Expecting Suggestions !!! Career Shift from SAP Business Development to SAP R/3 Pre Sales

Hello Everyone,
I have been working as SAP Business Development Executive, with 5 years of Sales Background.Engaging with selling different SAP products. I feel, I should shift my profile as SAP R/3 Pre Sales Consultant, as i always passionate about to give high level consulting to companies rather than doing ground level sales job. What would be the right steps needed for this shift.Am open to work hard and learn new stuffs.Expecting your kind suggestions.Thanks in advance.
Regards,
Rajiv

Better get trained in area of domain experience and get SAP certified.
Check also this links
Career Advice: SAP Business One to R3 transition in Ottawa Canada
SAP B1 or R/3...which one to select
http://it.toolbox.com/blogs/sap-library/sap-business-one-vs-sap-r3-system-architecture-13952
http://it.toolbox.com/blogs/sap-business-one/sap-business-one-training-isnt-that-the-same-as-r3-9066
Contact nearest SAP education partner for getting trained.
http://www.siemens.co.in/en/about_us/index/our_business_segments/information_and_communication/sisl_business_profile/education_training/general_faq.htm
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm

Similar Messages

Hi Experts confusion on migration from "SAP Business One" to "SAP R/3"

Hi All
I am a certified SAP Business One Certified Solution consultant and working on SAP Business One for the past 2.5 yrs and done 4 implementations.
I want to migrate to SAP R/3 and have confusion on weather to join Project Systems/Material Management for training and pursue my career in the same. I want to do the Online Certification for the same.
I feel like Jack of ALL and Master on None after working on SAP Business One.
Pls guide me on the possible R/3 career options after SAP Business One and weather my experience in SAP will be counted for my future SAP career.
I am confused Pls help.

Better get trained in area of domain experience and get SAP certified.
Check also this links
Career Advice: SAP Business One to R3 transition in Ottawa Canada
SAP B1 or R/3...which one to select
http://it.toolbox.com/blogs/sap-library/sap-business-one-vs-sap-r3-system-architecture-13952
http://it.toolbox.com/blogs/sap-business-one/sap-business-one-training-isnt-that-the-same-as-r3-9066
Contact nearest SAP education partner for getting trained.
http://www.siemens.co.in/en/about_us/index/our_business_segments/information_and_communication/sisl_business_profile/education_training/general_faq.htm
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm

SAP NetWeaver Developer Workplace & SAP NetWeaver Developer Studio

Hi All
1. What is the difference between SAP NetWeaver Developer Workplace & SAP NetWeaver Developer Studio. Which area JDI (Java Developer Infrastructure) fall in.
2. Is SAP NetWeaver Developer Workplace & SAP NetWeaver Developer Studio
are tool for Enterprise Portal development/customizing Only or can you use also use to customize XI/BW/SRM etc..applications.
3. Is SAP NetWeaver Developer Workplace & SAP NetWeaver Developer Studio are replacement of old ABAP programming
Thanks everyone.

Julio,
To answer your third question, No, NetWeaver Developer Studio (NDS) isn't to replace ABAP or ABAP workbench. NDS helps in creating Java based applications to compliment with the ABAP programs and enable them accessible via the Enterprise Portal. ABAP would stay to be the primary development language for SAP systems. The newest version of NetWeaver software also come with an option of ABAP stack where in you can develop web based applications (accessible via the portal) using ABAP
Cheers,
Kiran

Difference btw SAP Business ByDesign Vs SAP On Demand

Hi,
What is the difference between SAP Business ByDesign Vs SAP On Demand?
Regards,
Shaik

Unfortunately it doesn't work.
The situation looks as follows:
- I add a new business object (BO) to a project. Copernicus crashes immediately.
- Next time I open Copernicus and can see the just created BO in the Solution Explorer pane.
- The BO can be deleted, cleaned, checked via the context menu.
- But it can't be activated (because it is not saved).
- It can't be saved, because all Save buttons are disabled.
- It can't be opened, because Copernicus crashes immediately.
I have the latest Copernicus isolated shell version (2012-01-27)

