Execute Web Template without personalization for the current User

Hi,
I executed a BI Web Template, on SAP Enterprise Portal, which has been provided as a Portal content on the detailed navigation section.
Then, I navigate within the template, and I saved a personalized query view (the status of navigation of the report - applied filters, selected characteristics and key figures), through the button "Save Personalization" (standard command "SAVE_PERSONALIZATION")
Now, each time the same User executes the same BI query from the detailed navigation,
he get, as result, the personalized views.
How to reset the Portal Content to the original query which has been built on Query Designer? (meanings, as it was before pressing the "Save Personalization" button)
Moreover, is there a standard command for WT buttons like "Back to Start" (which not apply on this), to reset the original state of the query.
Thanks a lot for your help.

Hi,
try useing parameter
&USE_PERSONALIZATION=false
when calling the WebTemplate
regards johannes

Similar Messages

  • Microsoft Word Has Not Been Installed for the Current User

    Hi, everybody
    I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
    Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
    Routes tried and failed...
    1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
    2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
    At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
    Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
    -Kent S.
    Be strong as a ship and wise as a whale

    These questions are really best in the Microsoft Office Forums.
    These are MS Office Questions not ZEN Questions.
    Novell did not design Microsoft's Office Install.
    I have nothing against snapshots, but it does not work great with the Office
    installs, which you yourself know since you are posting here with problems
    based on that.
    And your other method you are trying with the break out is not working well.
    We also know that from experience.
    We can tell you that the way most people install it and the way most people
    succeed doing it, is by doing it the way recommended and designed by
    Microsoft.
    ZEN does that just fine.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "KentFSmith" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Thank you, Grimlock (-Grimlock?-)
    >
    > Through a google search I encountered a very close suggestion, and the
    > poster said they couldn't remember the name of a MS utility but that
    > there was one that would break out the individual MSIs from the Office
    > 2007 setup.exe bundle. The dependent app appears to be a simple and
    > possibly elegant solution, but without a good way to break out the MSIs
    > I don't see how to do anything other than with a config.xml ('Config.xml
    > file in the 2007 Office system'
    > (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
    >
    > Do you know of that utility and where I can find it?
    >
    > There is a lot of history here now of just doing the individual
    > applications. Everyone gets Word and Excel, but much fewer get
    > PowerPoint and Access. All other reasons aside, a compelling one is the
    > reduced number of help calls to the Help Desk here. Occasionally we
    > also just run the whole Office install for someone who needs some of the
    > odd utilities, but that is easily cost-justifiable for us to break them
    > out as exceptions. Otherwise, we focus 90% of our support on just Word
    > and Excel and it pays off nicely.
    >
    > If we switch to putting full Office 2007 on all PCs then there may be a
    > better approach that include other tools than ZfD, such as the fact that
    > we replace 1/3 of all PCs in the organization each year (so that no
    > hardware is more than 3 years "behind"). We could put 1/3 of all Office
    > 2007 installs into the new PC image. But we still need to support all
    > the use of the apps after the install, so ZfD MUST work well, it simply
    > MUST work well or we're screwed, to use the vernacular. Also, just
    > switching from what we've been doing for years -- single app orientation
    > -- means introducing new-ish issues that have to discover and explain to
    > our comrades, and to adjust our orientation with unknown future costs.
    >
    > But that may end up being the simplest adequate solution. And that's
    > what I want.
    >
    > -K
    >
    > grimlock;1883526 Wrote:
    >> Craig Wilson wrote:
    >> > You should really focus on #1.
    >> > Snapshot is not the way to go.
    >> >
    >> > Details about what is Not working or what random behavior may help
    >> folks.
    >> > Ask in the MS forums may help too. dont' mention zenworks.
    >> > Just say you are installing as Administrator from a share and getting
    >> these
    >> > errors.
    >> >
    >> > While not 100% accurate, it should be good enough to get some good
    >> feedback.
    >> >
    >>
    >> Nor is installing 1 app at a time. Install the whole suite, have an
    >> icon for each app that runs the exe for that app with a dependency on
    >> the another app that points to the installer msi.
    >>
    >> If any user runs any app, it will run if the executable is there
    >> (meaning it's been installed). If the executable is not there then it
    >> calls the dependent application (the installer app) and installs it,
    >> and
    >> then runs it.
    >
    >
    > --
    > KentFSmith
    > ------------------------------------------------------------------------
    > KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
    > View this thread: http://forums.novell.com/showthread.php?t=391573
    >
    >

  • IProcurement is not a valid responsibility for the current user. Please contact your System Administrator.

