EXIF and JPEG QUESTION

Why is it when I save as RAW files using Photoshop CS3 to JPEG, it removes the EXIF data?
any solution>?
i am not saving it for web.. simple save as toi JPEG

It is not just the RAW files. Photoshop CS3 discards some/lots of EXIF data from the camera's JPEG files, too.
Anyone have any word on a bug fix for this?

Similar Messages

Import RAW and jpeg

If I try to import both RAW and JPEG from the same folder or from the same card LR only imports the RAW files. I usually shoot RAW and JPEG simutaneously so they both have the same filename but different file types. Photshop handles this OK so whats going on?

It would probably have been better to start a new thread, rather than attaching your new question on the end of a 3 year-old thread, but anyway, by JEP do you mean JPG? Where are you seeing JEP/JPG? The RAW files from your camera won't say .RAW as the extension, but .CRW or .CR2 if Canon RAW and .NEF if Nikon RAW, and perhaps some other extension for a different manufacturer.
As far as shot-specific information: shutter-speed, aperture, ISO and focal-length are shown several different places such as under the histogram, in the metadata panel in Library mode, and in the Info Overlay in Loupe view in Library and Develop modes. You can define what specific things you want to display in the limited area using View / View Options. You can use the I key to cycle between nothing, Loupe Info 1 and Loupe Info 2.
For learning photography, shutter, aperture, ISO and focal-length are mostly what you'd need, along with white-balance color-temperature which is visible in Develop mode. Some camera-manufacturer-specific programs can also show things like which focus-points were enabled, but Lightroom works with many, many cameras from various manufacturers and things like focus-points are recorded differently from each manufacturer so LR doesn't attempt to decode and show such less-standardized information.
If you really want to see ALL the information encoded in an image--the EXIF data, then download EXIFtool and drag-and-drop an image to the EXE that has (-k) in the name and you'll see a very long list of information, most of it irrelevant to general photography and, again, different for different cameras, where LR is trying to show things that are common to all cameras.
EXIFtool is available from: http://www.sno.phy.queensu.ca/~phil/exiftool/

Help with managing RAW and jpeg images and installing iphoto 9

Greetings: Fist, let me make the neophyte apology and plea - I'm sorry, I should have come here first; I didn't and now I need your help.
I have just purchased a macbook pro (still in its box) with updated software for my older imac os x. I have a number of Canon related photo editing programs (that came with my 40D digital SLR) and Adobe photo elements 6 for mac on the imac. Following some erroneous advice I have made a complete mess of the pictures folder's content by trying to delete images directly from that folder (there are now 6000+ images in the folder, many of which are duplicates(?). Most of the images are not tagged or labeled and some have been organized in/by iphoto (I corrupted the iphoto's library structure very early on by disrupting and editing its images - which might explain why iphoto had a difficult time 'finding' and displaying some of my photos). The picture folder now holds jpegs, smallRAW images (a Canon 40D photo format) and various duplicates of the orignal images - (some of the duplicates don't display as images, but as jpeg logos, which, when opened contain duplicate image or are completely black) The first time I downloaded RAW images into iphoto 6 the RAW data displayed as a black image. When shooting in smallRAW on the Canon 40D, the camera produces a jpeg image for 'easy viewing and editing in the camera' but it looks as though iphoto 6 made duplicates of the jpeg and the RAW data and stored them in different locals in the picture file. In an attempt to get the number of images down, I have been trying to delete them from the picture folder. (My daughters both download images rather indiscriminately in hopes of 'editing them on the computer' which inevitably does not happen) and there is a lot of experimental bracketing of images - shooting raw and different Camera formats etc., all of which need to be cleaned up before I proceed.
Sometime in the not-too-distant future I would like to have iphoto 9 running on my imac with a clean library of images and a seamless way of downloading, editing and storing images (including the RAW data).
The macbook pro is for my highschool-aged daughter, who will run iphoto 9 but not have any RAW image data on her system. She would like to copy some of the old iMac's images to put into her own iPhoto 9 library (probably using a disk, email or on-line photo service - ideally, I would like to be able to copy and remove a number of those images from my HD and give them to her for the macbook)
A few questions and queries: Can I 'dis-able' iphoto 6, while I delete images (RAW and jpeg) from the picture file? (and is this even a good idea).
Once I have edited the # of images down to a reasonable size, should I re-launch iphoto 6, rebuild the iphoto library and then update to iphoto 9 or skip v6 and rebuild with v9?
And now for the 'how stupid is this guy question' - I really had planned to purchase an external backup; but between new the macbook, car repairs and braces it has never come to fruition. So, I have never properly backed up my images. What is the bare-bones, least expensive method for me to do this? I'd even consider burning everything to disks if that works. I can't afford the $ to purchase a new external hard drive right now (really). Budget is set aside mid-November for one though.
I've been looking through some other discussion boards and it looks like I'm not the only one having RAW image issues. I know that shooting smallRAW with the companion jpeg is probably not helping things but I take my camera equipment on extended canoe trips - and we like the ease of on-the-spot editing with this format.
Thanks in advance for your help - Mark

