Executing Batch work Item: Transaction brackets of the workflow has been da

Hi,
I am integrating workflow with the HR Processes and Forms using HCM.
The process is new hiring and in configuration I have given the workflow name which is copy of the standard workflow(WS18900008). The event used is draft_created.
When I execute the process and press the Save Draft, everything goes fine, the workflow gets completed but for the step Save Form Data(WS17900260) throws the following error:
Executing Batch work Item: Transaction brackets of the workflow has been damaged.
The task is TS17900108.
Not able to understand what is this error and to which it is related.
Pls help.

Look for SAP Notes as this is SAP standard code.
Short Text
Transaction brackets of the workflow has been damaged
Diagnosis
When executing the workflow with the ID , the transaction brackets were destroyed by a commit command ('C') or a rollback work command ('R'). This command ('') was stopped from the implementation program of the object type. Access takes place, for example, when a condition is evaluated or when the container operation is executed. Access may only have a read character which is why a commit or rollback work command is not necessary.
System Response
The system has written a log entry. Uncontrolled commit or rollback work commands can affect the restart function of the workflow system. This restart function is only necessary in the case of errors. The current workflow instance is executed further.
Procedure
Check the implementation program of the object types and remove the corresponding ABAP instructions.

Similar Messages

Transaction brackets of the workflow has been damaged

Hi,
I am integrating workflow with the HR Processes and Forms using HCM.
The process is new hiring and in configuration I have given the workflow name which is copy of the standard workflow(WS18900008). The event used is draft_created.
When I execute the process and press the Save Draft, everything goes fine, the workflow gets completed but for the step Save Form Data(WS17900260) throws the following error:
Executing Batch work Item: Transaction brackets of the workflow has been damaged.
The task is TS17900108.
Not able to understand what is this error and to which it is related.
Pls help.

Look for SAP Notes as this is SAP standard code.
Short Text
Transaction brackets of the workflow has been damaged
Diagnosis
When executing the workflow with the ID , the transaction brackets were destroyed by a commit command ('C') or a rollback work command ('R'). This command ('') was stopped from the implementation program of the object type. Access takes place, for example, when a condition is evaluated or when the container operation is executed. Access may only have a read character which is why a commit or rollback work command is not necessary.
System Response
The system has written a log entry. Uncontrolled commit or rollback work commands can affect the restart function of the workflow system. This restart function is only necessary in the case of errors. The current workflow instance is executed further.
Procedure
Check the implementation program of the object types and remove the corresponding ABAP instructions.

Using a property node of a menu ring to generate a secondary address does not work in a subvi unless the subvi has been or is opened. Why?

I am writing drivers for third party equipment using LabView 6.1. I am using the property node, digdisp.text, to get the item number of menu ring. This number is being used as the GPIB secondary address for the equipment. This vi is one many subVIs like it in a main vi.
The only way the main vi works consistently is if I open all the subVIs, otherwise the secondary address isn't picked up and I get a EARG and ENOL error in NISpy and a GPIB write error in the Error Out cluster.
I have attached an example of a NIspy capture of a failed attempt.
Attachments:
Capture.spy ‏9 KB

Hi,
EARG (4)
Error Condition: Invalid argument to a function call.
Description: EARG results when an invalid argument is passed to a function call.
Possible Cause: The following are some examples: you call ibtmo with a value not in the range 0 through 17 (possible timeout values correspond to a table of values ranging from 0 to 17, where the default is 13, which represents a 10 second timeout); you call ibeos with meaningless bits set in the high byte of the second parameter; or you call ibpad (or ibsad) with invalid addresses.
The reason you are getting the error is because not only is your secondary address invalid, but your primary address is also invalid. Lines 14 and 16 of your attached NI-SPY capture set
the primary address (ibpad) and secondary address (ibsad) respectively. You need to make sure that you are passing the addresses properly to the subVIs using a connector. It seems like your programming when sending and receiving data (like the addresses) from your subVIs is not correct. You have to be sure to pass the data back and forth in the proper method using connectors.
A.S.
Anu Saha
Academic Product Marketing Engineer
National Instruments

Error when executing a work item (cannot execute a method, biding problem?)

