Exchange server 2013 mail send and received problem

Hi Support,
I have Install Exchange server 2013 and create mail box and local send received locally but days back i have not able to mail send and received. what setting are required for user mail send and received locally. and how to create mx and txt record for my
domain.

Hi,
According to your description, I know that the Exchange server can send/receive internally at beginning, however doesn’t work now. Please correct me if there is anything misunderstand.
Great checklist from S.Nithyanandham. Additionally, how about sending/receiving via OWA? And any error messages when can’t send and receive?
Please make sure the Message Tracking has been enabled and run following command to output track log and check detail information:
Get-MessageTrackingLog |FL > "c:\Track Search.txt"
For more information about Message Tracking logs, please refer to below article:
http://technet.microsoft.com/en-us/library/bb124926
If you want to communicate externally, you need to contact ISP to register DNS MX record.
Best Regards,
Allen Wang

Similar Messages

Excahgne 2013 outlook 2010 don't update folders from exchange server, from owa send and receive is ok

I have exchange 2013 server, with database for each department last week we have power problem, servers down
after servers goes on line, i have database with dirty shutdown, cant mount it, then i do eseutil/p, then i mount it, then all users access there mails from outlook 2010 they can send and receive, except one user cant receive new mail to outlook but he can
send mails from outlook (in outlook the folder last update 22april), from owa he receive anew mails and can send,
i try to delete outlook profile and create it again i get folder has not yet been updated
i try to repair exchange database again, but the same problem
i try to move it to another database or another server but move fail
if i use outlook online (remove use cached mode) its receive new mails.
Any help?
Thanks

Hi,
What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
Thanks,
Simon Wu
TechNet Community Support

Apple Mail send and receive problems, Network Solutions

Hello Everyone,
I'm currently facing a problem with a company email account that we have with network solutions.
NSmail Pro (IMAP) that is configured with apple mail. Here are the settings that i have:
Incoming mail: mail.(company.domain).com
Port: 110
SSL: No
Outgoing mail: smtp.(company.domain).com
Port: 2525
SSL: No
Auth: Password
Whenever i'm at the office, I can send and receive emails without any problems (Using mail app), but when i'm at home i can't receive emails nor send one.
I'm wondering if this has something to do with the Mail application, cause i can access the email using the webmail on a browser without any problems (either at home or at the Office).
Any thoughts from our experts?

I'm guessing that when you are at the office, you are probably accessing a company network and the company mail will only work with those settings on the company network. You may need to discuss this with your IT department at work to see if it need a different configuration for outside access.
The fact that it works at work and not at home indicates a that it surely an issue with the connection setup.
Assuming that you are accessing it through wi-Fi at both locations, do you have different wi-Fi connections set up on you Mac in Network Preferences, or is it the same wi-Fi connection used for both? In other words, do you have a specific wifi setup on your computer for connecting at the office?

Exchange Server 2013: no send/receive after failed CU1- CU2 and machine restore

Hi!
For several reasons, I decided to fully restore my Exchange Server 2013 machine today.
The machine is virtualized on Hyper-V.
I rebooted the server and recovered from backup and Exchange seems to be working fine. However, I cannot receive or send mail. If I try to send a message it goes to the "drafts" folder. OWA and EMC is working. I can not send mail between interna mailboxes
either. Outlook says disconnected.
When running the Exhchange Connectivity Analyzer, I get the following:
- Receive: Connection was successful but no banner was received.
- Send: Successfull. However when trying to send mail to external mailbox it does not reach that mailbox.
Mailflow was working perfectly at the time of the backup.
Help is much appreciated!
UPDATE 1: When telnet on local server i get SMTP banner. But not on other computers in same subnet.

OK. After fiddeling around in ADSIedit and trying to rebuild my Exchange environment I ended ut breaking it completely.
I then restored both my DC (Exchange schema CU2) and my EX (Exchange schema CU1). Scema Versions where the inconsistent as stated.
Then I uninstalled the KB2874216 successfully. After that i tried to Upgrade Exchange to CU2. The Upgrade failed at Mailbox Role: Mailbox Service With error Message:
The following error was generated when "$error.Clear();
          if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
            if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
              $sysMbx = $null;
              $name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
              $dispname = "Microsoft Exchange";
              $mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
              if ( $mbxs.length -eq 0)
                $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                if ($dbs.Length -ne 0)
                  $arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
                  if ($arbUsers.Length -ne 0)
                    $sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
              else
                if ($mbxs[0].DisplayName -ne $dispname )
                   set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
                $sysMbx = $mbxs[0];
              # Set the Organization Capabilities needed for this mailbox
              if ($sysMbx -ne $null)
                  Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
                  set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
                  # No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
                  # This can be remove after BUG(O15#2555914) is fixed.
                  if ($sysMbx.RetentionPolicy -eq $null )
                     $arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
                     set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
              else
                Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
            else
              write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
        " was run: "Database is mandatory on UserMailbox. Property Name: Database".
Seems the problem was corrupted arbitrary system mailboxes from previous Exchange 2010 to Exchange 2013 migration.
The solution for me was to restore the corrupted arbitrary mailboxes using this
LINK. It is for 2010 but Works on 2013.
I am now currently on Exchange CU2 on both my EX server and on my DC. Now I have to check mail flow and will report back.

