Exchange upgrade failing on Pre-Req check with error that a server is running exchange 2000 or 2003.

I currently have an Exchange 2010 single server running in the domain.
I beleive it was migrated from a 2003 exchange years ago, and that has been re-purposed.
When want to migrate to exchange 2013 and install a DAG, but on the readiness checks, it fails on the new server saying one or more server in the existing orginisation are running exchange 2000 or exchange server 2003.
The link says how to uninstall exchange, but it is not there any longer to uninstall.
I have been looking for how to clean up AD, but not finding anything definitive as to what to delete to have the install succeed.

Hi,
Please run the following command to check the Exchange server in your organization:
Get-ExchangeServer
Check whether there is any legacy Exchange server listed. We can double confirm the Excahnge server in the following path:
1. In ADSI Edit, navigate to Configuration >
CN=Configuration,CN=<domain> > CN=Services >
CN=Microsoft Exchange > CN=<Exchange organization name> >
CN=Address Lists Container > CN=Recipient Update Services.
2. In the result pane, right-click Recipient Update Service (Enterprise Configuration), click
Delete, and then click Yes to confirm the deletion.
3. Uninstall Exchange 2003 by using Add or Remove Programs from
Control Panel.
If there is no Exchange 2003 in your organization, please collect any error logs in Event Viewer for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Similar Messages

  • Warning while running pre-req checks for installing 11g binaries

    I am trying to install 11g binaries on my box for upgrading my production db from 10.2.0.4 to 11.1.0.7. I have dev and Prod running from the same box. I already upgraded my dev instance to 11g and its home is /opt/oracle/product/11.10/dev.
    I created another path for production as /opt/oracle/product/11.1.0/prod so that I can install the 11g binaries for production in there. When I run the installer, the pre-req checks gives me two warnings -
    Checking PATH environment variable...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The installer has detected that the PATH environment variable includes other ORACLE_HOME locations in it.
    Recommendation: Restart the installer after removing other ORACLE_HOME locations from PATH environment variable.
    ========================================================
    Checking LD_LIBRARY_PATH environment variable...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The installer has detected that environment variable LD_LIBRARY_PATH includes other ORACLE_HOME locations in it.
    Recommendation: Restart the installer after removing other ORACLE_HOME locations from LD_LIBRARY_PATH environment variable.
    I ran ther pre-req again after unsetting the PATH and HOME variable. But it still gives me a warning on the PATH variable. What should I do to avoid this warning?

    If I were you, I would have defined the HOMEs as "/opt/oracle/product/dev/11.1.0" and "/opt/oracle/product/prod/11.1.0" - that would eliminate the errors you are facing. It is still not too late - you can install the prod binaries as "/opt/oracle/product/prod/11.1.0", then later on "clone" the OH from "/opt/oracle/product/11.1.0/dev" to "/opt/oracle/product/dev/11.1.0" and delete the former.
    You could also simply clone "/opt/oracle/product/prod/11.1.0" from "/opt/oracle/product/11.1.0/dev" rather than running the the install/patching process all over again.
    HTH
    Srini

  • When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, why not 3G ?

    When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.

    The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
    Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
    Try turning off your firewall and anti virus software while you try to download the iOS update.

  • Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

    Hello Gurus 
    i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
    in the event viewer of the host:
    error id 21502
    'Virtual Machine xyz' failed to start.
    'xyz' failed to start. (Virtual machine ID number)
    'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
    number)
    'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
    number).
    error id 1069
    Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover Cluster
    Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    appreciate your help
    Ashraf

    Dear All,
    Subject : Need to create a file cluster
    in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
    Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
    Currently I am using Qlogic HBA (HP
    81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
    Unable to create vPort using  Microsoft
    Hyper-V (Win 2012 R2) & secondly using QConverge
    Console utility.
           When trying to create  Microsoft
    Hyper-V (Win 2012 R2), I received the below error.
    Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup. 
    Currently I am using the following latest version of Qlogic Firmware & Drivers...
    HBA - Running Firmware Version:  7.00.02
    HBA - Driver Version:  STOR Miniport 9.1.11.24
    If any body the same issue, Please could you update me as earliest.
    Regards,
    Mirza

  • Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Have a look at this it might help
    http://support.apple.com/kb/TS4148

  • Iphoto will not open I am asked to check with developer that iphoto works with this version of OS x I have followed all the steps recomended and reinstalle ILife but to no avail

    Iphoto will not open I am asked to check with developer that iphoto works with this version of OS x. I have Mountain Lion OS X I have followed all the steps recomended  by T Devlin in a previous discussionand reinstalle ILife but to no avail

    To reinstall iPhoto you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
    HD/Library/Receipts folder (10.5 and earlier)
    or from the /var/db/receipts/  folder (10.6) .
    or from the /private/var/db/receipts folder (10.7 or later)
    Then install iPhoto from the source it came from originally.

