Excise Duty values getting inventoriesed in MIGO but reversed in MIRO

Dear Experts,
I am using Taxinn procedure and while creating the PO the excise duty values are calculated properly but when I am posting the MIGO the stock value is posted along with the Excise duties. The excise invoice is captured & posted in MIGO itself and the values are posted correctly.
While posting the MIRO the excess amount is posted at the time of MIGO is posted back to the material. How do i fix this??
thanks in advance
Suresh

Hi Jayakantan/Ashok
thanks for the replies
I am using Taxinn procedure and the conditions are flowing from that procedure. In the purchase order i am giving the condition types only for basic price and freight.
As far as i know, the account key determines whether the condition type is cenvatable or to be inventorised. If i give the account key as NVV the values get inventorised. If i give the other account keys and assign the gl accounts to that account key that value will be posted to that gl account and not inventorised. Correct me if i am wrong or is there any other settings which will define so.
I have done the following settings as well for the condition types
spro>log gnrl>tax on goods mvmt>india>basic settings>maintain cond typs>classify cond types
and one more similar setting in the same path.
do i need to do anything further?
Suresh

Similar Messages

  • In dealer Invoice , Excise duty values not captured from MIGO

    In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants.  Old plants works good.
    Regards.,
    Lakshmanan.S

    hi,
    create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
    IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
    change the base value in the migo and manually enter the excise duties in migo, capture it and then post
    create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
    Regards,
    velu

  • Excise duty values not flowing from PO to MIGO

    All SAP Gurus,
    We have created a PO and used excisable tax code in it.
    Excise duties are calculated correctly in PO.
    When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
    System allows us to enter the Excise duty values manually.
    Further excise entries and register updates are happening correcetly.
    We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
    Please help.
    Regards,

    hi
    chekc following
    path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
    here give appripriate conditions for ur procedure as per BED   cess and other
    regards
    kunal

  • In import process,how excise base value is calculated in MIGO

    Hi expert's,
    In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
    waiting for your valuable response,
    Regards
    V.raj

    hi,
    we Tried with your following reply ! but still not finding exact value in base value .
    (MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
    thanks & regards
    V.Raj

  • Purchase order report with basic price and Excise duty values

    Hi All,
    Is there any standard report in SAP to get the Purchase order basic price / qty and its Excise duty values ? Since we are including Excise duties for non - codified items (w/o material master and with cost center 'K') Purchase order and the ed values are added to the cost and the requirement is to see the split up (Basic priceEdEcs+Hcs)for these Purchase orders for the vendors. If there is no std report then please let me know how to link Purchase order table with this Condition value table in query to get the desired report.
    Thanks in advance
    Benny

    Hi,
    there is no standert report to fullfill this requierment
    you have to create this report with the help of abaer
    for that which tax code you are using its importnat thing
    for po table EKPO
    1. A524 (Normal supply point / Material) it will return condition record number for condition type.
    2. KONP (Conditions (Item)) .
    3. J_1IMTCHID (Combination of Material Number and Chapter ID).
    4. J_1IEXCTAX (Tax calc. - Excise tax rates
    5 get the IR no. from RBKP and RSEG, and get the relevant FI doc no. and goto BSET table
    for IR number  to get from table apply logic for doc type RE ,you will get fi number nad in refernce field you will get invoice number + fiscal year
    Map this by refernig on po for which grn and invoice happen
    Regards
    Kailas Ugale

  • Roundong-off excise duty values

    Hi all!
    I need to round-off the excise duty values while passing it through J1IEX.
    I did the following,
    1. I have changed the rounding rule for condition types JMOP, JEC1, JSEP & JVRD as 'A'  (Also i checked with 'B' ) and
    2. In SPRO - Logistics general - Tax on goods mvt - India - Basic settings - Maintain Company code settings - Enabled rounding duty on payment for particular company code.
    But still while i capture and post the excise amount in J1IEX the values are not rounded-off. Can anybody give some inputs regarding this.
    Thanks in advance,
    Regards,
    Raj.

    For all the Conditions Keep the Rounding Rule Blank ie : Commercial then it will Work.
    >  In SPRO - Logistics general - Tax on goods mvt - India - Basic settings - Maintain Company code settings - Enabled rounding duty on payment for particular company code.
    This Setting is Correct.