    Hi All,
    When I am trying to click on the 'iprocurement Home page' menu in the iprocurement responsibility getting the below error message in R12;
    "iProcurement is not a valid responsibility for the current user. Please contact your System Administrator."
    Can any one let me know how to resolve this?
    Regards
    Joseph

    Hi Joseph,
    I am assuming that the user actually has the iProcurement responsibility assigned to them. If so, try the following solution from note 1560400.1:
    1) Logon with System Administrator responsibility
    2) Navigate to Profile > System, click on User and enter the user name
    3) Search for profile 'Applications Start Page'. Delete the value set at user level and save
    4) Retry
    Regards,
    Cheryl

  • Functional Administrator is not a valid responsibility for the current user

    Hi,
    I have sysatem administrator responsibility as I am DBA on PRD. I assign myself functional administartor responsiblity. Now when i access fucntioanl administrator responsiblity,
    I am getting error as
    Functional Administrator is not a valid responsibility for the current userPlease help as I need to look at SSHR page for the use who is getting error while laucnhing
    Employee Self Service >>> My Benefits Data >>> Financial Profile
    Error: the requested URL was not found, or cannot be served at this time
    Please help for how I can access functional administrator resp to work further on users issue

    Please post the details of the application release, database version and OS.
    Have you granted “Security Administrator” role to your user? If not, please do so and check then.
    Also, check Apache log files for any errors.
    Thanks,
    Hussein

  • Customize view list in share point for the current user ?

    hi, 
    So i have teo create a view for current user , and to do that i have an item named : "assigned to" so when i create my view i put : "assigned to" = [Me], and whene i check y list viw it'snt  applayed ? 
    is there any one who can tell me what's the problem , 
    thank you 

    May be this is what you are looking for:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/0ec4a7b9-7b23-4b26-9e7e-bb4ec3f10afe/disable-all-day-event-in-calendar-list?forum=sharepointcustomizationlegacy
    http://ukreddysharepoint2010.wordpress.com/2012/01/19/how-to-hide-all-day-event-recurrence-and-work-space
    The script is:
    <script type=”text/javascript”>
    function HideField(title){
    var header_h3=document.getElementsByTagName(“h3″) ;
    for(var i = 0; i <header_h3.length; i++)
    var el = header_h3[i];
    var foundField ;
    if(el.className==”ms-standardheader”)
    for(var j=0; j<el.childNodes.length; j++)
    if(el.childNodes[j].innerHTML == title || el.childNodes[j].nodeValue == title)
    var elRow = el.parentNode.parentNode ;
    elRow.style.display = “none”; //and hide the row
    foundField = true ;
    break;
    if(foundField)
    break ;
    HideField(“All Day Event”);
    HideField(“Recurrence”) ;
    HideField(“Workspace”) ;
    </script>
    You can also use this webpart:
    http://officetoolbox.codeplex.com/

  • Query to get objects list for which the current user has 'SELECT' privilege

    Hi,
    I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views. The privilege information for the current user is scattered in more than one system views. I have following system views
    USER_TAB_PRIVS_RECD - Object grants for which the current user is the grantee
    ROLE_TAB_PRIVS - describes table privileges granted to roles. Information is provided only about roles to which the user has access.
    If the object privilege is granted explicitly like "GRANT ALL ON TABLE_NAME TO "USERNAME" then this privilege entry goes to USER_TAB_PRIVIS_RECD
    If the object privilege is granted by ROLE. Role is created with certain object privileges. this role is assigned to user "GRANT ROLE_NAME TO "USERNAME"", then this entry goes to ROLE_TAB_PRIVS
    From these findings, I have composed below query
    (SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT')
    Have I got user's all prvilege details? should I look some other system views?
    How to exclude system table privileges details?
    (SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT' AND OWNER NOT IN ('SYS','SYSTEM') Is this right?
    What about Public role in Oracle? Should I consider public role here?
    Oracel Version :11g
    I want make this query to work on Oracle 8i or above version
    Thanks