Career:Shift from ABAP to BW-Netweaver after business object takeover

Hi all,
Am an ABAPer with one and half years of experience.I will be thankful if sombody will tell me If its appropriate to move into BW-Netweaver as i heard BUSINESS OBJECT is likely to replace BW-Netweaver in near future.
Thanks.
Edited by: sandeep pande on May 12, 2008 7:18 PM
Edited by: sandeep pande on May 12, 2008 7:32 PM

Dear sandeep pande ,
BO was brought up by SAP and It will soon be included in SAP BI in next recent versions.SO its better to join BI. as it has more scope these days/
YOu should know the advantages of BI over BO
BO is the reporting toll of data warw house
BI is itself a data ware house.
the next generation SAP BI will be using BO as reporting tool instead of BeX.
BO is the reporting toll of data warw house.
on the front end it has CrystalReports.
this suit will be used in SAP as front end for EIM.
the latest version of BO is BO 11. 3.
BI is itself a data ware house.
the next generation SAP BI will be using BO as reporting tool instead of BeX.
For More Information check the following link
/people/kuhan.milroy/blog/2008/03/11/introduction-to-business-objects-suite-of-technologies
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
http://sap.blogs.techtarget.com/category/teched/
For knowing Overview of BI and go through BI certification follow these
If you are going to Start BI 7.0 courses
you could follow the books
TBW10 Datawarehousing concepts
TBW20 Reporting
TBW42 Adavnced Data warehousing concepts (authorization,Broadcasting,etc)
TBW45 Integrated Palnning
Online courses on APD,XI
Tamong these,TBW10 and TBW20 will be sufficient for you to start and know basic concepts
Overview of BI
http://www.sap.com/platform/netweaver/components/bi/index.epx
For more information please
refer these links
http://www.psimedia.ws
http://www.sap.com/uk/services/education/courses/bw.epx
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=285
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=458
http://www50.sap.com/useducation/certification/examcontent.asp
http://www50.sap.com/useducation/certification/curriculum.asp?rid=506&vid=5
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
Hope it helps,
Regards
Bala

SAP Business Workflow and SAP Netweaver Gateway - Missing extensible elements

Hello,
For a mobile project we use SAP Netweaver Gateway in order to retrieve information from workflows stored into SAP Business Workflow.
We are able to retrieve standard informations for a workflow but custom fields added into "Extensible Elements" section are lost when exit SAP NG.
We have checked the configuration of SAP NG (by 4 differents person) and it seems to be OK.
Do you have an idea why the custom fields are lost during SAP NG processing ?
Thanks in advance
Best regards,
Dominique

Hi Dominique,
FYI. SAP Fiori Approve Requests uses task processing service. This may help.
How to display application data in SAP Fiori Approve Requests app
Regards, Masa
SAP Customer Experience Group - CEG

SAP Business One in SAP NetWeaver Portal?

Hi,
We have a customer that will implement SAP Business One for their backoffice.
They want a package solution for their internet and extranet (clients and suppliers). The extranet will access SAP Business One.
We are considering to implement SAP NetWeaver Portal for the extranet.
Do you think this is possible? What about SSO?
Tahnk you all,
Olivier Marques.

Olivier,
I am not sure about the SAP NetWeaver Portal. You may want to ask that question in the NetWeaver Discussion Forum.
With respect to the SAP Business One Integration for SAP NetWeaver product ... this technology is not providing a portal in which to access SAP Business One from a web interface. The SAP Business One Integration for SAP NetWeaver is a technology that seamlessly integrates SAP Business One with mySAP with respect to the integration of transactions and master data flow between the two systems from a headquarters/subsidiary(s) standpoint.
HTH,
Eddy

SAP Business Objects and SAP Business Objects PCM

Hi all
We want to know if is recommendable to have Business Objects and SAP Business Objects PCM installed in the same server, and if is necessary to have a special configuration of the services for both applications?
Thanks in advance

Hi,
You can refer the below link for PCM Install guide:
http://service.sap.com/~sapidb/011000358700000225772009E/FPM75_PCM_InstallGuide_en.pdf
If you are looking for more info related to specific requirements then from the below link select BusinessObjects tab and select PCM category for more guides.
http://help.sap.com
-Noor.

