Expanding Control for One Device to Ten Device

Hi
Right now I'm working on a project where I have to modify the LabVIEW code written by someone else. The code is already proven to work for just one device, and I have to figure out a way to make it such that can control ten devices. I'm thinking of using the current code, and adding a drop-down box with device names 1-10 and when clicking on each individual one, the input and indicator values will change accordingly.
However, I have a few questions about implementing this.
How do I handle the DAQ assistances such that when I change the device number in the drop-down box, that I don't change the actual input, only have the input shown (i.e. make sure the input to the actual devices are what I want but it only shows on the front panel the values for whatever device number I select). Would I need multiple DAQ assistances?
With regards to the drop-down menu, would a normal drop-down menu be best, or is the better option to go with an enum or a listbox?
Thanks

Try avoiding multiple DAQ assistants. Actually, I would recommend using the DAQmx VIs instead, because, they offer more control and higher performance. If you would like to keep using the DAQ assistant, you can follow this instructions, simply add more channels using the blue plus icon. Make sure the device name in MAX and the DAQ assistant match with the hardware. If you have problems with this use the green arrow, on the channel settings section, and select the physical channel that you are targeting. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

Similar Messages

  • HT1495 Multiple logons for one computer and multiple devices trying to use one itunes account.

    I have one computer with a logon for Kids and one for Adults.  There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account.  I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?

    It sounds like each Windows user has it's own iTunesLibrary.itl file.  If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
    If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected.

  • Is it possible to have filters for one account on 3 devices ? And have the same results/folders.

    I have one email account on 3 devices and I need to filter all received emails, on all 3 devices. Same folders and same filters.
    If I create a filter rule on one PC then I can't find the filtered emails ( that are in the new created folder on PC no.1 ) on the other devices. What can I do?

    To answer the question as stated in your topic, it's possible but not easy.
    Obviously you can enter the same filters by hand on each installation of Thunderbird, but it's tedious and error-prone. You can set them up on one machine and copy the filter files over to the other machines. Also tedious and error-prone.
    The way you describe the messages vanishing from sight suggests strongly that you're currently using POP, and this has no way of making use of shared folders. To continue working in this way, all you could do is set each client to leave a copy on the server for the others and painstakingly manage a set of filters on each and every machine, keeping them in synch by hand and careful management. (And ditto for your folders.) You'd also have to attend to the POP server from time to time to remove accumulated messages left there by your clients.
    The real answer to this and your later question is to use an IMAP-connected account, where all your data lives in one place, on the email provider's server, and all your devices simply look at and work with one common set of data. Any filtering, editing, moving, etc you did on one machine would very quickly become visible on the other machines. In fact. the ability for more than one machine to be simultaneously be working on the same message becomes a somewhat worrying possibility. It's not clear if this is a likely event in your scenario.
    Even using IMAP, if you filter at the client then you'd still have the issue of managing multiple instances of your filters, and the final part of this is to make use of filtering offered by the server; then the filtering takes place "at source" and you have just one filter set to maintain.
    If your current email provider doesn't provide IMAP, and cannot offer it, then there are many alternatives who will. If it's for business then I think you should look for a paid-for service that includes guarantees, backups and an SLA. Your domain provider should be able to offer this.
    For personal use, many of the free suppliers are worth considering. Googlemail works well, but if you're uneasy about their pervasiveness, have a look at gmx/1&1. Microsoft's hotmail/live mail/outlook.com offers IMAP. Yahoo! probably does (please check in your locality) but they have a bad track record and a lamentable reputation and I wouldn't want to entrust them with any precious material.

  • Can I use multiple IDs for one iTunes and multiple devices

    We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes  account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
    Thanks for any advice

    I forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet

  • Help needed - OBIEE - Level Based Hierarchy - Expanding Month for one year affects all previous years

    I am creating a level based hierarchy for the Date Dimension
    year --> quarter --> month --> date (one path)
    year .--> month --> date (the second path).
    I create the pivot table using these dim hierarchies. But the problem is,
    when I click on, say "Month" under year 2012, it expands everything above 2012 (such as 2010, 2011 etc).
    I don't want to expand all the years, but only the one I clicked. Anyone knows what is the solution for that.
    I am sorry that I cannot attach any screen shots to explain better.
    I would really appreciate your help on this.
    Thanks
    JD

    I am using OBIEE 11.1.1.7.0.
    ok, I tried one hierarchy per dim table but didn't work too. When I created a logical column as Month + Year (e.g Jan 2014) and added to the hierarchy, its working fine. But that creates other issues on the
    client side.
    I guess, since the month is common to all the years its expanding when clicked. I also added month and year as "chronological key", but that didn't work either.
    Please advice any solution if you know it.

