the Badi get's always the data and makes it work with no screen selection dependance.
    Thanks in advance.

    Dear All,
    I have found the solution with the help of ABAPer. The system has a bug for which SAP has given a  Sap Note no 22781.
    Actually what happened in the Invoice is, the system by default fetched the exchange rate for the Exchange Rate Type 'M' for the rate last maintained. Since we were using different Exchange rate it did not match. Also we came to know about the difference only because off-late the users had stopped updating Exchange Rate 'M' .
    The funny part is in the Invoice if we click on each tab at the header and come back to the first tab where we find the Exchange rate for accounting, the system picks up the actually rate as per the Exchange Rate maintained.
    Regards,
    Karthik.

  • Exchange rate date

    Hello everyone,
    What is the use of Exchange Rate Date field in CRM orders?
    As far as I know, we don't have this field in R/3. When we change the pricing date the exchange rate is automatically redetermined according to the new field.
    But this is not the case in CRM. When we change the pricing date, the exchange rate date and the exchange rate stays the same.
    We tried to manipulate the field with the badi CRM_PRICING_BADI when the pricing date changes, but the system didn't let us.
    Do you know how this field is used and how can it be changed during order creation?
    Regards.

    Hi
    Did you find a solution? We have the same issue in our system.
    Thanks a lot
    Stephanie

  • Pulling of Exchange Rate data from ECC to BI

    Hi All,
    we are having an requirement to pull TCURR Table Exchange Rate data from ECC to BI.
    If anybody worked on this scenario could you please share valuable inputs regarding this.
    I gone through this  SDN forum link: Re: Automated Exchange Rate Loading in BPC NW ( please share some more details regarding this )
    Regards
    Amit

    Hi All,
    I hope this will help you to pull Exchange rate data from ECC Table : TCURR  to SAP BI System.
    ECC Steps : Creation of generic datasource
    1) Create generic Transaction Data source Using TCode : RSO2 with name ZTCURR and then press create Button.
    2) Input Applic. Component:  FI-GL and give description.
    3) Input View/Table: TCURR and Press save Button.
    4) This will take you to extract structure of data source ZTCURR. In this structure select respective field from the selection field option (In future we will use it in BI info package) and then press save button.
    5) Use Tcode:  RSA3 to check the data by giving custom data source ZTCURR name.
    Note:In this case we are extracting full data from TCURR table. If your project demands you can use delta specific field.
    SAP BI 7 Steps
    1) Go to BI system, TCode: RSA1--> Source System-> Replicate metadata, then you can see generic data source "ZTCURR" in your BI data source tree.
    2) Maintain Info cube Structure same like table : TCURR, 
    ECC Field      ECC DATA TYPE                               BI Field     BI Data Type
    KURST     CHAR                          -
      >                 ZKURST     CHAR (Length 4)
    FCURR     CUKY                          -
      >          ZFCURR     CHAR (Length 5)
    TCURR     CUKY                          -
      >          ZTCURR     CHAR (Length 5)
    GDATU     CHAR                          -
      >          ZGDAT       CHAR (Length 8)
    UKURS     DEC                             -
      >          ZUKURS     NUMBER ( Key Figure )
    FFACT     DEC                             -
      >          ZFFACT     NUMBER ( Key Figure )
    TFACT     DEC                             -
      >          ZTFACT     NUMBER ( Key Figure )
    =========================================================================================
    3) Conversion of default format "YYYY/MM/DD" to "YYYYMMDD".
    In Transformation: "GDATU" is number format, not date format, so we need to write start routine in transformation.
    With the Help of below code you can convert default format
    "YYYY/MM/DD" to "YYYYMMDD".
    DATA: DATE      TYPE CHAR10,
              L_INDEX   TYPE SY-INDEX.
      LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
        L_INDEX = SY-TABIX.
        CALL FUNCTION 'CONVERSION_EXIT_INVDT_OUTPUT'
          EXPORTING
            INPUT  = <SOURCE_FIELDS>-GDATU
          IMPORTING
            OUTPUT = DATE.
        CONCATENATE DATE+6(4)
                    DATE+3(2)
                    DATE+0(2)
        INTO <SOURCE_FIELDS>-GDATU.
        MODIFY SOURCE_PACKAGE FROM <SOURCE_FIELDS> INDEX L_INDEX TRANSPORTING GDATU.
    ENDLOOP.                    
    Note : Customize above ABAP code according to your client requirement.
    ==============================================================================================                    
    4) Calculation of Month End Rate----> Means last working day of month
    Please refer below solution  ( sent on 3rd June 2011 )  to calculate Month Rate
    Go to BI transformation and write formula in ZGDAT field. In this case add GDATU as source field of rule and write below formula.
    *Last working day of month Formula *    :             LAST_WORKINGDAY_MONTH( GDATU, '' )
    Last working day is calculated  based on the data maintained in the ECC TCODE : SCAL ( SAP Calendar )
    ==============================================================================================
    5)  CALMONTH calculation:  conversion of YYYYDDMM format   to YYYYMM format.
    This below given ABAP code helps you to convert GADTU: YYYYDDMM format   to CALMONTH : YYYYMM format.
    In BI transformation write field routine in CALMONTH field  to display  date in this YYYYMM format.
    DATA : L_GDATU TYPE tys_SC_1-GDATU.
    CLEAR L_GDATU.
    CONCATENATE SOURCE_FIELDS-GDATU0(4) SOURCE_FIELDS-GDATU4(2)
                INTO L_GDATU.
    RESULT = L_GDATU.                      
    Regards
    Amit
    Edited by: amit_sap_n on Jul 20, 2011 1:54 PM

