Exchange Server 2013 Database not showing in ECP after removal of Exchange Server 2010

I recently complete the migration of my Exchange 2010 server to Exchange 2013. I then proceeded to uninstall the 2010 server using setup.com /m:uninstall. At the end of the process I received an error that it did not complete the uninstall.
I checked the server and Exchanged 2010 was removed. When I checked ECP on 2013 it still showed the old 2010 server listed. I used ADSI edit and manually removed the old sever.
Now when I log into 2013 ECP I only see the one serve but when I go into databases, none are listed. I check under the server itself and it shows the database that it is using but it is not listed under the database tab.
If I do a search under the database tab I can find it and adds it to the list. I can then open and view details.
My issue is, after I log out and then back in, I have to run the search to find the database again. In ideas on how to have it show up in the list like it did  before I removed the 2010 Exchange server?
Thank you,

Hi,
From your description, I recommend you verify the following things for troubleshooting:
1. Please make sure that AD replication is completely by checking the user object's homeMDB attribute. This value should contain the DN value of the Exchange Server 2013 mailbox database.
2. Wait 30 minutes for the cache on the Exchange Server 2013 Client Access Server to clear or restart the MSExchangeOWAAppPool on the Exchange Server 2013 Client Access Server.
For more information, here is a kb for your reference.
Exchange 2013 Redirects to Exchange 2010 for OWA and ECP
http://support.microsoft.com/kb/2931385
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

  • Project Server 2013 timesheets not showing up for approval

    We're using Project Server 2013 and entering timesheets. I'm a team manager who is set up as the timesheet approver for a few people, including Nicole.
    Nicole opens her timesheet and fills it in for the week.  She applies time to four Administrative tasks and two project tasks.
    Nicole submits her final timesheet for approval.  (We have also tried having her save it first, then to the final submission, with the same results.)
    I go to my approval screen and see the four Administrative tasks listed as separate lines.  I do not see the project tasks.
    I select the four Administrative tasks and approve them.  They disappear when the screen is submitted.
    In previous weeks, and with some other employees, I would immediately see a single line item that said "My Timesheet" for Nicole which I could then approve.  But recently this stopped, and I do not see her timesheet.
    If Nicole checks the status of the timesheet it says it's submitted to me.
    On my Approval page if I go to History, Timesheets this timesheet is not listed under "approved by me" nor is it under "my resources unsubmitted timesheets."  It's in limbo.
    The only fix is for Nicole to recall the timesheet and resubmit it.  Then it shows up on my Approval page.
    Any suggestions?
    -- Paul

    We resolved this. The solution was as follows:
    Go to PWA Settings, and under Security choose Manage Groups.
    Click the Team Members group.
    Scroll to the Categories section, and in the Selected Categories area highlight (select)
    My Tasks.
    Click the box to allow the permission called Adjust Timesheet which is under the grouping for Resource.
    Now don't ask me how or why that works.  It's not a setting that intuitively matches what's going on.  But it fixed it for us.
    By the way, we had a number of other timesheet issues (view failures, etc.) that were all cleared up when we installed the April 2014 Cumulative Update for Project Server 2013, as well as SharePoint 2013 SP1.  I highly recommend both.
    -- Paul
    Paul LoSacco, Web Presence Team, Omnicare

  • Workflow in Project server 2013 online not going particular stage after Approval

    Hi All,
    i have created workflow using sharepoint designer 2013 for project server 2013 online. and i have also set the approver after the first stage. when i create a project using this workflow, project is created successfully and the approval task also go for
    a approval to specific user. and i have set the property that after approval it has to go on specific stage. but the problem is when user approve the task it shows approved but my stage in workflow is remain same. it is not going to any stage. 
    i don't know why this type of problem is occur. 
    FYI, i have created same workflow for Project server 2013 on premise(Which is installed in my server) and
    it is working fine but when i want to deploy this workflow in
    project server 2013 online its giving error.
    so please help me to solve this type of issue.
    Thanks

    I am also experiencing issues with this.  After the approval task is completed, the Workflow gets cancelled with the following message
    RequestorId: 60d96368-4cb4-b059-8086-604972a92e60. Details: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)
    at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
    bookmarkManager, Location resultLocation)
    All other desired workflow actions work as expected.  Emails are sent, project is moved from stage to stage, however as soon as the workflow approval task is completed, either Approved or Rejected, the Internal Status is changed to Canceled and the
    workflow fails.
    What is interesting is when the Approval task is completed, the approver will receive an email notification that the task was CANCELLED or DELETED....
    not COMPLETED, which is what would be expected.
    Has anyone seen this - any potential resolution?

  • MacBook Pro late 2013 does not show login window after waking from sleep

    MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
    This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
    Any ideas?
    Thanks
    marcus

    Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
    I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
    I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
    sudo pmset -a autopoweroff 0
    We'll see if it helps.
    It happens toughly a couple of times a week.