  • I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online.   Is there a way to do this?

    I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online.   Is there a way to do this?

    Hi John,
    Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
    Linda

  • Ewfmgr: Failed getting protected volume configuration with error 1

    Hello,
    I created a Windows 7-64 image for an Ivy-Bridge VME card. The image contains EWF with RAM-REG.
    The disk was divided into 2 partitions with the windows installer and the image was successfully installed.
    As I'm using RAM-REG, all
    the disk was allocated.  
    After the image was installed I tried to run "ewfmgr c:" and got the current status.
    Then I created a GHOST image and wrote the image on a new card with a clean disk.
    After Windows booted, running "ewfmgr c:" gave:
    Failed getting protected volume configuration with error 1
    I found few threads on this issue but failed to understand what is the right solution.
    Can you help ?
    Thanks,
    Zvika  

    The Problem is always Volumeid related (diskid)
    Explaination:
    Sysprep creates new bcd for the System. - Therefore it's recommended to use sysprep (and SID and so on..) but if you're lazy or don't have Domain Controller and so on or always use physical seperated (better not Internet connected) machines you would be
    totaly fine with non-syspreped Images. You only Need updated/new bcd.
    Captured wim has 'old' bcd (if there is no seperated MSR Partition) you can update this 3 entries within winpe and your Image will boot:
    bcdedit /store c:\boot\BCD /set {BOOTMGR} device boot
    bcdedit /store c:\boot\BCD /set {DEFAULT} device PARTITION=C:
    bcdedit /store c:\boot\BCD /set {DEFAULT} osdevice PARTITION=C:
    (boot could also be Partition=c: or all entries could be boot - and /store is not needed as in winpe bcdedit automatically Redirects the commands into the other/System (found) bcd. But i always recommand to specify the bcd store you want to edit, like in
    this lines)
    The definition of "C:" in this Parameter is 'translated' into volumeid/diskid. - So in the bcd is not "C:" it's some DiskID.
    Instead of the 3 entries you can just create a whole new bcd with updated volumeid/diskids. --> It would be enough to run bcdboot /s C:\ (or whatever the current boot (c:\) Partition is.
    EWF needs to be reconfigured as it also works with Volume/Diskids. So it needs additional command while running (online).
    ewfcfg /install-configuration for win7
    rundll32 ewfdll.dll,ConfigureEwf for win xpe/wes2009.
    Windows Embedded Developer and Scripting Guy //Germany (http://www.wesnext.com)

  • Failed to redeploy cardcath.war with error 256.

    The last time there was a code promotion for an application I was working on, an
    email with the following error message was sent:
    Failed to redeploy cardcath.war with error 256.
    Can anyone give me some information on 'error 256'? I need to find out why the
    application 'failed to redeploy'.

    How did you create your datasource, can you post the content, without passwords of course.
    Greetings.

  • Error OCCURRED: Failed to connect to LiveCycle server via RMI. Make sure that the server is running

    I have installed LifeCycle trial version .
    and trying to convert pdf to rtf
    using following initialization
    Properties connectionProps = new Properties();
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
    //Create a ServiceClientFactory instance
    ServiceClientFactory factory = ServiceClientFactory.createInstance(connectionProps);
    but i am getting error like following though i have started jboss which is inside lifecycle folder by run.bat
    ERROR IS:Error OCCURRED: Failed to connect to LiveCycle server via RMI. Make sure that the server is running and accessible to this client.

    May be you could use "netstat" or other tools like "ActivePorts" to ensure that ports established are correct.
    Also try if jnp://127.0.0.1:1099 works or not, if ports are correct.