  • OTO information not complete for non ABAP instance of system &1 in SMSY

    Hello,
    We have just applied Stack 23 and stack 24 to our Solution Manager system.  When we are executing action System Logon from  a ticket we are getting the following error:
    OTO information not complete for non ABAP instance of system &1 in SMSY
    We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
    We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
    We appreciate your help.
    Regards
    Esteban Hartzstein

    Hello,
    We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message  of "OTO information is not complete ....
    We have updated as suggested the info regarding the system in the SMSY.  We have read the Remote System Data.
    We will run SOLMAN_SETUP again to review the setup, and then test again
    We appreciate also if you provide any additional input.
    Regards
    Esteban Hartzstein

  • Excise tab not appearing for non cenvatable po

    Hi All,
            while doing MIGO , the excise TAB is appearing for cenvatable items.
    but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
    i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
    If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
    pl guide
    regards

    thanks,
          I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
    the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
    Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
    pl reply
    regards

  • In the packing list, batch number and expiry date is not appearing for a ma

    Dear Friends,
    I have an issue in the packinglist.
    In the packing list, batch number and expiry date is not appearing for a material.
    But in the delivery the batch number and expiry date is appearing.
    Why this has triggered and how to solve this?
    With regards

    Hi Vamsi,
              Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
    Regard's
    Murali.

Maybe you are looking for

  • Watch iphone videos on a Macbook Pro

    I can't figure ot how to do this.  It's probably a simply procedure but I am brain dead. Help appreciated.  Anyone?  Anyone?

  • In Logic Pro 9.8.1 I get an "error while trying to sync Audio and MIDI"

    I am using a MAC OS X 2.66 GHz Intel Core 2 Duo and memory 4 GB 1067 MHz DDR3. I am going thru an Apogee Ensemble and 2 other external units, an MCU Pro Universal Control surface and an Axiom 25.   The problem is this was working fine and now I canno

  • Creating DVD movies from divx and srt subs...

    Hi people! Just want to create a dvd movie with a divx movie and the subtitles in srt file format i downloaded,so to play it on my dvd player... I suppose i must convert the movie first but i don't know to what format,with what program and the comman

  • Torch dropped in water

    I have never dropped my Torch 9800 before in the over 2 years I have had it but when I finally did it was in the toilet.  I immediately took out battery, sim and blotted with a soft  paper towel.  Within 30 mins I immersed it in rice.  The moisture i

  • Overriding an enum type?

    Hi Java experts, I would appreciate some help about a small problem I have with some java code of my own. I'm using Java 1.5. I currently have written a class that takes a filename and extract records from a corresponding binary file. The structure o