Exchange rate difference posted to Group currency only during MIRO

Hi SAP Gurus,
We're activating parallel currency in ML and USD is the group currency. GR/IR clearing acct is managed in local currency only.
OB22
Crcy Type  30    Group currency                               Currency   USD
Valuation        Legal Valuation
ER Type    M     Standard translation at average rate
Srce curr. 1     Translation taking transaction currency as a basis
TrsDte typ 3     Translation date
Please find below scenario:
Co code currency: ZAR
PO: ZAR
Upon GR:
Posting date- 04/14/2009 exch. rate 1ZAR= 0.11099 USD
Entry: debit Expense - 4,078.19 ZAR/ 452.64 USD
          credit GR/IR acct -   4,078.19 ZAR/ 452.64 USD
Upon IR:
Posting date- 04/20/2009 exch. rate 1 ZAR= 0.11279 USD
Entry: debit GR/IR acct - 4,078.19 ZAR/ 452.64 USD
          credit Vendor acct - 4,078.19 ZAR/ 460.02 USD
automatic additional debit Expense - 0.00 ZAR/ 7.38 USD
Here are my questions:
1.) Where would I check the setting for the GL account used in the automatic line entry posted in group currency during IR? (3rd line item above)
2.) Can this be changed? Say instead of the original acct assignment, the management want to change it to FX gain/loss account
3.) How?
I have checked several notes (331910,etc) but I can't seem to find the answers to my questions.
Appreciate your help. Thanks!
Regards
Dru

Just an update to this issue- I just found out that the system is pointing to KBS when posting the
exchange rate difference in group currency upon IR, hence, PO account
assignment is adopted. I'd like to rephrase my question- is there any
way we can change SAP behaviour such that it will point to other
transaction key (e.g. KDG) other than KDM? Bottomline is we want it
charged to other GL account not the one in the PO.
Thanks so much for your assistance.
Regards,
Dru

Similar Messages

  • Exchange rate difference posting in parallel currencies

    Hello experts,,
    We are on ECC 6.
    When we enter an invoice with MIRO and the current exchange rate differs from that in the PO, the exchange rate differences in local currency and in parallel currency (group currency) post to different accounts.
    Is this a standard feature / behavior? If so, where can i find the settings.
    Shouldn't the postings in all currencies (except doc currency), in the event of exchange rate difference post to the same account?
    The material ledger is not active.
    We have maintained 3 different currencies.
    Example to illustrate -
    DC = JPY
    LC = SGD
    GC = USD
    PO for asset.
    PO value = 10000 JPY
    Ex rate not fixed in the PO.
    Ex rate at PO -
    100 JPY = 1.6 SGD
    100 JPY =  0.85 USD
    Ex Rate at IR
    100 JPY = 1.7 SGD
    100 JPY =  0.9 USD
    When IR is entered,
    The exchange rate difference of 10 SGD (@ 0.1 per 100 JPY) is posted to the asset. No posting in USD (though there is a balance of 5 USD).
    At clearing (Transaction FB1S - GL account clearing) the exchange rate difference (in GC only, because no balance in LC) of 5 USD (@ 0.05 per 100 JPY) is posted to the Exch. rate difference GL acct.
    Thanks in advance for your advice/solution.
    B. Regards,
    Halaswamy

    Hi,
    Check in t.code: OB22. the 'source currency' used for translation in . There are two options:
    1     Translation taking transaction currency as a basis
    2     Translation taking first local currency as a basis
    Also check the notes:
    335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy
    526623 Different treatment of local and parallel currency in ML
    Regards,
    Biju K

  • Exchange rate difference posted to document currency instead of local

    Dear Gurus,
    When I post in MIRO (invoice receipt) for a Service Order, there is exchange rate difference. But instead of posting the exchange difference to local currency (SGD), the system is posting the rate difference to document currency (USD). The SO is created for a asset.
    Kindly assist me on how I can post the difference to the local currency.
    Thank you.