  • How do I set up timed access control for a time past midnight

    I would like to set up timed access control for a number of my devices that would stretch past midnight...   An open network from 6AM to 2AM - effectively only blocking access from 2AM tp 6AM in the morning....
    Any notion on how to do this?  the timed factily does not like the setting to enable 6A to 2A, says the times are invalid. 
    Setting up timed access from 6AM to 11:59P, then doing another from 12A to 2A causes a service "hiccup" of 1 Minute.

    Set up each device as follows:
    Everyday........Between.......6:00 AM and 11:59 PM
    Add a second rule for each device that will state....
    Everyday.....Between.......12:00 AM and 2:00 AM
    You might think that there would be a one minute break between 11:59 PM and 12:00 AM, but that will not be the case, at least on every AirPort that I have ever programmed..  Reason.....11:59 is really 11:59:59:59 turning off at 12:00 AM.  But, you have a second rule to allow access at 12:00 AM, so the AirPort will be "on" at the same time the first rule ends, so there will be no break.
    If you really want the second rule to turn the AirPort "off" at 2:00 AM.......then set that time for 1:59 AM. If you set the rule for 2:00 AM, then AirPort will really turn off at 2:01 AM.

  • I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook

    I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook with duplicate contacts. Is there a solution. Is there selective synchronisation available?

    Make sure you don't have any notes that have no content or subject or this can prevent syncing with Outlook.  If you do, delete them.
    If you don't, try unchecking "Mail,Contacts,Calendars & Tasks with Outlook" on the iCloud control panel for Windows, choose Delete at the prompt (the data will still be in iCloud), restart your PC, then go back and check this setting again.  (Your iCloud data will reappear in Outlook after a brief delay as it redownloads.)
    Then create a new note on one of your iOS devices and see if it appears in the Notes folder in Outlook mail after a few minutes.

  • How many iPads can be controlled by one device using keynote remote

    How many iPads can be controlled by one device using keynote remote?

    ask your question in the iWork for iOS  discussion
    iWork for iOS

  • I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?

    Tango Remote Control Music Player HD
    I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?

    An iPod touch is an iOS device.
    Why not contact the developer of the app?

  • I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

    I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

    Hi!
    We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
    manage mobile devices with Intune.
    Error message on Intune Portal:
    "Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
    Repeated: 19 times.
    Class: (System) Policy
    Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
    2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
    That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
    Br.
    Jukka

    Hi Jukka,
    Mobile policy doesn't apply to clients using the Full Client download.  Please open a support case so the team can assist in further troubleshooting.
    Thanks,
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • I have 3 apple devices and I use the same apple ID for all 3.  I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device.  Anyone know how I can do this?

    I have 3 apple devices and I use the same apple ID for all 3.  I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device.  Anyone know how I can do this?

    Create a new ID:
    On the iPod go to
    - Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
    - Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
    - Settings>iCloud and sign out and sign in with the new one
    - Settings>iTunes and App Store and sign out your ID and sign in with the new one.
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

    I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
    == This happened ==
    Every time Firefox opened
    == I attempt to access a web front end on an IBM SVC device

    You can't use the same certificate more than once.
    See also [[Certificate contains the same serial number as another certificate]]

  • TS3510 I have 3 different apple devices using the same Apple ID and would like to use FaceTime to call from one device to the other.  Do I need a different Apple ID for one of the devices in order to do that?

    I have 3 different apple devices (iPod Touch, iPad and MacBook Pro) using the same Apple ID and would like to use FaceTime to call from one device to the other.  Do I need a different Apple ID for one of the devices in order to do that?

    I found this on a related question in the Community:
    Yes you can do it. I do it with 4 different devices all using the same Apple ID.
    You need to associate different email addresses for each device in order to use those email addresses as the "contact at" email address. The reason the calls are dropping on you now is that what you are trying to do is like calling yourself on your own phone.
    You can also create new iCloud accounts on each device simply to use for FaceTime, but I'm guessing that the users of the other two devices have their own email addresses which will make this work for you quite easily.
    Take a look at this for more information.
    The seems to go against what Gail said and the issue you raised about buying dup apps was my first concern.  If this other post is correct, how to I set a different "contact at" in the iPod Touch?
    Goose

Maybe you are looking for