    >
    I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views.
    >
    You will need a hierarchical query to do that.
    Try this script for Listing privileges recursively for Oracle users
    http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html

  • ORA-13605: The specified task or object Get does not exist for the current

    Dear all,
    11.1.0.6 on solaris 10
    SQL>
    SQL> DECLARE
    2 taskname varchar2(100);
    3 taskdesc varchar2(128);
    4 task_id number;
    5 object_id number;
    6 timeLimit varchar2(25);
    7 numDaysToRetain varchar2(25);
    8 objectName varchar2(100);
    9 objectType varchar2(100);
    10 BEGIN
    11 taskname := 'SEGMENTADV_8980096';
    12 taskdesc :='Get';
    13 numDaysToRetain :='30';
    14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
    15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
    16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
    17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
    18 END;
    19 /
    DECLARE
    ERROR at line 1:
    ORA-13605: The specified task or object Get does not exist for the current
    user.
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
    ORA-06512: at "SYS.DBMS_ADVISOR", line 56
    ORA-06512: at line 14
    Am running the above as sys user ..
    Any idea ?
    Kai

    Hi,
    This link may help:
    ORA-13605: The specified task or object ADDM:<task number> does not exist.
    Thanks and Regards,
    Rajesh K.

  • I've added a new user to my computer and there doesn't seem to be any firefox connected to it. Do I have to install firefox for the new user also?

    I went to set up a separate user for my child and when I was finished there was no Firefox icon . All it showed was Explorer. Do I have to download Firefox for every user? Please help?

    Sounds that you didn't create a Firefox desktop icon for each user in the All Users group (C:\Users\All Users\Desktop), but only for the current user. You can either create a desktop shortcut to start Firefox on the desktop of your child to the "C:\Program Files\Mozilla Firefox\firefox.exe" program or create that shortcut for all users in the "C:\Users\All Users\Desktop" folder.
    If you also need a Start menu entry that place a shortcut here:
    "C:\Users\All Users\Start Menu\Programs\Mozilla Firefox"