Terence, Is the picture folder the primary source for the images or does that data reside somewhere else?
If you gathered them there, then yes.
I really don't want to have to go through 14,000 images looking for the pictures that I want to keep (or is that my only option?).
Only you can decide what you want to keep.
Why does the computer keep making copies of the images and filing them under date and events?
That's how iPhoto works. It's not a problem usually, only you did go in there and make a problem, and now we are trying to fix it.
You advise not to muck around in the picture file via preview,
No I don't. I advise not to much around in the iPhoto Library Folder.
but if I download images through a program other than iPhotos - image capture or adobe aren't I doing that anyway?
Adobe what? Adobe is a software manufacturer who make many excellent applications, you need to be more precise. And no, if you import photos with Image Capture or “adobe” no you are not interfering with the iPhoto Library Folder.
Can you edit a base image file somewhere and remove it from the HD without iphoto making a copy of it and storing it somewhere else?
This is stunningly easy. Don't use iPhoto. Use an image editor.
I want to look the negatives, decide which ones I want and throw the rest away. Can that be done or am I way off course?
Yes, and iPhoto (or similar apps) make this really easy.
Hook up your camera. Import the pics to iPhoto. Go through the imported pics. Trash the ones you don't want. Then process the ones you do. But you must learn how to use iPhoto to do this successfully
To trash: put the pic in the iPhoto trash and empty it. This removes the file from iPhoto and the Hard Disk.
Process it: If you want to use another editor: You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

HD video and Jpeg pics in the same project/sequence?

I want to use both HD video (1929x1084;24bps) and Jpeg pictures from my DSLR camera in the same sequence. My problem is that when i choose the correct presets for the video (DSLR 1080p24) then the Jpegs gets cropped in the program monitor (I only see part of the picture). How can I fix this?
It is probably a simple question but I haven't been able to find an answer.
Kind regards

There are basically two ways (plus one variation) to address this.
Your stills are overly-large, for the Project Preset's Frame Size. You can apply the fixed Effect>Motion>Scale to Scale them to the Frame Size (1920 x 1080), or can check Scale to Default Frame Size (that's the variation). Or, you use a program, like Photoshop, to Scale to 1920 x 1080.
Until CS5, PrPro was not that good at Scaling, so PS was the way to go. Things changed with CS5, but one is still shoving around a bunch of pixels, that will not be needed, and this taxes the computer.
Good luck,
Hunt
PS - This ARTICLE will give you some background, and tips on doing the Scaling in PS.

