Excise register report

Hi all,
I want to get the report for RG1, RG23A Part 1 and Part 2, PLA.
Can anyone tell me where i can see all the report.
If there is any standard T.code, please give me.
Thanks in advance,
Regards,
Babs

Hi,
Please use the transaction J2i5, in this transaction you extract the register you select and then in transaction J2I6 you can get the actual output.
Refer the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm

Similar Messages

DAILY EXCISE REGISTER REPORT

Dear expert
I am beginer in sap,and working on sap 2007b,
i want a report for daily excise register which formate is as
(date Op.Balance PurchaseQty jobworkQty ProductionQty Total SaleQty JobWorkQty ProductionQty Total ClosingBal)
Please help me
Regards
Anand Kumar Pandey

Hi Anand.....
Are you aware about XL reporter provided by SAP?
When you login to SAP go to Addon Manager and run XL Reporter.....
Then Go to Tools and there you find XL reporter option. Open this and Import the XL file for DSA.....
You can find this DSA XL File in SAP Source Setup and Package folder Indian Legal Reports.....
Regards,
Rahul

Excise Register In XL Reporter

Hi Guru's,
When am trying to generate a report for RG23A-PART - I RG23A-PART - II RG23C-PART - I RG23C-PART - II in XL Reporter it will not display any values from B1.
But In my B1 i alredy posted too many purchase order and sale order for excisable Item.
and i also assigned the Chapter ID for the corresponding Item.
So,How can i check it where can i fetch the data in B1.
Plz Guide me am new to B1.
Regards,
Guru

Thank U Gordon.
I already refered this thread and completed all these process,
1. Some of Items in Item Master are marked as 'Excisable'. (Item Master -> General Tab -> You can find 'Excisable' Check Box at the RIght Bottom.
2. Check of 'Material Type' and 'Chapter ID' are mentioned for the items that are marked 'Excisable'
3. Check if you have values in the 'Adminstation -> Setup -> Financials -> Tax -> Excise Register Numbering'. See if there are values in 'First No', 'Next No' columns.
4. Check if you had done some Purchase or Sales or Inventory transactions for the Items that are marked 'Excisable'
Even though the data's not coming in xl reporter.
Is there any way to check the Excise data available in SAP B1.
Tell me the corresponding tables.
Thanks in Advance,
Guru

Vendor Excise Details report

Dear All,
we required Vendor Excise Details Report,which maintain in J1ID.Like ECC no,Excise renge no,CSt , VAT no ,PAN no ...etc
Regards,
Dishant

Certain vendor excise details(chapter id,ecc no,excise regn) were available in J2I9 along with transactions
or otherwise develop Z report using J_1I* tables.

Purchase Register report in SAP BI

Dear All,
Please suggest me any standard Purchase Register report is available in BI or how to achieve this requirement in BI.
Please let me know process.
Thank
Regards,
Sai.k

Hi,
while there is always a new requirement, one needs to discuss with the functional consultants and find out which tables are being used which may fulfill the scenario. We also need to identify the list of characteristic and Keyfigues the client wants to analyze.
Also SAP Help is a good source to find more of a standard stream lined objects. Need to analyze if standard objects satisfy the requirement or customization is required.
Please perform the steps as Rama has suggested...
thank you

Purchase Register Report

Hi Friends,
I need to develop the Purchase Register Report with Vendor details, TIN number, Invoice details, E1 purchases with purchase base value and VAT and CST percentages. But Iam new to the Purchase module. I know the basic tables for purchasing. but can anybody guide me the tables for TIN number with VAT and CST percentages and how to proceed?
Thanking you in advance
Regards,
Murali

I don't know the fields but a few pointers that might be helpful:
1) Ask your functional analyst - it's part of their job to provide you with the field location or any guidance on that
2) At least someone should be able to point you where the fields are on the screen. Then you should be able to go the usual route - F1 -> Technical info, etc.
3) Respective functional forum might be a better place for such questions if for some reason p. 1 and 2 above are not feasible.
4) You can always use SQL Trace (ST05) to find where the information is being read from or written to. Start the trace, run the transaction, stop the trace and analyze the list. Voila - no need to ask anyone ever again.

Purchase Register Report issue

Hi,
I am working Purchase Register report.
In this, we have a PO with 10 Quantity. But at the time of MIGO we receive 5 qty out of 10.
Now how can we pick the amount according to 5 qty received from MIGO because we want show MIGO condition in our report not from PO.
What should be the table link for this...
Plz guide..

As per ur reference: -
In PO, Condition are like--- PO Qty is 10
Basic Amount..........1000
taxes.........................100
Freight.........................50
Other...........................20
and we have receive only 5 qty out of them, means all the condition amount will be 50%. like...
Basic Amount..........500
taxes.........................50
Freight.......................25
Other.........................10
all condition will be calculate according to qty 5 not for 10 as showing in PO..
I want to pick these condition. (according to 5 qty.)..
Now suggest...