  • DataTable Exception: Invalid operation for the current cursor position

    I have a JSF application that lists rows from a view in a SQL Server database. I have set up a commandLinks in an extra columns.
    The data is displayed properly, but when I select one of the commandLinks I get the "Invalid operation for the current cursor position" exception.
    Here's the source
    Domain.jsp
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
        <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
        <f:view>
            <html lang="en-US" xml:lang="en-US">
                <head>
                    <meta content="no-cache" http-equiv="Cache-Control"/>
                    <meta content="no-cache" http-equiv="Pragma"/>
                    <title>Page1 Title</title>
                    <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
                </head>
                <body style="-rave-layout: grid">
                    <h:form binding="#{Domains.form1}" id="form1">
                        <h:dataTable binding="#{Domains.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd"
                            value="#{Domains.dataTable1Model}" var="currentRow">
                            <h:column binding="#{Domains.column9}" id="column9">
                                <h:selectBooleanCheckbox binding="#{Domains.checkbox2}" id="checkbox2"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText9}" id="outputText9" value="Select"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column10}" id="column10">
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText4}" id="outputText4" value="Name"/>
                                </f:facet>
                                <h:commandLink action="#{Domains.groupList}" binding="#{Domains.linkAction1}" id="linkAction1">
                                    <h:graphicImage binding="#{Domains.image1}" id="image1" url="resources/images/domain16.gif" value="resources/images/domain16.gif"/>
                                    <h:outputText binding="#{Domains.linkAction1Text}" id="linkAction1Text" value="#{currentRow['name']}"/>
                                </h:commandLink>
                            </h:column>
                            <h:column binding="#{Domains.column3}" id="column3">
                                <h:outputText binding="#{Domains.outputText5}" id="outputText5" value="#{currentRow['description']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText6}" id="outputText6" value="Description"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column4}" id="column4">
                                <h:selectBooleanCheckbox binding="#{Domains.checkbox1}" id="checkbox1" value="#{Domains.domainviewRowSet.currentRow['enabled']}==1"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText8}" id="outputText8" value="Enabled"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column7}" id="column7">
                                <h:outputText binding="#{Domains.outputText13}" id="outputText13" value="#{currentRow['userCount']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText14}" id="outputText14" value="Users"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column8}" id="column8">
                                <h:outputText binding="#{Domains.outputText15}" id="outputText15" value="#{currentRow['groupCount']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText16}" id="outputText16" value="Groups"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column5}" id="column5">
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText17}" id="outputText17" value="Actions"/>
                                </f:facet>
                                <h:commandLink action="#{Domains.editDomain}" binding="#{Domains.linkAction2}" id="linkAction2">
                                    <h:graphicImage binding="#{Domains.image2}" id="image2" title="Edit" value="resources/images/edit.gif"/>
                                </h:commandLink>
                                <h:commandLink binding="#{Domains.linkAction3}" id="linkAction3">
                                    <h:graphicImage binding="#{Domains.image3}" id="image3" title="View" url="resources/images/view.gif" value="resources/images/view.gif"/>
                                </h:commandLink>
                                <h:commandLink binding="#{Domains.linkAction4}" id="linkAction4">
                                    <h:graphicImage binding="#{Domains.image4}" id="image4" title="Delete" value="resources/images/delete.gif"/>
                                </h:commandLink>
                            </h:column>
                        </h:dataTable>
                    </h:form>
                </body>
            </html>
        </f:view>
    </jsp:root>
    Domains.java
    * Page1.java
    * Created on October 28, 2004, 12:45 PM
    * Copyright Gordon.Bell
    package usergroupmgt;
    import javax.faces.*;
    import com.sun.jsfcl.app.*;
    import javax.faces.component.html.*;
    import com.sun.jsfcl.data.*;
    import javax.faces.component.*;
    import com.sun.sql.rowset.*;
    import javax.faces.convert.*;
    public class Domains extends AbstractPageBean {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
        private int __placeholder;
        private HtmlForm form1 = new HtmlForm();
        public HtmlForm getForm1() {
            return form1;
        public void setForm1(HtmlForm hf) {
            this.form1 = hf;