Integration between SAP business one to SAP CRM, CRM to ECC 6.0

Scope: We have been told to prepare Integration process which is a part of out project plan. Here we have 2 business cases where our SAP XI comes into picture.
1.     SAP business One talks to SAP CRM through XI to exchange DMS business data.
2.     SAP CRM talks to SAP ECC 6.0 through XI to exchange master data.
Suggestions: What kind of adapters (includes proxies) do we prefer to get the data transferred in both cases with high performance level.
Appreciate your response with proper reward points.
Thanks,
Kumar.

Hello,
          you can use Proxies for performance benefit for transsferring data between CRM to XI and ECC to XI system.
         Also you can use ALE -IDOC communication between your ECC system and XI for master data communication

SAP Business Partner in SAP Interactive Forms

Hello,
when I use the addresses from the BAS in the interactive forms, I have noticed that in the properties window on the buttom I can enter values for SAP Business Partners.
What are these Business Partners? (just out of curiousity as I don't normally work with them)
Thanx!

hi vikram
plz seee below path for ur query
Occupatioanl health -- > basic data --> addresses
here u can create all business partners in Occupatioanl health (which u hav mentioned health center, physian etc)
i hope, i resolved ur query
thanks and regards
mandar sathe
00919764007574

Career shift from ABAP

Hi all,
I am an ABAPer withone and half years of experience.
I have worked on ALV Reports,BDC's,Enhancements,BADI's,Modulepool,Smartform.
1)Can somebody guide me if its appropriate to move to some Netweaver component as i will be starting form zero in that component.
2)If yes then which Netweaver component is appropriate and are there enough projects in the market(India) as it makes no sense in learning and then siting on the bench.
3)Or its appropriate to learn some functional module like SD or CRM.
Thanks.

Hi Sandeep,
i agree with your statement that you learn something then you should nt be sitting on bench. But here the important thing to learn is aptitude and some experience when you think of functional modules particularly. I really feel you should be going into Netweaver components for two reasons,
1) you are already a seasoned technical guy so you can easily understand the the technology.
2) yes there are many oppurtunities for Netweaver components like EP, XI now PI etc. This is your cup of tea.
You can think of getting into SD or CRM if you had some selling experience. This is not say that you cant do without that since there are already people doing it this way but the level of excellence would be different. Though excellence may be debatable but its true. This is what i feel.
regards
sadhu kishore

SAP BW Developer Vs SAP BW Architect

Hi,
What is the difference between designitations of
BW CONSULTANT
BW DEVELOPER
BW ARCHITECT
Please specify roles and respon....
Thanks

BW King,
A BW Architect would be the person that does much of the data modeling for your BW implementation. This would involve looking at the technical requirements, and then determining what (if any) standard cubes would best suit the requirements, analyzing what changes would need to be made to them, and coming up with an overall strategy for the BW reporting solution.
A BW Developer would be the person that takes this overall strategy and makes it a reality.
A BW Consultant, generically, could be both an architect, developer, or whatever else the client wanted them to be.
Overall, I imagine very few people label themselves exclusively as a developer/architect. Most people will bounce between roles all the time.
Hope this helps
Michael

Send IDOC from Business Connector to SAP faster

Hi Developer!
I need to send a very lot of IDOC converted from XML files from the Business Connector to SAP. The XML files are in different directories pro business partner, but they have a same type (ISU_MSCONS).
My problem, that the import take a lot of time. Only in every 3 seconds (IDOC creation time) gets (or works up?) the SAP one IDOC. I start diferent services pro partner at the same time to import the IDOCs, but I couldnt short the 3 second work time in the SAP. So you can count it easy, that in 1 minute I can import 20, in 1 hour 1200, in 1 day 28800 IDOCs instead of 100.000.
It is really parallel import? Have anybody any idea to make the import more faster. I know (asked the SAP Administrator) so, one BC - SAP connection (Program_ID) has more pools (= threads) in the SAP at the same time.
Thanks any help,
Charlie

