Excise Tab is not  appear in the MIGO display  --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against  the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Similar Messages

  • Excise tab is not appearing in Import of STO material-MIGO display

    Hi Guru's,
    Excise tab is not appearing in Import of STO material-MIGO display.
    Find the Process steps below.
    1)Stock transfer order using NB document type-(Company codes are different)
    2)VL10B
    3)VL02N-PGI
    4)Customs Invoice in Indian rupees.
    5)Capture excise invoice-J1IEX(Capture excise invoice w.r.t PO not STO)
    6)Goods receipt with Reference excise invoice(Excise tab appearing while posting goods) MIGO
    7)Post Excise invoice--Accounting entries everything is correct.
    After posting the MIGO when we display Material document in MIGO, excaise tab is not appearing for this scenario only.Rest of all Excise tab appearing.
    Note:In J1IEX display of excise invoice in Reference document2 field Material document should be there but not showing its empty field.
    Thanks,
    VR
    Edited by: get_vr on Feb 10, 2010 9:08 AM

    Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
    Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
    Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
    Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
    5. Incoming Excise Invoice capture at Blocked stock 103 is not
    supported in CIN.
    The capture of incoming excise invoice is strictly advised to carryout at
    unrestricted stock and not at blocked stock(103/105) due to architectural
    issues. The capture at blocked stock may cause wrong excise posting.

  • Excise tab in not appearing in GR (new plant configured)

    Hi Experts,
    Excise tab is not appearing while GR posting.
    I have configured a new plant in Sandbox server for testing purpose. Have done all required settings as under:
    - New Plant configured
    - Complete Excise related configuration done in Logistics General-> Tax on Goods Movement
    - PR and PO created successfully. PO  showing correct excise duty, cess, hcess, CST component etc.
    - Material and vendor excise details maintained properly in J1ID
    I guess I have missed excise related config somewhere in SPRO
    please help !

    Hi,
    #Did you have Separate Excise Registration Number for new plant! check & define  in following path:
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Excise Registrations
    ##For new plant, Excise Reg. number need to be assigned to new Plant , check Excise Reg. number assigned to new plant
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Plant Settings)
    ###Check Excise Group created & assigned to new plant in following path:
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Excise Groups)
    For above setting also select check box of EI Capture and select check box of Post EI in MIGO
    Regards,
    Biju K

  • We have acrobat 11 and office 13.  In word the Adobe tab does not appear in the ribbon

    we have acrobat 11 and office 13.  In word the Adobe tab does not appear in the ribbon

    You have to update AA XI to work with AA 2013. You may also have to open the OFFICE tools and enable the add-ons. There is no tool in some of the OFFICE applications. You can check the list in the PDF Maker folder in Acrobat.

  • Messages typed not appearing on the QWERTY display...

    Hi..
    Im having this prob which is when i type a message its not appearing on the small white screen. This happens to both mode for mini QWERTY and also Full Screen QWERTY. So when i use the Full screen mode i cant see the words that i typed untill i click the green colour tick mark.
    Pls help me if you guys know whats the prob...
    Thanks

    Hi Venkat,
    Yes thier is a problem in your config.
    Go to SPRO -> MM ->Purchasing>Confirmation->Setup confirmation control.
    Check your setting for the the Inbound Delivery Make it Not Relevant for POD
    and further select it and go to Confirmation Sequence and select AB -Order Acknowledgment and check box MRP-RElevant and then select LA-Inbound Delivery and Check all three boxes save it and then check in Me21n i think it should work
    Lekhram

  • Excise condition types not appearing in the Delivery document pricing

    Hi,
    This is a scenario of sales from an Exciseable Plant.
    The client has pricing requirement at delivery document.
    I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
    We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
    Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
    Regards
    Venkat

    Changed the Condition Category from 'F' to 'L'.