  • Excise Duty Value in Export Invoice - Very Urgent

    Hi Gurus,
    I have created a Export delivery & Billing Documents. I am trying to create Excise Invoice in which Excise Duty values are coming as "0". We are using TAXINN Procedure ,  ECC 6.0
    Is there any specific note or any customization required for this ?
    Due to this ARE1 is also giving "0" values & subsequent "0" value in Bond Register.
    Can anybody help me on this ?  It is very urgent.
    Thanks in advance
    Vikas

    Hi Vikas,
    Could you help yaar ...if you got solution for it ..I am facing  same problem..We are going  live very soon,
    help of ur's could help me lot  ..My mail id [email protected]
    Thanks in advanec in for your help.
    regards,
    Vijay Khochare

  • Excise Duty Value

    Hi,
         Iam using TAXINN procedure. My customer wants to capture the excise value of the material while it is purchased from the First Stage dealer. While material is purchased from manufacturer we have definite exxcise duty percentage but when it is purchased from dealer he passes only the excise value for which he purchased.
    Dealer purchased price
    Material X = 1000
    Excise duty =100
    Purchased from Dealer
    Material X =1200
    Excise duty =100.
    The excise duty is 100 because the dealer can pass only 100 for which he purchased.

    Hi There,
    For the First stage dealer scenario you need to create the PO with duty + net price of the material, you can put the sum of thease two factors in Net price field at Po line item detail..
    Don't put any taxes on the invoice tab at item detail level of PO.
    That means taxes are zero.
    Now while doing the MIGO (GR) while capturing / capturing and posting the duties, at the item level for each lime item of GR enter the excise duties manually from the physical excise invoice.
    At the header level in excise tab, click on the radio button just near the option of capture and post excise duty at header level.
    Once in select the misclleneuos tab and click on the MRP (Maximum retail price), it will deduct the tax amount from the net price of the material.
    Hope it clears your doubt.
    Regards,
    Sujoy

  • Excise duty need to calcuate in MIGO from date of purchase order

    Dear Guru:
    Excise duty from this March has been change. We have the purchse order which is created in last month and vendor is also supply materil in last month. So Excise duty in Vendor invoice is coming 16% but when we are going to post GRN through MIGO, system is giving excise duty calcuation from 14%.
    Please suggest any note or setting in system so that for the time of GRN system will calcuate the excise duty from purchase order date not for GRN posting date.
    Thanks.
    Virendra
    09887603301

    Hi Virendra,
    You should have two condition records. Upto 29.02.2008 it is 16% and from 1st march it is 14%.
    Say GR done in february -->and if you are posting the Invoice now, system picks 14%. In MIRO change the posting date same as GR date, system picks 16% only.
    Say GR doing now --> if you want to post with 16%, post the GR with february date. If you want to post with 14%, post the GR with present date.
    Hope your query is clear.
    Regards,
    Sattuj

  • Excise duty not getting calulated in MIRO

    Dear  MM Gurus,
    User has caputured an excise invoice and entered a GR with reference to the excise invoice and posted excise invoice
    then user has reversed GR and without reversing(ie cenvat posting),he has made the GR.
    Then he has posted cenvat (part-II)
    Now during Miro,excise duty amount is not getting calculated
    also excise invoice shows, duty credit is not availed but it is inventorised.
    How to take credit and post MIRO ?
    Thanks & Regards,
    S.S.Reddy

    for excise calclated in miro
    check entry in
    img-logistic general-tax on good movement-india-basic setting-determination of excise duty_-maintain excise default_
    check urs tax procedure & condition here

  • Excise duty values not floating to J1IEX_C

    Hi all,
    I created a PO with all Excise duties like BED, CESS, SECess etc..
    When i try to capture the excise invoice i can see only Ecess and SEcess but not Excise duty( JMOP )
    We are using TAXINN and duties were maintaiend thro FV11.
    How to fix this.
    Pl reply
    Thanks
    A.Gururajan

    Check weather it comming for other material
    if not comming
    than check
    check what is the condition type for 100% bed it would be JMX1
    check in po if JMX1 is having value
    IF value not there then chec ur tax procedure is the calculation is correct or not
    if value coming
    check in Maintain Excise Defaults
    A/P BED cond should have JMX1
    also check Classify Condition Types
    TAXINN     JMOP     BED Set Off condition Percentage
    TAXINN     JMX1     BED Set Off condition Total
    this 2 entries should be there
    hope this helps

