Exchange Server 2010 EMC Error

Hi, I have installed Exchange Server 2010 SP3 in Windows Server 2012 Domain Controller. After the successful installation, I am not able to view the options in the Exchange Management Console. It gives the error "The WinRM client cannot process the
request. It Cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid."
Can anyone help on this issue to solve this. Thanks in advance.
Regards
Babu

Hi
Installing exchange 2010 or any version on a domain controller is not recommended.
Please check that all the IIS App pools are started, the relevant services are started etc. Is this in a production environment?

Similar Messages

Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
Marty

I recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange Server 2010 OWA Error 405 StaticFileModule

I am running Exchange Server 2010
(Version 14.1 - Build 218.15) on Windows Server 2008 R2. This is a all-in-one-server roles installation. Everything is working fine except forms-based authentication. When enabled I get HTTP Error 405.0 "Method not allowed". The page
you are looking for cannot be displayed because an invalid method (HTTP verb) is being used.
Details are:
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070001
Requested URL https://localhost:443/owa/auth/owaauth.dll
Physical Path C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\owa\auth\owaauth.dll
Logon Method Basic
Logon User administrator
When in EMC, Client Access, on OWA & ECP tabs I change authentication forms-based to standard with basic check box and restart IIS the Web Access works fine.
I have already tested solutions like recreating Virtual Directories, Allow .Net 2.0, etc. I have also checked all the modules and the associated mappings in IIS one by one for every VM. I believe this is an error in a .config file. If you have encountered
a situation like this please help.

Hi Pantelis,
Please make sure that the client sends a request that contains a valid HTTP method.
1. Click Start, type Notepad in the Start Search box, right-click
Notepad, and then click Run as administrator.
Note If you are prompted for an administrator password or for a confirmation, type the password, or provide confirmation.
2. On the File menu, click Open. In the
File name box, type %windir%\system32\inetsrv\config\applicationhost.config, and then click
Open.
3. In the ApplicationHost.config file, locate the <handlers> tag.
4. Make sure that all the handlers use valid HTTP methods.
5. Save the ApplicationHost.config file.
More details to see: http://support.microsoft.com/kb/942051
Please also try to re-build OWA Virtural Directory. To see:
http://support.microsoft.com/kb/941201
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Exchange Server 2010 get error HResult = -2147024891 when Accessing Virtual Directories on CAS

I've just installed a Exchange 2010 server in an Exchange 2007 server environment.
The 2007 enviroment include two exchange server "Server-A" and "Server-B"
and "Server B" has dead on hardware issue for half year.
When I go to Microsoft Exchange On-Premises -> ServerConfiguration -> Client Access and receive the following error message
An IIS directory entry couldn't be created. The error message is Access is denied. . HResult = -2147024891 It was running the command 'Get-OabVirtualDirectory'
I try run the “Get-OwaVirtualDirectory” in powershell and get following result
From the power Shell command prompt .. Run
[PS] C:\Windows\system32>Get-OwaVirtualDirectory
An IIS directory entry couldn’t be created. The error message is Access is denied.
. HResult = -2147024891
+ CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
, IISGeneralCOMException
+ FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
I've google that i need to add "Exchange Trusted Subsystem" as a member in local admin group in Exchange 2007
but my exchange 2007 "Server-B" already dead, how should i fix it?
Appreciate for any help!!

re-create the new virtual directories does not work for me.
still got the error
An IIS directory entry
couldn’t be created. The error message is Access is denied.
. HResult = -2147024891
+ CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
, IISGeneralCOMException
+ FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
I don't understand why change new exchange server 2010 setting require me to have permission to access
my dead exchange server 2007

Exchange Server 2010 Installation Error

I am installing Exchange 2010 on a fresh Windows 2008 Server, and done with all the Prerequisites. but still i am getting this error...
I have Added These commands also to powershell.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
Still m not able to instal.
HELP:
mohit

Hello,
Please follow the Willard's suggestion.
Besides, please use dcdiag command-line tool to check if DC server run normally.
Please use telnet command-line tool to check 389 /3268 is opened on firewall.
Please restart Microsoft Exchange Active Directory Topology Service to check the result.
Cara Chen
TechNet Community Support

