Export client to hard drive to move to a different system

Sorry if this is the wrong forum to post this as I am fairly new to the forums.
We have 2 SAP servers one in the US and one in Germany.
We are getting rid of the SAP server in the us because the lease is due on this server.
We have one client system that I need to export from this US server to send to the folks in Germany to import as a new client.
But I am sort of stuck as this is a totally different SAP server.  I tried to use transaction code SCC8 but it looks like that exports to an existing system within the server?  Is there a way to export a client out to a hard drive so I can then move the files to a dvd and send them via mail to germany?
Does SCC8 only work to export a client on the existing system???

If its done via export then is basically a huge transport... as long as both versions of SAP are the same and patch at the same level you should be ok.
but I am sort of stuck as this is a totally different SAP server.
Can you be more specific?... as I said before they need to be the same version, same patch level.
there a way to export a client out to a hard drive so I can then move the files to a dvd and send them via mail to germany?
Depending on the profile used SCC8 will create 2 or 3 files... I wouldn't use DVD's but you can definitevely store the data in a external drive or backup tapes.
If the systems are different versions and you need to install a new box in germany you will be better off creating a dump using sapinst. If the target OS/DB is different you'll need to follow the heterogenous system copy guide otherwise Homogeneous system copy will do.
Does SCC8 only work to export a client on the existing system???
No, you can use SCC8 to export to other systems
Regards
Juan

Similar Messages

  • I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

    I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

    Many thanks lllaass,
    The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
    Cheers
    http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

  • I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    Not without a player..
    The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
    There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
    A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
    Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
    You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

  • Error message when setting up export preset to hard drive

    laptop is only a few months old LR 5, updated 5.7 recently.  trying to create export preset to hard drive.  First time trying this to send photo for email.  an internal error has occurred Win32 API error2 system can not find file specified when calling shellExecute ExW from Ag workspace.
    What would cause this error and how do I fix it?
    Andrea

    Hello Jen,
    Congratulations on your new MacBook Pro!  I understand how important is to have your email account setup on your new computer. I found a couple of resources that I think might help.
    You can check the Mail Setup Assistant for the server settings for common email providers.  I recommend checking your email settings here first to verify they match what you have in the Mail application:
    Mail Setup Assistant
    https://www.apple.com/support/macosx/mailassistant/
    If the Mail Setup Assistant does not provide settings for your email account, you can use the following article when contacting your email service provider to gather the necessary information to setup your account:
    Configuring Mail for your email account
    http://support.apple.com/kb/HT1277
    If you are able to setup your account but messages are not being downloaded, I recommend reviewing the following article:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

    Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

    Did the back and forth between PC and Mac file systems screw up my files somehow?
    Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
    By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
    Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

  • When I plug in my ipad it automatically tries to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?

    When I plug in my ipad it automatically tires to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?

    You can open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
    To move the current backup folder from C: to D: type in this command and press <Enter>
    Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
    Where <User> is your Windows user name.
    To make iTunes look for the data in the new location type in this command and press <Enter>
    MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
    If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
    tt2

  • HT4848 Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.

    Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.

    They already damaged you Mac by fooling with the BootCamp partition without knowing what they were doing. I wouldn't suggest haveing them help you do anything.
    Here is the article that describes the Recovery HD: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
    First, see if you can boot into the Recovery HD. Restart and hold down cmd-r until you see the gray screen. It should boot into Recovery. If your Mac shipped with Lion or Mountain Lion, it will boot into Internet Recovery if it cannot boot into the Recovery HD on the hard drive.
    They should have tried this at the store.

  • What are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air

    what are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air?

    "Memory" in this case means RAM, the working space for the processor in the iPad. It is different from storage space, the latter being what is referred to by the "32GB", "64GB" etc. specification.
    Regards.
    Message was edited by: varjak paw

  • How do I back up files to external hard drive in order to upgrade operating system?

    How do I back up files to external hard drive in order to upgrade operating system?

