Exploring Web Services with Dreamweaver CS4

How can you explore web services with Dreamweaver CS4? You
used to be able to go under Components and add Web Services and
enter the url for the WSDL (ex.
http://www.communitymx.com/content/article.cfm?cid=70AAB).
How do you do that now in CS4?

Yeah, I knew there were several workspaces. I tried them all
but none showed the Components/Webservices tab.
That was an important tab for me since I do a lot of work
with cfcs in connection with Flex Builder 3.
I just hate having to go on Easter Egg hunts to find the
functions that have been there for years.
Like now I cannot copy and paste some code from one file to
another and the command tab bar is gone for the CFML commands.
It's just a real pain in rear end to have waste a bunch of
time locating where someone decided to bury stuff.

Similar Messages

Synchronize problem with Dreamweaver CS4

Hi all,
I was wondering whether any of you can offer any advice or help with a problem I have with Dreamweaver CS4.
The problem is regarding the Synchronize feature within Dreamweaver, for example after I have made a change to a web page and want to upload this to the internet, the software detects what files have changed which is fine but against the file it has the word and symbol called "Resolve" and this is where I am stuck because I cannot click on the Resolve button to change it to "Put" because the icon is grey so therfore I am unable to upload any changes to any websites.
If anybody can help me then it would be very much appreciated.
Cheers
Daniel

Hi Hans- G
Many Thanks for this. I will go and have a look. It is strange as I have never experienced this problem before.
Cheers
Daniel

Consuming and Providing Web Service with JD Edwards ERP system

Hi,
I would like to create web services with c++ or java OR any other easier way .
I need to use that web services to use in Share point to interact with JD Edwards ERP system .
Pls Note : Since not having license for JD Edwards, I need to create and call from Sharepoint Web service to JD edwards.
and not from JD edwards web service.
Could anybody guide me in this.
Thanks in advance.

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

Exporting to Microsoft Excel from a DataView Web Part consuming a Web Service with Parameters

In Sharepoint Designer, I've developed a page displaying a DataView Web Part which consumes an XML Web Service with three parameters. These parameters are passed in from a simple Form Web Part containing three input fields. I am able to provide default values for the web service so the dataview is initially populated, and when I enter in new parameters, the web service goes back, grabs the requested data and displays in the dataview nice and slick.
The problem I'm having is this: In Internet Explorer 7, when I right-click on the DataView Web Part and select Export to Microsoft Excel, Excel opens up, says "ExternalData_1: Getting Data..." and returns the data from the web service which applies to the default parameter values each and every time, regardless of whether I have changed the parameters on the web page, and contrary to what the DataView Web Part displays on the screen.
Has anyone else run into this, and is there a solution to the problem?
Best regards,
Mark Christie

Hi Bullish35,
It's possible to provide single export button and export your 4 dataview webparts. Here's the modified code.
<Script Language="Javascript">
function isIE() // Function to Determine IE or Not
return /msie/i.test(navigator.userAgent) && !/opera/i.test(navigator.userAgent);
function exportToExcel() // Function to Export the Table Data to Excel.
var isIEBrowser = isIE();
if(isIEBrowser== false)
alert('Please use Internet Explorer for Excel Export Functionality.');
return false;
else
var strTableID1 = "detailsTable1", strTableID2 = "detailsTable2", strTableID3 = "detailsTable3", strTableID4 = "detailsTable4";
var objExcel = new ActiveXObject("Excel.Application");
var objWorkBook = objExcel.Workbooks.Add;
var objWorkSheet = objWorkBook.Worksheets(1);
var detailsTable = document.getElementById(strTableID1);
var intRowIndexGlobal= 0;
for (var intRowIndex=0;intRowIndex<detailsTable1.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable1.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable1.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
for (var intRowIndex=0;intRowIndex<detailsTable2.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable2.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable2.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
for (var intRowIndex=0;intRowIndex<detailsTable3.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable3.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable3.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
for (var intRowIndex=0;intRowIndex<detailsTable4.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable4.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable4.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
objExcel.Visible = true;
objExcel.UserControl = true;
</Script>
I haven't tested this. But it should work! :)Regards,
Venkatesh R
/* My Code Runs in Visual Studio 2010 */
http://geekswithblogs.net/venkatx5/

