Export and import of policy

Hello,
I have note this strange behavior when I export, delete and reimport a policy.
In the "Global Settings"-"Storage Device Control" I have enabled and configured some preferred device. When I export and reimport the policy disappear all entry in the "Comment" column of the "Preferred Devices" table and the "Enable Preferred Device List in the Policy" chek box are not checked while before export was checked
I note this behavior in ZESM 3.5 ir8 and ZESM 4.1
Is there a workaround to avoid this issue?
Thanks

mauro,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Export and import of Apps EUL

I have a Apps EUL and use an Apps user id to work in Discoverer Administrator. This is what the Oracle documentation says and it has been working fine.
Now I want to export the EUL but when I start the process I get a message that the user does not have access to all the objects and that only the accessible objects will be exported. Shouldn't the Discoverer Manager/Administrator be able to do a full export?
To get around this problem, I have now been advised to use a database user (the EUL owner) to do the export and import with. Is this the correct way? The Oracle documentation suggest that a database user should never administrate the Apps EUL. Are exporting and importing somehow exluded form this rule?
Thanks!

Hi Aparna!
The Apps EUL was created using a database user. Since then, the EUL has been administered by a Apps user that is dedicated to EUL administration.
The documentation actually recommend that you create the Apps EUL with a database user and from there on administer the Apps EUL with the Apps user SYSADMIN. My company policy doesn't allow me to use SYSADMIN so I have a "custom" Apps user that I use to do all EUL administration. If at all possible, you should try to use SYSADMIN.
The guides and website don't really have a step by step guidance as far as I can remember, more explanatory. I would suggest an email to Michael Armstrong-Smith of the learndiscoverer website. He has helped me alot with this particular subject!

Question regarding export and import of Hyperion Security during upgrade

Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
K

Ihatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

SQL Developer 2.1: Problem exporting and importing unit tests

Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.

Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team

Require help in understanding exporting and importing statistics.

Hi all,
I am bit new to this statistics.
Can anyone please explain me in detail about these commands.
1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE);
2) exec DBMS_STATS.CREATE_STAT_TABLE ( ownname => 'MRP', stattab => 'MRP_ATP_3');
3) exec DBMS_STATS.EXPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP',statid => 'MRP27jan14');
4) exec DBMS_STATS.IMPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP');
I understand that these commands are used to export and import table statistics.
But please anyone help me in understanding this indetail.
Thanks in advance.
Regards,
Shiva.

Shiva,
Please post the details of the application release, database version and OS.
Please see (FAQ: Statistics Gathering Frequently Asked Questions (Doc ID 1501712.1) -- What is the difference between DBMS_STATS and FND_STATS).
For exporting/importing statistics summary of FND_STATS Subprograms can be found in (Doc ID 122371.1)
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Exporting and Importing of Schema

The Export and Import of Schema is not working consistently in SP4.
When I create a new repository from the schema, all the subtables get created. The main table is has only one field in it. It reads Category.
The other fields in the main table are missing and are not imported during the Import Schema operation.
Has anyone encountered the same issue?
If so, please let me know how you overcame this errorneous behaviour?

Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers

Exporting and importing applications/workspaces

I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks

"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Exporting and importing table using R3trans program between 2 clients

Hi,
How to export and import a table between to clients in a same system using R3trans program?
I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure.
Can any one advice
Regards,
Suresh

This is how you do a export and import of table entries.
Export:
Open Notepad and type the following,
export
client = 020
file = 'clone.export.<sid>.<client no>.data'
select * from <client_dependent_tablename1>
select * from <client_dependent_tablename2>
select * from <client_dependent_tablenamen>
Save the file as export.ctl
Run R3trans export.ctl
and the data of these files will be stored in a file called clone.export.<sid>.data in the directory from which you have called R3trans
Import:
Open Notepad,
import
client = 040
file = clone.export.<sid>.<client no>.data
buffersync = yes
Save the file as import.ctl
Run R3trans import.ctl
Cheers!
Bidwan
Message was edited by:
Bidwan Baruah

Exporting and importing just table definitions

Hi,
I have this production database that has a huge amount of data in it. I was asked to set up a test database based on the exact same schema as the live database. When I tried to do an export (from live) and import (to test), with the parameters rows=N and compress=y, the target (test database) data file will still grow enormously, presumably because of the huge number of extents already allocated to the table in the live database. My test database of course, has a limited hard-disk space.
Is there a way to export and import the table definitions without having the target database experiencing a huge growth in the size of the tablespace?
Thanks,
Chris.

If an export with compress=n is still creating initial extents that a too large, you can still build with the import file but it will take a little work.
run imp with indexfile=somefile.sql
when imp is finished, edit somefile.sql by:
1. remove all the REM statements.
2. remove all the storage clauses (tables and indexes)
Make sure your tablespaces have a small (say 1k) default initial extent.
run imp again with rows=n
All your tables and indexes will be created with the default tablespace initial extent.

How to export and import dependent tables from 2 different schema

I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
Looking at this For table mode it says
Also, as in schema exports, cross-schema references are not exported
Not sure what this means.
As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
-Rohit

worked for my 1st time I tried
exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
Current user changed to DBADMIN
. . exporting table TEMP1 10 rows exported
EXP-00091: Exporting questionable statistics.
Current user changed to SCOTT
. . exporting table EMP 14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.

Best way to export and import data from an iPhone app?

How do people here prefer to export and import data from an iPhone app?
For example, suppose your app creates or modifies a plist. It might be nice to provide that plist to the user for separate backup and later allow them to re-import it.
How do people do that? Email the plist to an address? If so, how would one later get it back in?
Is there a common way people do this kind of thing?
Thanks,
doug

Or maybe the best approach for this is some sort of file synchronization feature? Is there a way of having files from the app's filesystem automatically get stored on the computer's filesystem when synchronizing and vice-versa?
doug

Error when exporting and importing TS

Hi I am running SCCM 2012 SP1 and am trying to export a Task Sequence including with the Windows 7 wim, the boot wim, some applications and drivers. When I exported the TS I selected to export dependencies and content.
I have setup dev SCCM environment (same spec as production) and am trying to import the .zip that was created when I completed the export. When doing the import I am getting the below error on both the Windows 7 wim and the boot wim :
Error Imported Operating System Image (1):
Create new Windows 7 Enterprise x64
Generic failure
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM file due
to error 80070003".
ErrorCode= 2147942403;
File="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\
\sspimagepackage.cpp";
Line = 483;
Operation = "Putinstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly. I am wondering if I would be better off using the Migration wizard to take the TS and
content across. Would appreciate any advice on either a) how to fix the issues with the importing of the TS or b) whether I should just be using the migration wizard.
Thanks
G

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Export and import of policy

Similar Messages

Maybe you are looking for