Exclude the currency in F110

Hi SAP Gurus,
Is it possible to exclude the currencies at the time of doing F110 without changing in the configuration level.
Please help me for the above issue.
Thanks in Advance.
Regards
Vinu

Dear Vinu,
I think it is possible To change th Currencies i two ways
1. In Bank Determination step we can assign the currienciessystem only take those currencies and
2. In F110
Free Selection Tab
Give Currencies there to Filter the currencies
Regards,
Harinath.K

Similar Messages

  • Automatic Payment F110, Using currency other than the currency of invoice.

    I want know if it is possible to make automatic payment by F110, paying through a currency other than the currency of the invoice?
    Using the f-53 transaction i know that is possible, but i must use the F110, because I generate a file to send to the Bank.
    Thks,
    Fernando

    Invoice Booked for USD but payment want INR through F110, Cheque printing.
    Christoph Gilberg Mar 26, 2015 8:27 PM (in response to Sam P)
    Hi Sam,
    you have to add this information at the time of invoice entry. Screenshot from F-43 below.
    Best Regards,
    Christoph

  • Excluding some Vendors in the range in F110

    In Transaction F110 ,The User Enters a ranges of Vendors in the Parameter.In some cases they want to exclude some Vendors in the Range but that Provision is not provided in the EXTENSION of that Parameter.
    Please Suggest me,is there currently a way with in F11O.
    Regards
    Balaji.

    Hi
    I can only split the range into several range in order to exclude some value, so If you need to insert the range beetween 1 and 10 and exclude the number 6, it needs to insert two range:
    - 1 to 5
    - 7 to 10
    Max

  • The currency is not getting updated in the table VBAP

    Hi ,
    The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
    Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
    Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
    The net Value has data in it .
    The system is ECC 5.0
    Regards,
    Senthil

    Dear Senthil,
    Please apply the following notes (if they apply to your support pack level) and retest:
    1460621 VBAP-WAERK is deleted after the sold-to party is changed
    1426441 VBAP-WAERK deleted for subitems
    1493998 VBAP-WAERK deleted for subitems
    This should resolve the issue. I hope this helps.
    Best regards,
    Ian Kehoe

  • Right Align the Currency values in ALV report

    Hi Friends,
    I have developed a report and displayed the output using the ALV. I have columns for currency values in the output table.
    The fields for currency values are character fields. The values in the table for display, is properly right aligned (default for currency values). But in the output, the currency values are left aligned.
    Since I need blank lines in the output table after each entry, I have used the character fields in the output table so that I can clear them and append it to get the blank line.
    Please suggest me to get the currency values right aligned.
    Thanks in advance.

    try with this field in field catalog.
             just(1)        type c,        " (R)ight (L)eft (C)ent.
    for the currency field add this field too in field catalog. it will work.

  • Can I run the currency translation for multiple years at the same time?

    Dear Friends,
    I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
    say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
    Can I run the currency translation for multiple years at the same time ?
    Note: The year is determined from the YEAR property of the "Time" dimension
    appreciate any inputs,
    thanks

    You can run currency translation for multiple years.
    I think the problem it is actually related to how you are sending the parameter to currency translation script.
    Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
    My expectation is that actually the script is called just with first year and that's the problem.
    Log of script logic you can find it into:
    C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
    Regards
    Sorin Radulescu

  • How can I instruct SqlMetal to exclude the 'storage' attribute of all the columns on a mapping file when converting a .dbml file to a mapping file?

    Hi,
    I'm trying to use LINQ to SQL with a top down approch using my own POCO classes. I'm using a XML file for the external mapping but in order to avoid typing a long file by hand I found that I could use the O/R designer to create the .dbml and from there I
    could use SqlMetal.exe to generate the map file from the .dbml. The only thing is that, by default, SqlMetal generates a map file which includes the 'storage' attribute for all the columns of the database. For example:
    <
    Column
    Name="Ticker"
    Member="Ticker"
    Storage="_Ticker"
    DbType="NChar(20)
    NOT NULL"
    CanBeNull="false"
    />
    However, in my code I only use automatic properties (Ticker, in this example) and not properties with the corresponding private field. Basically, I don't have any field "_Ticker" in my class. I found out that this the reason why I'm getting the error
    "Bad Storage property: '_Ticker' on member 'TTS.Domain.Asset.Ticker" when trying to add an entity to the database. However, ff I delete the all the 'storage' attributes from my mapping file everything works fine.
    Is there a way so I could use SqlMetal to generate a map file from a .dbml file but in which it never includes the 'storage' attribute?
    Thanks.
    Best,
    Miguel T.
    This is reason why I'm getting the error.