    I found out that the user did an invoice verification using MIRO. So the posting was debit vendor acct, credit GR and credit asset. But after this the user did a reverse (MR8M). The reversal was only done for the invoice the asset posting was not reversed by MR8M. So when the user posted the invoice again in MIRO, the system tried to debit vendor, credit GR & debit asset.
    Kindly enlighten me on why this is happening & what I need to do in order to post the invoice again so that the system debit vendor acct, credit GR and credit asset.
    Thank you.

  • Exchange Rate difference posting during MIRO posting

    Hi ,
    We are facing an issue for exchange rate difference posting during MIRO.
    PO creation , GR posting & IR posting done on same date. Vendor in PO has different currency than company code currency. Exchange rate maintained in OB08 for this period is taken in PO.
    PO value & GR value is same. Due to raw material cost there was price difference posted during GR posting.
    (i.e. Raw material cost - GR/IR value = Price difference amount)
    During posting MIGO, 3 accounts got posted.
    Raw material cost account got debited & offset credit to GR/IR account & price difference account (in vendor & company code currency also)
    During posting MIRO, 4 accounts got posted.
    Vendor account got credited with GR/IR amount & offset to GR/IR account debit.
    Exchange rate difference account got credited & offset to price difference account (in company code currency only)
    Since PO creation , GR posting & IR posting done on same date, then why system has posted exchange rate difference account in local currency only during MIRO posting ?
    Your inputs appreciated.
    Thanks & Regards

    Hi,
    there is a setting in configuration of logistics invoice verification where you can control the calculation and posting of exchange rate differences. If you had the setting active that exchange rate differences are calculated against a planned exchange rate, that might lead to the kind of postings you describe. Please check.
    best regards,   Udo

  • Exchange rate difference posting deactivate in MIRO

    Hi
    Exchange rate difference posting is active, I do not want
    to post to this account, How to deactivate this.
    Shoudl i change in the config under invoice verification - How to treat exchange rate diff ? will it create any other problem ?
    Pl Suggest.
    RRS.

    Dear RRS,
    Please note following things
    To enter invoice in foreign currency following settings must be done in SAP  system.
    1. You must have defined  the currency you are using to enter the invoice
    2) You must configure an exchange rate of foreign currency & local currency in customization
    3) You can define diffrent rate for diffrent time  period
    For a PO in foreign currency you can decide whether the rate from the PO to convert the foreign currency to the local currency at GR or IV.
    If you fix exchage rate in PO then you can change it at GR or IV.
    If the exchange rate is not fixed the system uses  the current exchange rate at GR.In IV the system also suggest the current exchange rate as exchange factor but you can change it.
    Reward if useful,
    Vivek Maitra

  • Exchange rate differences posting failed due to manual journal entries

    when i run exchange rate differences and try to post the result, system shows "No matching recording found 'journal entry' (OJDT) (ODBC-2028) [message 131-183]" at the bottom panel ane the posting was failed. then i found the problem is actually from manual journal entries made to a business partner. as long as i deselect the manual journal entries, the posting was successfully done.
    i am using B1 2007B with pl09. is this standard in B1 2007B that exchange rate differences posting does not work with manual journal entries of BP?

    you are right! it is a bug in 2007B.
    The posting has no problem if the base reference number is same as the transaction number in the manual JE document. however, if we define a numbering series which is different from the transaction serial number, then we have problem with the posting. System searchs for the JE records by using base reference number as transaction number. That is why it could not find the JE document and then report the error message.
    so, where should i post the bug to SAP and let them fix the bug as soon as possible?
    thanks for the help!