  • Error in excise duty values in RG1 register

    Dear All,
    While extracting the RG1 registers it has been found that values for Basic excise duties, Education cess and SH edu. cess are not appearing properly.
    I have verified the following
    1. There were 3 deliveries against which 3 separate invoices have been created. Against these 3 invoices, 3 excise invoices have been created. All the inoices are posted to accounting.
    2. Sales material as well as sold to and ship to parties are same in all the three invoices.
    3. Dispatch location i.e. plant is same for all 3 invoices.
    4. In J_1IEXCDTL table EXBAS as well as EXBED, ECS and EXADDTAX1values are appearing properly for all the 3 line items.
    But no values are coming for 2 line tiems; whereas correct values are coming in 1 line item in the Excel download as well script for RG1 register.
    Please help ASAP.
    Thanks & Regards
    Piyush

    Dear Lakshmipathi,
    All the 3 invoices are psoted to accounts. All the 3 excises invoices are also posted to accounts. Duty values are flowing properly.
    The problem is in the RG1 register extraction.
    BED, ECS and HCS values are displayed for line 1 but it is blank for remaining 2 line items.
    Thanks & Regards
    Piyush

  • Excise Duty Value not flow from J1IJ to VF01

    Hi SAP Expert,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
    Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
    But once i set, it will impact other billing document too. Please advise.
    Thanks.

    Hi,
    I have successfully posted Excise Invoice at Depot using J1iJ.
    When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
    I analyse the pricing condition for condition type JEXP, below is what i got :
    This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
    There are different reasons for this:
    1.The condition was deleted manually in the item condition screen.
    2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
    If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
    1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
    2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
    Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

  • Excise duty not getting captured for export scenario-Urgent

    Dear All,
    When I am creating the export sales scenario then excise component is showing in condition records, even while creating the excise invoice the excise component reflects in the invoice. But once the excise invoice is saved & i go to display of excise invoice then the excise components are coming as zero.
    During creation of excise invoice if i click on utilization button and come back on main screen without any changes, then also the excise component are getting nil.
    Can anybody please suggest the reason & solution for this.
    Thanks & Regards,
    Antima

    Dear Antima
    1)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations.  Here see for your Excise Registration, whether the box is selected for "AED" and "AT1".
    2)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Groups.  Here see for your Excise Group, the box is ticked for "Automatic Posting".
    I think somewhere your settings in this area (Tax on Goods Movements) is missing and I cant figure out exactly.  Anyway please check the above two areas.
    thanks
    G. Lakshmipathi

  • Excise duty value on sales invoice not reflecting in the actual cost

    Hi,
    we are paying excise duty, when we are removing material from plant for the particular project. Now excise duty paid is reflecting properly in the actual cost colunn of the the report s_alr_87013558. Secondly when we are rasing commercial invoice to the customer & excise duty paid earlier is recovered from the customer, now excise duty recovered from the customer is not being reduced from the actual cost.
    Cost elment for excise duty paid - 6101100, with category 1 - primary cos/ cost reducing revenue.
    Cost elment for excise duty recovered -  3801090, with category 11 -  Revenue.
    Kindly guide how to update(reduced) excise duty revocvered in the acutal cost.
    regards
    Sanjay

    Hi Mohan,
    Please use the formatting options to format ur question...!!
    Thanks,
    Tatvagna.

Maybe you are looking for

  • Problem with foreign key in entity bean in WSED..Plzzzzz help!!!!!

    hi all, m very new to ejb...m crerating container managed entity bean in wsed..The steps I have followed r as follows, i) created 2 tables in database,one is PARENT with fields ID(Primary Key) and NAME and another is CHILD with fields ID1(Foreign Key

  • Adcfgclone.pl dbTier gets error

    Dear all i made the cloning steps on DB and apps . preclone completed successful on db and apps and autoconfig and i created appsutil also newly. i made everything to make the post clone succeed .everything is good only not post clone. APPS : REDHAT

  • Standard Business Content - Loan Management & Term Deposit

    Hi ALL, I would like to does anyone has used Business Content Cubes on Loan Management & Term Deposit and its report, please advise me which cube appropriate Thanks BR Nathan

  • Need WLST for Weblogic portal domain 9.2.2.

    Hi, I am very much in-need of it. Can you please provide me the Need WLST for Weblogic portal domain 9.2.2. Actually, we are using weblogic 9.2.2 version. Actually, I created a portal domain configiuration using configuration wizard and the same I do

  • Access/SQL to PDF data binding question

    Hello, The goal = Using an access form, fill out fields which populate a table on the sql server. Open a PDF and data bind the fields to that table. Lock the fields with the correct information. Then send to an individual with read only data that is