Issue with OSI PI WCF Web Service with wshttpbinding

Hi Experts,
System Details:
SAP MII 14 SP4
OSI PI Web Service: PITimeSeries
I am having issue when trying to call OSI PI web service using http post. it is returning status 0 when i am using exception handler in BLS.
Same web service works fine with basichttpbinding (SOAP 1.1) but with wshttpbinding (SOAP 1.2) it is giving error.
Following are Web config binding details for web service.
      <wsHttpBinding>
        <binding name="wsBinding_2011" sendTimeout="00:01:00" receiveTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
          <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" />
          <security mode="Message">
            <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" />
          </security>
        </binding>
      </wsHttpBinding>
I am not sure it could be the issue with passing windows credentials.
Did anybody consumed WCF web service with wshttpbinding with security mode as Message and clientCredentialType as Windows.
Also i was trying to pass MYSAPSSO2 SSO token to service in http post but first i am not sure if this is correct windows token and second which header property of service should be mapped and i am not sure that I am going into correct direction or not.
Please let me know what i am missing.
I have tried following other options and tools:
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as
                  The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per                                                                              my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Any help is appreciated.
Thanks & Regards,
Manoj Bilthare

Hi Sam,
The web service is valid following are details of testing on various tools.
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Please let me know if additional details required.
Thanks & Regards,
Manoj Bilthare

Calling Web Service with SOAP header from BPEL

Hi,
I am calling a web service (with header information) from BPEL. In the Invoke activity, i created a header variable to pass the header information.
But, when i test the BPEL service, invoke activity fails because the header information is not being passed.
Below is the error message (copied from clipboard).
+<messages><input><Invoke_1_getsubinfo_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters"><getsubinfoElement xmlns="http://ws/its/tabs/webservices/SingleRowWS/SingleRowWS.wsdl">+
+<pSubnoin>+
+<insubno>12345678</insubno>+
+</pSubnoin>+
+</getsubinfoElement>+
+</part></Invoke_1_getsubinfo_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke:+
start fault message:+
Internal Server Error (Caught exception while handling request: javax.xml.rpc.JAXRPCException: Not authenticated user)+
*:end fault message*</summary>
+</part></bindingFault></fault></messages>+
As said, no header information is visible in the Invoke activity.
Please provide help for the above issue.
-MJ

Hello Patrick,
Thanks for the response. I am using normal assign activity to assign values to the header variable as shown below. HeadMT is the header variable which is passed in the invoke activity.
+<assign name="Assign_Header">+
+<copy>+
+<from expression="'tkl12'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:USER_NAME" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'tkl123'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:PASSWORD" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'TKL'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:CHANNEL_ID" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+</assign>+
The expected input by the web service is as below with the header information highlighted.
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws/webservices/RowWS/RowWS.wsdl">+
+*<soap:Header>*+
+*<ns1:LOGIN_INFO>*+
+*<ns1:USERNAME>tkl12</ns1:USERNAME>*+
+*<ns1:PASSWORD>tkl123</ns1:PASSWORD>*+
+*<ns1:CHANNEL_ID>TKL</ns1:CHANNEL_ID>*+
+*</ns1:LOGIN_INFO>*+
+*</soap:Header>*+
+<soap:Body>+
+<ns1:substatusElement>+
+<ns1:pInparam>+
+<ns1:insubno>7674988</ns1:insubno>+
+</ns1:pInparam>+
+</ns1:substatusElement>+
+</soap:Body>+
+</soap:Envelope>+

