Exchange server 2013 send and received issue

Hi Support,
I have install Exchange Server 2013 with server 2012 ( my domain not resisted but mail send & received in local for practice then live ) but few days back some changes in dns and ecp and mail stop sending and receiving. how to verify my exchange server
2013 working fine. Please give the step check perpoes.     

dear Pardeep, you said it was working fine then you did some DNS changes..
i would suggest you best troubleshooting step is to go to exrca.com and perform the tests and from there we take it up.
Secondly you can verify your config from the below link.
http://www.techieshelp.com/exchange-2013-step-by-step-configuration/        
in DNS you need to make sure you have atleast MX and A record done for your server having email services installed.
for ECP... i would we would take this later lets check the mail sending and receiving first. use the above links
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Similar Messages

  • Exchange Server 2013 internal and external DNS records

    I recently installed Exchange Server 2013 and I've register a pubic ip too for exchange server. How can I create internal DNS as well MX record for my Exchange server to send and receive internet mails. It's my first time configuring exchange for a organization.
    registered domain name=====np.bbcmediaaction.org
    public ip=====202.166.212.221

    Hi,
    For external mail flow, we need the following DNS records: MX records for the domain part of the external recipient, A records for the destination messaging servers. For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/bb676467(v=exchg.150).aspx
    Additionally, to ensure external mail flow works well, we also need to configure send connector.
    For more information, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx   
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Microsoft Exchange is not updating local Outlook - Send and Receive issues.

    Hi everyone,
    Our office has just moved to using Office 365 business edition where we are sending and receiving emails via Microsoft Online Exchange. 
    It has been running for 3 days so far and we do love the product however we are having a major issue at the moment and that is our local outlook 2010 and 2013 folders are not constantly synching with the exchange.  We are finding that it can be hours
    before emails push through to our inbox and we will receive 20 emails all at once.  It is also occuring when we send emails, they will sit in the Outbox and the only way it seems to get them to send or receive is to close Outlook and re-open the program.
    We also find that sometimes when we are out of the office and using the 'Outlook Web App' that emails we send to clients via here and not always synching with the local Outlook its a bit of a mess really.  This is not great as we are a legal office
    and need to attend to emails urgently at times and must have all emails arrive locally.
    Can anyone shed some light on how this matter can be fixed urgently?
    Thanks
    Lisa

    Hi,
    As far as I know, for the sync issue in the on-premise Exchange server environment, we can check if we have selected the option ”send immediately when connected”:
    Outlook 2013: file>options>advanced> send and receive> send immediately when connected
    However, since your server is Exchange online, I recommend you ask for more professional help on our Exchange online forum:
    http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange Server 2013 - Send E-Mail

    I am very new to Exchange Server.  I managed to install 2013 and I can send e-mail on-premises with no problem.  When I follow what I believed to be the step-by-step instructions for connecting a Send Connector so I could send e-mail on-line I
    can't get it to work.  I set it up and try an e-mail and the e-mail just sits in the drafts folder forever (as in 2 days now).  I can't send any other e-mail now either.  They just sit in the drafts folder.
    Finally I try to delete the on-line draft message and it won't delete.  I delete the Send Connector and the draft finally will delete after nearly 10 hours.  I can again send on-premises e-mail but nothing else.
    Can someone be kind enough to step an old man through the exact process needed in order to set up and send and receive e-mail to the internet? 
    Greatly appreciated. 
    dave

    It looks to me like I'm going to have to give up.  I understand a lot of what you post, but I can't get the same results. (see my attachment).  I wish I had some step-by-step tutorials available that I could learn from instead of trying to
    fit bits and pieces of a puzzle together without having all of the pieces.
    Looking at my previous post.  Did I set up the DNS addresses properly on my Domain Server?  Am I accessing them correctly from the Exchange Server?  I don't know.
    Attached is a Word document that shows what I get when I follow your above instructions.  I can do the NSLOOKUP, set type=MX and then Rowley.xyz, but then nothing else is the same.  If I can't get the same results you do, then I can't go anywhere.
    Everyone had to start at the beginning and learn, but I'm totally lost now as to what would be the starting point and each subsequent step.
    Thank you for your assistance.  If I could get the answers to the DNS questions above I will try again from scratch.
    I realize it's not you, it's me, someone who is trying to learn something new without a "guide book" to work from and without a "mentor/instructor".   I have purchased and read several books on Server 2012 and Exchange Server 2013,
    just to get this far, but no further.
    dave

