Exchange Rate Difference Error
Hi,
While posting payment through F-58, we are getting below error :
Ex.rate diff.accts are incomplete for account 0010500400 currency INR
Message no. F5063
Diagnosis
The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
System Response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
Proceed
However, all the necessary settings are made in KDF & KDB. Here we are processing payment for local vendor & the PO, GR, IR is done in INR then at the time of processing payment its giving above mentioned error. We are unable to understand that why system is asking for exchange rate difference account. Please suggest as the issue is urgent.
Regards,
Varsha
Hi Varsha,
As the message mentioned in detail, please check your configuration in tcode OBA1 again.
For Transaction type KDF, you double click to your GL account, and maintain the Valuation loss/gain, balance sheet adjustment in there.
For your ref:
You can read more information about this error in SAP note 12962 - Clearing Foreign Currency Items
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D313239363226
Regards,
Julie
Similar Messages
-
Exchange rate difference in f-03
Hi all
pl. help me. I am not able to clear open item in f-03 which is maintained in BRL. I am posting payment in usd. the error reads:
Ex.rate diff.accts are incomplete
Diagnosis
The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
System response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
I have called transaction OBA1, and entered the GL a/c and currency BRL. Even i cannot save it says
"Enter line items first or choose open items"
pl reply friends urgently
Thks
umaHi Uma,
Exchange Rate has been defined both the end. Like INR = USD and USD = INR.
Here you are not yet defined GL account for Exchange Rate Difference account (Gain or Loss).
T.Code OB09 Define G/L , Currency and Currency Type.
Before that you would have the GL account please create in FS00.
Hope it will help you.
Regards,
Sivakumar Sathiyamoorthy
+919916131375 -
Exchange rate difference KDM in MIRO - cost center used
We have recently testing to setup KDM Exchange rate difference posting in LIV and encounter the problem of cost center cannot be determine for PO with account assignment A (For asset) and P (for Project).
The question is how does the system determine the cost center for the exchange rate different account? It doesn't take the default cost center from the configuration in OKB9 but extract the cost center from PO Account Assignment - for Asset Account assignment, there is no cost center in PO and thus it is giving a error of 'Field Cost Ctr is a required field....'
Any help appreciated.Dear Murali: Yes, GL account is maintained in OBYC for KDM transaction, I am following the OSS note 980402 for the setup (ECC6 system). The GL account say is 60000005. In OB09, we have maintained the entry for this account 60000005 to have a default cost center (e.g. 1000). This cost center does not get defaulted when MIRO posting is done with exchange rate difference. Instead, the cost center is obtained from the PO (e.g. the account assignment in PO have cost center 5000). But for certain account assignment (e.g. 'P' for WBS and 'A' for Asset), there is no cost center maintained in PO account assignment and thus in MIRO i get an error message as mentioned above.
Dear SAPFICO: check the asset master also, althrough there is a cost center in Asset Master, it does not get extracted into MIRO postings. -
Exchange rate difference in MIGO and MIRO
Dear Experts,
Our local currency is INR.
We have created PO and MIGO on 31.03.2015 with exchange rate 62.5908 without tick on fixed exchange rate in PO. OB08 is also same on 31.03.2015. But at the time of MIRO system showing error massage for configure KDM even if i put exchange rate manually (62.5908) in MIRO.
GR/IR Dr 62.5908
To Vendor NIL
Total 63.5908
I have also made down payment to this in UDS
Local Curr(INR)
Doc. Curr (USD)
Ex. Rate
PO No.
32,081,541.24
505,002.42
63.52750
5500200091
93,721,425.00
1,494,998.00
62.69000
Please advice how can i debug exchange rate 63.5908. if i assign GL on KDM then system will debit this difference in that GL
Thanks in advance. Your suggestions will be highly appreciated.
