Excise duty not reversed even after Excise Invoice is reversed

Hi Experts,
Please give me solution for  excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is reflected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
The cancell invoice should not appear for duty payment statement in the J2IUN.
Rgds
Shailesh W

Hello Sir,
I will provide u further details for this Issue.
This is to inform you that excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap & fresh Inv no 1000200214 dt. 06.09.10 is prepared .We have noticed that in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is refected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
As per our understanding,the cancell invoice should not appear for duty payment statement in the J2IUN.
You are requested to check the same at your end and let us know the reason for the same.
We are post the excise document in month of april 10 vid doc. no.10000021 dt. 02.04.10 7 10000057 dt. 10/04/10 and same is reversed vide do. no 1000074 dt. 02/04/10 &  25000003 .
While arriving the duty payble amount, we are found following discrepancy in J2IUN (Z-Report) & FBL3N (G.L) Account
Duty payble fig. As per J2IUN    Rs. 9482.00 (Basic)
Duty Payable Fig. As per FBL3N Rs. 7247.00 (Basic)
Diff. Rs. 2235.00
The diff. due to reversal of excise posting document not a/cted in J2IUN Report.
Rgds
Shailesh W

Similar Messages

  • Excise Duty not updating in Billing & Excise Invoice

    Dear SAP Guru,
    Kindly help me to solve 2 issue as mention below :
    1. Excise duty is not flowing in my billing document when i am creating commercial invoice. Also in my excise, I am getting excise duty 0.
    2. When i am creating commercial invoice, the net amount is showing me in dollars but at the time of creating excise invoice it should show me in Rs? Which is not happening.
    Please guide me what are the setting i have to check to fix my problem
    Thanks in advance.
    Also kindly send me the CIN Configuration along with the snap shot to my email id : [email protected]
    Thanks & Regards,
    Rajan

    > Dear Lakshmipati,
    >
    > Plant has been specified in the SO but still excise
    > duty is not flowing to my document.
    >
    > Thanks
    >
    > Rajan
    Dear Rajan
    You can check in the following
    1) In J1ID, select "<i>Excise Tax Rate</i>" and ensure that for the chapter ID, you have maintained 16%
    2) In J1ID, select "<i>Excise Indicator for Plant</i>" and ensure that for the combination of Company Code and Plant, "1" is maintained on the extreme right side.
    3)  In material master, select "<i>Sales: sales org.1</i>" and ensure that "<b>1</b>" is maintained for "<i>Tax Category - JTX1</i>".
    Thanks
    G. Lakshmipathi

  • Excise Duty not capturing in invoice

    Dear all,
    All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
    Regards,
    Raziq

    Hi Raziq,
    When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
    In this system will show the Excise Duty and it will post the below accounting Entry:
    BED Dr
    eCess Dr
    HECess Dr
    CENVAT Clearing Account Cr
    Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
    Please let me know if you are following above approach or not.
    Br,Vivek

  • Additional Excise duty not posting to G/L account

    Hello,
    While capturing excise invoice in J1IEX, i am entering following value as:
    Basic Excise duty: Rs.140
    Additional Excise duty: Rs.40
    Education Cess: Rs.7
    Sec.Edu Cess: Rs.1.4
    After posting follwoing accounting entries occuring:
    Basic Excise duty: Rs.140          Debited
    Additional Excise duty: Rs.40
    Education Cess: Rs.7                 Debited
    Sec.Edu Cess: Rs.1.4                Debited
    Cenvat Clearing: Rs.148.4(14071.4)  Credited
    In above  entries additional excise duty is not debited.
    Thank,s in advance
    Parag

    Hai,
    Please check the following in
    1. IMG - Logistics general - Tax on goods & mvts - India -  Basic settigs - Maintain Subtransaction type IP - ADC - Additional 4% budget 2006.
    2.IMG - Logistics general - Tax on goods & mvts - India - Account determaination - Speicfy excise accts per transaction. Here check for GRPO - Debit indicator - RG23AED Account.Check it for IP also.
    3.IMG - Logistics general - Tax on goods & mvts - India - Account determaination - Specify GL accts per excise transaction.Here check for Excise group - Excise transaction type - CoCode - Gl accts for RG23A or RG23C cloumn. CHeck it for subtransaction type IP also.
    The IP - Subtransaction type is used at the time of Import Purchase.

