Exchange Server 2010 - OWA, ECP, EWS not working

Hello,
I am evaluating exchange server 2010. I was able to install it, but now the admin websites will not render in IIS.  OWA, ECP, etc. I especially want Outlook Anywhere to work.  I can admin through the windows admin interface so that's not a concern.
 I want users to access their email through the web as well.  I checked permissions but could have them wrong. Any help is appreciated.
Thanks
John Grace

There are about twenty different types of 403 error. To see which one is happening here, you'd need to look at the IIS log files, and get the status subcode, which is the number after the 403 in the logged line.
The most common, though, is 403.4, which means 'SSL Required'.  What happens if you go to
https://servername (i.e. https instead of http).
Another one is 403.6, which means that IIS has been configured to only allow access to a certain range of IP address, and the one you're trying to access it from isn't one of them.
OWA For SmartPhone

Similar Messages

  • Exchange server 2010 - Hub Transport rule not working

    Hello,
    I'm trying to create a hub transport rule that blocks any incoming / outgoing email with attachments larger than 10MB with an exception of a few users. 
    I've followed this article https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/.
    The send connector & receive connector is at 30MB right now and the distribution group has been made.
    I added myself to the distribution group which allowed me to send a 20MB size email.
    If I remove myself from the distribution group, exchange still allowed me to send the 20MB email size.
    Any advise is much appreciated.
    Thanks,
    Daniel

    Hi Daniel,
    Thanks for your response.
    The Hub Transport server is responsible for handling transport rules. The transport rules can't work without a Hub server.
    If there are any problems with Exchange, welcome to our forum.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Exchange Server 2010 OWA Error 405 StaticFileModule

    I am running Exchange Server 2010
    (Version 14.1 - Build 218.15) on Windows Server 2008 R2. This is a all-in-one-server roles installation. Everything is working fine except forms-based authentication. When enabled I get HTTP Error 405.0 "Method not allowed". The page
    you are looking for cannot be displayed because an invalid method (HTTP verb) is being used.
    Details are:
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070001
    Requested URL https://localhost:443/owa/auth/owaauth.dll
    Physical Path C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\owa\auth\owaauth.dll
    Logon Method Basic
    Logon User administrator
    When in EMC, Client Access, on OWA & ECP tabs I change authentication forms-based to standard with basic check box and restart IIS the Web Access works fine.
    I have already tested solutions like recreating Virtual Directories, Allow .Net 2.0, etc. I have also checked all the modules and the associated mappings in IIS one by one for every VM. I believe this is an error in a .config file. If you have encountered
    a situation like this please help.

    Hi Pantelis,
    Please make sure that the client sends a request that contains a valid HTTP method.
    1. Click Start, type Notepad in the Start Search box, right-click
    Notepad, and then click Run as administrator.
    Note If you are prompted for an administrator password or for a confirmation, type the password, or provide confirmation.
    2. On the File menu, click Open. In the
    File name box, type %windir%\system32\inetsrv\config\applicationhost.config, and then click
    Open.
    3. In the ApplicationHost.config file, locate the <handlers> tag.
    4. Make sure that all the handlers use valid HTTP methods.
    5. Save the ApplicationHost.config file.
    More details to see: http://support.microsoft.com/kb/942051
    Please also try to re-build OWA Virtural Directory. To see:
    http://support.microsoft.com/kb/941201
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Exchange Server 2010 SP3 Databases are not mounting after the recovery process

    Hi,
    We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
    same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
    with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
    An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
    it.
    I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
    For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
    Please help me with your valid comments to solve and mount the database and close the issue for ever.
    With Regards
    Jay

    Jared is correct that in essence the message is saying the DB cannot be found.
    When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
    When you restored into the recovery site do you have AD restored into that site as well?
    For the recovery server are you using iSCSI storage for it as well?   If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
    and test/recovery server?
    I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB.  If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
    http://www.lucid8.com/product/digiscope.asp using a free DEMO license.  If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
    DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

    Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
    Mailbox All Database Services - Default-First-Site-Name
    Mailbox Database Service - Management - test.local
    Mailbox Database Service - PublicFolders - test.local
    Mailbox Database Service - Users - test.local
    Mailbox Many Database Service - Default-First-Site-Name
    OfflineAddressBook Service - Default-First-Site-Name
    Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
    log on Exchange server itself.

    Hi There,
    Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
    Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
    Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
    Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
    Also is Agent proxy enabled ?
    Also is the Action account of the Agents System or Domain account ?
    Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
    Gautam.75801

  • "Message Queued for submission" performance counter high for Exchange Server 2010 Database

    Hi,
    We are receiving SCOM Alert as "Mail Submission service is experiencing issue: Messages Queued for Submission-sustained for 15 mins-RED (>25)".
    After checking the "Messages queued for Submission" counter on the repective server it was found that the value is 66 but when we check the queue viewer we dont observe any messages stuck in Submission queue.
    Would like to know what aspects can be checked here, in order to troubleshoot the issue?
    The counter shows 0 value in perfmon for all other mailbox databases.
    Thanks & Regards.