Best Regards,Hi Monika
Please also exchange how you have set up the treatment of exchange rate differences for your company code for LIV under the path:
IMG>Materials Management>Logistics Invoice verification> Incoming Invoice>Configure how exchange rate differences are treated
Check if you have N or X maintained here. If you have any of this config, you will need to maintain the GL Account in KDM as well
Regards
Sanil Bhandari -
Exchange Rate Difference Accounts are Incomplete
There's a situation where the user is trying to clear the transaction using F-04 for clearing outgoing checks account in CAD. however the system gives a message "Ex rate diff. accts are incomplete for account 1100000 currency CAD".
This situation exists only in Production and not in QA or DEV. However, there is no configuration change between PRD & QA,
There is account configured for ExchagenRate difference realized in OBA1 for the reconciliation account 2100000, same as in QA and DEV. not able to figure out where is the issue.Hello
As per the message you need to maintain the exchange rate differences for th account 1100000.
if there is no exchange rate difference then system wont give that error message, in quality and development exchange rates are not maintained daily thatu2019s the reason it wont give the error message
please maintain the exchange rate accounts for the account either with currency CAD or without any currency will resolve the issue
Thanks
Kameshwar Rao -
Exchange rate differences posting failed due to manual journal entries
when i run exchange rate differences and try to post the result, system shows "No matching recording found 'journal entry' (OJDT) (ODBC-2028) [message 131-183]" at the bottom panel ane the posting was failed. then i found the problem is actually from manual journal entries made to a business partner. as long as i deselect the manual journal entries, the posting was successfully done.
i am using B1 2007B with pl09. is this standard in B1 2007B that exchange rate differences posting does not work with manual journal entries of BP?you are right! it is a bug in 2007B.
The posting has no problem if the base reference number is same as the transaction number in the manual JE document. however, if we define a numbering series which is different from the transaction serial number, then we have problem with the posting. System searchs for the JE records by using base reference number as transaction number. That is why it could not find the JE document and then report the error message.
so, where should i post the bug to SAP and let them fix the bug as soon as possible?
thanks for the help! -
Exchange rate difference not going to the correct GL account
Hello,
In the transaction OB09, I have given the GL account 702000 for exchange rate difference realized loss and gain.
I have also maintained the exchange rates in the transaction OB08.
In transaction F-44(clear vendor), I give the foreign curreny(EUR) in the entry screen. When I do a charge off difference, however, I need to enter the amount in local currency(USD) because our bank operates in the local currency. When I do a document simulate, it puts the exchange rate difference into another GL account (703030 - that we have defined for unauthorized deductions) and not the one defined for the exchange rate difference(702000). This does not happen if I enter the amount also in the foreign currency.
Could anyone tell me the reason for this and the correction measures.
Any helpful suggestion will be greatly appreciated.
Thanks,
Rugmani
Edited by: Rugmani Rajan on Aug 27, 2008 11:35 AMHello,
The original problem is resolved. The current exchange rate was not getting uploaded to the system and as a result, the old exchange rate was being used. So it was putting the difference into the other account.
That has given rise to another problem. We use the TBEX to upload exchange rates from a centrally maintained spreadsheet. The upload is giving the following errors:
Securities master data EUR do not exist!
Interest rate master data CNY is missing
Suggestions and correction measures will be greatly appreciated.
Thanks,
Rugmani -
Exchange rate differences posted when clearing but not FAGL_FC_VAL
Hello,
I need to configure accounts for exchange rate differences for clearing, but I if I configure just "account for Realized Exchange Rate Losses" and not " Account for Loss from Valuationu201D in OBA1, the account is selected in month end valuation ( FAGL_FC_VAL) and I do not want it because it ends on error.
Do you know how to cover this requirement?
CheersHi,
You can exclude the account in the the forex reval run by excluding the GL account by specifiying the account in the variant used for period end processing.
Or you can use valuation area for period end processing in FAGL_FC_VAL and configure based on which the account if not maintained in the valuation area would not post.
Regards
K.R -
Automatic posting accounts for exchange rate difference.
