Export file size for youtube

Hi
After reading some of the comments regardind new users I am a little hesitant to pose my question . This is my first post.
Nothing ventured, nothing gained, so here goes.
I have a Panasonic X900 video camera which produces excellent shots at full HD1080i .(PAL AVCHD))
The file coming from the camera is a .M2TS which I gather is a mpeg variation. A typical shot of 3 minutes is over 300meg.
I usually create a sequence from the clip and then edit the clip.
So far so good when I am exporting for use on a DVD.
I have been asked to video someone doing a dance sequence and to place this on YouTube.
(Original file size 300meg)Trying numerous settings, the smallest I can get my output file is using H.264 with a YouTube SD 360 wide screen Preset and this gives me 28meg.
I see numerous .MP4 videos on YouTube of 10 minutes or so and they are still only around 50meg and have reasonable full screen quality.
I have tried importing one of those and creating a sequence from it but they are normally NTSC and 29fps .
On the above basis, if I filmed a 9 minute clip and exported it as H.264 etc it would still be approx 70meg.
I have tried reducing the target bitrate and it certainlyreduces file size but poor quality.
If this is the best that can be achieved, then so be it.
Any suggestions on how to get a reasonable quality result while keeping the file size reasonable would be appreciated.
Regards
Brian

After reading some of the comments regardind new users I am a little hesitant to pose my question . This is my first post.
We wont bite.
Well constructed full questions with detail and hardware / software info will usually get a good response. Screen and frame grabs are helpful.
"Attitude" can sometimes get a bit of a kicking.
Welcome to Forum.

Similar Messages

Reducing file size for YouTube's 2 gig limits

Hello
Using Premiere Pro CS4. I also have the Matrox CompressHD which has its own settings.
I am dealing with YouTube's 2 gig limit and I would like to know which of the settings in the below screen capture I should adjust to help reduce file size.
It's for a Talking Head type video with little action.
Looking forward to your suggestions.
Thanks
...Rowby

Hi All,
Still looking for any good links links that will better explain Gobs, P frames etc, that would be helpful.
Thanks
Rowby

File sizes for youtube/web

I'm a still photographer getting my feet wet in video for the first time.
I use a Nikon D800 producing .mov files, and also a Canon Legria HF G25, producing files with an .MTS extension. Right now I have Canon footage of considerable length, several clips around 35 - 50 minutes, and now my employer wants me to put this up on our website, hosted by Youtube. That's OK, that I think I can manage.
But these files are huge no matter what I try. I go to the Export presets in PP and find the Youtube presets, and pick the smallest one, 845 x 480 pixels. These are mostly talking heads, so quality/resolution doesn't have to be very high. And still a 35 minute sequence weighs in at 2.2 gigabyte. That's a big file by my standards.
So. Is this normal size? Is there any way to compress further that I haven't seen?
BTW I'm using CC2014 full subscription and Premiere Pro is fully updated.

OK, thank you very much.
As long as there's nothing about these numbers that makes your hair stand on end and think there's something horribly wrong here, I'll just go ahead and see how it works out.
Still, if someone has a trick for some extra compression, above and beyond what's considered "normal" (given that quality requirements aren't too high here), I'd like to hear. In still photography we can always crank the jpeg compression another notch if size is an issue. Things like that.

Maximum file size for export into MP4?

Hello,
I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
Thank you
jiri

You are right.
So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
Video is 1920x1080 (AVCHD) 25fps in a .MTS container (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
This is my largest video project (1h 54min) I dont have any other problem with other projects.
I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
Let me know your opinion

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

LARGER Exported File sizes

I recently upgraded to LR V2 (also use PS CS3)
For some reason my exported file sizes have increased immensely
Typically I would convert from RAW to TIFF with the following settings:
11" x 17" print size
compression: none
Adobe RGB1998
16 bit
resolution 300 DPI
These files would convert at about 90MB (manageable on my system)
They are now converting at a whopping 400MB (aging system can't handle this!)
Is this the new LR V2 standard, is there some setting I need to change?
Any help greatly appreciated.
Rich

No, you must be doing something wrong there. 300 ppi (NOT DPI!) at 11x17 and 16 bits uncompressed should be 90MB as you can calculate with simple math. If you enable compression (highly recommended for tiffs - it's lossless compression) you should be able to cut that in half.