    Hi,
    This is a known issue with Exchange Server 2007 and Exchange Server 2010.  We do not recommend that you use this counter for health alerts.
    I recommend you refer to the following article:
    http://support.microsoft.com/kb/2921142/en-us
    It is caused by the MailSubmission service submits a message for delivery multiple times, the counter is incremented two times but decremented only one time. This situation can leave the counter with a positive value even though there
    is no message in the queue. When you restart the service, the counter is reset. 
    Here is an similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/c9b485a5-ef0e-4b9a-851e-28c4a4c0606a/msexchangeis-mailbox-messages-queued-for-submission-keeps-increasing?forum=exchangesvradminlegacy
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Exchange Server 2013 to 2010 mailbox proxy is not working

    I have exchange server 2013 and exchange server 2010 in co-exist. I have 3 cas server and 3 mbx server 2013 on windows server 2012 standard, 2 hub/cas server and 2 mbx server 2010 on windows server 2008 r2. when I try to access owa of exchange server 2010
    mailbox using exchange 2013 url, I am getting the error as "something went wrong. sorry, we can't get that information right now, please try again later. If the problem continues please contact your helpdesk"
    Vishal C. Kalal | MCITP: Exchange 2010-2007 | Windows Server 2008

    Hi,
    To narrow down the cause, I recommend the following troubleshooting:
    Check if the issue happens on all users.
    Try to directly login OWA 2010  and check if it works well.
    Check the IIS log on CAS 2013 server and find the error related to OWA.
    Thanks,
    Angela Shi
    TechNet Community Support

  • EWS API Retuning Login page as Reponse - Exchange Server 2010

    Hi!
    I'm currently working with the EWS API to pull calendars and events from an Exchange Account.  I'm using the Microsoft.Exchange.WebService.dll v15.
    My code works fine for an Office 365 hosted account.  But for Exchange Server 2010, I get the error:
    The response received from the service did not contain valid XML.
    After enabling tracing, I've learned that the response is actually the login page, not the expected XML with the calendars.  It's returning the HTML of the login page as the response.
    At this point, I'm unsure of what's going on.  Any help is greatly appreciated.  In the meanwhile, I'll keep poking around.
    Thank you!

    The place to start would be to check your EWS End Point 
    how are you getting this ?
    Are you use Autodiscover ?
    Do they have a different Internal vs External EWSUrl ? where are you running your code from ?
    If your getting a Logon prompt it sounds like FBA has been enabled on the EWS directory or is it being published through a reverse Proxy ?
    You should be able to just use a browser against the endpoint to test it you might want also want to use the EWSEditor
    http://ewseditor.codeplex.com/ to try to do some testing against different endpoints (eg try just use the Cas ServerName and building to the URL yourself instead of using Autodiscover eg
    https://casservername/ews/exchange.asmx ) 
    You can also do some external testing using
    https://testconnectivity.microsoft.com/
    Cheers
    Glen

  • Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

    Hello,
    I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
    Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
    Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
    * Note. No back ups to work with aside from whats mentioned below.
    DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up. 
    The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
    "No Exchange servers are available in any Active Directory sites. You can’t connect to remote
    Powershell on a computer that only has the Management Tools role installed."
    Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc  per instructions only to discover I couldnt relaunch it because there was
    no way how. So I copied another msc file that happened to be on the DC Server 1  back to Exchange Server 2 and got it to launch again. 
    Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
    it is using the Certificate Authority Service.
    I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
    "The Trust Relationship between this workstation and primary domain failed."
    I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
    I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started. 
    I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
    https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
    and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
    Marty

    I recommend that you open a ticket with Microsoft Support before you break things more.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Exchange Server 2010: Incoming mail not delivered

    I have an Exchange Server 2010 Standard with all recent patches and updates. 
    -It has been in service for 3 years without any issues. 
    -There is plenty of hard drive space for the logs and the data (over 100GB in each)
    -The current size of the mail database is 150GB
    -There is no registry entry in place limiting the size of the database ([url="http://technet.microsoft.com/en-us/library/bb232092.aspx"]Database Size Limit in GB as outlined here[/url]
    Starting a few days ago, incoming mail is reaching the server but not being delivered to user mailboxes. Internal mail works fine when this happens. Looking at the Queue Viewer doesn't show anything abnormal. The Submission Queue shows nothing.  
    It is only after I reboot the Exchange Server that the Submission queue will show all the messages waiting to be delivered and they will all be delivered successfully after the reboot. The event logs do not show any error messages.
    The server will continue to run fine for a few hours and then the problem starts all over again.
    What could be causing this?

    Any 3rd party antivirus/anti-spam software installed on the server? If so, disable and test.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Exchange server 2010 console not opening, inialization failed

    hi,
    exchange server 2010 console not opening, inialization failed when i have upgraded service pack to sp1.
    please suggest asap or u can reach me @
    [email protected]
    [email protected]
    +918750003544

    Even I found the same issue once, and then I realised that the SP and RU should be same in exchange sever and the machine where the issue is.
    Could you please check the same if that  machine has the same Sp and RU, if not, please upgrade the same? I bet it will start working
    Regards,
    ASP20
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Documentation for getting Webcenter PS4 to work with Exchange Server 2010.