Guys,
My clients wants to write a check in GBP pound sterling, and for that I set up house bank for GBP and did all the other configuration steps in FBZP.We successfully printed out the check thru F110.Now when we try to mark the check as "encashed" thru FCHR,The log says 1 check selected and marked as encashed but no posting docunments get generated as system shows an errored out session,I looked into SM35,the job log says" exchange rate difference accounts are incomplete for acount 161511 currency GBP".System takes me to OB09 which is account determination for Ol Exch.rate differences.Should I update a/c 161511 here? Please note account 161511 is not a foreign currrency account.Its main cash bank account(US$ account) which I set up in House bank FI12.So in OB09 I dont see that account 161511.Wht should I do ?System also takes me to OBA1-maintain FI configuration Automatic posting. DO I need to do something in here too ? Please advice.Thanks
Regards
IqtidarIn OBA1 > Exchange Rate Dif.: Open Items/GL Acct
Check the example below.
Chart of Accounts xxxx
G/L Account < GBP A/C from which you are paying >
Ex Rate Realized
Loss P&L - Ex Loss Realized A/c < 830301>
Gain P&L - Ex Gain A/c Realized <720201>
Valuation
Val.loss 1 P&L - Ex Loss Unrealized A/c < 830302>
Val.gain 1 P&L - Ex Gain A/c Unrealized <720202>
Bal.sheet adj.1 For. Currecy Reserve < 520501>
Translation (similar to valuation)
Loss 830302
Bal.sheet adj.loss 520501
Gain 720202
Bal.sheet adj.gain 520501
Is this what you were after? The logic behind different GL postings should be able to explained by a person with an accounting background. Do let me know if you have any specific questions.
Nadini -
Exchange rate difference between MIRO and GR/IR
Hi,
Exchange rate difference between MIRO and GR/IR we need to written off as a expense for imported w/off expense and in case of assets we need to post exchange rate difference to exchange fluctuation account. Currently exchange rate difference is accounting under capital work in progress(Asset)instead of exchange fluctuation.
Thanks in Advance
Regards
Venkata SureshHi,
At MIRO stage, after entering PO number system will automatically populate the GRN value for selection. Here if you found that invoice value, which you have received from the vendor, is more than the system proposed amount, then you can adjust that diff amount in the GL account tab, which is next to PO reference tab in MIRO.
There enter the exch loss GL account and enter the diff amount.
Thanks,
Srinu. -
SGD Exchange Rate Difference JE appears in Customer Aging Report
Dear Experts,
SAP Version: 8.81
Local Currency: SGD
We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
Next, we go to Customer Aging Report and select this USD BP.
When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
Above is the behaviour in 881.
Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
What is your opinion about the behavior in 881? Will you consider it as design or issue?
Thanks.
Regards,
Lay ChinDear all,
This problem is no longer there when upgrade to 881 Patch 08.
Regards,
Lay Chin -
Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference
Hi Gurus,
We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
1)
G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
Posting:
Service A/C.....100 USD (Rs. 4900)
To SR/IR Clearing A/C...100 USD (Rs. 4900)
2)
MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
Posting:
SR/IR Clearing A/C......100 USD (Rs. 4900)
To Vendor A/C...........90 USD (Rs. 4320)
To TDS A/C..............10 USD (Rs. 480)
To Exch. Difference A/C. 0 USD (Rs. 100)
This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
3)
Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
Vendor A/C......90 USD (Rs. 4320)
TDS A/C.........10 USD (Rs. 480)
To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
4)
Now when we try to post MIRO again, it is posting the following entry:
SR/IR Clearing A/C......97.96 USD (Rs. 4800)
Exch. Difference A/C.....2.04 USD (Rs. 0)
To Vendor A/C........... 85 USD (Rs. 4080)
To TDS1 A/C............. 10 USD (Rs. 480)
To TDS2 A/C............. 5 USD (Rs. 240)
This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e. 4800 / 49).
Please help.
Thanks!
Regards,
Angad NagpalSolved.
The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
Thanks!