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

SAP Business Object Methodology

Hi Experts,
I'd like to know which are the methodologies to implement SAP Business Object, excluding SAP BW and includin SAP BW. I know for SAP the ASAP methodology is used, but I don´t know for SAP BO.
Greetings & regards,
Leonel

>
Leonel Massiccioni wrote:
> I'm going to implement Xcelsius, Web Intelligence, Crystal Report and Live Office on Windows.... But I need to konw the ways or methodologies to implement BO....
Hi leonel, that's good. But once again, you need to indentify the following first...
1. Who are the target audience (i.e. the end-users)?
2. Who are going to develop the reports using those tools? Is it centralized (by BI developers or IT developers) or self-service (by the end-users themselves)?
3. What skill set do you have in-house? Do they know know how to use those tools? Do they need training?
4. Where are the data sources? Are you going to build a reporting data mart? Do you have the in-house resources to do so?
5. Do you have the in-house resources to build the semantic layer (i.e. the universe which is the heart-and-soul of BusinessObjects)?
These are just the initial questions. More will come up when you get deeper into the process. Not until you can answer all these questions, you cannot proceed. I also would like to emphasize that, while you can have a general guideline, there is really no cookie-cutter, one-size-fits-all implementation plan. It varies from company to company. You need to sit down with all the stakeholders to come up with a good plan. And once again, you should consider bringing in hire-gun to help you out. It is very important to do it right at the beginning.
If you are using the BusinessObjects tool, you should join [ASUG|www.asug.com]

Please only post SAP Business Objects products related questions here

Hi
Thanks for reading.
Unfortunately many people get confused with the term BI which was used for SAP BW at one time. With the acquisition of Business Objects some product names have changed.
SAP BW is still SAP BW, please post in the respective forums: /community [original link is broken]
Business Intelligence in this forum refers to the these SAP Business Objects products:
SAP Business Objects Enterprise
SAP Business Objects 4.0
SAP Business Objects Intelligence Platform 4.0
For more information and great articles and videos please see:
http://www.sdn.sap.com/irj/boc/bi
Kind Regards
Roland Hoeller

>
Suresh Babu Aluri wrote:
> Hi,
>
> You can create All prompt in lovs of reuired object as
>
> do the following steps for all prompt creation.
>
> 1. Go to Object to which the lovs are mapped. -> select object -> properties -> advanced (not sure) -> edit lovs -> then a query panel will display and it will have query like
>
> select distinct(..........) from ......................
>
> change the above query to
>
> select distinct(..........) from ......................
> union
> select 'all' from dual -> dual is temporary table in oracle (you define a temporary table w.r.to database)
>
> 2. In designer go to the object on which prompt is defined.
> i.e.
>
> may be in selecor where clause you might defined prompt as
>
> .............. @prompt('Member Name')
>
> so change that to
>
> .................. .............. @prompt('..Member name')
> or
> 'all' in @prompt('Member name')
>
> 2. For your second requirement the max no lov values are changed in prm files. For that go to programs -> BO -> BO ii.5 or ur version -> dataaccess->win32_x86-> based on ur back end select required folder -> search in *.prm files to change the max no lovs.
>
> Cheers,
> Suresh Aluri.
Hi Suresh
Thank you for the detailed response. I tried your suggestions and neither works.
LOV issue:
Within the Business View manager, i right-click on the LOV object and click "Edit List of Values..." and i get a dialog box that only shows me Available fields, List of Value Fields used, description field, and Referenced objects. Along with buttons for Clear Instance & Refersh Status.
I have read similar posts to what you suggested but never get to the same place as described.
Please advise....
as for _Max Number LOV _
I have researched this as well and found the same suggestion you made. But the PRM file does not have that value, and the file contains all XML code
Now what???
Thanks
Mike

Expecting Suggestions !!! Career Shift from SAP Business Development to SAP R/3 Pre Sales

Similar Messages

Maybe you are looking for