    Hi Serguey,
    I was expecting that answer but I still had some hope that it could be possible! I checked those 2 links before sending my question.
    Currently, I'm deleting the storage attributes everytime that I generate a mapping file. The issue is that I will have to do this eveytime that I need to add data in my O/R designer which happens quite frequently since I'm working with iterations in my project.
    It's not very practical but it's still better than write the additional data by hand.
    I don't know how I could create my own mapping validation in order to exclude the 'storage' attributes everytime that I generate a mapping file from a .dbml file with SqlMetal but I will check that option too.
    Thanks for your helps.
    Best,
    Miguel.

  • Exclude the value 0 records in the pivot view obiee 10g

    HI,
    I have a requirement.,i have report circuit and outage time by month in a pivot view.If one circuit have a '0' outage time in all months then i want to exclude the record from the display.Is there anyway to display the data like this....
    thanks,
    prassu

    circuit   April may jun
       1          0   0     10   
       2         0     0     0
       3         0     4    1
    my question is  for circuit 2 all months we have outage 0.so i want to exclude the record , if we select Quarter 2.
    And  exclude 3 if we  select April....etc

  • BDC  display Error while converting the Currency ..

    Hi,
    Using BDC i have to cal Transaction Vk15.
    In this we have a field KONP-kbetr, which is a currency feild, with 2 decimals.
    I have to converted the Currency to 'EUR' and has moved it in a variable "gv_char13".
    ______________+declaration part+_____________________
    Data :  gv_eurconv_vk(14)      TYPE rkb1k-exchr,
               gv_eurconv_vk       TYPE konp-kbetr,
                 gv_char13(14) TYPE c.
    _____________+Currency Conversion+________________
      CALL FUNCTION 'RKC_SINGLE_EXCHANGE_RATE_GET'
        EXPORTING
          datum               = gv_sydatum
          kurst               = 'P'
          ncurr               = 'EUR'
          vcurr               = 'CZK'
    IMPORTING
       exchr               = gv_exchr_vk
       EXCEPTIONS
         no_rate_found       = 1
         OTHERS              = 2
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      WRITE gv_exchr_vk  NO-GROUPING CURRENCY 'EUR'.
      MOVE gv_exchr_vk TO gv_eurconv_vk.
      CLEAR gv_char13.
      WRITE gv_eurconv_vk TO gv_char13.
    _________+Passing Value IN BDC VK15+__________
        wa_bdcdata_vk-fnam     = 'KONP-KBETR(01)'.
        wa_bdcdata_vk-fval     =  gv_char13.                     
        SHIFT  wa_bdcdata_vk-fval LEFT DELETING LEADING space.
        APPEND wa_bdcdata_vk TO gt_bdcdata_vk.
        CLEAR wa_bdcdata_vk.
    ----------+Calling the Transaction VK15+____
      CALL TRANSACTION 'VK15' USING gt_bdcdata_vk  MODE 'E' MESSAGES INTO gt_bdcmsg_vk.
    **--Display the error message if the call transaction fails--**
        IF sy-subrc EQ 0.
          IF NOT gt_bdcmsg_vk IS INITIAL.
            READ TABLE gt_bdcmsg_vk INTO wa_bdcmsg_vk INDEX sy-index.
            CALL FUNCTION 'FORMAT_MESSAGE'
              EXPORTING
                id     = wa_bdcmsg_vk-msgid
                lang   = 'EN'
                no     = wa_bdcmsg_vk-msgnr
                v1     = wa_bdcmsg_vk-msgv1
                v2     = wa_bdcmsg_vk-msgv2
                v3     = wa_bdcmsg_vk-msgv3
                v4     = wa_bdcmsg_vk-msgv4
              IMPORTING
                msg    = gv_text_vk
              EXCEPTIONS
                OTHERS = 0.
            IF sy-subrc EQ 0.
              APPEND  gv_text_vk TO gt_mess_vk.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    **--Display the error message on the screen--**
      IF NOT gt_mess_vk[] IS INITIAL.
        LOOP AT gt_mess_vk INTO wa_mess_vk.
          WRITE:/ wa_mess_vk.
          CLEAR wa_mess_vk.
        ENDLOOP.
      ENDIF.
    In the dispaly tabkle for error message "gt_bdcmsg_vk" we get the sucess message and in table "gt_mess_vk" we get the message as the "Condition records Saved."
    The problem is when this report is executed it displayes the converted currency Value and in next line it dispalyes the ""Condition records Saved".
    But idealy the converted currency value should not be dispalyed.
    Actual Sample display:(shuld be this ):
    xyz.. message
    Condition Record Saved.
    Sample display (Error Dispaly ):
    xyz.. message
      3,14E-02 -
    (This shuold not be dispalyed)
    Condition Record Saved.