Invoke web service with DTO

Hey guys,
I am quite new in using BPEL. My first test worked fine, but know I have an issue, which I can not solve. Invoking web services with a basic return value is no problem. I could also you a dto object including some basic variables in order to invoke the web service without having problems.
But when I have a dto object as return value, I get the following exception.
Could someone give me a hint to fix my problem...that would be great!
Thanks alot!
Sven
<messages>
- <input>
- <carReserveRequest>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="in0">
- <in0 xmlns="" xmlns:def="urn:TravelBooking" xsi:type="def:CarReservationDTO" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<carType>
Mini
</carType>
<customerName>
9
</customerName>
<customerPhone>
9
</customerPhone>
<reservationEnd>
2030-12-12T00:00:00.000+01:00
</reservationEnd>
<reservationStart>
2029-12-12T00:00:00.000+01:00
</reservationStart>
</in0>
</part>
</carReserveRequest>
</input>
- <fault>
- <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="summary">
<summary>
exception on JaxRpc invoke: trailing block elements must have an id attribute
</summary>
</part>
</remoteFault>
</fault>
</messages
Message was edited by:
user606281

Here is more information. Below are the relevant sections of the web service's WSDL which I am trying to call from BPEL:
- <wsdl:message name="getNextIDResponse">
<wsdl:part name="part1" element="ns0:getNextIDResponse" />
</wsdl:message>
- <wsdl:message name="getNextIDFault">
<wsdl:part name="part1" element="ns0:SOAPExceptionFault" />
</wsdl:message>
<wsdl:message name="getNextIDMessage" />
- <wsdl:portType name="GetUniqueIDPortType">
- <wsdl:operation name="getNextID">
<wsdl:input message="axis2:getNextIDMessage" wsaw:Action="urn:getNextID" />
<wsdl:output message="axis2:getNextIDResponse" />
<wsdl:fault name="getNextIDFault" message="axis2:getNextIDFault" />
</wsdl:operation>
</wsdl:portType>

Issue with calling external web service with authentication details ...

Hi,
     I am facing a deployment issue with Oracle ESB. I am trying to call an external Web Service with authentication from ESB SOAP Service. It is working fine with my local ESB version 10.1.3.3.0 Build PCBPEL_10.1.3.3.0_GENERIC_070615.0525; however it is getting an error at our development ESB version 10.1.3.3.1 Build PCBPEL_10.1.3.3.1_GENERIC_RELEASE.
     I am getting following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception during SOAP invoke: Server was unable to process request. ---> Object reference not set to an instance of an object.; nested exception is: javax.xml.rpc.soap.SOAPFaultException: Server was unable to process request. ---> Object reference not set to an instance of an object. at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.populateFaultMessage(WSIFOperation_JaxRpc.java:3086) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1728) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1196) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:867) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:770) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:790) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1424) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:307) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispat
     Could one of you please help me out to understand why it is happining.
Thanks in advance.
Jyotirmoy.

Hi Mahesh,
One you are missing is authentication token or credentials.
Please refer to the following articles.
http://www.cleverworkarounds.com/2014/02/05/tips-for-using-spd-workflows-to-talk-to-3rd-party-web-services/
A Series of articles related to Web Service in SPD Workflow
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 1
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 2
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 3
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 4
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 5
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 6
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 7
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 8
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 9
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 10
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 11
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 12
Please don't forget to mark it answered, if your problem resolved or helpful

Calling Reporting Services Web Service with jQuery possible?