I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you

I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you

Yes, you do this when you export the images from the Library.
File -> Export
in the Size section, you don't need images larger than the frame size, so you can specify that and in the Jpeg Quality you can select the amount of compression used.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

SSRS report Excel Export file size is huge

Hello everyone,
I am facing an issue with SSRS report exporting to Excel.
Issue : Exported file size is too big.
I have a matrix report ( parametrized report ) it fetches data from multiple table.
initially when
1) I select all parameters all values
2) load the report after that
3) exporting to excel
so exported file size was about 10 Mb to 12MB
Now, suddenly from this month exported file size is too big around 62 MB for same data,
I checked on different forums and tried the solutions but it didn't worked,
can anyone please suggest me on this.
My environment is
Visual studio (BIDS) 2008
SQL Server 2008 R2
Excel 2007
Thanks

Hi UdayKGR,
According to your description, when you export a report into an excel file, the exported file size is too huge. Now you want to reduce the file size. Right?
In this scenario, do you export the report into excel 2003 file? When reports are first exported and saved to Excel 2003, they do not benefit from the file optimization that Excel automatically applies to its *.xls workbook files. The larger file size can
cause problems for e-mail subscriptions and attachments. To reduce the size of the *.xls files for exported reports, open the *.xls files and then resave the workbooks. Resaving the workbooks typically reduces their file sizes by 40 to 50 percent. Also please
try to install the Reporting Services 2008 R2 Service Pack 2 and reduce the merged columns in exported excel file. For more information, please see the links below:
Exporting to Microsoft Excel (Report Builder and SSRS)
problem
regarding the size of exported report from reporting services to excel format
SSRS Export to Excel - Performance
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each like in version 10.6

I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each, like in version 10.6. It used to show the size at the bottom of the "window" for the selected folder,drive etc.

What is an idea of maximum file size for a film in Captivate?

Hi there,
I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
Thanks in advance

Probably better guidelines that dictates 'size' of a vi are:
typically no more than 1 video screen in size
is it legible
and is it's function and operation clear.
I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

How do I find a file size for a project in its entirety ???, How do I find a file size for a project in its entirety ???

How do I find a file size for a aperture project in its entirety ????

You can't. The Aperture library is a combination of database and flat files, a project can be split among multiple files in combination with other projects. The size of any of those files (or a sum of the files) would have no meaning concerning the size of a project.
BTW typing in a large bold font like you did is seen by many in then on-line community as a sign of shouting and is considered bad form. I'm sure you didn't mean to shout at us here as we are all just users here freely giving of our time to try and help folk like yourself so please in the future use the standard font.
regards

Maximum file size for importing into Premiere Pro CS6

Hi,
I'm considering recording raw video, no compression at 720p, 30 fps for 20-30 min. This woudl result in a file that is close to 80 Gbytes. I'm wondering what the maximum file size for importing into premiere Pro is and if I need to split this file up into smaller pieces. Any recommendations on how I may deal with uncompressed raw video that is pretty long in length?
Thanks,
Serena

There is bound to be some limit somewhere in the program, but you should be well below that. The biggest issue might be whether your computer is up to the task of handling it. If you will post your computer specs., someone will give you comments on that aspect.
Good luck,
Hunt

Please can you tell me the default maximum file size for an attachment in Case Management v12 ?

Hi,
Please can you tell me the default maximum file size for an attachment in Case Management v12+? I am able to define a maximum attachment size but I am not able to see what the default is set to.
Thank you
Regards,
Anthony

Hi,
The default max attachment size is 8MB.
Regards.
Mike

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

Can i have a smaller file size for songs that i put on iphone vs mac

i have ripped a lot of my cds to itunes on my MBA. i used the aac high quality setting.
is there a way that i can upload lower quality/smaller size versions of the songs that i will put on my new iphone ?
Q2: once i rip cd into itunes (on my MBA)... is there an easy way I can later decide to save space and re encode them at 128 instead of 256 (for example).
i notice that you cant just willy nilly copy/delete from the itunes media folder because itunes doesnt seem to 'refresh' with the new files.
thx!

1. the ONLY place i see where you can set the sampling rate,etc is under preferences/general/'when a cd is inserted".... am i missing something?
No.
2. when i want to add an existing mp3 file (from outside the apple realm) , i am using itunes "add to library" and browsing to some mp3 file(s) . it doesnt give me a option to convert it to an m4a format... it seems to just add it to the itunes library without changing the mp3 file .... do i have any option here?
You don't need to convert formats and I would not recommend you do so. You will simply lose quality.
To answer your original question...
can i have a smaller file size for songs that i put on iphone vs mac
If you want smaller files on the iPhone, see my post above which converts them when syncing to theiPhone.
If you really want to convert when adding songs to iTunes...
iTunes prefs > General - Import settings as you want.
Hold Option (Mac) or Shift (Windows) and choose File > Create New Version > Convert AAC (or what your settings are in previous step).
This will convert and add the file instead of adding the file then converting and having 2 of the same song in iTunes.

Export file size for youtube

Similar Messages

Maybe you are looking for