    Use modified code...
    *______________declaration part_____________________
    Data :  gv_eurconv_vk(14)      TYPE rkb1k-exchr,
              gv_eurconv_vk       TYPE konp-kbetr,
                 gv_eurconv_vk TYPE p DECIMALS 2,
                 gv_char13(14) TYPE c.
    *_____________Currency Conversion________________
      CALL FUNCTION 'RKC_SINGLE_EXCHANGE_RATE_GET'
        EXPORTING
          datum               = gv_sydatum
          kurst               = 'P'
          ncurr               = 'EUR'
          vcurr               = 'CZK'
    IMPORTING
       exchr               = gv_exchr_vk
       EXCEPTIONS
         no_rate_found       = 1
         OTHERS              = 2
      IF sy-subrc  <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    WRITE gv_exchr_vk  NO-GROUPING CURRENCY 'EUR'.
    MOVE gv_exchr_vk TO gv_eurconv_vk.
      gv_eurconv_vk = gv_exchr_vk.    
      CLEAR gv_char13.
      WRITE gv_eurconv_vk TO gv_char13.
    *_________Passing Value IN BDC VK15__________
        wa_bdcdata_vk-fnam     = 'KONP-KBETR(01)'.
        wa_bdcdata_vk-fval     =  gv_char13.                     
        SHIFT  wa_bdcdata_vk-fval LEFT DELETING LEADING space.
        APPEND wa_bdcdata_vk TO gt_bdcdata_vk.
        CLEAR wa_bdcdata_vk.
    Calling the Transaction VK15____
      CALL TRANSACTION 'VK15' USING gt_bdcdata_vk  MODE 'E' MESSAGES INTO gt_bdcmsg_vk.
    *Display the error message if the call transaction fails*
        IF sy-subrc EQ 0.
          IF NOT gt_bdcmsg_vk IS INITIAL.
            READ TABLE gt_bdcmsg_vk INTO wa_bdcmsg_vk INDEX sy-index.
            CALL FUNCTION 'FORMAT_MESSAGE'
              EXPORTING
                id     = wa_bdcmsg_vk-msgid
                lang   = 'EN'
                no     = wa_bdcmsg_vk-msgnr
                v1     = wa_bdcmsg_vk-msgv1
                v2     = wa_bdcmsg_vk-msgv2
                v3     = wa_bdcmsg_vk-msgv3
                v4     = wa_bdcmsg_vk-msgv4
              IMPORTING
                msg    = gv_text_vk
              EXCEPTIONS
                OTHERS = 0.
            IF sy-subrc EQ 0.
              APPEND  gv_text_vk TO gt_mess_vk.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    *Display the error message on the screen*
      IF NOT gt_mess_vk[] IS INITIAL.
        LOOP AT gt_mess_vk INTO wa_mess_vk.
          WRITE:/ wa_mess_vk.
          CLEAR wa_mess_vk.
        ENDLOOP.
      ENDIF.

  • Error while deriving the currency from table

    i am getting the below error while simulating the payroll for india.
    Error while deriving the currency from table T001P & Error during Initialization of payroll.
    i am SAP HCM Trainee.. practicing at home.

    Pls check the currency in table T500C.
    You can use TCode OE00 for table maintenance T500C.
    Also check whether currency is there in table V_CURC and T510.
    Hope this will help.
    Regards
    Ghouse

  • Error in decimal places while using the currency ends with 4 e.g. CNY4,USD4

    Dear all,
    I need ye help, the problem that a report having a field KONP-KBETR .......the report moves the decimal 2 places to the right.  And so, 412.3846 becomes 41238.46.  ..occurs only when the currency ends in 4 (CNY4, USD4, EUR4..) 
          Can you please guide.
    Thanks in advance .
    Rgds,
    Pem

    Hi,
    I think you are misinterpretting the things.
    1.CNY4, USD4, EUR4 are Currency keys and they does not end with 4 they are CNY, USD, EUR.
    2.and KBETR is CURR(11,2) so it will always display TWO places of decimals.
    Regards,
    Neha

  • Error while deriving the currency from table T001P.