  • Avoid posting of realized exchange rate differences in 2nd local currency

    Dear SAP fans,
    The situation here in our company is that a company code is set up with NZD as 1st and EUR as 2nd local currency (currency type 30 "Group currency" for EC-CS consolidation).
    Therefore, all postings (and balances) are also translated and saved in EUR (with the current exchange rate).
    We now have an open item managed G/L account for prepaid expenses, which is used to collect postings which are then cleared later. It's however no payable/receivable account for vendors/customers. Therefore, it doesn't make sense to post realized exchange rate differences when clearing this account. This is however what SAP wants to do when we try to clear it.
    For example, if I post today 100 NZD and two months later again 100 NZD to this account. If the NZD vs. EUR exchange rate changed in the meantime, then SAP won't let me clear this account without posting realized exchange rate differences, which makes however no sense.
    Does anyone of you meet this problem before? Could you please give me a hint?
    I thought about setting the "Only balances in local currency" indicator in the G/L account master but this helps only for differences between local and document currency (and not for differences in 1st and 2nd local currency).
    Any help is highly appreciated!
    Thanks and best regards,
    Peter

    Dear Padma,
    Thanks for your answer. The customizing activities you mentioned are already set up in the system. This is not our problem.
    The problem is however, that we don't want SAP to post automatically realized exchange rate differences between 1st and 2nd local currency as this doesn't make sense in this business case.
    It's about an open item managed G/L account which is used to collect posting which are later cleared. It's not a payable/receivable account for customers/vendors where the posting of realized exchange rate differences makes sense.
    We've thought about several solution which unfortunately all didn't help us:
    - Don't setup realized exchange rate differences accounts or set them up only for group currency (in OB09)
    - Set indicator "Only balances in local currency" in G/L master data
    Best regards,
    Peter

  • Exchange Rate Difference Posting

    Dear Gurus,
    I am facing atypical scenario in Production and development Clients.While clearing open items for a BanlK GL (USD Currency) in production there is no exchange differences being calculated by the syste.There is difference in Exchange rates between the original document and the clearing document.
    But for the same GL in Development I am getting Posting to Account maintained in KDB Key.
    I would like to know what can lead to difference in scenario that in one case system is calculating difference and posting and in the other case no.
    Please help.
    Regards
    Raju

    Dear All,
    Let me elaborate the scenarion in more deatil:
    We post Foreign Currency Invoice LIV--MIRO say rate is 41 USD/INR
    For payment F110 No Exg rate differences is selected in FBZP--So no Exchange Rate Difference is posted for payment.
    Now for clearing the bank Sub account Entry posted by APP user input LIV Exg rate in past and systen allowed to clear with no Exg rate Differ.This is OK.
    Now when user try to clear same account with same entry system is issue msg like No Exg Rate diss account maned.I tried to clear th GL document with both LIV and APP exchage rate its strange that is each case system expects Exchange rate diff account.
    I maintained in FBKP KDB in development client but then Exg Rate diff is getting posted which is not the requirement.
    Can any body please help.
    Regards
    Raju

  • Exchange rate differences posted when clearing but not  FAGL_FC_VAL

    Hello,
    I need to configure accounts for exchange rate differences for clearing, but I if I configure just "account for Realized Exchange Rate Losses" and not " Account for Loss from Valuationu201D in OBA1, the account is selected in month end valuation ( FAGL_FC_VAL) and I do not want it because it ends on error.
    Do you know how to cover this requirement?
    Cheers

    Hi,
    You can exclude the account in the the forex reval run by excluding the GL account by specifiying the account in the variant used for period end processing.
    Or you can use valuation area for period end processing in FAGL_FC_VAL and configure based on which the account if not maintained in the valuation area would not post.
    Regards
    K.R

  • Addl LC Activated, No Exchange Rate Differences Posting on AP Invoice

    We set up a new Company Code for India.  The CoCode is configured as USD.  We have configured INR as an Additional Local Currency (LC2) for statutory reporting.  The INR is configured as 'Hard Currency'.
    Since going live, we've come to learn that paying USD invoices is not generating INR exchange gains/losses with changes in exchange rate between INR and USD.  When I look at a clearing document, both lines are posted at the historical invoice exchange rate.
    For the statutory accounting to be correct, I would have expected the AP payment document to clean the vendor line at the invoice exchange rate and the offset line to post at the current exchange rate.  I would have then expected a third line to the payment document with the offset to exchange gain/loss.  The exchange gain/loss line would post with a USD amount zero with an INR amount in the Hard Currency/LC2 field.
    I believe the Open Item configuration (TransCode OBA1, KDF item) is correct.  The Currency Type is 'BLANK'; therefore, good for all Currency Types including the Hard Currency.
    I can't figure out what the heck I'm missing!  Anyone have any idea why the clearing AP invoice is not generating the exchange gains/losses as expected?
    Thanks in advance for any assistance!