Hi,
is it possible to call the Reporting Services Web Service with jQuery? If yes, can someone post me a small example?
Background:
My plan is to create a html with a form which is also uploaded then into the reportserver. I open this html later by clicking a link in a report (with gotoURL open.window). The report opens the html inclusive the overtaken of some additional parameters
(reportname, reportdescription). These parameters I will use in the html-form as defaultvalues for the corresponding input-text-fields. Now the user can make some changes (i.e. the decription). With a click on a button I will send the new description to
the Reporting Services Web Service by using the SetProperties method, closing the html-window and reload the report. Important is that I want to upload the html also into the reportserver itself.
I have already found how to consume a web service via jQuery but with the Reporting Services Web Service I did not get it running in my tests.
I have referenced to the following jQuery.js: http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js
Here you can see my tests I made with the results:
$.ajax({
type: 'POST',
url: 'http://<..>/ReportServer/ReportService2010.asmx/ListChildren',
data: {'ItemPath':'/','Recursive':false},
complete: function(xData, status) {
$('p').html($(xData.responseXML).text()); // result
$("#divStatus").text( status ); // status }
I got a NULL response with Status success. But where are the items?
Another test which should response only one value was that:
$.ajax({
type: "POST",
contentType: "text/xml; charset=utf-8",
url: "http://<..>/ReportServer/ReportService2010.asmx/GetItemType",
data: {"Item":"/Development"}, // Development is a Folder in my Reportserver-Root
dataType: "xml",
success: function (msg) {
$("#divResult").html(msg.responseXML);
error: function (data, status, error) {
$("#divResult").html("WebSerivce unreachable<br> <br>" + data.responseXML + "<br> <br>(" + error + ")");
Here I got an [object Error]
And here my last test:
var soapMessage = '<?xml version="1.0" encoding="utf-8"?>\
<soap:Envelope \
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" \
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema">\
<soap:Body>\
<GetItemType xmlns="http://www.microsoft.com/sql/ReportingServer">\
<ItemPath>/Development</ItemPath>\
</GetItemType>\
</soap:Body>\
</soap:Envelope>';
$.ajax({
type: "POST",
contentType: "text/xml; charset=utf-8",
url: http://<..>/ReportServer/ReportService2010.asmx?wsdl,
data: soapMessage,
dataType: "xml",
success: processSuccess,
error: processError
function processSuccess(data, status, req) {
if (status == "success")
$("#response").text($(req.responseXML).find("Type").text());
function processError(data, status, req) {
alert(req.responseText + " " + status);
Here I got an "Undefined error"
Can anyone help me?
Thanks
René Illner

Hi Rene,
I have one vbscript class to call web services. May be if you need you can use it.
     dim ws
     set ws = new webservice
     ws.url = "http://servername/ReportServer/ReportService2010.asmx"
     ws.method = "MethodName"
     ws.parameters.Add "Parameter1", "Param1 Desc.."
     ws.parameters.Add "Parameter2","[email protected].."
     ws.execute
     set ws = nothing
'------web service calling class
class WebService
public Url
public Method
public Response
public Parameters
public function execute()
    dim xmlhttp
    Set xmlhttp = CreateObject("Microsoft.XMLHTTP")
    xmlhttp.open "POST", Url & "/" & Method, false
    xmlhttp.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
    xmlhttp.send Parameters.toString
    response = xmlhttp.responseText
    set xmlhttp = nothing
end function
Private Sub Class_Initialize()
    Set Parameters = new wsParameters
End Sub
Private Sub Class_Terminate()
    Set Parameters = Nothing
End Sub
End class
class wsParameters
public mCol
public function toString()
    dim nItem
    dim buffer
    buffer = ""
    for nItem = 1 to Count
      buffer = buffer & Item(nItem).toString & "&"
    next
    if right(buffer,1)="&" then
      buffer = left(buffer,len(buffer)-1)
    end if
    toString = buffer
end function
public sub Clear
    set mcol = nothing
    Set mCol = CreateObject("Scripting.Dictionary")
end sub
public sub Add(pKey,pValue)
    dim newParameter
    set newParameter = new wsParameter
    newParameter.Key = pKey
    newParameter.Value = pValue
    mCol.Add mCol.count+1, newParameter
    set newParameter = nothing
end sub
public function Item(nKey)
    set Item=mCol.Item(nKey)
end function
public function ExistsXKey(pKey)
    dim nItem
    for nItem = 1 to mcol.count
      if mCol.Item(nItem).key = pKey then
        ExistsXKeyword = true
        exit for
      end if
    next
end function
public sub Remove(nKey)
    mCol.Remove(nKey)
end sub
public function Count()
    Count=mCol.count
end function
Private Sub Class_Initialize()
    Set mCol = CreateObject("Scripting.Dictionary")
End Sub
Private Sub Class_Terminate()
    Set mCol = Nothing
End Sub
end class
class wsParameter
   public Key
   public Value
   public function toString()
     toString = Key & "=" & Value
   end function
end class
Regards, RSingh