Exchange Server 2010 SP3 Installation with UM Language Pack Error

Hi All,
Kindly help me in this issue, When I Install Exchange Server 2010 SP3, I faced an error in UM role setup as the below,
and when i searched on it i found solution like "Download the UM language packs and tried to install directly" so i downloaded "UMLanguagePack.en-US" from the below URL:
http://www.microsoft.com/en-eg/download/details.aspx?id=36769
and when i tried to install it, i faced the below error:
also i searched on this error and i found solution in registry as the below:
Try remove registry key for the above error :
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\<Your Version >\UnifiedMessagingRole\LanguagePacks"
and after i did it, i found first error be solved and the second error still the same as the below:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just
this role, or remove the role using Control Panel.
Is there a solution on this issue please i wanna solve it As soon as possible?
Thanks in advance,

I solved the below error by editing in registry:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just this role, or remove the role using Control Panel.
Solution:
Open regedit (Start -> run), navigate to the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14
Under each role, UnifiedMessagingRole, have a look for an action and watermark entry, Delete these 2 keys, and retry. it solve this error, and You can now run the installation again of your "UMLanguagePack.en-US". and its done and installed now.
After "UMLanguagePack.en-US" Installation, i tried to continue installation of Exchange Server 2010 SP3, but I faced the same first error in UM role setup as the below,
What can i Do? please help urgently.

Exchange Server 2010 with SP3 Management Tools

Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote Powershell, this service must be running. Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed

Hello,
We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
2010 cannot be installed".
Here is the end of 'ExchangeSetup.log' showing various error messages:
[11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
[11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[11/29/2014 23:00:07.0522] [2] Unexpected Error
[11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
[11/29/2014 23:00:07.0523] [1] Executing:
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
[11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
[11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
[11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
[11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
if ($server -eq $null)
new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
" was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
[11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
[11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
[11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
[11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
[11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[11/29/2014 23:00:07.0633] [0] End of Setup
[11/29/2014 23:00:07.0633] [0] **********************************************
[11/29/2014 23:39:03.0429] [0] **********************************************
[11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
[11/29/2014 23:39:03.0435] [0] **********************************************
[11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
[11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
[11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
[11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
[11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
[11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
[11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
[11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
[11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
[11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
[11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
[11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
[11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
[11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
[11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
[11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
[11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
[11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
[11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
[11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
[11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
[11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
[11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
[11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
[11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
[11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
[11/29/2014 23:39:13.0920] [0] Applying default role selection state
[11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
[11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
[11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
[11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
[11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
[11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
[11/29/2014 23:39:26.0117] [0] End of Setup
[11/29/2014 23:39:26.0117] [0] **********************************************
I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
Thanks,
Voon

Thank you Larry and Al for your replies.
I used the 'official' migration
guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :)

When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Send As, Send on Behalf and Full Access for Exchange server 2010/2013

[This FAQ contains 2 parts]
Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
Common issue and Troubleshooting on the three permission.
[Testing and Watching]
Based on following blog, I decide to test on my lab:
Full Mailbox Access Rights + Send On Behalf = Send As ?
http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
Description on my lab and test:
Exchange 2010 + Outlook 2010
Exchange 2013 + Outlook 2013
Senders: A01, A02, … , A07, A08
Recipient: A09
A01 grand permission to other senders.
Two methods:
a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
Result as following forms:
1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
To A09.
2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
To A09.
[Common Issue]
1. [Issue]
Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Details as following pic:
[Troubleshooting]
1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
2. [Issue]
Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
Your message did not reach some or all of the intended recipients.
Subject: xxx
Sent: xx/xx/2014 8:20 AM
The following recipient(s) cannot be reached: A09
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Details as below:
[Troubleshooting]
1) Also check the Send As permission configuration first.
2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
\Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
5) Restart Outlook.
Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
From field.
3. [Issue]
Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
message is copied to the Sent Items folder of both A01 and A0x.
[Troubleshooting]
This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2632409/en-us
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
vs additional account defaults to different methods). Check the screenshot:
And please post this somewhere more visible, like blog/wiki page.