    Hi Friends,
    I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
    I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
    Could you please help me as to where this error can be corrected.
    Thanks,
    Manj

    About the incidence, the problem might be related to the links between
    personnel area, company code and currency set up (table T001P, T500P and
    T001).
    Please check the following points:
    1- Have you assigned the Personnel area to the Company code under SPRO -
    IMG -> Enterprise Structure -> Assignment -> Human Resource Management
    -> Assignment of Personnel Area to Company Code.
    2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
    Determine Currencies (Public Sector Currency Need to be maintained along
    with the other node).
    3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
    Basic Pay -> Define Hourly Rates for several decimal places. (Please
    maintain all the nodes).
    4- Maintaining the table t500c through transaction code OE00.
    Regards
    Ramana

  • How to exclude the debit memo & credit memo out of COPA report (KE30)?

    As captioned, now the current KE30 default transfers all the data from sales orders interfaces (via VA01), such as common sales order, 3rd party drop shipment, credit memo and debit memo etc.
    Is there any idea to exclude the quantities display in KE30 towards Credit memo and debit memo? An user exit?
    Thanks for the great input...

    kissorkick,
    You need to clear some concepts in COPA.
    A similar example for you, COPA likes a supermarket, vendors supply stuff (data of billings etc) into the supermarket, then you select the stuff you want (Report result) by putting them into the shopping trolley. And KE30 likes the shopping trolley.
    Now the question, do you wish the vendors do not supply certain stuff (credit meno etc) into the market or you just do not put the stuff into your shopping trolley only? Configure by Tcode KE4W for the former case or create the report in Tcode KE30 with certain selection rule for the later case.

  • How to change the currency of the order  while creating the sales order??

    Hi all,
    I am new to this field.I have to create a Sales Order with reference to another
    SO but with different sold to party.Here i also have to change the currency of
    order from dollar to GBP.
    Please assist me to do this.
    Thanks.
    syed

    Hi
    Goto VA01 and try to create the order with reference to the Old order
    and after that order details are copied to the New order then, change the Sold to party and the currency in the Sales order Header and see? whether it allows you to change it or gives some error? then based on that you have to check and do further processing.
    Try and see
    If it won't allows you to change
    then create a New SO with the new sold to and currency and just take the old orders data from VBAK and VBAP tables and enter into the new order fields and save it will be created.
    <b>Reward points for useful Answers</b>
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Change the currency of Operating Concern COPA

    Hi,
    In my SAP environment there are 4 controlling areas. Only one of them is assigned to Operating concern. The remaining 3 have COPA inactive.
    I would like to extend the existing operating concern to remaining 3 controlling areas, but before I do that I need to change the Operating concern currency as the one currently set is only relevant for only one controlling area and company code which is GBP. I need to change it to group currency - USD.
    When I use F1 help on currency field in Operating Concern settings in configuration, I get information that 'once data has been posted, however, a change in the operating concern currency would cause the existing data to be interpreted as if it were posted in the new currency (for example: USD 1000.00 in old currency -> DEM 1000.00 in new currency).'
    Even though we have transactional data posted in that operating concern , it is not being used by any department and we are quite happy to have existing data interpreted in USD instead of GBP. No reports are being generated in COPA currently so it will not be an issue for us. We want new data to be proper and constistent.
    When I try to change the currency in operating concern config, the field is greyed out. I believe there is  more complex workaround for that, but the only note I found on this is  651142 which says that SAP provides different tools to reorganize operating concern. But no further details are included.
    If anybody managed to change operating concern currency, please help me with that.
    Regards,
    Karol

    Hi Karol
    I read the note given by you.. It asks you to contact the SAP for SLO Service (System Landscape Optimization )
    This is a chargeable service by SAP... In case you decide to go ahead with this, do share your experience with us
    Create an OSS msg and give ref of this note... I would suggest to go with SAP service and not with any one else's experiences... The tools that SAP is talking about are available only with SAP..
    You may try to archive the existing data from COPA tables and then see if the currency field opens up for editing.. Am not sure about it..
    Regards
    Ajay M

Maybe you are looking for