How to create web services with complex objects as parameters

Hi,
Not sure if this is the right place, but...
I'm using Netbeans 5.5 and trying to learn web services.
Creating a simple web service with simple parameters like strings and integers is nice and easy. I'm now trying to take the next step, and create a web service with a more complex schema as a parameter.
I've tried two approaches, and hit dead ends on both:
(1) Define my complex schema as an xsd file, and then create a WSDL file. Creating the schema and saving it in my EFB project works fine; when I try to create a new WSDL file, the IDE gives me a button to import external schemas - which is where the problem is: the Browse simply won't find my newly created schema file.
(2) Define a Java class (in this case, it's a fairly simple example containing a single ArrayList), and then use the IDE to generate a web service from Java. The IDE does this fine, but I now have no idea how to consume or test the web service - I don't know where to look for the WSDL that has presumably been generated, and I'm also a bit iffy over what answers to give the WSDL creator about port names etc.
Ideally, I'd prefer to get approach 1 to work - can someone point me in the direction of a sensible tutorial for these things?
(Happy to carry on using Netbeans 5.5 or to revert to Sun Studio Enterprise, which I was playing with before.)
All help appreciated, Thanks

- For NetBeans related questions, nbusers mailing list is more suited. It is often visited by NetBeans experts.
http://www.netbeans.org/community/lists/top.html
...[email protected]
The NetBeans users mailing list. General discussion of NetBeans use, this is the place to ask for help and to help others.... (There is a 'Subscribe' button next to the above that you can use to subscribe to the list).
Can you try posting this question on nbusers list?
- SJSE 8.1 is based on an older version of NB (NB5.0).
You should definitely continue with NetBeans, since all development is now being done in NetBeans; all the major JSE modules have been moved to opensource at netbeans.org and are all being developed there. There are as yet no future plans to work on further releases for JSE.
Please check out http://www.netbeans.org for more details.

Protecting a REST web service with Policy Agent

I have deployed a REST web service in Glassfish using Jersey Annotations. A UI in the same Glassfish instance is protected by a policy agent that forces users through a login page. I would like to protect the REST web service with BASIC Authentication using the same policy agent. Is this possible? Is there supporting documentation?

Hi Daniel,
When you publish a message through Rest, hope your Restful service will receive/process the posted message?
So
YourBizTalk -->(Post Message to)-->RestFulService
From the error message, "the published message could not be routed because no subscribers were found.", it seems like the this Restful service is a
wrapper (or service interface) for BizTalk at client end( where message has been posted thru Rest) and actual posted message is “processed” by BizTalk and the error "" is from BizTalk "after" Rest. This message says the message you posted
through rest is not found subscription at their end.
So
YourBizTalk -->(Post Message to)-->RestFulService -->Clients'BizTalk.
Here problem is at Clients'BizTalk as shown where the posted message to their BizTalk is not processed because no subscription has been found.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What's up with DreamWeaver CS4?

D/W tells me it can't find the root folder so I go to "mangae sites", then edit, and show it where the site is located on my desktop, and I get this error message.
Then when I try to upload a file to my website I get this error message.
And yes I'd buy CS6 if I could afford it, who wouldn't. But $50 bucks a month is not something I can afford right now.
And it happens over and over again. I won't allow me to fix it. Even after many attempts. Has anybody an answer to this problem. Oh, and I'm using CS4 with Mac OS X version 10.9. I've been using this for years and have never had a problem till I bought a new MacBook Pro.
Thanks for your help, before the fact.

Thanks but I¹ve done that and it just keeps asking me to click on ³manage
site² and do it over and over again. I¹m wondering if perhaps when I bought
this new computer, and the had me change my user name on the computer by
putting a ³1² after it, if somehow that screwed the whole thing up and it
can no longer recognize any of it as a result?
11/21/13, 10:48 PM Ben Pleysier
Re: What's up with DreamWeaver CS4?
created by Ben Pleysier <http://forums.adobe.com/people/Ben+Pleysier> in
Dreamweaver support forum - View the full discussion
<http://forums.adobe.com/message/5864704#5864704>
I think that the error message is quite clear, there is a problem with the
mentioned page. Try renaming the document and see what happens.
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at http://forums.adobe.com/message/5864704#5864704 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: http://forums.adobe.com/message/5864704#5864704 To
unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/5864704#5864704. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver support forum at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerTy
pe=14&container=2240> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Shift+i issue with Dreamweaver CS4