        private HtmlDataTable dataTable1 = new HtmlDataTable();
        public HtmlDataTable getDataTable1() {
            return dataTable1;
        public void setDataTable1(HtmlDataTable hdt) {
            this.dataTable1 = hdt;
        private JdbcRowSetXImpl domainviewRowSet = new JdbcRowSetXImpl();
        public JdbcRowSetXImpl getDomainviewRowSet() {
            return domainviewRowSet;
        public void setDomainviewRowSet(JdbcRowSetXImpl jrsxi) {
            this.domainviewRowSet = jrsxi;
        private HtmlOutputText outputText4 = new HtmlOutputText();
        public HtmlOutputText getOutputText4() {
            return outputText4;
        public void setOutputText4(HtmlOutputText hot) {
            this.outputText4 = hot;
        private UIColumn column3 = new UIColumn();
        public UIColumn getColumn3() {
            return column3;
        public void setColumn3(UIColumn uic) {
            this.column3 = uic;
        private HtmlOutputText outputText5 = new HtmlOutputText();
        public HtmlOutputText getOutputText5() {
            return outputText5;
        public void setOutputText5(HtmlOutputText hot) {
            this.outputText5 = hot;
        private HtmlOutputText outputText6 = new HtmlOutputText();
        public HtmlOutputText getOutputText6() {
            return outputText6;
        public void setOutputText6(HtmlOutputText hot) {
            this.outputText6 = hot;
        private UIColumn column4 = new UIColumn();
        public UIColumn getColumn4() {
            return column4;
        public void setColumn4(UIColumn uic) {
            this.column4 = uic;
        private HtmlOutputText outputText8 = new HtmlOutputText();
        public HtmlOutputText getOutputText8() {
            return outputText8;
        public void setOutputText8(HtmlOutputText hot) {
            this.outputText8 = hot;
        private UIColumn column7 = new UIColumn();
        public UIColumn getColumn7() {
            return column7;
        public void setColumn7(UIColumn uic) {
            this.column7 = uic;
        private HtmlOutputText outputText13 = new HtmlOutputText();
        public HtmlOutputText getOutputText13() {
            return outputText13;
        public void setOutputText13(HtmlOutputText hot) {
            this.outputText13 = hot;
        private HtmlOutputText outputText14 = new HtmlOutputText();
        public HtmlOutputText getOutputText14() {
            return outputText14;
        public void setOutputText14(HtmlOutputText hot) {
            this.outputText14 = hot;
        private UIColumn column8 = new UIColumn();
        public UIColumn getColumn8() {
            return column8;
        public void setColumn8(UIColumn uic) {
            this.column8 = uic;
        private HtmlOutputText outputText15 = new HtmlOutputText();
        public HtmlOutputText getOutputText15() {
            return outputText15;
        public void setOutputText15(HtmlOutputText hot) {
            this.outputText15 = hot;
        private HtmlOutputText outputText16 = new HtmlOutputText();
        public HtmlOutputText getOutputText16() {
            return outputText16;
        public void setOutputText16(HtmlOutputText hot) {
            this.outputText16 = hot;
        private HtmlSelectBooleanCheckbox checkbox1 = new HtmlSelectBooleanCheckbox();
        public HtmlSelectBooleanCheckbox getCheckbox1() {
            return checkbox1;
        public void setCheckbox1(HtmlSelectBooleanCheckbox hsbc) {
            this.checkbox1 = hsbc;
        private UIColumn column5 = new UIColumn();
        public UIColumn getColumn5() {
            return column5;
        public void setColumn5(UIColumn uic) {
            this.column5 = uic;
        private UIColumn column9 = new UIColumn();
        public UIColumn getColumn9() {
            return column9;
        public void setColumn9(UIColumn uic) {
            this.column9 = uic;
        private HtmlSelectBooleanCheckbox checkbox2 = new HtmlSelectBooleanCheckbox();
        public HtmlSelectBooleanCheckbox getCheckbox2() {
            return checkbox2;
        public void setCheckbox2(HtmlSelectBooleanCheckbox hsbc) {
            this.checkbox2 = hsbc;
        private HtmlOutputText outputText9 = new HtmlOutputText();
        public HtmlOutputText getOutputText9() {
            return outputText9;
        public void setOutputText9(HtmlOutputText hot) {
            this.outputText9 = hot;
        private UIColumn column10 = new UIColumn();
        public UIColumn getColumn10() {
            return column10;
        public void setColumn10(UIColumn uic) {
            this.column10 = uic;
        private RowSetDataModel dataTable1Model = new RowSetDataModel();
        public RowSetDataModel getDataTable1Model() {
            return dataTable1Model;
        public void setDataTable1Model(RowSetDataModel rsdm) {
            this.dataTable1Model = rsdm;
        private BooleanConverter booleanConverter1 = new BooleanConverter();
        public BooleanConverter getBooleanConverter1() {
            return booleanConverter1;
        public void setBooleanConverter1(BooleanConverter bc) {
            this.booleanConverter1 = bc;
        private HtmlCommandLink linkAction1 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction1() {
            return linkAction1;
        public void setLinkAction1(HtmlCommandLink hcl) {
            this.linkAction1 = hcl;
        private HtmlOutputText linkAction1Text = new HtmlOutputText();