  • Exchange Server 2013 migration and high avalability

    Hello,
    We are using Office 365 online and will be migrating onto an in-house Exchange Server 2013 on a new Windows Server box.
    I have two questions:
    1. What is the best way to migrate everything from the Office 365 to the in house server? Do I setup a hybrid environment and then move the mailboxes and then remove the hybrid environment?
    2. What is the best way to setup high availability for the in-house Exchange server? I found out that in order to setup Exchange 2013 as high availability it needs to run on Windows server 2012 STD or Windows server 2008 Enterprise.
    Please let me know and provide links to step by step instructions if possible.
    Thank you, Karel
    Thank you. Karel Grulich, MCSE, SBS

    Hi Karel,
    Thank you for your question.
    In addition Ed’s suggestion, moving mailbox form Exchange online to Exchange on premise could be refer to the following link:
    https://technet.microsoft.com/en-us/library/jj906432(v=exchg.150).aspx
    Exchange 2013 high availability could be referred by the following link:
    https://technet.microsoft.com/en-us/library/dd638137(v=exchg.150).aspx
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Outlook gets 80040126 no connection to server on Send and Receive request

    Hi all!
    Last week I got moved from Hotmail to Outlook.com. My Outlook was/is hooked up to my hotmail address. Since then I cannot send emails. Receiving is still ok. How do I configure Outlook?
    Regards,
    Petter
    Petter Fryklund

    Hi,
    What’s the version of Outlook you are using?
    Which account type are you using for your outlook.com account?
    Please try to logon your outlook.com using web access and check if you can send email there.
    Also, please try to create a new mail profile and configure your account again.
    To create new mail profile, please refer:
    http://office.microsoft.com/en-in/outlook-help/create-an-outlook-profile-HA102749460.aspx
    If you are using Outlook 2010 or earlier version, have you installed the Hotmail connector? If you have, please uninstall it and reinstall it again. We can download it
    here.
    If you are using Outlook 2013, we can configure outlook.com account using Exchange ActiveSync. To do this, click the
    File > Add Account > Manual setup or additional server types > Next >
    Outlook.com or Exchange ActiveSync compatible service > Next > Fill all the information (Mail server is
    m.hotmail.com).
    Please let me know the result. Hope this helps.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Outlook 2013 send and receive setting

    Hi all,
    I have a strange Outlook 2013 problem. Occasionally, "Scheduled an automatic send/receive even XX minutes." setting in Send/receive page gets uncheck by itself. Sometimes, I notice that my emails are sitting in my outbox and when I check the send/receive settings, above
    setting is checked off.
    Has anyone else seen this issue and know of a way to prevent it from happening?
    Thank you.
    Ra 

    Hi,
    There are several possibilities that may cause this issue.
    1. A GPO setting may forbid the user to define Send/Receive Groups. If other users couldn’t check that checkbox, either, please verify with your administrator if there’s a Group Policy forbids that setting.
    2. The 3rd-party services/add-ins could also be the possible reason, let's troubleshoot this from running Outlook in safe mode, to determine if it is 3rd-party add-ins related:
    To start Safe Mode:
    Press win + R and type ”outlook.exe /safe” in the blank box, then press Enter.
    If there’s no problem in Safe mode, disable the add-ins to verify again:
    1. FILE > Select Options
    2. Under Options – click Add-ins and now you are able to disable Add-in for your Outlook
    3. Once you have disabled the unwanted Add-ins, restart Outlook to apply the change
    Feel free to post back. Thanks.
    Tony Chen
    TechNet Community Support

  • Exchange Server 2013 backup and restoration question

    Good afternoon
    I am wondering if I can pick people's brains here if that's not too much trouble.
    I have recently implemented an Exchange 2013 environment with 3 servers (two multi-role CAS & MBX physical machines, and one further virtual CAS server). Everything is working correctly and mail-flow is fine. My question relates to backup and restoration
    procedures. I am running a single Database Availability group with the two multi-role servers members of the this group and I have one Mailbox Database on the DAG, passive on one member and active on the other. Failover has been tested and this is functioning
    as expected.
    The backup environment I have implemented is as follows. I have utilized a separate Microsoft DPM 2012 server that runs a nightly Bare Metal backup on both multi-role servers with a retention range of 14 days and I have protected the DAG using DPM with a
    nightly full-express backup and 4 hourly syncs on one of the multi-role servers. Furthermore the Mailbox Database is protected, again nightly with a copy-backup.
    I am confident I know what to do should the mailbox database become corrupted or lost or need to be restored for one reason or another (it would just be a case of restoring the backed up mailbox database using DPM to a pre-created recovery database), what
    I am not quite so sure on is what I would do should I lose one or both of the multi-role CAS and MBX servers (the third CAS I am not so worried about as it is not used for incoming mail flow from the internet and we really only use it for ECP as we did not
    want to expose this to the internet). I wonder what process should follow to restore my Exchange servers (I know how to perform the Bare Metal recoveries using WSB) and what configuration would be required after restoring the Bare Metal backups.
    I know this is a reasonably long question but if anyone has any advice for me I would appreciate it greatly in the unlikely event something goes horribly wrong with my Exchange environment.
    Thanks in advance