Hi,
i have an issue with Dreamweaver CS4 when I press shift+i the behavior is similar as cmd+v (a paste action). I checked the keyboard shortcut, but no action set for shift+i .. i don't understand.
Please may you help me!?
thanks
bye
Max

Another place you can ask is in the forums for dreamweaver:
http://www.adobe.com/support/forums/

Adding keywords to a web page with Dreamweaver 8

Hi,
Does anyone of you know how to add keywords to a web page
with Dreamweaver 8? I want the link to the web page shows up when
people google the keywords. I pulled out the instructions from
ehow.com and followed the instructions by using the HTML Keywords
function in the Insert menu. I tested it on Google website by
entering the keywords but it did not work.
Any clues would be helpful.
Thanks,
Shirley

Let's put it this way - those sites I have that are highly
ranked do not
have any meta keywords on them. So - you do the math....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Nancy O" <[email protected]> wrote in message
news:[email protected]...
> Maybe...
>
>
http://www.hypergurl.com/articles/metatagswhatare.html
>
> "Will Meta Tags Improve My Rankings?
>
> Unfortunately, the majority of the major search engines
do not recognize
> the
> meta keyword tag at all. A larger number do recognize
the meta description
> tag for the purpose of creating a summary for the page.
The prevailing
> philosophy is that search engines prefer to index text
that is clearly
> VISIBLE to the user, although exceptions are certainly
made. The engines
> in
> general consider invisible text, such as that found in
meta tags, as
> "untrustworthy" since they can be easily abused by an
unethical Webmaster.
> For example, someone could list out many keywords that
do not apply to
> their
> page's content, or they could repeat a keyword many
times in hopes of
> boosting their rankings.
>
> Of the engines that do support meta tags, none are
thought to give extra
> "relevance" to words appearing in meta tags versus
elsewhere on the page.
> In
> fact, most engines give words in these tags less weight
than if they had
> appeared elsewhere on the page such as in the body area
or the page title.
>
> You might then conclude that meta tags are useless?
Well, not quite. You
> definitely want to include a meta description tag on
every page to avoid
> the
> search engine making up its own description from random
excerpts on the
> page.
>
> In regard to the meta keyword tag, many experts believe
that including a
> keyword in BOTH your meta tags and in other areas of
your page CAN help
> improve your rankings. For example, let's say your
keyword was "Star Wars
> collectibles" and it appeared in the body text that is
visible to the
> user.
> If the keyword were also included in your meta keyword
tag, then that
> would
> reinforce to the search engine that "Star Wars
collectibles" was an
> important theme on this page. Although no extra
relevancy boost is given
> for
> including the keyword solely in the meta tag, some
engines may look to the
> meta tag as a way to reinforce their belief that a page
is relevant if all
> the other more important factors "check out" too.
>
> In any case, including the tags are unlikely to hurt
your rankings if you
> follow a few simple rules. Be careful not to repeat the
same keyword more
> than two or three times in the tag. Never repeat the
same word twice in a
> row or you may trigger a search engine's "spam filter."
Lastly, never
> include keywords that do not apply to the content of
that page."
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
>
>
> "John Waller" <[email protected]>
wrote in message
> news:[email protected]...
>> > No one? Several regulars here do.
>>
>> Is there any point in using them other than typing
practice?
>>
>> --
>> Regards
>>
>> John Waller
>>
>>
>
>

How to use web service with ABAP Web Dynpro

Hi.
do you know, how to web service with ABAP Web Dynpro?

Hi,
If you have a webservice ready with you then you can generate a proxy from SE80 and you can use that. You just have to create a port and assign to that generated proxy(CLASS) and you are good to go.
Let me know if you need more information.
Thank You,
Gajendra.

Exploring Web Services with Dreamweaver CS4

Similar Messages

Maybe you are looking for