Purchase register report problem

Hi experts - please help
we have a requirement to create a purchase register for material from PO- to Invoice.
we have PO number -> GRnumber -> Invoice number in our rows . In our keyfigures we have PO Quantity, PO value , GR quantity,GR Value, Invoice quantity and invoice amount .
Becoz of invoice and GR number relationship which is m: m in our report we see that the key figure values are showing up like
for 1 purchase order multiple line items , with multiple gr's, with multiple invoices , becoz of which we see PO quantity field showing like say if it is 30 for 1 PO it is showing 30 for all the invoice numbers in the report which not want , the same case is with Gr quantity and invoice quantity
PO.no / po item / gr no / inv number / po quanitity / po value
1000/10,20,30,40/1000/2000,3000,4000,5000/ 30,30,30,30,30/ 120,120,120,120,120
this way for 1 PO the report is showing same po quantity based on say if 10 invoices it is showing same P0 Quantity 10 times which is not want and the result row shows up (POvalue *10).
how to get rid of this situation..
please suggest any way if anyone has done a similiar report..
any documents related to such purchase register report is highly appreciated.
thanks & regards
krishna

Hi Krishna,
Your PO DSO will have records like this.
PO      Item    POquantity GR Quantity
PO1      1           100              35
Your GR DSO will have information as shown below.
GR Doc      Item      Posting date   GR Quantity   PO     PO Item
DOC1           1         01.07.2011          20            PO1       1
DOC2           1         10.07.2011          15            PO1       1
If the report is based on PO, ( Document date of PO ), then you can show information from the first DSO. If the user wants to have the details of GR documents that constitute GR quantity of 35, you can create a 'Jump to' report on the second DSO and in the RRI Connection map the PO and Item numbers.
This way you will be able to store the information at different granularity and combine them in reporting.
Hope this explains,
Thanks,
Krishnan

(Invoice register Report – Payment Register report = Aging Report)

Hi,
The total balance for Invoice registers report “minus” the balance for Payment register report not give me the balance of Invoice aging report
The expected behavior:
It must minus the balance between the two reports equal to invoice aging report
(Invoice register Report – Payment Register report = Aging Report) But this not happen
What the issue causing for that ?
Thanks

Hello.
I think you cannot expect that calculation to be correct. Just to mention Payment Register, this report does not have a total in the functional currency.
The following excercise is true:
Ending Balance of Accounts Payable Trial Balance on period 1 + Posted Invoice Register on period2 - Posted Payment Register on period2 = Ending Balance of Accounts Payable Trial Balance on period 2
Octavio

Financial Tax Register Report shows No Data Found

Hi All,
We are upgrading from 11.5.10 to 12.1.3, ofter upgrading to 12.1.3 when i running the Financial Tax Register Report it is showing No Data Found.
Please reply me ASAP.
Regards,
Raju.

Hi,
For your references i posted the log file of financial tax register report.
E-Business Tax: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RXZXPFTR module: Financial Tax Register
Current system time is 15-FEB-2013 09:38:25
Publishing concurrent program ZX : RXZXPTEX.
Request 487766 submitted.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Current system time is 15-FEB-2013 09:38:25
Request restarted at :15-FEB-2013 09:38:27
Publishing concurrent program ZX : RXZXPTEX.
Publishing request ID 487766.
Its a BIDI char set
Its not a BIDI language
FA_RX_SUBMIT_PURGE (PURGE API PROGRAM NAME =ZX_EXTRACT_PKG.PURGE) (ROWS PURGED =0)
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
36093
------------- 1) PRINT   -------------
Printing output file.
Request ID : 487765
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 15-FEB-2013 09:38:28
---------------------------------------------------------------------------

AP register report with PO and related invoices

Hi SAP gurus,
Business wants a AP register report, listing all processed invoices related to a PO.
Basically they want to see the PO no. and invoices on the same report.
I have tried to find a std report but couldnt. Please suggest if there is any such report or if not how I can get it thru may be SAP query. Also please give me step by step procedure to right a SAP query.
Thanks a million, in advance. I will reward point promptly.

If you want to do this from Finance an idea is to make sure the PO number is being written to the assignment field of the Vendor line item.
This can be done simply by making the correct selection for the sork key of the recon account for Vendors.
Once you are happy that the PO number is being added into the field, you can run an open item report per Vendor and sub total it by Assignment, thus giving you a break down by PO number.
Please award points if this is helpful.

Transaction Register Report not printing Correctly

Hi,
In Accounts Receivables Transaction Register Report is not printing correctly..
Once I issue print job for Transaction Register Report...Blank page is coming..
what is the cause..please suggest

Does the print work properly with other reports? If so, I suggest you run the report in debug mode. Please check (Note: 226013.1 - How to run AR RXi reports in debug mode) for more details.
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=226013.1

Applied Receipts Register Report in AR - RXi Report

Hi Fincon,
I have a client requirement wherein we need to customize the Applied Receipts register report in AR. After analyzing program andd the executable we discovered that the report is an RXi report spawned from a plsql program.
From the SQL Trace analysis, we found that the report is not doing anything different from what a normal rdf report would do. Can someone throw me any lights on why is this report an RXi report? Has anybody done any customizations on this report? Were there any challenges in customizing this report? How was the customization of this RXi report done?
Thanks.
Srini.

This has to be customized using :Oracle Financials RXi Reports Administration Tool, but it's not that flexible.
http://download-east.oracle.com/docs/cd/B25516_11/current/acrobat/115finrxi.pdf

T.code for excise register closing

Hi All,
What are the T code for excise register closing. can any one tell me the step by step closing T code in sap.
thanks in advance
points will be given.

Dear Gopi,
You can use the transaction SM30, table V_T001B or by SPRO Financial Accounting -> Financial Accounting Global Settings -> Document -> Posting Periods -> Open and Close Posting Periods.
Also, check the transaction F.16.
Thanks and regards,
Paulo eVARISTO

CVD and Excise Register Update for Free of charge Imported Material

Hi,
This is a scenario of Import Purchasing of Free Goods for which no price is paid to the Vendor. But the Custom and CVD Payment need to be made and we want to take benefit of CVD duties and update the Excise Register.
Can anyone provide some idea to resolve this?
Thanks in advance

While trying to post Excise Invoice Value in J1IEX without Purchase Order I am getting an error "GL account has not been assigned for RG23ASED in customization"
Does it mean G/L account needs to be assigned against EWPO for RG23ASED in customization or something is going wrong?
Because I havenu2019t put any duty value under SED in J1IEX.

Excise register report

Similar Messages

Maybe you are looking for