  • Excise duties values not appearing in the RG1 register

    Dear All
    After updation of RG1 register and extraction of the same on  checking the entries in the table J_1IRG1 we are not getting the BED ,Ecess and SECS.In printing of this register the same values are not appearing.
    Further this register is around 524 pages.It is showing per transection.How can we redure no of pages.
    Please guide in this matter.
    deepti

    hi,
    once again check
    1.Tcode: J1id
    2.Tcode:J1iex
    here see part1 created or not check it.
    3. Tcode:J1i5 update register
    4. Check condi.types for SH
    is not fine pls revert back
    regards
    ka

  • Excise Base Amount Not Populated in J1IEX / MIGO in Imports

    I have completed all following steps for Import process with CVD. CenVAT is to be taken on CVD.
    Configuration
    1. Maintain Import Pricing procedure with Conditions CVD, Cess and Ecess (JCV1, JECV, J1CV)
    2. Create Nil Tax code in FTXP and assign to Company code
    3. Maintained Excise Defaults for TAXINN with tax code created above and CVD conditions given
    4. Maintained CVD account in Company code settings
    5. Maintained OBYC settings
    6. Checked Condition type PB00 details which are standard settings only.
    Master Data
    1. J1ID Raw material and Chapter ID details Maintained
    2. J1ID Material Output material maintained
    3. J1ID Vendor Excise Registration maintained with some placeholder characters
    Transaction
    1. Import PO in USD created and maintained values for CVD condition types with custom vendor assigned.
    2. MIRO processed in INR for Custom duty vendor. CVD amount posted correctly.
    3. During, J1IEX error is shown "Please check Excise base for the item is Zero! "
    I searched other threads also. No significant help.
    Please help me find where the actual problem is.

    Hi Trivedi,
    Check whether you have done the "Customs MIRO" in INR.
    Additionally read this note carefully, the J1IEX part and check whether anything is missing.
    1559145 - Frequently asked questions for Procurement in India:
    CIN
    Regards
    Binoy

  • Cost Centers not appearing in the GL Display FAGLL03

    Dear Friends,
    In case of a particular GL Account we find tha the Cost Centers are not getting displayed in the GL Account display. However, when we check the documents, we find that the Cost Centers have been maintained in the document entry. The users have selected the field Cost Center thru Change Layout, but the report still does not show the Cost Centers.
    Could you help and advise what needs to be checked.
    Regards,

    FAGLL03 has many "small" items that do not generate correct results.
    You need to look at alll the applicable notes, including the following:
    946998,1063198,1107639,1113114,1163346,1223997,1332265,1361048,1391665. You may think these do not apply, but they probably represent things you just haven't run into yet.
    Good luck!

  • Add new tab button does not appear at the right of the previous tab

    Just upgraded to Firefox 4 and the plus sign (T) for a new tab does not appear on the right of the previous tab as it had in earlier versions. I thought it was there briefly after I upgraded but it's not there anymore. How do I get it back? I did download the extension "new tab at the end" but that didn't help....

    That button should be available by default. However, if you use tab related Add-ons it may not show up as expected. You can add it back by right clicking on the navigation bar, clicking Customize, then drag the New Tab icon to the right end of tab bar.
    If that doesn't work, please try starting Firefox in Safemode to see if add-ons are indeed interfering.

  • " mirror tab" does not appear on menu in Android beta version, as described in help topic on mirroring a webpage on tv via Chromecast..

    Downloaded Firefox Beta for Android because I read about its support for Chromecast. I'm running Android ver. 4.2.1 on an ASUS TF700t tablet. I get that the Firefox menu is hidden because my tablet has a 3-dot menu, which I can access via Tools on the device menu. But Mirror Tab does not appear on the Tools menu.
    Thanks
    Joel

    Hi joelgibbs,
    Thank you for your question. This is something that we are still working on. [https://bugzilla.mozilla.org/show_bug.cgi?id=1084128 Keep track of progress] but keep in mind [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html]

  • Excise not captured in the MIGO & Tax calculation is not correct in the PO.