  • Excise duty not capured..?

    Hi gurus
    Can anybody giv  some inputs..
    I hav recd goods, excise duty not capured thru J1IEX, material was consumed,
    In this case how can i capture the excise duty after MIGO..?
    Please explain me some inputs..?
    Thanks
    sap-mm

    Hi,
    You can pass JV with transaction code J1IH by selecting "additional excise' tab.you can give the amounts and also excise invoice number
    regards.
    prasad

  • Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?

    Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?
    1.At the Time of MIGO,In Excise Invoice tab SECess Hide in reight side of the Screen
    2. At the time of J1IEX, Complete Input Excise SECess Line item is not appere in screen
    Please give the solution
    Regards
    Maran

    Hi,
    Please check following :
    1. Whether the AT1 indicator is active for Excise Registration number under CIN customizing
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations
    2. Whether the AT1 condition is maintained in Maintain Excise Defaults against tax procedure
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
    3. Whether the AT1 condition is maintained in Specify Excise Accounts per Excise Transaction against excise transaction type
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction
    4. Whether the AT1 G/L account is maintained in Specify G/L Accounts per Excise Transaction
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction
    5. Check whether in condition for AT1 is maintained in FV11.
    6. Check whether AT1 setoff percentage is maintained (this is applicable only in case you maintain setoff conditions).
    7. Check whether AT1 percentage is maintained in conditions tab of Purchase Order.
    8. Check whether tax code is maintained in FV11 for AT1 condition maintained.
    Please check and revert in  case of any clarifications.
    Regards,
    Tejas

  • Excise Duty Not appering in GR

    Dear all ,
    Excise Duty Not appering in GRn for PO  ,what may be the possible reasons ?
    Pl guide

    Hi,
    Pls check the J1ID
    1. Material maintained in J1ID for that plant
    2. Input and output material declared for the plant
    3. Vendor excise maintained
    4. Excise indictaor for the vendor maintained
    5. Plant excise details maintained in J1ID

  • Downpayment is not clearing even after invoice has been fully paid

    Good day to everyone,
    I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
    The order  related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!

    hi
    if you are doing vendor manual payment program then you clear down payment as below.
    T-Code-F-44 Clear down payment
    Select special gl indicator
    then press enter and clear down payment against invoice.

  • Price Condition&Price update are disabled in S.O even after partial invoice

    Dear All,
    We are using manual pricing condition in the Sales Order, when we do a partial delivery and billing for a Sales Order line item, the update prices function (button) is inactive and price conditions are greyed out.
    We are using Pricing Type "C" in the VTFL item copy from Delivery to Billing.
    Even after partial quantity invoicing from the Sales Order there will be pricing changes and users will need to enter manual price for the item that is partially invoiced.
    Currently system does not allow any change in the manual price condition as the all the price conditions are greyed out in the S.O even if partial qty of the line item is invoiced.
    Please let me know what needs to be done to enable manual condition entry and Price update functions in the Sales order even after partial invoice quantity of the line item in the Sales Order.
    Regards
    Venkat

    Hai Venkat,
    This is the standard functionality and system treat like
    sales order conditions once invoiced should be freezed.
    As a work around you can do like
    in sales order order
    Go to Item - Shipping
    Part.dlv./item     B      Create only one delivery (also with quantity = 0)
    Max.Part.Deliv.  1     
    This make only one delivery for the line item
    Considering if you have a material Sales order of 2 KG and you added some manual price.
    And you are doing partial delivery of 1 KG and Invoiced.
    Now user can use the same sales order and create a new line item of the same material and can enter the balance qty and change the condition which is not grayed out.
    Regards,
    Mani

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • Social App not working even after update from noki...

    nokia n8 social loading feeds.
    My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
    Its now the 4th jan and the phones still will not work even after and update from a socail app,
    nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds) 

    Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
    blitZkid
    Nokia C7: Running on Nokia Belle
    "If I'm helpful in anyway, a click of appreciation on the star would be nice"

  • The g, h and backspace on my keyboard are not working even after replacing with a new one.

    The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
    ...am waiting for a QIUCK RESPONSE

    How does a usb keyboard attached externally work?
    You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. 

Maybe you are looking for