    Hi,
    Yes, Most of the configuration settings are stored in AD. Mail data and personal related data are store in Mailbox DB. We just need to take consideration of these two points.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Weblogic server: how to send (and receive) mail directly

    Hi everyone,
    As the subject, I want to configure weblogic server to send ( and receive) notification message to user email address. Is it possible?
    Any suggestion is appriciated.
    Thanks.

    Hi Mr. Nimphius,
    I have created the mail session with the integrated weblogic server with the following properties:
    mail.debug=false;
    mail.smtp.password=xxxxx;
    mail.smtp.starttls.enable=true;
    mail.smtp.user=[email protected];
    mail.smtp.host=smtp.gmail.com;
    mail.smtp.auth=true;
    mail.smtp.port=587;
    mail.disable=false;
    mail.verbose=true;
    mail.transport.protocol=smtp;
    and here is the result:
    avax.mail.MessagingException: Can't send command to SMTP host;
    nested exception is:
    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    Do you have any ideas to resolve this Exception?

  • Recieve Connectors Exchange Server 2013 CU5

    Hello,
    I am running Exchange Server 2013 CU5, and the receive connector keeps timing out. The problem only exists after the server has been running for somewhere between 2 to 3 hours. After reboot all will work for the 2 to 3 hours and then we stop getting emails.
    If I run the Microsoft Connectivity test it returns error code 1, time out error, reboot the server and all is fine again for a while. I have tried deleting the receive connector & re-creating it as both a Hub connector and a frontend connector and it
    makes no difference. The fault originally occurred why I was running Exchange server 2013 Std, I they upgraded to SP1 then to CU5 in an effort to resolve the issue, but this did not work. Any suggestions would be welcome as I have no idea on what to try next.
    Thanks
    Curly

    The following error is what I get when I do an "Inbound SMTP Email" test. For the first hour after a reboot it will pass the test with no errors then sometime after the first hour I get the following message. Out going Emails work fine all the time just
    incoming. I have created a [email protected] email address, you are more than welcome to use for testing purpose. Also Thankyou for your assistance in this matter as I am at a loss on what maybe the problem so once again
    Thankyou.
    Attempting to send a test email message to @pvte.com.au
    using MX pvte.com.au.
    Delivery of the test email message failed.
    Additional Details
    The server returned status code -1 - The operation has timed out.
    Exception details:
    Message: The operation has timed out.
    Type: System.Net.Mail.SmtpException
    Stack trace:
       at System.Net.Mail.SmtpClient.Send(MailMessage message)
       at Microsoft.Exchange.Tools.ExRca.Tests.SmtpMessageTest.PerformTestReally()
    Elapsed Time: 100012 ms.

  • Exchange server 2013 change to web access url

    I have install & configure exchange server 2013 in my local pc. my ip address http://192.168.0.30/ecp but not access http://mail.test.com/ecp. and till i have purchased one mail so till i wants to my mail server access (send and received mail all mail
    id public and private) please send configuration url. 

    hi pardeep not sure if i understood well.. you have  private IP and you want to do send receive.. is that.. for the test you can do it but almost 90% or more, your mails will be sent to SPAMS.
    so if this is a test environment you can give a shot. let me know what kind of config you are looking for. below link will cover the config of exchange 2013. Let me know if you need more help.
    www.techieshelp.com/exchange-2013-step-by-step-configuration/
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Need information about Exchange server 2013 CU5

    Hello,
    Can anyone implemented Exchange Server 2013 CU5. I need feedback about this patch. Basically i will going to deploy this patch after getting best feedback.
    I'm waiting for your feedback.
    Thanks,
    Parvez

    Hello,
    Since the Exchange Server 2013 CU5 just be released, there is no detailed technet article or exchange team blog to verify some issues during installation. But I see a MCC who update a member in a DAG, there is no problem. If there are some issues, you
    can check the setup logs or event logs.
    Based on my known, if your environment meets exchange server 2013 prerequisites, and you follow the exchange server 2013 installation process, there should be problem.
    I recommend you deploy the patch on test environment firstly, and then apply it on production environment.
    Cara Chen
    TechNet Community Support

  • Exchange server 2013 upgrade

    Hi Guys,
    My current version is "Microsoft Exchange Server 2013 RTM" and I would like to upgrade it to CU1. But I could
    see that this is a major upgrade and it would cause some AD permission changes and schema update. I  also have an RD server and also a SharePoint server connected to the same AD. So, I'm a bit hesitant to do the upgrade an I fear that the permission changes
    would cause access problems to the users in RD server and SharePoint server.
    Could someone shed some light on this? Also, would there be any issues with this CU1 update? Could someone share the steps to perform this upgrade? The Mailserver and ClientAccess roles are configured on the same machine.