        public HtmlOutputText getLinkAction1Text() {
            return linkAction1Text;
        public void setLinkAction1Text(HtmlOutputText hot) {
            this.linkAction1Text = hot;
        private HtmlGraphicImage image1 = new HtmlGraphicImage();
        public HtmlGraphicImage getImage1() {
            return image1;
        public void setImage1(HtmlGraphicImage hgi) {
            this.image1 = hgi;
        private HtmlCommandLink linkAction2 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction2() {
            return linkAction2;
        public void setLinkAction2(HtmlCommandLink hcl) {
            this.linkAction2 = hcl;
        private HtmlGraphicImage image2 = new HtmlGraphicImage();
        public HtmlGraphicImage getImage2() {
            return image2;
        public void setImage2(HtmlGraphicImage hgi) {
            this.image2 = hgi;
        private HtmlCommandLink linkAction3 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction3() {
            return linkAction3;
        public void setLinkAction3(HtmlCommandLink hcl) {
            this.linkAction3 = hcl;
        private HtmlGraphicImage image3 = new HtmlGraphicImage();
        public HtmlGraphicImage getImage3() {
            return image3;
        public void setImage3(HtmlGraphicImage hgi) {
            this.image3 = hgi;
        private HtmlCommandLink linkAction4 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction4() {
            return linkAction4;
        public void setLinkAction4(HtmlCommandLink hcl) {
            this.linkAction4 = hcl;
        private HtmlGraphicImage image4 = new HtmlGraphicImage();
        private HtmlOutputText outputText17 = new HtmlOutputText();
        public HtmlOutputText getOutputText17() {
            return outputText17;
        public void setOutputText17(HtmlOutputText hot) {
            this.outputText17 = hot;
        public HtmlGraphicImage getImage4() {
            return image4;
        public void setImage4(HtmlGraphicImage hgi) {
            this.image4 = hgi;
        // </editor-fold>
        public Domains() {
            // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
            try {
                domainviewRowSet.setDataSourceName("java:comp/env/jdbc/HBird");
                domainviewRowSet.setCommand("SELECT ALL dbo.DomainView.id, dbo.DomainView.name, dbo.DomainView.description, dbo.DomainView.enabled, dbo.DomainView.created, dbo.DomainView.modified, dbo.DomainView.userCount, dbo.DomainView.groupCount  FROM dbo.DomainView");
                dataTable1Model.setDataCacheKey("com.sun.datacache.Domains.domainviewRowSet");
                dataTable1Model.setRowSet(domainviewRowSet);
                dataTable1Model.setSchemaName("");
                dataTable1Model.setTableName("");
            } catch (Exception e) {
                log("Page1 Initialization Failure", e);
                throw e instanceof javax.faces.FacesException ? (FacesException) e : new FacesException(e);
            // </editor-fold>
            // Additional user provided initialization code
    //        try {
    //            domainviewRowSet.execute();
    //            domainviewRowSet.next();
    //        } catch (Exception ex) {
    //            throw new FacesException(ex);
        protected usergroupmgt.ApplicationBean1 getApplicationBean1() {
            return (usergroupmgt.ApplicationBean1)getBean("ApplicationBean1");
        protected usergroupmgt.SessionBean1 getSessionBean1() {
            return (usergroupmgt.SessionBean1)getBean("SessionBean1");
         * Bean cleanup.
        protected void afterRenderResponse() {
            domainviewRowSet.close();
        public String groupList() {
            // User event code here...
            return "groupList";
        public String editDomain() {
            // User event code here...
            return "editDomain";
    }and the exception stack:
    Stack trace:
    com.sun.jsfcl.data.ResultSetPropertyResolver$RowData.getData(Unknown Source)
    com.sun.jsfcl.data.ResultSetPropertyResolver.getValue(Unknown Source)
    com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:167)
    com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:151)
    com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:80)
    javax.faces.component.UIOutput.getValue(UIOutput.java:147)
    javax.faces.component.UIInput.validate(UIInput.java:639)
    javax.faces.component.UIInput.executeValidate(UIInput.java:838)
    javax.faces.component.UIInput.processValidators(UIInput.java:412)
    javax.faces.component.UIData.iterate(UIData.java:969)
    javax.faces.component.UIData.processValidators(UIData.java:781)
    javax.faces.component.UIForm.processValidators(UIForm.java:170)
    javax.faces.component.UIComponentBase.processValidators(UIComponentBase.java:904)
    javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:342)
    com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:324)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
    org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:214)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:168)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:144)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:114)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
    org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
    org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
    java.lang.Thread.run(Thread.java:534)Any help is appreciated.