Regards,
Angad Nagpal -
Exchange rate difference not getting posted to KDM account during MIGO/MIRO
Hello Gurus,
I have a purchase order with many line items. For some of the line items, the exchagne rate difference between the date of MIGO and the date of MIGO is taken to the KDM account. But for some other line items, it is not being taken the KDM. For such line items, the value of the GR/IR account in the local currency is different from MIGO to MIRO. Due to this, the GR/IR clearing is not happening automatically.
Do you have any idea, why the system is not taking the different to KDM for some line items and taking it correctly to KDM for others.
The only difference that I noticed between these 2 line items was
In case where the KDM account is determined, the GR was done for only one line item
In case where the KDM was not determined, the GR was done for more than one line item.
Thanks in advance for your replies
Thanks and Regards
VenkateshHi Venkatesh,
I suspect that in your system may be the setting in OMRW is not activated. If the CCurr indicator is not activated for respective company code. Please refer to the information from note 980402 :
After you implement this note, you can use Customizing transaction OMRW to make settings for the new logic for each company code and each currency (the first local currency and two other material ledger currencies, if the material ledger is active). If the CCCurr indicator (V_169P_PK-KDHW) is set, this activates a new logic for calculating the exchange rate difference (KDM amount) in the company code currency (first local currency). As a result, the system also generates KDM lines for purchase orders with account assignment and for purchase orders with MAP materials in inventory management and in invoice verification if required. If the material ledger (ML) is active, you can set a corresponding indicator for additional ML currencies.Bear in mind that the system performs a 1:1 cancellation for the KDM line in the cancellation transactions.
If the indicator is not activated, then the new logic for calculating the exchange rate difference is not active.
I hope this helps.
Regards
Ravinagh Boni -
Unexplained exchange rate difference
We have created a delivery plan in USD (our local currency is EUR) without fixing exchange rate. This plan has a received several GR and IV at different rates. The material is valuated at standar value.
D.Plan: Rate A , price 15,96 USD/UN
month 1 - GR and IV at rate B
month 2 - GR and IV at rate C
month 3 - GR and IV at rate D
All invoices are posted at a price of 14,32 USD.
In month 1 we had price difference due to differences with the standard price. That was correct.
In month 2 the system has posted unexpected exchange rate differences (key DM). We don't understand them as fas as GR and IV were posted at the same rate.
Could it be that the system is using the rate of the first IV? We wonder the way SAP is calculating that exchange rate difference?no replies
-
MIGO exchange rate difference incorrectly.
In transaction MIGO exchange rate difference lines are generated for planned delivery costs. In some cases we found the difference exchange rate comes from the exchange rate of the purchase order, and other times we cannot find where the difference comes from. Both cases are incorrect.
Note 1278540 has already been inplemented.
Any idea?
Thanks,
Ceciliahi,
If you make the exchange rate as Fixed via using the indicator in the PO header, then system will take this while GR and IR....if not maintained, then system will take from EKAB table...
Regards
Priyanka.P
Maybe you are looking for
-
FCP/ProApps/Finder Crashing, FCP or OS problem?
Of recent, I've been having countless amounts of problems with my Mac Pro 2x3ghz Dual Core Intel Xeon OSX10.6.8. Yesterday I wiped the hard drive, reinstalled the OS and fcp. It was working ok for a bit, but it is starting to hang and crash again. So
-
I need to be able to print the filled in form as it appears as a form.
Currently when I attempt to print a reponse as a PDF a four page form turns into an unmanageable 27 page PDF file. Is this a bug or do I need to make a change?
-
I did have a previous version of Itunes and Quicktime that I used the control panel Uninstall to remove. When I do the download, I get a small window in the upper left saying Internet Explorer Cannot Display Webpage. It is trying to get to ....itunes
-
Broadband Speed slowed to a crawl all of a sudden
Hi, My broadband speed is currently 0.04mbps according to speedtest.net, I have been unable to complete the BT speed test because it is so slow, I get the following error: "We haven't been able to complete the speed test at this time. This may be due
-
hi i want to put some default vales in pa30. how it is possible regards, ashwin