    I have a customer who has Microsoft Exchange Server 2010 and wants to have their e-mail in WebCenter Spaces app we have built, using 11.1.1.4 or 11.1.1.5. Do either of these support Xchange Server 2010? Probably not, right? Well has anybody done it and been able to get it to work? Is there any documentation out there that tells how to do it?
    Thanks,

    This documentation is great. Thanks,
    Is there any documentation on this for 11.1.1.6? (PS5)? The documentation you gave me is 11.1.1.5 and it shows Exchange Server 2007. My customer has Exchange Server 2010. Do you know if 11.1.1.5 and/or 11.1.1.6 supports Exchange Server 2010?
    Again, thanks for your help.

  • How do I get macmail to work with exchange server 2010?

    my company upgraded to exchange server 2010 and since then, I can't access ical shared calendars. I've been forced to switch to Outlook for my email client at work. Now I can't receive email at home using macmail. Is there a way for macmail to work with exchange server 2010?
    Intel tower running snow leopard 10.6.8 with the latest version of macmail.
    Any insight into this problem is greatly appreciated.
    Thanks very much.

    Hi,
    Please refer to the following link http://forums.adobe.com/docs/DOC-3581
    For changing the HTTP, you need to do it outside the muse after exporting the site or after uploading it to godaddy.
    Regards,
    Aish

  • BlackBerry Not showing e-mail subfolders configured on my Exchange Server 2010

    Salutations Good People,
    I recently activated my Blackberry Curve 8520 with my BlackBerry Entreprise Server which is synced with Ms Exchange server 2010, the problem is that on my Curve i can only see emails sent to my Inbox but any emails under my Exchange Mailbox subfolders are not being displayed on my Curve although the actual subfolder are shown on my Curve but inside them there is always empty, Please assist
    Kindest Regards
    Benjie

    Hi benjrix
    To receive emails that arrive in subfolders, you will have to enable folder redirection.  The following article will show you how to configure folder redirection for your BlackBerry® smartphone.
    KB04297 - How to configure folder redirection to receive email messages delivered to folders other t...
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Send As, Send on Behalf and Full Access for Exchange server 2010/2013

    [This FAQ contains 2 parts]
    Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
    Common issue and Troubleshooting on the three permission.
    [Testing and Watching]
    Based on following blog, I decide to test on my lab:
    Full Mailbox Access Rights + Send On Behalf = Send As ?
    http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
    Description on my lab and test:
    Exchange 2010 + Outlook 2010
    Exchange 2013 + Outlook 2013
    Senders: A01, A02, … , A07, A08
    Recipient: A09
    A01 grand permission to other senders.
    Two methods:
    a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
    b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
    Result as following forms:
    1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
    Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
    To A09.
    2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
    Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
    To A09.
    [Common Issue]
    1. [Issue]
    Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
    You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
    Details as following pic:
    [Troubleshooting]
    1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
    2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
    Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
    Store service.
    2. [Issue]
    Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
    Your message did not reach some or all of the intended recipients.
    Subject: xxx
    Sent: xx/xx/2014 8:20 AM
    The following recipient(s) cannot be reached: A09
    This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
    Details as below:
    [Troubleshooting]
    1) Also check the Send As permission configuration first.
    2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
    3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
    4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
    \Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
    5) Restart Outlook.
    Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
    From field.
    3. [Issue]
    Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
    message is copied to the Sent Items folder of both A01 and A0x.
    [Troubleshooting]
    This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
    Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
    http://support.microsoft.com/kb/2632409/en-us
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
    vs additional account defaults to different methods). Check the screenshot:
    And please post this somewhere more visible, like blog/wiki page.

Maybe you are looking for

  • "Company code not assigned to country or country to calculation procedure"

    Hi , I'm practicing SAP on IDES at home. I have not created any 'Calculation procedure' (TAXINN or TAXINJ)  neither assigned any procedure to country 'IN'. I have maintained tax category 'MWST' for 'IN' in OVK1 and also assigned my delivering plant f

  • Pages 5.2 on iMac is too slow!!!

    I have upgraded right now Pages 5.1 to Pages 5.2. I opened my file, but it is quite impossible to write. Pages is becoming very slow. One word needs a lot of seconds to appear on the screen! What is happened? Any solutions? I have already restarted P

  • Wi Fi Disabled while restoring iPhone 3G with 3.1.2 Software

    I am having one apple iPhone 3G with me .recently I am restored the phone in Factory default settings and install the new software which is 3.1.2.Now the phone is locked and I am not able to unlock the phone,because the Wi Fi is not enabled.Showing (

  • JDev Platform Question

    I just returned from Open World and would like to set up JDev on my desktop. I am running windows 98, which according to previous postings in this forum, may or may not work. Should I just buy NT workstation and set up a dual boot on my computer? Any

  • Problem with setting up new iphone

    Hi, I recently upgraded my iphone form a 3 to 4S. I backed up my old phone before connecting one. I followed all the steps I should have but it has not worked. The back up has worked for my calender and notes and contacts but mu music and aps have no