    Hi,
    Looks like some inconsistency in the jsp source:
    in the 2nd link the url property is set. I don't think
    you need to set this.
    I couldn't tell what action you want to occur when you
    click. If you want some action to occur such as
    navigating to another page then you can use Page Navigation. Then you would need an action handler
    for the LinkAction component.
    <h:commandLink action="#{Domains.editDomain}" binding="#{Domains.linkAction2}" id="linkAction2">
    <h:graphicImage binding="#{Domains.image2}" id="image2" title="Edit" value="resources/images/edit.gif"/>
    </h:commandLink>
    <h:commandLink binding="#{Domains.linkAction3}" id="linkAction3">
    <h:graphicImage binding="#{Domains.image3}" id="image3" title="View" url="resources/images/view.gif" value="resources/images/view.gif"/>
    </h:commandLink>
    <h:commandLink binding="#{Domains.linkAction4}" id="linkAction4">
    <h:graphicImage binding="#{Domains.image4}" id="image4" title="Delete" value="resources/images/delete.gif"/>
    </h:commandLink>
    John
    JSC QA

  • Node id does not exist for the current application server id  on forms

    Hi,
    We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
    We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
    while opening oracle forms we are getting" Node id does not exist for the current application server id "
    on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
    Fnd_nodes... which matches ( there is no mismatch of application server id) .
    We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
    Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
    Can some one guide as to which file has this message "Node id does not exist for the current application server id "
    and what could be the reason for this.
    Help is appreciated.
    Regards,
    Milan

    I already tried the mentioned metalink note id but it did not work.What did you try exactly?
    Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
    i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
    Thanks,
    Hussein

  • Node id does not exist for the current application server id

    Hi gurus,
    when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
    i executed the command select server_id from fnd_nodes and had the following output
    SERVER_ID
    991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
    i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
    ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
    IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
    Please help me out.
    thanks.

    i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
    applmgr >./adstrtal.sh apps/apps
    You are running adstrtal.sh version 115.19
    Executing service control script:
    /dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
    script returned:
    adapcctl.sh version 115.55
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Apache Web Server Listener is not running.
    Starting Apache Web Server Listener (dedicated HTTP) ...
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Apache Web Server Listener (PLSQL) is not running.
    Starting Apache Web Server Listener (dedicated PLSQL) ...
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    adapcctl.sh: exiting with status 0
    .end std out.
    .end err out.
    please what should i do next to resolve this problem.
    thanks

  • How to execute web applications without deploying them?

    How can I execute web applications without deploying them (without mentioning them in the server.xml)?
    I have an IWS 6.1 SP1 installed with default parameters (JES). I would like that a posix user could execute his own web application without administrator collaboration.
    Does it exist some sort of "autodeploy" like in tomcat?
    (I know about the invoker mapping in default-web.xml, just I don't realy understand what does it eventuate. I tried to unzip webapps-simple.war in the directory $IWS_SERVER_HOME/webapps/$instance_name/servlet/tmp/
    but the http://a.a.tg/servlet/tmp request failed:
    javax.servlet.ServletException: WEB2784: Wrapper cannot find servlet class tmp or a class it depends on
    ----- Root Cause -----
    java.lang.ClassNotFoundException: tmp
    How can I solve this? Users should have write permission to the directories in the classpath to put their servlet.class files into? Bad idea...
    (I tried to "execute" the $IWS_SERVER_HOME/plugins/java/samples/webapps/simple/webapps-simple.war)
    (Sorry for my language skills)

    Do as many of the rest of us do, until this behavior is changed (if ever). Eport your WEb gallery to your Hd and use an FTP client, there are so many, including Drreamweaver's, and Shareware ones, and upload just the relevant files/folders. Some can even check and do this for you.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