    Hi Nash Burns,
    According to the Exchange Team Blog (http://blogs.technet.com/b/exchange/archive/2013/04/02/released-exchange-server-2013-rtm-cumulative-update-1.aspx),
    CU1 grants Exchange Servers to make changes on msExchActiveSyncDevices class on
    inetOrgPerson objects.
    Another change in CU1 is about Monitoring Mailboxes.
    Before CU1, Monitoring Mailbox are created in default "<domain root>/Users" container. With CU1, Monitoring Mailboxes will be created in the "Exchange System Objects/Monitoring Mailboxes" container.
    In my organization, CU1 update didn't change any permissions on my RDS servers.
    One question : why don't you apply directely SP1?

  • Upgrade Exchange server 2013 to CU7 error

    Dear Microsoft Team
    I have Exchange server 2013 SP1 and upgrade it to CU5 it is working normal
    But wen I try to Upgrade it to CU7 I got this error massage
    Error:
    The following error was generated when "$error.Clear();
              $maxWait = New-TimeSpan -Minutes 8
              $timeout = Get-Date;
              $timeout = $timeout.Add($maxWait);
              $currTime = Get-Date;
              $successfullySetConfigDC = $false;
              while($currTime -le $timeout)
                $setSharedCDCErrors = @();
                try
                  Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
                  $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
                  if($successfullySetConfigDC)
                    break;
                  Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
                catch
                  Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
                Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
                Start-Sleep -Seconds 30;
                $currTime = Get-Date;
              if( -not $successfullySetConfigDC)
                Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
            " was run: "System.Exception: Unable to set shared config DC.
       at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
       at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
       at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
       at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
       at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
    Best Regards
    Rawa Zangana

    Hi Rawa Zangana,
    According to the error message, it seems that the Global Catalog not reachable from DC.
    Please perform following steps.
    1. Port 3268 listened on DC.
    2. Enable Global Catalog role on all DCs.
    3. Restart Exchange Server 2013 CU5.
    4. Check whether Event 2080 found on all DCs, Event 2080 means that AD connectivity works fine.
    5. Repeat CU7 installation.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Excahgne 2013 outlook 2010 don't update folders from exchange server, from owa send and receive is ok

    I have exchange 2013 server, with database for each department last week we have power problem, servers down 
    after servers goes on line, i have database with dirty shutdown, cant mount it, then i do eseutil/p, then i mount it, then all users access there mails from outlook 2010 they can send and receive, except one user cant receive new mail to outlook but he can
    send mails from outlook (in outlook the folder last update 22april), from owa he receive anew mails and can send,
    i try to delete outlook profile and create it again i get folder has not yet been updated
    i try to repair exchange database again, but the same problem
    i try to move it to another database or another server but move fail
    if i use outlook online (remove use cached mode) its receive new mails.
    Any help?
    Thanks

    Hi,
    What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
    If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
    Thanks,
    Simon Wu
    TechNet Community Support

Maybe you are looking for

  • How do i get a wifi connection between iphone and iMac?

    I downloaded the app "CityMaps2Go". Some of the maps I need are bigger than 20MB and Apple doesn't allow to download that amount over a regular 3G telephone connection. "CityMaps2Go" is asking me to connect via Wifi to download bigger maps. But I hav

  • Add item to list gives : 415 - Unsupported Media Type

    Hello, I would like to add an item to a custom list using rest API. The request gave me : Unsupported Media Type I am using the list custom type name (SP.Data.%name%ListItem) as type in __metadata following the information here : http://msdn.microsof

  • Change the value of order Person Responsible in bapi_alm_order_maintain

    Hi Expert, I want to change the value of person responsible in order Tab.  and also i want change Person Responsible for multiple order . How can i change ....  please  write code.

  • 7906 Stuck on Services

    Hi, I'm installing some used 7906 phones for some simple single line needs.  I've got something interesting going on though - the phones boot up and register fine but then launch the services screen.  If I press exit, or press the services button to

  • Show reports in MSS

    Hey guys, if I wanna display the workset reports under MSS I get the following error message: <b>com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Role: MSS instance: REP NOT_FOUND </b> What causes this message an