EXIF: and TIFF: metadata is missing from XMP block in Lightroom 4

I've recently purchased Lightroom 4 and on the whole I'm very happy with it, but I have run into a problem. I have a few scripts which grab information from the XML-based XMP metadata block that's embedded in the DNG and JPG files that I use. I've found that images processed with Lightroom 4 no longer export the exif: and tiff: data.
To illustrate, a photo I exported with a previous version of Lightroom has the following data in the XMP block
   tiff:Make="Canon"
   tiff:Model="Canon EOS 40D"
   tiff:ImageWidth="850"
   tiff:ImageLength="567"
   tiff:XResolution="240/1"
   tiff:YResolution="240/1"
   tiff:ResolutionUnit="2"
   exif:ExifVersion="0221"
   exif:ExposureTime="1/800"
   exif:ShutterSpeedValue="9643856/1000000"
   exif:FNumber="71/10"
   exif:ApertureValue="5655638/1000000"
   exif:ExposureProgram="3"
   exif:DateTimeOriginal="2010-08-22T10:52:07.58+01:00"
   exif:DateTimeDigitized="2010-08-22T10:52:07.58+01:00"
   exif:ExposureBiasValue="0/1"
   exif:MaxApertureValue="4625/1000"
   exif:SubjectDistance="428/100"
   exif:MeteringMode="5"
   exif:FocalLength="80/1"
   exif:CustomRendered="0"
   exif:ExposureMode="0"
   exif:WhiteBalance="0"
   exif:SceneCaptureType="0"
   exif:FocalPlaneXResolution="3888000/876"
   exif:FocalPlaneYResolution="2592000/583"
   exif:FocalPlaneResolutionUnit="2"
   exif:PixelXDimension="850"
   exif:PixelYDimension="567"
There is, of course, a lot more information in the XMP block, but in a file exported using Lightroom 4 there is nothing in the XMP block with the exif: or tiff: namespaces so none of this information is available to any script which queries the XMP metadata. I'm pretty sure that the metadata is still there, embedded in the original EXIF data, as I can view it using the metadata panel in the Library module, but that's not accessible to my scripts as it's not in the XMP block. I've made doubly sure that the metadata has been saved and also double-checked all my settings and even tried to export the files multiple times with every different setting that I can think of (even though my current settings worked fine in previous versions) but the files never get the exif: or tiff: data.
I have called Adobe, but the best help they could give me so far was to post here and hope someone can help!

I just compared two JPEGs exported with LR 3.6 and LR 4.1RC. The tags you mentioned are exported neither by 4.1 nor by 3.6. These tags are only present in the normal Exif metadata, but not in XMP. Which version of LR 3.x did you use before? Perhaps Adobe changed something already in the later versions of LR 3.x. If this is the case, you have to use a script or tool that is able to read the Exif metadata directly.
In the XMP metadata in the file exported by LR 3.6, I see only crs (camera raw), aux (e.g. serial no.) and some other XMP namespaces, but no exif or tiff.
P.S. I viewed the metadata of the exported files with exiftool. File format was JPEG (with "quality" setting, not with "limit file size", because apparently there are still some XMP differences between these two modes).

Cannot write exif and tiff metadata in image file

Hi,
I have a public XMP text file containing exif and tiff metadata: http://ns.adobe.com/exif/1.0/ and http://ns.adobe.com/tiff/1.0/.
I want to write these XMP data in an image file and it doesn't work. I don't get any exceptions, just the metadata are missing in the image file.
C#
using (var xmpFiles = new XmpFiles())
      if (!xmpFiles.OpenFile("test.jpg", handler.FileFormat, OpenFlags.OpenForUpdate))
          xmpFiles.OpenFile("test.jpg", FileFormat.Unknown, OpenFlags.OpenUsePacketScanning | OpenFlags.OpenForUpdate);
     using (var xmpCore = new XmpCore())
          xmpCore.ParseFromBuffer(xmpPublic.ToString(), ParseFlags.None);
          if (xmpFiles.CanPutXmp(xmpCore))
               xmpFiles.PutXmp(xmpCore);
     xmpFiles.CloseFile(CloseFlags.None);
Public XMP:
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description xmlns:_ns_2="http://ns.adobe.com/tiff/1.0/" rdf:about="">
    <_ns_2:ImageLength>4252</_ns_2:ImageLength>
</rdf:Description>
<rdf:Description xmlns:_ns_3="http://ns.adobe.com/exif/1.0/" rdf:about="">
    <_ns_3:ApertureValue>8/1</_ns_3:ApertureValue>
</rdf:Description>
</rdf:RDF>
Result XMP in image file:
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""/>
</rdf:RDF>
Does anyone can help with that problem?
Thanks,
Alexandra

