Exit/Badi for F110 transaction
Hi experts,
in the F110 transaction, is there an exit or badi to insert custom check during the proposal?
Thanks and regards.
Antonella
Hi,
thanks for you reply, but this exit doesn't pass to F110 during the creation of proposal; others idea?
Thanks and regards
Antonella
Similar Messages
-
User exit/ badi for fb02 transaction
Hi,
what are the appropriate user exit/ badi for fb02 transaction for a disabling(graying out) a
payment block field for particular users..?
Regards,
AviFollowing are the exits available for FB02
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment) -
User exit/Badi for MM41 transaction
Hi guyz,
Could you please tell me any User exit or badi for MM41 transaction, which will be triggered at the time of SAVE Article?
Thanks,Hi guyz,
Could you please tell me any User exit or badi for MM41 transaction, which will be triggered at the time of SAVE Article?
Thanks, -
User Exit / BADI for MEK1 transaction
Hi All,
Can anybody help me to know UserExit or BADI for the transaction MEK1?.
Thanks
Rgds,
SudhakarUser Exits for the Tcode MEK1 are
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Individual customer source determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Hope this helps -
User exit or BADI for F110 transaction
Hello, i need a user exit or badi for the F110 transaction with the objective to shoot workflow of approval of payment proposal.
Hi Mathias,
Welcome to SDN.
Please check this link for sample code to find user exits and BADIs for a given transaction code.
User Exit
Hope this will help.
Regards,
Ferry Lianto -
User exit/BADI for VT01n transaction
While creating the shipment through the transaction VT01n, the user selects shipment type manually. Its possible that user can make a mistake & will not select the correct shipment type. So I've ti implement a validation control in it to make sure that if the ship-to-party start with XX then the shipment type has to be ZSTO & if not starting with XX then the shipment type has to be 0001. This thing will be checked in the shipment overview screen. If anyone has worked on it or can help me, please help me with the exit/BADi name with the maximum details. If anyone has already worked on it, please provide me the coding.
suitable points will be rewarded.
Thanks & regards:
Gauravhi
Enhancement
MV56AINI Initialization of transaction control for transportation
V56USVDP Preparation for updating new objects for transport?
V56USVDO Update new objects for transport
V56USTAT User-individual definition of transportation planning status
V56UNUMB Shipment number allocation
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO Check shipments are complete
V56UCHCH Shipment processing: Check whether changes were made
V56TDLIF Filter Delivery Items for Shipment
V56SLDET Shipment processing: Leg determination
V56MVT04 Extensions for Collective Processing of Shipments
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
Business Add-in
BADI_LE_SHIPMENT BadI: Shipment Processing
BADI_V56N User Exit Transport - Message Determination -
To find out user exit/ badi for the VT01n transaction triggered in Save
Hi Friends,
I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
Thanking a lot in advance for giving the solution.
With Regards,
Ajit.Hi,
This code will give you all the user-exits.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc <> 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc <> 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Feel free to revert back.
--Ragu -
User exit or badi for me52n transaction.
Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards -
Exit or Badi for Migo transaction for given condition
Hi,
I need exit or Badi for MIGO transaction for the following condition ( When the goods receipt for the PO is initiated, prior to posting the accounting document).
Please let me know
Regards
RameshHi
In rel 4.6C you can find these BADIs:
- MB_DOCUMENT_BADI or MB_DOCUMENT_UPDATE
and these exits: MBCF0002, MB_CF001
Max -
User Exit / Enhacement / BADI for MB1B transaction
Hi all,
Movement type -311
Plant 1004
Storage Location - XXX
Now reuirement is like during Transfer posting when user provides Receving Location and Material and Press Enter
batch and qunatity should be automatically populated based on some Selection.
I checked BADI but no BADI is available when user press Enter.
Please suggest me with Enhancement Spot , User Exit for this requirement.\
Thanks in advance.
Harsharandeep SinghHi Harsha,
Try these User Exits/Enhancements.
Following are the BADIs for MB1B transaction:
ARC_MM_MATBEL_CHECK Check Add-On-Specific Criteria for MM_MATBEL
ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_LMBMBU04 posting of gr
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI BAdIs when Creating a Material Document
MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
Following are the user exit for the same:
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
Vishnu. -
User Exit / BADI for Transaction IW31 to create a POP-UP.
Hi,
I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.Hi!
In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
Regards
Tamá -
User exit / badi for transaction appcreate
Hi,
Can nyone help me in getting user exit / badi for transaction appcreate .
Cheers
kamleshHi Kamlesh,
Try below code to know the userexits for the given trxn code.
Regards,
Raj
*& Report ZTESTRAJ_USEREXITS
REPORT ztestraj_userexits
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
ENDFORM. " display_results -
How to find the list of USER-EXITS or BADI for the transaction ABSO
Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanarajHi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE. -
Reg. Exit/BADI for changing item data of PO in ME22N
Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan KThanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header - im_header->get_items
2. Loop the item list and get the line item record - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K -
Exit/Badi in the transaction of production order create or change (CO02)
hi all,
I need an exit/Badi in the transaction of production order create or change (preferably during SAVE).
I want to change structure AFVGD-usr02,AFVGD-usr03 .
<b>PPCO0007 Exit when saving production order</b>
the exit is not applicable EXIT_SAPLCOZV_001 .Hi
we around 200 exit for this tcode i found only three badi for this tcode.
AFABD_CHANGE Change Relationship
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
SIDAT_UPDATE Change date of price simulation.
check with this goto se18 and F4 thn give the Package as CO.enter u get this three.
reward pointd if use full
Maybe you are looking for
-
How can i get report of Vendor balance depending on business area? Moderator: Please, avoid asking basic questions
-
Help! Can't email pages document in pdf
I'm trying to send a one-page letter that is to be inserted into a book. The recipient needs the document in PDF format. I saved it in PDF but when I try to attach it, the whole text prints out into the email instead of a link to an electronic pdf
-
Duplicate to check the duplicate record
We are loading master data hierarchy(alternate).. Already we loaded parent hierarchy . Now we loading subunit(child or alternate) just a small change from the parent one. We already loaded parent hierarchy now we plan to load alternate will it create
-
Simple Question (sorry I have not gotten the latest book yet - if the info is there). When I use a higher MP DSLR like the Canon 5D Mark II... I only get one option to uprez (from 21. to 25.2) in ACR 6.1. I want to know if in this situation (choosin
-
Re-execute a single SQL Report on Multi-Report page
Hi, I have a Page containing 3 reports and I was wondering if it is possible to re-execute only one of the these reports using a button or preferably a Select List which allows me to choose which of the 3 reports I wish to 'refresh/re-execute'. I may