Excise invoice number showing display option in J1IEX change mode.

Hi CIN Experts,
We are using E.C.C6.0.
In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
In 4.7E system showing the change option in T.code: J1IEX change mode.
Regards,
Hanuman

We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
It is SAP Standard & to break this you would need the access key from SAP.
If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
Thanks & regards
Hameed Parvez

Similar Messages

  • Excise Invoice number not display in case auto generate

    Dear Experts,
    we have use auto excise invoice generation functionality, it is working properly, but only Excise Invoice number not display after saving billing document. what to do for display the same after saving billing document.
    Regards
    BK GAIKWAD

    Thank you Lakshmipathiji,
    My question is when we have create excise invoice through J1IIN excise invoice number has been display in bottom line after saving billing document.
    But in case we have creating  auto generate Excise invoice, Excise Invoice number not display in same screen. How to do to display excise invoice after saving billing document.(Excise invoice generating in background but number not display in same screen)
    We have changeover manual to auto generate excise invoice system.
    Regards
    BK GAIKWAD

  • FBL5N_Excise Invoice Number not display

    Hallo Experts,
    I am SD Consultant, when  after create the Excise invoice, number will be display in FBL5N_Customer ledger (Ref. key 3 field)  but only 10% cases it will not display with same customer / Excise group / series group
    I am unable to address it. please help
    Regards
    BK GAIKWAD

    Thank you Lakshmipathiji,
    My question is when we have create excise invoice through J1IIN excise invoice number has been display in bottom line after saving billing document.
    But in case we have creating  auto generate Excise invoice, Excise Invoice number not display in same screen. How to do to display excise invoice after saving billing document.(Excise invoice generating in background but number not display in same screen)
    We have changeover manual to auto generate excise invoice system.
    Regards
    BK GAIKWAD

  • Display Excise Invoice Number in F-28 & F-26 Transaction.

    Hi Guys,
    My FC wants me to modify the standard SAP programme to display the Excise Invoice Number in F-28 and F-26 transaction.
    I modified the programme, but its is not working.
    So Please help me.
    Thanks in advance.
    Regards,
    Vijay Wani

    Hi Vijay
    Noneed to modify the STD SAP program.Just try the SPRO setting (which generally FC do).There find the screens for transaction F-28 and F-26 and then there u can add or remove any fields on the screen.Dont try to change std SAP prog.
    Award Pts if helpful
    Regards

  • Show Excise Invoice number in Doccument flow

    In Our sale Process After Billing doc we create Excise Invoice(in CIN).I wan to show this Excise Invoice number in Doccument flow.wats the required config for this.

    Hi,
    This is not possible to show the excise invoice in document flow at sales order/ Delivery/Billing as per standard.Use transaction code J1IDOCFLOW . Or write a query/report by adding the tables VBFA, VBRK and J_1IEXCHDR with VBLEN = VBLEN = RDOC
    Regards

  • Excise Invoice number and Internal Number

    Hello Friends
    I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
    1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
    For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice  number
    2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
    3) When do we require updating of register ,is it done on daily bases, and  how can we see the entries of RG23A part 1.
    4) We have excise invoice number  range of posted ,in process and cancel documents which is  assigned to GRPO transaction type, while running J1I7 though we select last option   part 1 posted  and part 2 not  posted, still the system shows the cancelled documents, How can I avoid  the cancel documents
    Thanks
    Siddharth

    1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
    For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
    -->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
    2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
    --->> there is no relation between grpo vs. ex inv nbr
    3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
    >> u can see in J1I7 or thru table J_1IPART1
    4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
    >> wait for others answers..

  • BED is not calculating values after enter Excise Invoice number in MIGO

    Hi,
    We are doing a process of MB01 --> J1IEX --> MIGO.
    At the time of J1IEX, we entered the Excise Invoice number and date. After that when we change the quantity, then BED is automatically change.
    But at the time of MIGO, when we enter the Excise Invoice number, then BED is not calculating as calculated in J1IEX earlier.
    This was working fine before apply the Patch. I think this is due to Patch because in our Development system still working fine but we have apply the Patch in Quality Server..there this problem comes..
    Please guide what should be configuration changes has been done after apply the patch.
    Applied Patch is: - SAPKH60015 & SAPKH60016..
    Plz guide..

    hi
    i think your doing something wrong
    i think first when u did j1iex then in MIGo u have to go for ONLY REFER INVOICE option
    better you go for other process
    DO GR for required quantity say 5 out of 10 without excise
    then do J1iex  with reference to GR number
    regards
    kunal
    Edited by: Kunal Ingale on Jul 28, 2010 9:15 AM

  • Depot Excise Invoice number skipped ???

