Excise tab not appearing in GR display

Hi,
After creating the Goods reciept, when we display the GR document the excise tab is not appearing. While creating only the excise tab appears and can enter all the excise details. But if want check the values entered in the display mode of the GR, we tab does not appear.
Please let me know if any customising setting needs to be done so that this tab will appear in display mode also. We are on ECC 6
Thanks,
SR

Hi,
As per my understanding ......
While Doing MIGO, Excise Tab appear at header level in Excise Tab and also at Item Level.
But when u post part1  only, then Excise Entries also found there.
But after posting Part1 in MIGO and Part2 in J1IEX,
while going to back MIGO Document, Exicse Does not appear there becoz u post only part1 not part2.
u can observe there entries like this
During GR
                                    Material Stock            Dr.
                                    GR/IR clearing                        Cr.
  During Excise Invoice Credit           
                                    Cenvat Account          Dr.
                                    Cenvat Clearing                     Cr.
Hope Clear U !
Regards,
Pardeep Malik

Similar Messages

  • Part 1 generated while creating migo but display mode Excise tab not appear

    Hi
    I created migo Part 1 generated. and excise tab also appeared.
    but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
    Please explain What could be the reason
    Regards
    sitaram

    Hi
    Please any body give me valuable suggesition.
    Thanks and regards
    sitaram

  • Excise Tab not appearing in MIGO Screen

    Excise Tab not appearing in MIGO Screen
    Reg
    Sunil

    Hi,
    For GR, which movement type you are using...?
    If it is 103, you will get the excise invoice tab only in 105 GR.
    If it is 101 only, check the following configuration.
    SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
    Please revert for further analysis.
    Regards,
    Siva

  • Excise tab not appearing for non cenvatable po

    Hi All,
            while doing MIGO , the excise TAB is appearing for cenvatable items.
    but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
    i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
    If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
    pl guide
    regards

    thanks,
          I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
    the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
    Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
    pl reply
    regards

  • Excise Invoice Tab not appeared in MIGO Display mode

    Dear All Guru,
    we are facing a problem after posting excise invoice,we are not able to see excise invoice tab in MIGO display mode .We are done all necessary patch uploading but there are some ABAP programming change related to MIGO display.
    Pls, send necessary note or some clue.
    Thanks,
    Abhijit

    Hi Abhijit,
    How you posted the excise invoice, have you done this posting in MIGO transaction or in J1IEX transaction.
    If you have not gor the Excise tab in MIGO while posting you cann't get the same after posting also. You need to do settings for this in IMG settings for the excise group customization then you will get this excise invoice tab in MIGO
    Hope  you understand.
    rgds
    Chidanand

  • Excise tab not appearing in MIGO

    Dear All,
    We have some issue in MIGO.
    We have imported a material against a PO and the MIRO is done for customs duty.
    But at the time of doing MIGO customs duty is not capturing. 
    The PO is issue to cost center PO and there is no item no for the PO item. 
    Kindly give some suggestion for the same.
    Regards,
    Mullairaja

    >
    MullaiRaja wrote:
    > Dear All,
    >
    > We have some issue in MIGO.
    >
    > We have imported a material against a PO and the MIRO is done for customs duty.
    >
    >  But at the time of doing MIGO customs duty is not capturing. 
    >
    > The PO is issue to cost center PO and there is no item no for the PO item. 
    >
    > Kindly give some suggestion for the same.
    >
    > Regards,
    > Mullairaja
    While doing MIGO,enter purchase order no.,press enter,Enter correct commerical inv. no & year then
    enter gr qty,tick item ok,press enter,excise tab appears. See customs duties were flowing.
    Hope it solves  problem.

  • Excise Tab not appearing in MIGO Screen but getting posted with EI Entry

    Hi ,
    I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
                                                           GR/IR Clearing A/c Dr
                                                           RG 23 BED A/c      Dr
                                                           RG 23 Ecess A/c  Dr
                                                           RG 23 SHEcess A/c Dr
                                                           Vendor A/c Cr
    Can any one help me and provide solution for this.
    Thanks
    Sukant

    HI,
    Check your excise group settings, in it check migo settings.
    You need to mark tick in all boxes
    EI capture
    Post EI in MIGO
    Duty differenc at GR
    EI create/RG23D selection
    Update RG1at MIGO
    Also check in J1ID trax for the Po material chapter id is maintained.
    Regards
    KK