  • JAEHYLEE  (R11i AOL)  Adpatch fails with Pre-req check

    Goal
    이미 적용한 patch를 Adpatch가 다시또 Pre-req로 재차 확인을 요청하는 경우가 발생할 경우
    Cause
    adpatch는 AD_SNAPSHOT_BUGFIXES table의 bugfix_id에 record를 가지고 있어여 하나 여기에 데이타가 없는 경우에 prereq check를 잘못할수 있다
    fix:
    adadmin을 사용하여 Maintain snapshot information을 수행을 권고 드립니다.
    Perform the steps :
    adadmin : Maintain Applications Files --> Maintain snapshot information
    --> Manage Snapshots within this Application System.
    You must run AD Administration "Maintain snapshot information" once
    for each APPL_TOP before you can apply any patch that contains a "
    compatible feature prereq" line on that APPL_TOP. Running AD
    Administration "Maintain snapshot information" for an APPL_TOP
    completely populates the APPL_TOP's current view snapshot. This complete
    information is required for the automatic prerequisite patch checking feature
    to give correct results.
    Reference
    245362.1

    Hi,
    Please run the following command to check the Exchange server in your organization:
    Get-ExchangeServer
    Check whether there is any legacy Exchange server listed. We can double confirm the Excahnge server in the following path:
    1. In ADSI Edit, navigate to Configuration >
    CN=Configuration,CN=<domain> > CN=Services >
    CN=Microsoft Exchange > CN=<Exchange organization name> >
    CN=Address Lists Container > CN=Recipient Update Services.
    2. In the result pane, right-click Recipient Update Service (Enterprise Configuration), click
    Delete, and then click Yes to confirm the deletion.
    3. Uninstall Exchange 2003 by using Add or Remove Programs from
    Control Panel.
    If there is no Exchange 2003 in your organization, please collect any error logs in Event Viewer for further troubleshooting.
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • Agent deployment from EM 12.1.0.2 to Linux agent failing pre-req checks

    Trying to deploy the agent software from EM to a Linux host running Oracle Enterprise Linux version 5.8 I am failing one of the pre-requisite checks indicating that the root / is not owned by the root. From the install log
    INFO: --------------------------------------------------------------------------------
    INFO: Checking AgentBaseDirCheck
    This is a prerequisite condition to test whether the agent base directory is owned by the install user, all the parent directories are owned by either the install user or root user and the root directory (that is '/') is owned by root user.
    INFO: The value of AGENT_BASE_DIR is:/opt/EM_Agent.
    INFO: The value of ORACLE_HOME is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0
    INFO: The command that is getting executed as part of this prereq is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/perl/bin/perl /opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/sysman/install/CheckDirPermission.pl /opt/EM_Agent
    INFO: Checking for proper ownership on the agent base directory.
    INFO: Checks whether the agent base directory is owned by the agent user oracle and that its parent directory is owned by either the agent user or root.
    INFO: ....
    INFO: Login name is : oracle & file owner is : oracle
    INFO: ....
    INFO: ERROR : root dir is not owned by root user.
    INFO: Check complete. The overall result of this check is: Failed <<<<
    INFO: --------------------------------------------------------------------------------
    Not sure how the / can not be owned by root.
    Filesystem Size Used Avail Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    220G 63G 146G 30% /
    /dev/sda1 99M 23M 72M 24% /boot
    tmpfs 2.0G 620M 1.4G 32% /dev/shm
    [root@tomintoul mapper]# ls -al
    total 0
    drwxr-xr-x 2 root root 100 Dec 4 11:42 .
    drwxr-xr-x 13 root root 7180 Dec 10 06:59 ..
    crw------- 1 root root 10, 62 Dec 4 11:42 control
    brw-rw---- 1 root disk 253, 0 Dec 4 11:42 VolGroup00-LogVol00
    brw-rw---- 1 root disk 253, 1 Dec 4 11:42 VolGroup00-LogVol01
    Any help would be appreciated.

    Hi,
    Please follow the document provided below which explains the issue.
    EM 12c: Agent Installation Fails With Error 'root dir is not owned by root user' (Doc ID 1380296.1)
    Regards,
    Venkat

  • Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

    Hi Guys,
    For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
    But when I try to check Pre-requisite from command line, everything seems to be ok.
    This is what the output...
    $ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "sph1erp"
    Destination Node Reachable?
    sph1erp yes
    sph2erp yes
    Result: Node reachability check passed from node "sph1erp"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    sph2erp passed
    sph1erp passed
    Result: User equivalence check passed for user "oracle"
    Checking node connectivity...
    Checking hosts config file...
    Node Name Status Comment
    sph2erp passed
    sph1erp passed
    Verification of the hosts config file successful
    Interface information for node "sph2erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
    lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
    Interface information for node "sph1erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
    lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
    Check: Node connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
    Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
    Result: TCP connectivity check passed for subnet "10.10.16.48"
    Check: Node connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
    Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
    Result: TCP connectivity check passed for subnet "10.10.0.0"
    Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
    sph2erp lan900:10.10.1.174
    sph1erp lan900:10.10.1.173
    Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
    sph2erp lan2:10.10.16.51
    sph1erp lan2:10.10.16.50
    Result: Node connectivity check passed
    Check: Total memory
    Node Name Available Required Comment
    sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    Result: Total memory check passed
    Check: Available memory
    Node Name Available Required Comment
    sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
    sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
    Result: Available memory check passed
    Check: Swap space
    Node Name Available Required Comment
    sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    Result: Swap space check passed
    Check: Free disk space for "sph2erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph2erp /var 13.8074GB 1GB passed
    Result: Free disk space check passed for "sph2erp:/var/tmp/"
    Check: Free disk space for "sph1erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph1erp /var 13.8158GB 1GB passed
    Result: Free disk space check passed for "sph1erp:/var/tmp/"
    Check: User existence for "oracle"
    Node Name Status Comment
    sph2erp exists(199) passed
    sph1erp exists(199) passed
    Checking for multiple users with UID value 199
    Result: Check for multiple users with UID value 199 passed
    Result: User existence check passed for "oracle"
    Check: Group existence for "oinstall"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "oinstall"
    Check: Group existence for "dba"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "dba"
    Check: Membership of user "oracle" in group "oinstall" [as Primary]
    Node Name User Exists Group Exists User in Group Primary Comment
    sph2erp yes yes yes yes passed
    sph1erp yes yes yes yes passed
    Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
    Check: Membership of user "oracle" in group "dba"
    Node Name User Exists Group Exists User in Group Comment
    sph2erp yes yes yes passed
    sph1erp yes yes yes passed
    Result: Membership check for user "oracle" in group "dba" passed
    Check: Run level
    Node Name run level Required Comment
    sph2erp 3 3 passed
    sph1erp 3 3 passed
    Result: Run level check passed
    Check: Hard limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp hard 63488 63488 passed
    sph1erp hard 63488 63488 passed
    Result: Hard limits check passed for "maximum open file descriptors"
    Check: Soft limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp soft 1024 1024 passed
    sph1erp soft 63488 1024 passed
    Result: Soft limits check passed for "maximum open file descriptors"
    Check: Hard limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp hard 3687 3686 passed
    sph1erp hard 3687 3686 passed
    Result: Hard limits check passed for "maximum user processes"
    Check: Soft limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp soft 3687 2047 passed
    sph1erp soft 3687 2047 passed
    Result: Soft limits check passed for "maximum user processes"
    Check: System architecture
    Node Name Available Required Comment
    sph2erp ia64 ia64 passed
    sph1erp ia64 ia64 passed
    Result: System architecture check passed
    Check: Kernel version
    Node Name Available Required Comment
    sph2erp HP-UX B.11.31 B.11.31 passed
    sph1erp HP-UX B.11.31 B.11.31 passed
    Result: Kernel version check passed
    Check: Kernel parameter for "ksi_alloc_max"
    Node Name Configured Required Comment
    sph2erp 32768 32768 passed
    sph1erp 32768 32768 passed
    Result: Kernel parameter check passed for "ksi_alloc_max"
    Check: Kernel parameter for "executable_stack"
    Node Name Configured Required Comment
    sph2erp 0 0 passed
    sph1erp 0 0 passed
    Result: Kernel parameter check passed for "executable_stack"
    Check: Kernel parameter for "max_thread_proc"
    Node Name Configured Required Comment
    sph2erp 1024 1024 passed
    sph1erp 1024 1024 passed
    Result: Kernel parameter check passed for "max_thread_proc"
    Check: Kernel parameter for "maxdsiz"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxdsiz"
    Check: Kernel parameter for "maxdsiz_64bit"
    Node Name Configured Required Comment
    sph2erp 2147483648 2147483648 passed
    sph1erp 2147483648 2147483648 passed
    Result: Kernel parameter check passed for "maxdsiz_64bit"
    Check: Kernel parameter for "maxssiz"
    Node Name Configured Required Comment
    sph2erp 134217728 134217728 passed
    sph1erp 134217728 134217728 passed
    Result: Kernel parameter check passed for "maxssiz"
    Check: Kernel parameter for "maxssiz_64bit"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxssiz_64bit"
    Check: Kernel parameter for "maxuprc"