I found the answer by myself.
According to the last guidelines from metadata working group, exif and tiff data should not be saved as XMP data in jpeg images anylonger because jpeg natively supports exif data.
"The most recent (as of mid-2010) XMP specification describes the usage of Exif/TIFF properties within XMP itself. Both Exif ( http://ns.adobe.com/exif/1.0/) and TIFF ( http://ns.adobe.com/tiff/1.0/) namespaces have been defined so that corresponding Exif properties can be stored. This is particularly useful if Exif properties need to be stored but the file format does not support native Exif (e.g. PNG). [...]However, this document changes this earlier XMP guidance and recommends that Exif and Tiff device properties only be mapped into XMP in the case the file format does not support Exif natively."
See http://www.metadataworkinggroup.org/specs

How to separate RAW and JPEG files from shoot?

I'm a beginner at processing RAW files and would appreciate some help. I have concerns about moving files around in Lightroom and misplacing them. My question is:
I have imported 100 or so photos of a portrait session into Lightroom 4. Shot NEF + JPG on the card. i now have 50 pics of each file type - NEF and jpeg alternate. How best to separate file types, as a group say, in LR for best workflow post processing? I plan to work on Jpegs first and leave RAW files until later when I get some 'learning' time. Thanks.

Hi Jake.
This should be easy - make Smart collections - one with JPEG as filetype and one for RAW as inclusion criteria.
Be sure to rename the Smart collection something helpful like JPEG or RAW as the case may be.
Tony Jay

Importing raw and jpeg pictures in elements 11

Question on photoshop Elements 11? I shoot in raw and jpeg format. I rename photos of the days shoot with that days date for all photos. This creates renamed files with the same date and the numbers in sequence in paranthesis. Example 1130-2013 (1), 1130-2013 (2) etc. The photos have the same name for the raw as well as the jpeg file. However, when I import these photos into elements 11 the raw files do not have the same image as its corresponding jpeg file ( but both use the same file name example ( 1130-2013 (1) for the jpeg and 1130-2013 (1) for the raw file --but the pictures are not the same. Help me find out what is wrong me or the program??

I needed to test, as I almost never shoot in anything but RAW. When shot a couple of photos with my D300 in RAW+JPEG, and imported with a setting of Both (Separate Masters), the JPEG is on the left and the RAW on the right. Please review your settings in this regard, particularly in view of your other topic about not recognizing duplicates, as that makes be wonder if these two observations are related?
Ernie

Preview has difficulties with rotating EXIF rotated JPEGs

Ave!
I've been searching a lot here about this problem, but didn't found anything, so I decided to post here my bugreport.
If you are watching EXIF rotated JPEG images with Preview (e.g. your digital camera automatically rotates them) everything is OK, they are displayed in the correct orientation. But if you want to rotate them - well, then they don't act as the should.
Here is a sample video:
http://lka.hu/other/x/preview-rotate-bug.mov
Here are this pictures:
http://www.freeweb.hu/gk-lka/index.php?dir=GALLERY/Vegyes/Rotate_test
Their name reflects the angle which they have been rotated with.
Please (please!) correct this issue in the upcoming 10.5.3 release of OS X Leopard!