Exchange server 2013 - cannot send / receive external emails - we can access owa -we can send/receive internal emails

Exchange server 2013 in Windows server 2012 VM
It was working fine then start the issue.
Firewall is managed externally and the last report said:
"I checked the firewall logs, which shows traffic being allowed through port 25 from 10.10.10.10 to 4.28.237.225: Log Number 116 Last Activity 2014-08-28 23:48:33 Status [accept] Src 10.10.10.10 Dst 4.28.237.225 Service SMTP Policy ID 1 Src Port 64081
Dst Port 25 While I showed one log, there were multiple log entries showing the same: traffic being accepted through port 25 from 10.10.10.10 to 4.28.237.225.
Can you verify that the mail server is set up so as to allow port 25? "
Today I was able to telnet the server from home: successfully
220 DTALL-EXCSRV002.DTC.dualtemp.com Microsoft ESMTP MAIL Service ready at Sat, 30 Aug 2014 16:31:16 -0400 ehlo 250-DTALL-EXCSRV002.DTC.dualtemp.com Hello [70.44.124.141] 250-SIZE 37748736 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS
250-AUTH NTLM 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250 XRDST
Also the receive - send connectors seems ok
Mx record point to Microsoft protection:
dualtemp-com.mail.protection.outlook.com.
Again, OWA is able to access and send/receive emails internal but never external even no bounceback just it never arrive.
Help me please. This is my first admin chaos...

Hi,
Is there any update with your issue?
If the CAS and Mailbox servers are collocated on the same server, the SMTP Receive connection for the Transport service will listen on 2525 instead of 25. If you install the CAS and Mailbox on the same server, please make sure that port 2525 is open.
For more information about Exchange 2013 mail flow, here is a blog for your reference.
Exchange 2013 Mail Flow Demystified…Hopefully
http://blogs.technet.com/b/rischwen/archive/2013/03/13/exchange-2013-mail-flow-demystified-hopefully.aspx
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Configuring Multiple domain Email addresses in Exchange server 2013 for Send/Receive

I've setup an exchange server 2013 , I have an requirement to setup email addresses for multiple domain account.
For example - My primary email addresses - [email protected] however i need to setup multiple domain email account for single AD user.
Example
[email protected]
[email protected]
[email protected]
I was able to setup account to receive email from different users to single mailbox users however how can i send mails from other domains email address apart from primary domain email
Thank you
Benhur

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Weblogic server: how to send (and receive) mail directly

Hi everyone,
As the subject, I want to configure weblogic server to send ( and receive) notification message to user email address. Is it possible?
Any suggestion is appriciated.
Thanks.

Hi Mr. Nimphius,
I have created the mail session with the integrated weblogic server with the following properties:
mail.debug=false;
mail.smtp.password=xxxxx;
mail.smtp.starttls.enable=true;
mail.smtp.user=[email protected];
mail.smtp.host=smtp.gmail.com;
mail.smtp.auth=true;
mail.smtp.port=587;
mail.disable=false;
mail.verbose=true;
mail.transport.protocol=smtp;
and here is the result:
avax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Do you have any ideas to resolve this Exception?

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Another send and receive problem

We have three accounts setup on our iMac. Mine, my wife, and our children.
My account and the kids have no problem sending or recieving email. But my wife can only send and receive emails hit and miss. We are all using the same pop account, so I have those setting correct. Some times she gets the prompt asking to retry send. Some times it just takes them off line.
Any ideas?

The easiest fix would be to just use safari and a webmail interface.
For example, I have yahoo in my mail app. But on some internet connections it just won't work, so I use safari to get to yahoo.com and access my mail that way.
Your mail provider should have a web interface and you could use that.

User mail send and receive restrictions

Hi there,
Is it possible to restrict multiple user send and recieve function on outlook through exchange to between certain times in the day? For example the users may not send or receive mail between 8:00am an 10:00am to force them to concentrate on another task.