    Buy yourself a portable hard drive from WD or the like.  It should have a capacity at least twice that of your machine hard drive.  Then follow the instructions that come with it; it is quite straightforward.
    I have a similar machine to you by the sound of it.   After the initial back up, it is just a matter of topping up every couple of months or so, plus whenever you do to back up any major upgrade.
    A portable one is good because you can store it with relatives when not in use which gives protection in the case of fire or theft.
    I use two backups.   One, an external HD permanently connected for my Time Machine and the second, a portable for the reasons I gave.

  • Bridge: problems with exporting files onto hard drive

    Hi -- I regularly export my files on Bridge to my hard drive and this morning it is not working. It goes so far as to show me the job process box (with the bar that shows the level of completion), but after that nothing happens. The bar is blank and photos are not exported. Anybody have any ideas as to why and how to fix this?

    A lot more DETAILED information will be needed before anyone can help you.
    Bridge doesn't import or "export" anything.  Your files are never "in" Bridge.  Bridge simple reflects the location of the files wherever you put them on your disk(s). When you move them (not "export" them), they're simply moved or copied, depending on their location, to a new location.
    In any event, more info from you is needed.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • While exporting event to hard drive i didn't change kind to original..

    It was set to JPEG -Now all my movies are black--they show the correct length, when you hit play..black..nothing.. i have deleted some and now cant get to go back into iphoto 11 or play.. are they lost forever?  Ideas?

    Ok, sorry - While exporting several events in Iphoto 11 to an external hard drive that had jpeg and .mov files i went to file/export/--on the kind i didn't change from Jpeg to original - so my photos are good on the hard drive , but on the .mov files they show to play and have the correct minutes , but are black and do not show any of the movie.  I have deleted some files in iphoto already, when i try to import them back into iphoto it says unsupported file format.  ---on the .MOV files that are "black" on the hard drive and deleted from my iphoto, are they gone forever?

  • Exporting to external hard drive

    What's the best way to transfer photos from my laptop to an external hard drive for permanent storage using Lightroom?
    Phyllis Bertke

    I Don't know if its the best way, but i have a "My pictures" folder on my external drive thats i added to the Folders in lightroom, within that i have the folder structure containing images.
    So all i have to do to move images accross is drag the folder name ( or selected images) to where i want, and lightroom moves the original RAW files, but they stay visible in the same catalog.
    With 1.1 you can export a as new catlog, i've not tried that as i only want one.
    Mark.

  • Exporting library off hard drive?

    This is my first post here, so please pardon me if this is the wrong place to post this, or the question has already been answered.
    My computer is old and can't handle ITunes, so I'm using my mum's computer. However, I don't want to use up her hard drive by keeping my library of music on it. Is there some way I can either delete music, or export it somewhere else so that her hard drive isn't taken up by it? I tried going to file, library, then export library and putting it onto a cd-rw, but it didn't do anything. Any advice?

    From what I understand in those directions though, that's only to move your music from one location to another that's still on the same hard drive.
    That's not true. See the second paragraph of the summary.
    (39230)

  • Exported Files Locking Hard Drives

    I recently exported several Quicktime files out of FCP using Quicktime Conversion and onto an external hard drive. But when I try to move these files (or any other files on the external drive) off of the hard drive, I can't. I just get the "circle-with-a-line-through-it" logo.
    I unlocked all of the files and granted read and write permissions. And I've tried exporting to multiple drives. All with the same result.
    Anyone else have this problem? Better yet, anyone know the solution?

    Welcome to the forum,
    How are you external HDs formatted? Mac OS Extended (mac) or FAT (pc)?
    Have your run Disk Utillity/Repair Disk on the externals? How are they connected?
    We need more info from you...make/model of computer software/hardware, connections, exact versions of OS/FCP/QT, formats you're working with...etc.
    K

  • How do I replace my old external hard drive with a new larger external hard drive and move my music so itunes can find it?

    How do I move music from an old external hard drive to a new external hard drive and have itunes find it? 

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

Maybe you are looking for