    Node Name Configured Required Comment
    sph2erp 3686 3686 passed
    sph1erp 3686 3686 passed
    Result: Kernel parameter check passed for "maxuprc"
    Check: Kernel parameter for "msgmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgmni"
    Check: Kernel parameter for "msgtql"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgtql"
    Check: Kernel parameter for "ncsize"
    Node Name Configured Required Comment
    sph2erp 35840 35840 passed
    sph1erp 35840 35840 passed
    Result: Kernel parameter check passed for "ncsize"
    Check: Kernel parameter for "shmmax"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "shmmax"
    Check: Kernel parameter for "shmmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "shmmni"
    Check: Kernel parameter for "shmseg"
    Node Name Configured Required Comment
    sph2erp 512 512 passed
    sph1erp 512 512 passed
    Result: Kernel parameter check passed for "shmseg"
    Check: Kernel parameter for "tcp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "tcp_smallest_anon_port"
    Check: Kernel parameter for "tcp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "tcp_largest_anon_port"
    Check: Kernel parameter for "udp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "udp_smallest_anon_port"
    Check: Kernel parameter for "udp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "udp_largest_anon_port"
    Check: Package existence for "OS-Core-B.11.31( ia64)"
    Node Name Available Required Comment
    sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
    Check: Operating system patch for "Patch PHKL_38938"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
    sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
    Result: Operating system patch check passed for "Patch PHKL_38938"
    Check: Operating system patch for "Patch PHKL_39351"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
    sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
    Result: Operating system patch check passed for "Patch PHKL_39351"
    Check: Operating system patch for "Patch PHSS_36354"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
    sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
    Result: Operating system patch check passed for "Patch PHSS_36354"
    Check: Operating system patch for "Patch PHSS_37042"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
    sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
    Result: Operating system patch check passed for "Patch PHSS_37042"
    Check: Operating system patch for "Patch PHSS_37959"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
    sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
    Result: Operating system patch check passed for "Patch PHSS_37959"
    Check: Operating system patch for "Patch PHSS_39094"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
    sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
    Result: Operating system patch check passed for "Patch PHSS_39094"
    Check: Operating system patch for "Patch PHSS_39100"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
    sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
    Result: Operating system patch check passed for "Patch PHSS_39100"
    Check: Operating system patch for "Patch PHSS_39102"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
    sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
    Result: Operating system patch check passed for "Patch PHSS_39102"
    Check: Operating system patch for "Patch PHSS_38141"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
    sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
    Result: Operating system patch check passed for "Patch PHSS_38141"
    Check: Operating system patch for "Patch PHCO_40381"
    Node Name Applied Required Comment
    sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
    sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
    Result: Operating system patch check passed for "Patch PHCO_40381"
    Check: Operating system patch for "Patch PHKL_38038"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
    sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
    Result: Operating system patch check passed for "Patch PHKL_38038"
    Checking for multiple users with UID value 0
    Result: Check for multiple users with UID value 0 passed
    Check: Current group ID
    Result: Current group ID check passed
    Starting Clock synchronization checks using Network Time Protocol(NTP)...
    NTP Configuration file check started...
    Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
    No NTP Daemons or Services were found to be running
    Result: Clock synchronization check using Network Time Protocol(NTP) passed
    Checking Core file name pattern consistency...
    Core file name pattern consistency check passed.
    Checking to make sure user "oracle" is not in "root" group
    Node Name Status Comment
    sph2erp does not exist passed
    sph1erp does not exist passed
    Result: User "oracle" is not part of "root" group. Check passed
    Check default user file creation mask
    Node Name Available Required Comment
    sph2erp 022 0022 passed
    sph1erp 022 0022 passed
    Result: Default user file creation mask check passed
    Checking consistency of file "/etc/resolv.conf" across nodes
    Node Name Status
    sph2erp passed
    sph1erp passed
    The DNS response time for an unreachable node is within acceptable limit on all nodes
    File "/etc/resolv.conf" is consistent across nodes
    Check: Time zone consistency
    Result: Time zone consistency check passed
    Checking settings of device file "/dev/async"
    Node Name Available Comment
    sph2erp yes failed (incorrect setting for minor number.)
    sph1erp yes failed (incorrect setting for minor number.)
    Result: Check for settings of device file "/dev/async" failed.
    Starting check for The SSH LoginGraceTime setting ...
    WARNING:
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
    Check for The SSH LoginGraceTime setting passed
    Fixup information has been generated for following node(s):
    sph2erp,sph1erp
    Please run the following script on each node as "root" user to execute the fixups:
    '/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    What could be the issue ????
    Any help would be appreciated...
    Regards,
    Manish

    Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
    sph1erp:/oracle/11.2.0/grid #sh root.sh
    Running Oracle 11g root script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /oracle/11.2.0/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    OLR initialization - successful
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
    CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
    CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
    CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
    CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
    ASM created and started successfully.
    Disk Group OCRVOTE created successfully.
    clscfg: -install mode specified
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    CRS-4256: Updating the profile
    Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
    Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
    Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
    Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
    Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
    Successfully replaced voting disk group with +OCRVOTE.
    CRS-4256: Updating the profile
    CRS-4266: Voting file(s) successfully replaced
    ## STATE File Universal Id File Name Disk group
    1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
    2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
    3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
    4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
    5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
    Located 5 voting disk(s).
    Start of resource "ora.cluster_interconnect.haip" failed
    CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
    CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    Failed to start Oracle Clusterware stack
    Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
    /oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
    sph1erp:/oracle/11.2.0/grid #
    Last few lines from CRS Log for node 1, where error came
    [ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
    2011-02-25 23:04:16.491
    [oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
    erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    2011-02-25 23:04:20.521
    [ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
    */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    =====================================================================================================
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
    2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
    owing error:
    Start action for HAIP aborted
    ] for start for resource: ora.cluster_interconnect.haip 1 1
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
    2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
    2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
    2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
    2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
    2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
    2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
    2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
    2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
    [   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
    Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    =====================================================================================================
    2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
    2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
    2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
    2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
    2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
    2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
    2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
    2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    What could be the issue ????
    Experts Please help me. Doing setup for the PRoduction Env...
    Do response ASAP...... Thanks
    Regards,
    Manish

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • Exchange upgraded for Infinity, but online checker...

    Hi all, 
    not sure how simple this question is, but I'll ask it anyway as the online live chat with BT doesn't garner any useful info - they probably don't have it readily available. 
    I live in Fair Oak, and the exchange here, as well as Eastleigh, have been enabled for Infinity. Eastleigh is 2 miles down the road. My parents live in Eastleigh and they are able to get Infinity, but I'm not. The online checker states that it isn't rolled our here yet, but I know that Fair Oak exchange has been upgraded (again, another BT online checker states it has been completed already - as has Eastleigh)
    My question is this; how long after an exchange is upgraded are all numbers migrated to use the Infinity service? 
    Thanks

    Hi BET,
    If you fill out our contact webform (you'll find the link in my profile) and provide your full address and postcode I'll see what I can find out for you and get back in touch.
    Dean
    BTCare Community Mod
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for

  • Xorg crash when using konqueror, usually at random time

    Hi folks, For some time I've been experiencing Xorg crashes while browsing with Konqueror. This happens on both Webkit and KHTML. I use latest Xorg (1.9.2), catalyst-hook from AUR (built yesterday), KDE (4.5.3), my arch is x86_64. I have Flash plugin

  • Can I connect an external monitor on an HP Touchsmart 520 PC, using an HDMI to USB converter?

    I am attempting to connect a second monitor to my HP Touchsmart 520 all in one deskop PC, which does not have a VGA or HDMI port. The monitor has an HDMI cable, to which I have connected an HDMI to USB adaptor and connected to one of the USB3.0 ports

  • Skipping, stuttering Flash Video

    VIdeos on CBS and FOX, etc skip or Stutter. I researched this and Microsoft found that if the media buffers video but never loads the clip or loads the clip but the video stutters then your DSL/cable providers using Network Address Translation (NAT)

  • Hierarchial list display- multiple line selection

    hi all,     In my program I have multiple item field records under a header field.When I select some of the item record line and press a button on application tool bar the control should be transferred to a transaction code.     how can I accomplish

  • Resource report

    Dear All, in a process industry production takes place in different stages. For a particular stage let us say Blending there will be 5 phases where we use different resources. Instead of cretaing  5 resources in recipe i wish to go with one resource