  • Shipping tab not appearing in PO

    Dear Sir,
    I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
    I dont know wht step i hv missed out, please advise what should i do.
    Looking forward for your quick response on th same.
    Regards
    Parul

    Hi Parul
    Pls check the following settings.
    1.     Define receiving plant for sto. (Storage location also for this plant if required).
    2.     Assign receiving plant to company code.
    3.     Assign receiving plant to the supplying plants sales org, distribution channel.
    4.     Assign shipping point of supplying plant to receiving plant.
    5.     Maintain purchasing organization and assign it to receiving plant and company code.
    6.     Create receiving plant as a customer in supplying plant (normal customer creation).
    7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                         Select receiving plant and assign customer number (previous step number)
                         Assign the sales area of supplying plant.
                         Select supplying plant assign the sales area of supplying plant
    8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
    9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
    10.     Extend the material to the receiving plant.
    11.     For Second plant assign manual shipping point as of first plant (OVL2)
    Br.
    Ramana

  • Excise tab not open in MIGO

    Dear Experts,
    We have create new plant with reference to our existing plant, all testing done except MIGO.
    At the time MIGO excise tab not open in case of excisesable material, we have already update ch id, Cenvat determination & Vendor excise details in J1ID
    Please help
    Regards
    BK GAIKWAD

    Hi,
    Check "Duty different at GR" check box selected or not in MIGO Setting segment in Maintaining Excise Group setting in following path( if not just select the check box)
    SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
    Also check in above path the Excise Reg. is there in Excise Groups Segment.
    For your new plant check Excise Reg. number is assigned in following path in Maintaining Plant Settings
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Plant Settings
    Regards,
    Biju K

  • Excise tab not required in MIGO if  Inventorised tax code is used

    hi expert
    Can we define systen if  if  Inventorised tax code is used ,Excise tab not required in MIGO .
    regard
    Nabil

    Hi,
    as per me excise tab depend on J1ID setting, you know this
    Not on tax code or on condition
    Regards
    Kailas Ugale

  • Vendor evaluation tab not appearing in ML81N

    Hi,
    Vendor evaluation tab not appearing in ML81N.
    Please suggest

    Hello,
    Please maintain vendor evaluation for related purchasing organization. Afterwards, vendor evaluation tab will be appeared in ML81N.
    Thanks.
    Regards,

  • Results recording tab not appearing in QA32

    hi,
    can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

    Just check which roles are added to that used id
    selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
    take help from ur basis guy for this.

  • HR BENEFIT:dependent tab not appear

    Dear Experts,
    I got problem with HR Benefit Administration.
    When I do the Enrollment process, dependent tab not appear.
    I check in IT0021, family member was there.
    at SPRO - at step "Claim Variant for Plan" I did check claim grouping
    so, at "Claim Rule for Plan" I choose the claim group and add dependent cover.
    my problem is when uncheck the claim grouping at claim variant for plan - dependent tab at enrollment appear.
    BUT I need those claim grouping as for rule plan, but then dependent tab not appear.
    how to make it appear?
    is there any missing configuration?
    thanks in advance
    Edited by: nzworld on Oct 18, 2011 4:39 AM

    Hi,
    anyone got this situation?
    thanks

  • STO - Excise tab not getting displayed in material document after posting.

    Dear all,
    We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
    It is plant to plant stock transfer with excise, the process that we are following as given below:
    1) STO PO - ME21N
    2) Outbound delivery - VL10B - Post PGI in VL02N
    3) Outgoing excise invoice - J1IIN  - With the key DLFC.
    4) GR - MIGO with excise invoice capture.
    During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
    But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
    Request to please do let us know if we have missed out on any configuration or master data.
    Regards,
    mahesh.

    Hi,
    Do the all customization setting for CIN for reference check the following link for India. and Material management
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    You have to maintain Excise master data for material,vendor and PLant in J1ID .
    reward if helpful,

  • Excise Tab not display in MIGO

    Hi,
    I had prepare import PO mentioning all custom duty (CVD),
    While doing MIGO, excise tab is not displaying it in.
    Please help me, its urgent matter
    thank's in advance
    Parag Lute

    Hi,
        It means Manufacturing plant setting is not done in SPRO and DC plants have been configured.
    Follow following Menu path
    SPRO> Logistics General> Tax On Goods movement> India> basic Settings-->Maintain Plant settings
    Enter manufacturing plants here and delete the DC plants existing over there.
    Reward if helpful

Maybe you are looking for