  • Oracle SSO not showing up status after rebooting the 10gapplication server

    Hi all,
    I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
    After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
    For Infrastructure
    1.     To make the metadata repository up and running
    Log in as an oracle user
    #cd /home/oraASInfra/bin
    #export ORACLE_HOME=/home/oraASInfra
    #export ORACLE_SID=mamcinfr
    #./lsnrctl start
    #./sqlplus
    Enter userame: sys as sysdba
    Sql>startup
    Sql>Exit
    2.     To start the other components of the infrastructure
    Log in as an oracle user
    #cd /home/oraASInfra/opmn/bin
    #./opmnctl startall
    3.     To start the iasconsole
    #cd /home/oraASInfra/bin
    #./emctl start iasconsole
    For Middle tier
    1.     To start the middle tier components
    Log in as an oracle user
    #cd /home/oraASmt/opmn/bin
    #./opmnctl startall
    2.     To start the iasconsole
    #./emctl start iasconsole
    In the MT all the components is showing up status
    In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
    There is no any port conflicts between the infrastructure and MT.
    Is there any post installation tasks has to be done after the installation?
    please help me to sort out the issue.
    thanks,
    C Saju

    1. After RapidWiz with 11.5.10.2 CDs, do we need to
    do any post installation step to make the browser
    load Oracle Forms. Do we need to create our own
    certificate using envshell.cmd and then adjkey. And,
    apply that to Jinitiator using adjbuild.sh and
    regenerate JAR files using ADADMIN Jar ( I am so far
    assuming that these steps are not necessary after for
    rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
    2. Do I need to apply the Oracle App 11i 11.5.10.2
    Maintenance Pack after installing using RapidWiz from
    the main set of CDs labeled as 11.5.10.2No
    3. Should I try by installing manually latest
    Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
    Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
    adjkey -initialize
    This will create the following files:
    - adsign.txt directory $APPL_TOP/admin
    - appltop.cer direcotry $APPL_TOP/admin
    - identitydb.obj directory $HOME of the user that launch adjkey
    Metalink note: 365735.1 should be helpful.
    Good luck

  • OS X Server Calendar Service not showing any events after upgrade

    Hello,
    I recently upgraded my Late 2012 Mac Mini Server that was running Mountain Lion and Server 3.2 to OS X Yosemite and Server 4.0. After the upgrade I got a lot of calls from users who state that all of their calendar items have been erased from their iPhones and iPads. I also noticed the same thing on my calendar. Does anyone know how I would restore those times? Has anyone noticed the same thing after an upgrade?
    Thanks!

    Correction... I am running Server 2.2.4.

  • Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1

    Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1
    When I manual start MSExchangepop3 Service on CAS It show "The Microsoft Exchange POP3 Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    In event log show POP3 EventID 1018 , 1019 , 1036
    It said like this blinding already use (0.0.0.0)
    The point is "IF I SET BINDING FOR 995 , MSEXCHANGE POP3 Service will automatic stop"
    Does anyone face this issue please?
    Thank you

    You could check what (if anything) else is running on that port.
    From a command prompt, type netstat -ano | find 995
    This will give you the Process Identifier (PID) for the process that is running on port 995. Then you can open Task Manager, add PID as an additional column, and find out what that process is.
    Hope that helps.

  • Biztalk Server 2013 does not support Windows Server 2012 R2

    is there any document or statement from MS that States "Biztalk Server 2013 does not support Windows Server 2012 R2"

    Hi Mohit,
    I haven't come across any document, but there is a blog from Microsoft about it.
    http://blogs.msdn.com/b/biztalknotes/archive/2013/10/29/biztalk-2013-compatibility-with-latest-platforms-of-microsoft.aspx
    Maheshkumar S Tiwari|User Page|Blog|BizTalk
    Server : How Map Works on Port Level

  • Server name is not displaying in Dropdown After client installation

    Server name is not displaying in Dropdown After client installation . what might be a issue

    Hi
    Depending upon the installation issue may be differ, so which SAP version and database version you have installed ?
    you can check
    1. Windows installer
    2  Sql Native client
    is installed or not.
    Thanks
    Kamlesh

  • Email address change not showing on ipad after sync

    iTunes email address change not showing on ipad after sync

    So change it.
    Open iTunes, scroll to the bottom of the main page, tap your account name, log out then sign in with the correct name.

  • I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

    I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

    iOS: Device not recognized in iTunes for Mac OS X

  • Albums not showing in library after import

    Just install iTunes 10.4.1.10 on Win XP (have same issue on Win 7) it auto added my music folder but its all messed up due to filenames etc so I deleted everything from library with the intention of manually importing everything.  Albums are not showing in library after going File -> Add Folder to Library...
    Any ideas?

    Note that Pause and Resume can be found in the right-click context menu of an item (toolbar drop-down list).
    Do you have the .part file or only the (final) file with a byte count of 0 bytes?
    If the .part file and doesn't have the expected file size (2 GB) is missing then you won't be able to resume this download anyway. You can check the temp folder as well.

  • Not showing company list after installing B1 2007 on windows 2003 standard

    Hi gurus,
    I am facing a problem regarding B1.System not showing  company list after installing B1 2007 on windows 2003 standard edition.
    Plz help me.
    Thanks in advance
    Regds
    Maddy

    Hi Maddy,
    Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
    Vasu Natari.

  • USB Drives works, but does not show up in "Safely Remove Hardware"

    USB Drives works, but does not show up in "Safely Remove Hardware"
    windows 8 
    USB Drives works, but does not show up in "Safely Remove Hardware"
    Here are my symptom
    - USB Flash Drives , USB External HDD works normally
    - I can see them in "My Computer"
    - I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
    - They show up as "Disk drives" in device manager
    - When I right click their icons in "My Computer", there is no option to "Eject" them
    - In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
    After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
    I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
    Thank you

    Hello Mickey2003
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"

    hi
    USB Drives works, but does not show up in "Safely Remove Hardware"
    Here are my symptom
    - USB Flash Drives , USB External HDD works normally
    - I can see them in "My Computer"
    - I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
    - They show up as "Disk drives" in device manager
    - When I right click their icons in "My Computer", there is no option to "Eject" them
    - In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
    After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
    I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
    Thank you

    Hello takpesar,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for