    Team , Thanks for looking into this  ..
    As a last resort on  optimizing my stored procedure ( Below ) i wanted to create a Selective XML index  ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
    Index feature is not supported for the current database version.. How ever
    EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
    Is there ANY alternative way i can optimize below stored proc ?
    Thanks in advance for your response(s) !
    /****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    -- EXEC [dbo].[MN_Process_DDLSchema_Changes]
    ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
    AS
    BEGIN
    SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
    SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
    select getdate() as getdate_0
    DECLARE @XML XML , @Prev_Insertion_time DATETIME
    -- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
    SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
    -- PRINT '1'
    CREATE TABLE #Temp
    EventName VARCHAR(100),
    Time_Stamp_EE DATETIME,
    ObjectName VARCHAR(100),
    ObjectType VARCHAR(100),
    DbName VARCHAR(100),
    ddl_Phase VARCHAR(50),
    ClientAppName VARCHAR(2000),
    ClientHostName VARCHAR(100),
    server_instance_name VARCHAR(100),
    ServerPrincipalName VARCHAR(100),
    nt_username varchar(100),
    SqlText NVARCHAR(MAX)
    CREATE TABLE #XML_Hold
    ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
    BufferXml XML
    select getdate() as getdate_01
    INSERT INTO #XML_Hold (BufferXml)
    SELECT
    CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
    FROM sys.dm_xe_session_targets xet
    INNER JOIN sys.dm_xe_sessions xes
    ON xes.address = xet.event_session_address
    WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
    --RETURN
    --SELECT * FROM #XML_Hold
    select getdate() as getdate_1
    -- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
    CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
    FOR
    PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
    --RETURN
    --CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
    --SELECT GETDATE() AS GETDATE_2
    -- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
    --CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
    --USING XML INDEX [IX_XML_Hold]
    ---- FOR VALUE
    -- --FOR PROPERTY
    -- FOR PATH
    --SELECT GETDATE() AS GETDATE_3
    --PRINT '2'
    -- RETURN
    SELECT GETDATE() GETDATE_3
    INSERT INTO #Temp
    EventName ,
    Time_Stamp_EE ,
    ObjectName ,
    ObjectType,
    DbName ,
    ddl_Phase ,
    ClientAppName ,
    ClientHostName,
    server_instance_name,
    nt_username,
    ServerPrincipalName ,
    SqlText
    SELECT
    p.q.value('@name[1]','varchar(100)') AS eventname,
    p.q.value('@timestamp[1]','datetime') AS timestampvalue,
    p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
    p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
    p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
    p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
    p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
    p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
    p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
    p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
    p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
    p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
    FROM #XML_Hold
    CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
    WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
    p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
    AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
    AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
    SELECT GETDATE() GETDATE_4
    -- SELECT * FROM #TEMP
    -- SELECT COUNT(*) FROM #TEMP
    -- SELECT GETDATE()
    -- RETURN
    -- PRINT '3'
    --RETURN
    INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
    [UserName]
    ,[DbName]
    ,[ObjectName]
    ,[client_app_name]
    ,[ClientHostName]
    ,[ServerName]
    ,[SQL_TEXT]
    ,[EE_Time_Stamp]
    ,[Event_Name]
    SELECT
    CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
    ELSE T.nt_username
    END
    ,T.DbName
    ,T.objectname
    ,T.clientappname
    ,t.ClientHostName
    ,T.server_instance_name
    ,T.sqltext
    ,T.Time_Stamp_EE
    ,T.eventname
    FROM
    #TEMP T
    /** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
    -- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
    WHERE ddl_Phase ='Commit'
    AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
    AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
    WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
    AND MN.[DbName] = T.DbName
    AND MN.[Event_Name] = T.EventName
    AND MN.[ObjectName]= T.ObjectName
    AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
    AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
    -- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
    --SELECT GETDATE()
    --PRINT '4'
    --RETURN
    SELECT
    top 100
    [EE_Time_Stamp]
    ,[ServerName]
    ,[DbName]
    ,[Event_Name]
    ,[ObjectName]
    ,[UserName]
    ,[SQL_TEXT]
    ,[client_app_name]
    ,[Created_Date]
    ,[ClientHostName]
    FROM
    [dbo].[MN_DDLSchema_Changes_log]
    ORDER BY [EE_Time_Stamp] desc
    -- select getdate()
    -- ** DELETE EVENTS after logging into Physical table
    -- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
    -- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
    -- SELECT @XML
    SELECT GETDATE() GETDATE_5
    END
    GO
    Rajkumar Yelugu

    @@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
        May 14 2014 18:34:29
        Copyright (c) Microsoft Corporation
        Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    (1 row(s) affected)
    Compatibility level is set to 110 .
    One of the limitation states - XML columns with a depth of more than 128 nested nodes
    How do i verify this ? Thanks .
    Rajkumar Yelugu

  • Is there a way to reinstall an older version to avoid the loss of my valuable extensions and a feature without first uninstalling the current ve

    Is there a way to reinstall an older version to avoid the loss of my valuable extensions an a feature (where there are no add-on upgrades) without first uninstalling the current version.
    A great feature now missing from the 34 or 35 version forward, is where I could previously grab a tab, and drop it into my bookmarks and if necessary (which is always), simultaneously scroll up or down with the mouse and drop it in. NOW, i either have to scroll the bookmarks first and then grab and drop, or I have to drag the tab over to the top or bottom of the bookmarks screen for the system to recognize that it's there before it scrolls for me, then drop it to the correct location. Was this feature too difficult to keep from crashes occurring? This feature compensated for a bookmarks save window feature lost in version 3+ for which there is no add-on currently.
    i wish you guys would leave the awesome features alone. Really. You guys help and hurt us with every new version.

    Direct Download Links for Adobe Software
    Mylenium

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

Maybe you are looking for