Hi,
As Li Zhen suggested, you can set the send and receive quota using the cmdlet below on 8 am, and configure the send and receive quota back to normal on 10 am.
Set-Mailbox -Identity xxx -IssueWarningQuota xxx -ProhibitSendQuota xxx -ProhibitSendReceiveQuota xxx -UseDatabaseQuotaDefaults $false
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

How to build an E-mail sending and receiving application in Windows Azure?

I am a beginner Windows Azure Developer and I am trying to build applications like Gmail, Hotmail, YahooMail, etc. However, I am unable to build such an application. I have come to know how to send e-mail using SendGrid. Even, I don't know how to configure
to receive e-mails. Please help me on how to develop such an application in windows azure.
Regards

hi Yash,
Thanks for posting!
About how to send mail using sendgrid, I suggest you could try this tutorials firstly via smarx's blog(http://blog.smarx.com/posts/emailtheinternet-com-sending-and-receiving-email-in-windows-azure).
It supplied the method and code sample you could download . You may need create a listener to listen on the right port on workrole always.
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Exchange Server 2013: Outook Clients and OWA keeps on disconnecting/connecting every 5-10 mins

We have a new exchange server 2013 installed but also has exchange 2007 up.
MX records are now pointing to the new exchange server, all were working ok after DNS records were changed but after the weekend it Outlook clients and OWA keeps on disconnecting and reconnecting from exchange.
Exchange 2013 CU6
Anybody else experienced the same?

hi Jheycie,
can you please check if you have .local and .com (different internal and external domain)
almost similar thread.. it worked for me
http://social.technet.microsoft.com/Forums/office/en-US/cc7d2300-0e1f-499f-a8f1-97f84687b6cc/emails-stuck-in-outlook-have-to-restart-transport-service?forum=exchangesvrgeneral
http://social.technet.microsoft.com/Forums/office/en-US/9b9bf607-f882-4f73-a7b2-611ace3f3115/users-unable-to-connect-to-exchange-unless-they-close-and-reopen-outlook?forum=exchangesvrgeneral
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

E75 send and receive problem

I have had my e 75 for about a month. Two days ago it started to continuously send and receive all the emails in the inbox. The number of emails will reduce to zero and then they all come back again then return to zero then come back on and on. they stop when I select disconnect. No idea why this has just started happening as it was fine for 3 - 4 weeks. any ideas?

I have had my e 75 for about a month. Two days ago it started to continuously send and receive all the emails in the inbox. The number of emails will reduce to zero and then they all come back again then return to zero then come back on and on. they stop when I select disconnect. No idea why this has just started happening as it was fine for 3 - 4 weeks. any ideas?

Mail send and receive

Hi All,
We are trying to read mail from our MS exchange server.
When we execte the transaction, its throwing the error : connection refused.
But when we are trying to send mail, its not throwing any error and mail is sent successfully.
Are we missing any thing or there must be some firewall issue?
regards
Rupesh

Rupesh,
I agree with Rick. Sending the e-mail successfully means that the SMTP configuration is OK, and not receiving means POP3 settings are the issue. I would validate the "MailServer", "Port", "MailAccount", and "MailAccountPassword" properties you used in the Read Mail action with your administrator.
Regards,
Kevin

Using Mail, sender and receiver addresses getting mixed.

I'm using the mail app for my company gmail account (@companyname.com) we have them set up for the whole office.
Well what appear to be normal when I write an email and sent it to the desired person, it will later say on their screen or mine that it was sent to entirely different people in my contacts. While the right people still receive the email I indented to send to them they or I see the wrong addresses. Making things very confusing as you can imagine. So for instance I'll send out an email to a client but will say that it got sent to two of my coworkers, however it didn't actually get sent to them, it got sent to the client but just says it went to the wrong people, furthermore on their screen it will say it was sent from a different person as well. Recently got a new macbook so I had to reset up my mail account and it seemed a little dodgy at first so I'm wondering if some got set up wrong and I need to clean out the whole mail accounts, wipe cache?
Please advise. Thank you!
Nate.

adeelarifbhatti wrote:
please can any one tell me how can i log that which user has sent the mail to which user .Messaging Server already provides this information if you add the "logging" keyword to the defaults channel definition in the imta.cnf file e.g.
23-Jun-2008 10:00:58.98 tcp_auth ims-ms EEA 8 [email protected] rfc822;[email protected] recipient_username@ims-ms-daemonIf your users are using SMTP Authentication, you should also add "LOG_USERNAME=1" to the option.dat file to have the smtp authentication username added when used.
Regards,
Shane.

Exchange server 2013 mail send and received problem

Similar Messages

Maybe you are looking for