Excise Duty is not gettig posted in accounting doc

Dear Experts,
In one of my excisable plant, in pricing procedure, excise dutyeducation cesshigher edu cess is calcualted on the basis of base value, which is coming fine. But our requirement is that base valueexcise dutyeducation cess+higher edu cess, combine value should come in Net Value field while making order & invoice. Because of the same reason, excise duty value is not posted in FI, accouting doc of the same is not generating as only base value accounting documents got generated. I have tried by changing the subtotal value but it doesn't work. Kindly help.

Dear Prashant,
Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

Similar Messages

Excise Duty (IS-OIL) - Invoice verification and accounting ED

Hello experts,
I have a case in my importation process with excise duty (IS-OIL). I have the following scenario: Purchasing Ed free material and receive it in ED paid Storage Location. So I use Handling type 00 and Valuation type TAX in the PO excise duty item data. I woul like to kwon Which is the standard process for the invoice verification of the excise duty cost when the handling type is 00 and the valuation type TAX?. And How can I do the invoice verification (MIRO) if there is not a specific line in the purchase order history for the excise duty cost?
I have another case in the accounting of movement type 301 (transfer posting between 2 plants). The accounting posting is the following:
Examle:
Account                       Transaction
1. STOCK FUEL          S                    BSX (Stock account)
2. STOCK FUEL            H             BSX (Stock account)
3. STOCK EXCISE DUTY     S             SVO (ED Account)
4. EXCISE DUTY FUEL           H             ZZP (ED Account)
The problem is that the 4th account must be STOCK EXCISE DUTY ACCOUNT from SVO transaction.
I would be grateful if someone could help me with these cases.
Thank in advance.
Pablo

Dear Prashant,
Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

Excise duty is not calulating

Dear All,
if i am creating sales order excise duty is not calculating.there is message which is i'm getting.No add. Vendor / Customer data maint. for -Please maintain J_1IMOVEND.
Regards
Ajit Jaiswal

in customer & vendor where we maintain Excise tax indicator.
Go to J1ID, select "Customer Excise details" and execute. There check whether the customer code is maintained there. If so, drag your mouse to right side and check "1" is maintained under the tab "Declared".
thanks
G. Lakshmipathi

Invoice is not getting posted to accounts it is showing the export error

invoice is not getting posted to accounts, it is showing an error of foreign trade / export data. where as it is with in the country. it is maintained for the plants abroad stock transport order.

A stock transport order to a location overseas etails crossing national borders and change of legal regulations. hence you need to maintina FT data. Please check the FT data in the billing header and item and maintian them. They are simple items like customs offices meas of transport...
This will give you a green status from the red status you will initially have. Then you can post the invoice.
regds

I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
we are not going through SD configuration and I mentioned evrything in Tcode J1ID

Chek SAP Note 951938 is applicable to you
Regards
Sanil Bhandari

Excise duty @10% not displaying in printpreview----SAP INVOICE

Dear experts,
Here in Sap invoice Excise duty @10% is not displaying in the printpreview. I tried debugging in Report program, but couldn't able to find the solution. so please give me the solution with step by step, Because am new to this one.
Thanks & regards,
selvakumar.

Hi ravi,
   Yes ofcourse am using smartform, Here in billing document(invoice) printpreview. there are some excise columns like edu cess,vat and all. The same ''excise duty @10%'' and the value of the excise duty also not displaying in the billing document printpreview.....I have debugged smartform nothing wrong with smartform. So there amy be some problem with the abap editor.
I have the conditions like Wa_final-exp ne intial
                                         Wa_final-fkart ne 'yrmf'
                                          Wa_final-fkart ne 'yctf''.
please let me know what is the problem in it.
Thanks & regards,
selva....................

Excise Duty is not captured in MIRO

Dear,
When we posting a vendor invoice against purchase order , It is not capturing excise duty ,
In part 1 excise invoice date is 31.03.2014 with the GR posting date 15.04.2014 and In part 2 posting was done on 16.04.2014.
we are facing this problem due to different excise year upated in table J_1IEXCDTL and J_1IGRXREF.
Please give us solution.
Br,
Swapnil

hi,
have you checked J1ID all entry for that material is exist and also check PO invoice tab whether tax code exist for that material.
Regards,
mukesh

Excise Duty is not calculating in Export Excise Invoice

Hi Experts,
Please help me out to resolve below scnerio:
When Client is creating a domestic Excise Invoice by Tcode J1IIN, then BED, Cess & HSCess is calculating properly. But in case of Export Excise Invoice by J1IIN only BED calculation is displaying, Cess & HSCess value is not coming. Kindly guide me how can i resolve this issue. Also explain me the exact process of Export Invoice with Excise configuration.
Regards
Mahendra Mhatre

Hi Mahendra,
I understand that while you are trying to post an Export invoice, you need to print excise invoice which is a legal requirement. But, in SAP the same should not be posted in any of the excise tables. I think there should be a small settings from SD side to restrict generating any accounting documents for the Export Excise Invoice. Can you please speak to the SD consultant.
Hope this helps.
Vikas.