    Excise Settings completed.                    02.11.2007
    a)     Configuration done as per J05 Building block.( Tax Procedure TAXINN)
    b)     Maintained J1ID, all steps.
    c)     Maintained tax code in FTXP.
    d)     FV11  Maintained for Material, vendor, Plant in combination with Tax code input tax maintained in FTXP.
    e)     Checked CIN Health, all tick are green.
    f)     Given all G/L accounts for Excise Transaction Type (ETT)
    g)     Maintained all number Ranges.
    Issue  1)
    Tax calculation is not correct in the PO, tax tab
    a)     JMIP is appearing 12% in condition amount, (as per condition record) but condition value is Zero, (Not calculated by the FI Pricing procedure). Screen shot for Pricing procedure, PO taxes and condition record given below.
    b)     JIPC Sales tax 4% in condition amount (as per condition record) , calculated by the FI Pricing procedure is 8%, condition value is Rs 8 instead of Rs 4
    Fi pricing procedure.
    PO Taxes  wrong Tax calculated
    FV11 Condition record
    Issue  2)
    While creating Goods receipt aginst PO (Tax code V2 in PO). Movement type 101, Excise tab appears at Header and Item level and we need to put the Vendors Excise Invoice and date, nothing is copied from the PO for Excise duty  & sales tax.
    Now we put the values for ED and Sales tax manually in the MIGO and saved the document. While display material document, excise tab is not there i.e. no excise related activiy is captured here in goods receipt.
    If you need more detail, please revert on cell 093295 53235.
    Please suggest.
    Manish Gupta
    93295 53235
    [email protected]

    Hai,
    1.Check the condition types JMIP & JMIC in IMG - Financial accting New - FI AC Global settings - Taxes on sales and purchases - Check calculation procedure - Define condition type.
    2.The condition types you have used are defined for non deductible taxes i.e., it gets inventorised, added to the material account.And also the accural key assigned to this condition types are NVV - defined for non ded input taxes.
    3.Instead the condition types defined by SAP Standard system for BED & ST are JMOP & JIPS and the accurals assigned to this are VS1 & VS5.
    If you want clear details mail the screen shots to my id [email protected]

  • Re: Excise tab is not displaying in migo.

    My end user has created an asset P.O. Then while executing migo excise tab is not displaying. what is the fault, & where we have to correct it. its ur.
    thanks
    tuljasingh.

    Hi,
    While doing MIGO transaction the excise tab will appear only if you mark your line item as OK in your MIGO item details.
    Try to simulate MIGO by marking your item as OK then excise tab will appear & if the excise values are not flowing in the excise tab check the following
    J1ID excise master
    1. Plant - Material - Chapter ID combination
    2. Vendor Plant Excise Details.
    3. Excise Tax Rates for Chapter ID/Plant combination.
    Check whether the rates are there in your PO or not?
    Also check the whether you have maitained the Default excise condition types in SPRO/LG/Tax on Goods movements/India/ Basic Settings -Maintain Excise Defaults.
    Regards,

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?

    I cannot sync my Firefox 18 desktop with iPad or iPhone browsers. I have tried everything suggested on the Web and have tried safe mode as well. When I enter the three-line synch code, I get a sync failure. I have deleted my account and then set up a new account without success. Manage Account does not appear in the options sync tab. How do I manage my account to get the recovery key?
    I’ve spent hours on this and am considering using Chrome as my regular browser since I have no trouble syncing Chrome with apps. Help appreciated.

    You can only inspect the sync key via manage account if this device is has been setup and is connected to the sync server.
    You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)
    You can look at this version of the about:synckey extension that I have modified to show the sync key in current Firefox versions (desktop and mobile).
    * http://www.freefilehosting.net/aboutsynckey-11-fnfx
    * [[/questions/942893]]

Maybe you are looking for