To start with, this isn't where you let Apple know about bugs. The proper place is the Bug Reporter, you access it by joining Apple Developer Connection. You can do it out here:
http://developer.apple.com/bugreporter/
There was a bug report on the Tiger version of Preview which I filed last year, it was a bit convoluted, but also involved rotation. I received a notice when they fixed it, with the release of Leopard. Here's the thread where the problem was discussed:
http://discussions.apple.com/thread.jspa?threadID=1111412
I just checked with a photo from my Canon digital camera, that had the orientation tag set to portait. As expected, opening with Preview displayed it in portrait view. I then rotated 90 and saved. It opened back up in Preview in landscape. Safari (which doesn't read rotation metadata) also displayed it in landscape, as did PS Elements, meaning that the rotation was applied to actual pixels, rather than just changing the metadata orientation tag. I then rotated it to 180, so it was in portrait, but upside down, and saved. It displayed upside down in Preview, Safari and Elements. Is this what you mean about a "bug"? Namely, that the rotation is actually being applied to the pixels, rather than just changing the metadata tag? If so, I'm not sure that it is a bug, or if that's the way Preview works now.
Francine
Francine
Schwieder

Account with an icon of a face and a question mark

Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% WindowServer
      3% hidd
      2% Safari
      1% Dock
      0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
Edoardo

Smiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best.

Performance issue and functional question regarding updates on tables

A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
     where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
            DO.
              " Lock the record that needs to be update with material creation date
              CALL FUNCTION 'ENQUEUE_EMMARCS'
                EXPORTING
                  mode_marc      = 'S'
                  mandt          = sy-mandt
                  matnr          = wa_marc-matnr
                  werks          = wa_marc-werks
                EXCEPTIONS
                  foreign_lock   = 1
                  system_failure = 2
                  OTHERS         = 3.
              IF sy-subrc <> 0.
                " Wait, if the records not able to perform as lock
                CALL FUNCTION 'RZL_SLEEP'.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            " Update the record in the table MARC with material creation date
            UPDATE marc SET zzdate = wa_mara-zzdate
                       WHERE matnr = wa_mara-matnr AND
                             werks = wa_marc-werks.    " IN s_werks.
            IF sy-subrc EQ 0.
              " Save record in the database table MARC
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait   = 'X'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'S'.
              " text-010 - 'Material creation date has updated'.
              wa_log-message = text-010.
              wa_log-zzdate = wa_mara-zzdate.
              APPEND wa_log TO tb_log.
              CLEAR: wa_return,wa_log.
            ELSE.
              " Roll back the record(un save), if there is any issue occurs
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'E'.
              " 'Material creation date does not updated'.
              wa_log-message = text-011.
              wa_log-zzdate = wa_mara-zzdate..
              APPEND wa_log TO tb_log.
              CLEAR: wa_return, wa_log.
            ENDIF.
            " Unlock the record from data base
            CALL FUNCTION 'DEQUEUE_EMMARCS'
              EXPORTING
                mode_marc = 'S'
                mandt     = sy-mandt
                matnr     = wa_marc-matnr
                werks     = wa_marc-werks.
          ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards

Is it possible to create a script to produce a high res and low res pdf and jpeg from Indesign at the same time

Hi, I'm just wondering if there is a way to automate a long process I have to do to create assets for my job.
I have a single page InDesign 6 file which I have to output three ways:
A low res pdf without bleed or trims
A high res pdf with bleed and trims
A low res jpeg downsized to 2% of original size.
If anyone knows if this is possible I'd love to hear from you.
Thanks in advance

Automation requires creating your own IDML script for output. Scroll down on this page to the section on Scripting resources. The text is a bit confusing. It says InDesign CS5 Scripting resources, but then the paragraph for that section says the PDF files are for CS6. I haven't read through these, I just found them by searching for "indesign automation". It does say in part that is can be used for preparing files for printing, so once you figure it out, it should be a single click option to do all three steps.
You can do them now with the menus you have, assuming you also have Acrobat Pro installed. With any document open, choose File > Adobe PDF Presets, and choose either from the prebuilt defaults, or create your own in the Distiller. However, I don't see a way in the Distiller settings to choose whether or not to include bleed and marks, so I'm not really sure how you'd have them on for one and not the other. As far as JPEG output, that can be chosen under Export. You get a choice to set a resolution and JPEG quality level, but not a size, so the output will be the dimensions of the document.