    Gordon,
    When you say
    "With this version, you probably have very few options"
    Does this mean with SAP B1 2007 the same problems are not there.
    Please say its so and i'll upgrade immediately as I'm experiencing the same problem as the one described above by Claudio
    We use one exchange rate per month. We have BP accounts whose currency is Multi Currency this is where the customer would pay either in LC (KES) or SC (USD).
    The problem occurs when running conversion differences, the journal entry to the unrealized exchange gain\loss is one-sided i.e. only the SC currency is posted.
    This leads to both the P&L and the Trial balances being wrong.
    Thanks in advance for any assistance
    Regards,
    Michael Mbiyu Itotia

  • Posting of Exchange rate differences in parallel currencies

    Hello experts,,
    We are on ECC 6.
    When we enter an incoming invoice with MIRO and the current exchange rate differs from that in the PO, the exchange rate differences in local currency and in parallel currency (group currency) post to different accounts.
    Is this a standard feature / behavior? If so, where can i find the settings.
    Shouldn't the postings in all currencies (except doc currency), in the event of exchange rate difference post to the same account?
    The material ledger is not active.
    We have maintained a local currency and a group currency.
    Example to illustrate my issue -
    DC = JPY
    LC = SGD
    GC = USD
    PO for asset.
    PO value = 100000 JPY
    Ex rate not fixed in the PO.
    Ex rate at PO -
    100 JPY = 1.6 SGD
    100 JPY =  0.85 USD
    Ex Rate at IR
    100 JPY = 1.7 SGD
    100 JPY =  0.9 USD
    When IR is entered,
    The exchange rate difference of 100 SGD (@ 0.1 per 100 JPY) is posted to the asset. No posting in USD (though there is a balance of 50 USD).
    At clearing (Transaction FB1S - GL account clearing) the exchange rate difference (in GC only, because no balance in LC) of 50 USD (@ 0.05 per 100 JPY) is posted to the Exch. rate difference GL acct.
    Thanks in advance for your advice/solution.
    B. Regards,
    Halaswamy

    Hello,
    1.  You have to assign Forex GL's for the reconciliation accounts in OB09.
    2.  At the time of payment for incoming invoices, system can read the valuation differences and it will post to Realized Gain/Loss accounts and B/S adjustment account.
    3. You can consider this amount to issue bonus to your customers.
    Rgds
    Murali. N

  • Post exchange rate differences to separate account on invoice verification

    Dear expert,
    I'm facing a problem and need your guidance related to exchange rate differences between Goods Receipt and Invoice verification caused by time differences
    My company buy an asset using purchase order with account assignment.
    As an example:
      Asset price on PO      : 100 USD
    On Good receipt (Exchange rate 1 USD = 9,000 Rp)
    Journal created
      Asset                             900,000 Rp
         GR/IR Clearing                900,000 Rp
    On Invoice verification (Exchange rate 1 USD = 10,000 Rp)
    Journal created
    GR/IR Clearing                  900,000 Rp
    Asset                               100,000 Rp  (Exchange rate differences)
        Vendor                             1,000,000 Rp
    My Company wants to put "Exchange rate differences" into separate account (Gain/Loss realized account) instead throw it on asset because asset value would be change. How make it happend?
    I already try to configure KDM (Exchange rate differences) and OB09 and still exchange rate differences posted into asset

    Hi,
    Check config in transaction code Oba1 and Obyc. check posting G/L account of PO (KBS), n try to change in KDR Class.
    Regards
    Sanjeet Kumar