Exchange Server 2010 - OWA, ECP, EWS not working

Hello,
I am evaluating exchange server 2010. I was able to install it, but now the admin websites will not render in IIS. OWA, ECP, etc. I especially want Outlook Anywhere to work. I can admin through the windows admin interface so that's not a concern.
I want users to access their email through the web as well. I checked permissions but could have them wrong. Any help is appreciated.
Thanks
John Grace

There are about twenty different types of 403 error. To see which one is happening here, you'd need to look at the IIS log files, and get the status subcode, which is the number after the 403 in the logged line.
The most common, though, is 403.4, which means 'SSL Required'. What happens if you go to
https://servername (i.e. https instead of http).
Another one is 403.6, which means that IIS has been configured to only allow access to a certain range of IP address, and the one you're trying to access it from isn't one of them.
OWA For SmartPhone

Exchange Server 2010: Incoming mail not delivered

I have an Exchange Server 2010 Standard with all recent patches and updates.
-It has been in service for 3 years without any issues.
-There is plenty of hard drive space for the logs and the data (over 100GB in each)
-The current size of the mail database is 150GB
-There is no registry entry in place limiting the size of the database ([url="http://technet.microsoft.com/en-us/library/bb232092.aspx"]Database Size Limit in GB as outlined here[/url]
Starting a few days ago, incoming mail is reaching the server but not being delivered to user mailboxes. Internal mail works fine when this happens. Looking at the Queue Viewer doesn't show anything abnormal. The Submission Queue shows nothing.
It is only after I reboot the Exchange Server that the Submission queue will show all the messages waiting to be delivered and they will all be delivered successfully after the reboot. The event logs do not show any error messages.
The server will continue to run fine for a few hours and then the problem starts all over again.
What could be causing this?

Any 3rd party antivirus/anti-spam software installed on the server? If so, disable and test.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

Problems installing Mailbox role on Exchange Server 2010 SP3

I am in the process of installing Exchange Server 2010 SP3 on a Windows Server 2012 server in order to migrate our existing Exchange 2003 server. Everything went well with the installation process until I went to add the Mailbox server role, which is giving
me the following error (from the log file):
[05/03/2013 21:58:09.0090] [1] Executing:
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
[05/03/2013 21:58:09.0105] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'TAM-FS2.tacomaartmuseum.org', Preferred Global Catalog: 'TAM-FS2.tacomaartmuseum.org', Preferred Domain
Controllers: '{ TAM-FS2.tacomaartmuseum.org }'
[05/03/2013 21:58:09.0105] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
[05/03/2013 21:58:09.0276] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
[05/03/2013 21:58:09.0344] [2] Process standard output:
[05/03/2013 21:58:09.0344] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
[05/03/2013 21:58:09.0347] [2] [ERROR] Unexpected Error
[05/03/2013 21:58:09.0347] [2] [ERROR] Process execution failed with exit code 87.
[05/03/2013 21:58:09.0350] [2] Ending processing Start-SetupProcess
[05/03/2013 21:58:09.0350] [1] The following 1 error(s) occurred during task execution:
[05/03/2013 21:58:09.0350] [1] 0. ErrorRecord: Process execution failed with exit code 87.
[05/03/2013 21:58:09.0350] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
[05/03/2013 21:58:09.0351] [1] [ERROR] The following error was generated when "$error.Clear();
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
" was run: "Process execution failed with exit code 87.".
[05/03/2013 21:58:09.0351] [1] [ERROR] Process execution failed with exit code 87.
[05/03/2013 21:58:09.0351] [1] [ERROR-REFERENCE] Id=MailboxComponent___13A8A6B7DE0A4fe3BEB5CB1D86105DA3 Component=EXCHANGE14:\Current\Release\PIM Storage\Content Indexing
[05/03/2013 21:58:09.0351] [1] Setup is stopping now because of one or more critical errors.
[05/03/2013 21:58:09.0351] [1] Finished executing component tasks.
[05/03/2013 21:58:09.0393] [1] Ending processing Install-MailboxRole
I've searched all over but can't seem to find any reference to "exit code 87" - does anyone have any ideas?
Thanks,
Matt