    Hi Everyone
    For Ex. say our depot excise invoice number range is from 1to 100, assuming the current number is 51. Some day back there was a jump in the depot excise invoice number range. In between 1 and 51 the number "25" is missing.
    So the excise department has asked the company as to why we have skipped the number 25.
    I have checked the table J_1IRG23D, but the skipped excise invoice number is not appearing in the tables, I mean it says "No table entries found for the specified key"
    Our Company wants to know the exact reason as to why the system has skipped the depot excise invoice number "25".
    Whether it is the system mistake or user mistake or some body else fiddling with the system.
    Please offer you valuable suggestions to solve this problem
    Thanks & regards
    satish

    Hi,
    SAP 99.9 % will never skip the number range on its own.
    As per my understanding:
    1.Some one has manually deleted the Depot Excise Invoice number after creation (due to the user mistake at selecting the 
      appropriate Incoming Excise invoice, Price , material or etc reason. And while creating the New Depot excise Invoice Number  
      he forget to adjust the number range at object 'J_1IDEPINV' for corresponding Series Group. This u can confirm by checking
      the entry at Item level, instead of Header at it will not show that entry.
    2.May be due to the Depot Sales Returns for respective Depot Invoice canceled and Deleted by the user.
       Here, deleting the excise Invoice is not Valid practice as per Excise Tax rules of GOI.
    3. Kindly check, whether Number Range Changes happend for respective Series Group between the Fiscal Year 2010-11.
    Please feel free to correct me and It will be a value addition if you find any other solution.
    Thank You,
    RB

  • Excise Invoice number not dispaly in ledger (FBL5N)

    Dear Experts,
    Generally Excise Invoice number display in customer Customer Ledger (FBL5N) IN Reference key 3 field. But  In some cases it is not display.  Please share possibility.
    Regards
    BK GAIKWAD

    Hallo Sir,
    Please ignore my Previous replay,
    Actually when invoice is released for accounting entry (VF01) 90% of Invoice number  have been display in FBL5N Ref. key 3, but only 10% invoice number not display with same customer / Excise group / series group. some issues.
    I am unable to address it. please help
    Regards
    BK GAIKWAD

  • Excise Invoice number range not being picked by crystal reports

    Hi all,
    We have a Crystal Report that generates the Invoice document based on the invoice number which is an input a parameter. The report is built on 'SAP Table,Cluster or Function' type connection. The Invoice numbers are updated into the source system. Current invoice series is *****0001,.....****0052,****0053,****0054.............****0100......****0111,****0112,*****0113.
    The problem is that the Crystal Report is working fine till ******0111 but it is returning a blank values for Invoice numbers ******0112  and others following. We checked the data in the SAP system and the details for Invoice Numbers ******0112 and others are available in the SAP system.
    While i select the Excise Invoice number field of the corresponding table and clicking on browse data it is showing invoices upto ******0052.
    Please help.
    Thanks and Regards,
    Raja.N

    Hi
    is this data coming from a single table or are joins involved ?
    did you try a report simple on a single table to see if the data would be returned ?
    ingo

  • Excise Invoice Number column in T code FAGLL03

    Hi All,
    In the standard SAP Report (T code FAGLL03) G/L Account Line Item Display,client wants Excise Invoice Number column.
    We have brought the Billing Document Number for G/L account reconcilation.
    Please help me out for the above.
    Regards,
    Hemant Patil

    Hi Alpesh,
    Thanks for your reply.
    I will try the same.
    Regards,
    Hemant Patil

  • Excise Invoice Number in FBL5N

    Dear All,
    In FBL5N only Billing Document number will come. But there is no provision for Excise Invoice number. Same way at the time payment receipt from customer there is no provision for Excise Invoice number in the layout. But Customer will make the payment against the Excise Invoice Number.
    Is there any Setting or User Exit which will automatically copies the Excise Invoice Number in Reference Field of Billing (Accounting) Document. So that it will be shown at the time of FBL5N or Customer Payment.
    If you some solution it will be helpful for me.
    Regards
    Sreenivas

    check in config:
    The special field has to exist in table T021S. Check if this is the case by using the following path:
    Transaction SPRO -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Customer Accounts -> Line Items -> Display Line Items -> Define Additional Fields for Line Item Display.
    check Note 215798 - FBL*N: Special fields are not displayed
    Few other notes..207436, and 300550.

  • Excise Invoice Number through Purchase Order no. or Material Document no.

    Hi,
    Is there any report through which I can find Excise Invoice Number (J1IEX) with the help of either Purchase Order no. or Material Document no.?
    Can anyone provide some idea in this regard?
    Thanks in advance

    Using transaction code J1I7,You canfind excise invoice no in report,with purchase order no. or Material document no. as inputs.

  • Change mode of the excise invoice is showing zero excise values

    H ifriends,
    The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
    While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
    Thanks
    Sasi

    s

  • Excise Invoice Number

    Hi Sap Guru
    Can u elobarate explanation regardind  this. I need Can i get the Excise invoice number or Bill Number  in FBL5N open item report without development. If yes/No, Can u guide me how to resolve this.
    Its Urgent,
    Thx in Advance
    Neha

    Hi,
    In Change Layout --> Hidden Fields: Billing Document.
    Best reagrds,
    Amit.
    Note: Also, Column: Document No (Sort it by Type: BL)

Maybe you are looking for