  • Exchange rate difference in f-03

    Hi all
    pl. help me. I am not able to clear open item in f-03 which is maintained in BRL.  I am posting payment in usd. the error reads:
    Ex.rate diff.accts are incomplete
    Diagnosis
    The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
    System response
    The system cannot generate the exchange rate difference posting.
    Procedure
    By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards. 
    I have called transaction OBA1, and entered the GL a/c and currency BRL.  Even i cannot save it says
    "Enter line items first or choose open items"
    pl reply friends urgently
    Thks
    uma

    Hi Uma,
    Exchange Rate has been defined both the end. Like INR = USD and USD = INR.
    Here you are not yet defined GL account for Exchange Rate Difference account (Gain or Loss).
    T.Code OB09 Define G/L , Currency and Currency Type.
    Before that you would have the GL account please create in FS00.
    Hope it will help you.
    Regards,
    Sivakumar Sathiyamoorthy
    +919916131375

  • Exchange Rate Difference Error

    Hi,
    While posting payment through F-58, we are getting below error :
    Ex.rate diff.accts are incomplete for account 0010500400 currency INR
    Message no. F5063
    Diagnosis
    The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
    System Response
    The system cannot generate the exchange rate difference posting.
    Procedure
    By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
    Proceed
    However, all the necessary settings are made in KDF & KDB. Here we are processing payment for local vendor & the PO, GR, IR is done in INR then at the time of processing payment its giving above mentioned error. We are unable to understand that why system is asking for exchange rate difference account. Please suggest as the issue is urgent.
    Regards,
    Varsha

    Hi Varsha,
    As the message mentioned in detail, please check your configuration in tcode OBA1 again.
    For Transaction type KDF, you double click to your GL account, and maintain the Valuation loss/gain, balance sheet adjustment in there.
    For your ref:
    You can read more information about this error in SAP note 12962 - Clearing Foreign Currency Items
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D313239363226
    Regards,
    Julie

  • How to distribute exchange rate difference to material with moving average price?

    Hi community,
    Exchange rate differences are not distributed into the items based on the shipment (per article/material). Is there a workaround available based on the GR/IR exchange rate difference and the material that was purchased?
    Thank you and best regards,
    Barbara Dörr

    Hi Lokesh,
    thanks a lot for the quick answer, but I
    had read this documentation and only found this documentation of exchange rate
    difference posting:
    GR/IR clearing uses the exchange rate of
    the goods receipt. The GR/IR clearing run completely clears Unbilled Payables
    and Purchases in Transit. The run calculates price differences of EUR 155 and exchange rate differences of EUR
    135. The price differences are posted to the price difference account and the
    exchange rate differences to the exchange rate difference account.
    Therefore I guessed that the exchange
    rate differences are NOT distributed to the material with moving average price.
    Best Regards,
    Barbara

Maybe you are looking for

  • TS1702 Having deleted contacts deleted but they still show up

    So I deleted a contact in my iPhone but when I went into my messages and hit new message and started typing in a name it said the contact was still but like when I went back to my contacts it was not there

  • Very urgent help needed in activating a function module

    Hello experts. I had a standard report and i copied into an z report. i need to change some field output , and that field is there in a standard function module.so i copied that fun module  into z fun module and stored in a new fun group. Now it is s

  • T440P - Win 8.1 Fingerprint Single Sign on Issue

    Hi, I just bought the T440P laptop, and for some reason it never updated to win 8.1 pro from the CDs that were provided. So I installed Win 8.1 x64 Enterperise with Update (provided by my company). I downloaded all the drivers for win 8,1 x64 from th

  • Error -36 while trying to move files on SMB mounted NAS

    Hey, I have been experiencing an error -36 while trying to move files around on my NAS. I have the feeling it has something to do with insufficient privileges that are being acquired. When mounting in windows explorer no problems arise. When using th

  • Westell 6100G Data light constant activity

    I recived a new modem to replace my old 6100,my old one had 5 lights This new one (6100g) has 3 lights a internet ,data, and dsl light.Now I'm aware that when a light is flashing it means data is flowing through and or it's connecting.So why is it th