Error 87 -with these details below - and a fix. The situation that got me here by the way was an incomplete install that was uninstalled, then installed again.
[02/24/2014 06:49:06.0967] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'xxxxxxxxxxxxxxx', Preferred Global Catalog: 'xxxxxxxxxxxxxxxxxxxxxxxx', Preferred Domain Controllers:
'{ xxxxxxxxxxxxxxxxxxxxxxx }'
[02/24/2014 06:49:06.0967] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
[02/24/2014 06:49:06.0967] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
[02/24/2014 06:49:07.0592] [2] Process standard output:
[02/24/2014 06:49:07.0592] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
[02/24/2014 06:49:07.0592] [2] [ERROR] Unexpected Error
[02/24/2014 06:49:07.0592] [2] [ERROR] Process execution failed with exit code 87.
[02/24/2014 06:49:07.0592] [2] Ending processing Start-SetupProcess
[02/24/2014 06:49:07.0592] [1] The following 1 error(s) occurred during task execution:
[02/24/2014 06:49:07.0592] [1] 0. ErrorRecord: Process execution failed with exit code 87.
[02/24/2014 06:49:07.0592] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
[02/24/2014 06:49:07.0608] [1] [ERROR] The following error was generated when "$error.Clear();
          $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
          $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
          Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
        " was run: "Process execution failed with exit code 87.".
[02/24/2014 06:49:07.0608] [1] [ERROR] Process execution failed with exit code 87.
I found I could fix this by removing the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Microsoft-Exchange-Troubleshooters/Operational
and everything underneath it.
My guess is that wevtutil didn't like adding an event log where it already existed but was slightly different in setup (no idea how, exactly).
After 24 hours I'll try post again - giving things time to make sure they are actually working.

Exchange Server 2010 after Office365 Cutover Migration

We transitioned to Office 365 4 months ago. Per this reference, we have left an Exchange Server 2010 on premise per this guidance.
http://blogs.technet.com/b/exchange/archive/2012/12/05/decommissioning-your-exchange-2010-servers-in-a-hybrid-deployment.aspx
I want to move Exchange 2010 to an older less capable server to repurpose the current server. I have installed it with client access and mailbox server roles.
When I try to uninstall the old Exchange 2010 installation, I can't do it citing the existence of mailboxes. When I attempt to remove an mailbox, the entire user is deleted from our Active Directory? Premise mailboxes are now irrelevant consider
they exist on Office365.
How do I decommission this old Exchange 2010 server without deleting all our users?

Hi,
The proper way to remove a hybrid deployment is to disable it manually. The following actions should be performed to remove the objects created and configured by the Hybrid Configuration
Wizard:
1. Re-point your organization’s MX record to the Office 365 service if it is pointing to the on-premises organization. If you are removing Exchange and don’t point the MX record
to Office 365, inbound Internet mail flow won’t function.
2. Using the Shell in the on-premises organization, run the following commands:
Remove-OrganizationRelationship –Identity “On Premises to Exchange Online Organization Relationship”
Remove-FederationTrust –Identity “Microsoft Federation Gateway”
Remove-SendConnector
“Outbound to Office 365″
3. Using EMC, you can also remove the <your organization domain>.mail.onmicrosoft.com domain that was added as part of the email address policy for your organization.
4. OPTIONAL – Remove the remote domains created by the Hybrid Configuration wizard in the Exchange Online organization. From the EMC, select the Hub Transport in the Exchange Online
forest node and remove all remote domains starting with “Hybrid Domain”
5. Remove the organization relationship from the Exchange Online organization with the following command. You must use Remote PowerShell to connect to Exchange Online connected to
Exchange Online.
Remove-OrganizationRelationship –Identity “Exchange Online to On Premises Organization Relationship”
6. OPTIONAL – Disable the Inbound and Outbound Forefront Online Protection for Exchange (FOPE) connectors created by the Hybrid Configuration Wizard.
Referred from:
http://www.paradyne.com.au/office-365-decommissioning-on-premises-exchange/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange Server 2010 EMC Error

Similar Messages

Maybe you are looking for