Excise Duty Value not flow from J1IJ to VF01

Hi SAP Expert,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
But once i set, it will impact other billing document too. Please advise.
Thanks.

Hi,
I have successfully posted Excise Invoice at Depot using J1iJ.
When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
I analyse the pricing condition for condition type JEXP, below is what i got :
This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
There are different reasons for this:
1.The condition was deleted manually in the item condition screen.
2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

In dealer Invoice , Excise duty values not captured from MIGO

In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants. Old plants works good.
Regards.,
Lakshmanan.S

hi,
create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
change the base value in the migo and manually enter the excise duties in migo, capture it and then post
create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
Regards,
velu

Reg Excise Duty is not coming in the Excise invoice

Hi all,
We are doing STO senerio between two plants while doing commercial invoice the EXcise Duty ZMOD and ZCES is determining in the commercial invoice but when we do the Excise invoice in J1IIN the ZMOD and ZCES values are not comming.
So can you please assist to over come this issue
Please give replay ASAP,
Regards,
Murali.

Hi Alpesh,
Thank you for your replay I already checked that the A/R BED,SED CESS condition types are maintaining to that Tax procedure.
Can you please assist
Regards,
Murali.

SED (Special Excise Duty) column not available in J1IJ (Depot Excise INV).

Hi
I am creating Depot sale scenario. while creting Depot Excis invoice through J1IJ t-code there are column like BED,AED,ECss,SHEcss but there is no column for SED (Special Excise Duty). In my scenario I need to capture the SED .
I am able to capture the SED in RG23D register for Receipt part but for Issue part I am not getting this SED.
Please help.
Regards
Sivakumar

Hi,
Check again, There is a column for SED next to BED in J1IJ screen also.
Regards,
Brinda

Excise Duty Group not being populated during VL09 in MSEG-ROITAXGRPtable

Hi,
When we do the PGI (601 movement type), the data gets updated in MKPF & MSEG tables.During this process the details pertaining to ED group(field ROITAXGRP) are not updated in MSEG.
The above factor has the following connection to 602.
Subseqently when we do VL09 - the data pertaining to PGI (601) is imported from MSEG & hence ED group does not get populated as the system takes the material document of 601 to reverse the delivery document
We need to know the following things.
1. When we are doing delivery (Movt type 601) ,excise duty group gets updated in which field and table?
2. When we are reversing the document why in the MSEG table ROITAXGRP field (Excsie Duty Group) not getting updated.
3. Is there any User Exit which can be usd to populate this . We are using version 4.6c (IS-OIL) version ?
regards,

Thanks,
K.Kiran

Excise duty values not flowing from PO to MIGO

All SAP Gurus,
We have created a PO and used excisable tax code in it.
Excise duties are calculated correctly in PO.
When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
System allows us to enter the Excise duty values manually.
Further excise entries and register updates are happening correcetly.
We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
Please help.
Regards,

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

Excise duty values not floating to J1IEX_C

Hi all,
I created a PO with all Excise duties like BED, CESS, SECess etc..
When i try to capture the excise invoice i can see only Ecess and SEcess but not Excise duty( JMOP )
We are using TAXINN and duties were maintaiend thro FV11.
How to fix this.
Pl reply
Thanks
A.Gururajan

Check weather it comming for other material
if not comming
than check
check what is the condition type for 100% bed it would be JMX1
check in po if JMX1 is having value
IF value not there then chec ur tax procedure is the calculation is correct or not
if value coming
check in Maintain Excise Defaults
A/P BED cond should have JMX1
also check Classify Condition Types
TAXINN JMOP BED Set Off condition Percentage
TAXINN JMX1 BED Set Off condition Total
this 2 entries should be there
hope this helps

Excise Duty is not gettig posted in accounting doc

Similar Messages

Maybe you are looking for