Hello,
I created a specific workflow, triggered by an event, from a class I also created.
From this event, I get some data about a Document (CV01/02/03N...).
The first step is a task which refer to a method (from the same class above).
The binding Task <=> Method is the data about the Document and the Workflow ID.
After I start the workflow, I execute the work item in SWI1, with a breakpoint in the method.
I can't go in debug, and the work item is in error (in Workflow log) :
- "Work item 000000590208: Object ZCL_SA3_WF_GED_RECL_FOURN method UPDATE_FID cannot be executed"
- "EXECUTE_METHOD_OBJECT_SYNC : Dereferencing of the NULL reference".
Note: The task is not in background processing, in the aim of debugging the source code.
I did SWU_OBUF and quit/relog SAP.
Do you have any ideas to solve this problem ?
I think it's a biding problem, because I can' t even go in debug mode...
Thanks.
Regards
(sap version: ECC 6.0)

Hi
Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
Regards
Pavan

How to include Sap Work item in email by FSCM workflow WS01700044

Hi,
In FSCM Dispute Management, we have a requirment to include the sap work item in the email being sent by the workflow - WS01700044.
The underlying task in it is TS01707928. This Task sends an email to the outlook as well as work item to SAP inbox.
We want to include Sap Work item in email being sent to the outlook.
This will help the users to process the workitem directly from the email instead of going to SAP Inbox to process the work items.
Please suggest the possible ways.
Thank you.
Amar

Hi,
For you kind of requirment you have to use tcode SWNCONFIG.
Through SWNCONFIG you can sent workitems to external email id.(exa. lotus notus/ outlook)
Regards,
Gurprit Bhatia

User who is informed when a work item or workflow has been fully processed

Hallo,
message recipient for completion:
User who is informed when a work item or workflow has been fully processed and its status is set to completed.
Where I can change the word "Notif. of Completion:" for e-mail (in german "Endebenachrichtigung")?
I don't want to change the text.
I want change only a word.
If the e-mail is created, the word is automatically written completion text "Notif. of Completion:" ("Endebenachrichtigung:").
Thank you for your help.
Best regards.
Edelgard Kubsch
Edited by: Edelgard Kubsch on Dec 17, 2010 11:10 AM

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?

Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve.

The sound has been working fine until now. I turn the volume up but no sound. What could be causing this and how do I fix it? Thanks so much.

The sound has been working fine until yesterday. I turn the volume up but no sound. Not while playing games or with key taps. What is causing this and how can I fix it? Thanks so much.

I did a search for "no sound" and found the solution. Thanks for the info.!

HT201335 Just upgraded my iPad to os8.0.2 and I do get the AirPlay mirroring option anymore. AirPlay works fine. My apple tv software has been updated. Very frustrating.

Just upgraded my iPad to os8.0.2 and I do get the AirPlay mirroring option anymore. AirPlay works fine. My apple tv software has been updated. Very frustrating.

Bingo mate. That solved it. **** I was so sure I wasn' doing anything stupid. Thanks a heap for that. I can now read NG on my 4K TV

I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, agree pressed but no further??

I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, the page shping license agreement comes. As soon as I press agree, it asks me to wait for verification and then this error that there is no working internet connection comes, even though I have one and it works fine

Try these steps as needed:
Reset phone: press both the home and power buttons, releasing when the Apple logo appears
Settings > General > Reset > Reset Network Settings. You will have to re-enter WiFi passwords
Connect phone to iTunes on your computer and update using iTunes
iOS: How to update your iPhone, iPad, or iPod touch

My Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

my Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

Hi hema87,
Thanks for using Apple Support Communities. This article has some troubleshooting steps you can try if FaceTime is timing out:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Ari

Executing Batch work Item: Transaction brackets of the workflow has been da

Similar Messages

Maybe you are looking for