The raw portion of a referenced master got separated from its jpeg pair when I was relocating originals. Can I recombine the raw and jpeg pair?

Hi, I'm a fairly new Aperture user and have just started storing my photos on an external hard drive. An error message appeared when I was relocating originals of a project. It stopped relocating at one image, saying that the jpeg file did not exist. I found the raw file name under the new project folder that I was relocating it to, but it's jpeg pair did not move. The file names look identical except one ends in .JPG and the other as .NEF. I tried to combine originals, but I got the same error message and when I looked at the files the raw now had (1) attached to it, whereas the jped didn't. The Aperture window started to close unexpectedly many times. I tried Repair Permissions and Repair Database and that seemed to stop Aperture from closing unexpectedly, but the raw and jpeg pair are still in separate folders. How can I get them paired up again or does it matter? I'm using Mac OS X and Aperture version 3.4.5.
Thanks,
sophie

If you don't take care when choosing the location for referenced images, you can create some problems for yourself.
From an operational perspective 'Managed' images means Aperture will take care of the image file storage for you, 'Referenced' means you will take care of it yourself.
There are a number of things that may have happened but this is what I think is most likely:
If you shoot a lot of photos with the same brand of camera, eventually you'll end up with duplicate file names, for example two different files called DSC_1234.NEF. If you attempt to store these in the same folder yourself, worse case scenario is you may inadvertently overwite one of the files. If you use Aperture to relocate, you'll get one of the files with a new name of DSC_1234 (1).NEF.
So your first step is to figure out what these files really are. Are they duplicates, or are they different files with the same name, and do they each have a matching .JPG
Aperture has the tools to fix up the problem, but you need to confirm what the problem is first.
If you don't have many of the (1) files, it may be worth continuing your 'relocate' to subfolders - making sure your subfolder hierarchy doesn't cause duplicate names to be stored together. Then when everything else is stored correctly, address the problem images by moving them to where they should be, with the right name and the JPG/NEF pairs together.
You can then search for missing files in Aperture and use the 'Locate Referenced Images' to reconnect them with Aperture.
Andy

How can i restore my iphone 5s as i forgot my icloud password and sec questions

I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>

First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

How can I convert the files in my ipod to the original mp3 and jpegs?

My computer recently crashed and my ipod has most of my photos, music and contacts. I am using windows OS and my question is how come you guys dont have software that will covert IPOD's files to windows viewable/playable formats?
This is very unfair since millions of people buy your products and you have only a one sided solution (Mac users only). What about all the Windows OS users?????
Thank you
Ted and Sue
30 gig nano Windows XP

Do you need some help with something?
This is a technical support forum for getting help with specific problems.
how come you guys dont have software that will covert IPOD's files to windows viewable/playable formats?
Who are "you guys" you are talking to?
We are all just users like you.
iTunes converts files into useable formts for the iPod.
If the iPod crashes, reload from iTunes. If your computer crashes, use the backup files of your music folder you created.After all, you did read the documentation and make backups as recommended, correct?
If you did not make the recommended backups, you could try Yamipod (google it).
Thiw will allow you to get the stuff off your iPod and back into iTunes.
This is a forum for users of Apple products, not a place to complain to Apple.
Do that here -> iPod product feedback
This is very unfair since millions of people buy your products and you have only a one sided solution (Mac users only). What about all the Windows OS users?????
WHat is the one sided solution for Mac that Apple has developed?
I think it's unfair that you blame Apple for your problems since they recommend you backup your music library and you did not do this.

EXIF and JPEG QUESTION

Similar Messages

Maybe you are looking for