Export image EMF from tab control, help!!

Hello,
I am trying to get a good resolution report. I got use export image to EMF file so the graphs look very good resolution. When I appended the image control like png it looked poor quality. Now is ok, now I export image of graphs to emf and then use 'append image to report' using the path of file emf.
But I have a problem in this case. I am trying to get EMF file from Tab control. I have 8 graphs inside of each page of tab control. I would like to get each page exporting to EMF file and later append the image to report from path of file. The problem is I cant export to emf. I tried the solution in this treads.
http://forums.ni.com/t5/LabVIEW/send-control-image-programmatically-to-clipboard/td-p/180921/page/2
But it uses get image and it is bmp, so no good solution.
I attached pdf file. IT shows the tab control with append control to report (it is like capture in png file) and one graph append control to report png and emf file of another graph and use the path to input in word report. You can see the diference.
I would like to know if i could export the tab control to emf or any onther vectorial image and later use the path. SInce it will take several pages and i will need sometimes 300-400 graphs...
Any idea would be great.
Best Regards.
Attachments:
z-capture.png ‏34 KB
Report22.pdf ‏212 KB

Hi Mike,
Thanks for your reply!.
Well, it was only one example. Check the attached file. It works ok. I split in dataset of 8sec and save the emf files.
The problem is the report. If I enable it doestnt works fine, since you will be the both parts working in the same time.
That's why the sequence structure would be ok, one time all the graphs are saved then I could append to report.
I have another question. I used transparent graph and it works ok. I remove all the scales Y values or labels and customized the graph adding one horinzontal line for X scale (like capture), but in the file emf saved didnt appear. Do you know why?.
Best Regards, Fred.
Attachments:
z-capture1.png ‏31 KB
z-capture2.png ‏16 KB
Report1.pdf ‏267 KB

Similar Messages

Assertion failed! while exporting my pics from lightroom5 plz help?

assertion failed! while exporting my pics from lightroom5 plz help?

If exporting via "hard drive" service, check post-processing in bottom section of export dialog box, and set it to something other than "blank".

View Aquired Image in a Tab control

In order to conserve space I would like to view a live image, aquired from a 1409 board,in a page of a tab control. Also to decrease cpu usage I have set up a Low Level ring. I have tried sending the image to a picture control, but the image is choppy (even if I slow down the loop). My image is perfect in a Vision Window, but this cannot be used as a control on a page. Any suggestions?

Terry,
Bruce has the right idea, try making a child panel and use WindShow to hide or show the display....Attached is an example I wrote using multiple boards and displaying two images on the pages of a tab control...I hope this helps.
Best Regards,
Chris D
NI Applications Engineer
Attachments:
IMAQ_Grab_in_Tab_Control_2.vi ‏126 KB

Export image sequence from AS flash file

Hello:
I am new to flash I am using flash professional 8 and
publishing at version 6 (although I can publish to any version for
this issue). I am using ActionScript 2.0 and am animating objects
using code instead of tweens. I need to export the animation out as
separate frames. I need the image sequence from the flash to use in
other applications and other uses. If anyone has any idea on how to
do this I'd appreciate knowing. I'd prefer to not have to buy more
software of course but if that is the case and it is the best way
let me know.
Thanks in advance.

The latest Flash CC 2014 release has an export to SVG option, which exports the current frame as SVG. There is no direct way to export the entire animation as SVG sequence though.
You can find more details @ Flash Professional Help | New features summary
-Dharmendra

Can't export image files from flash

In Flash 13.1.0.226 it seems like the options to export a layered image are gone. When I go to export>image there is no longer an option for .fxg
I've read through this forum and Adobe recommends export .svg. There is absolutely no option to export or save as .svg
The only export options I see are jpg and png, which is useless to me. Please tell me how to export a layered image from Flash.

Hi ,
Flash Pro CC 2014 (v 14.0.0.110) is now available for download via the Creative Cloud App.
We have included export to svg format along with several other new features with last release of Flash Pro. You find this option in Flash Pro CC.If you are subscribed to CC you can download the latest version of Flash Pro which has several more new features in addition to SVG export from the creative cloud App.
Complete list of New features in Flash Pro CC 2014 is available at these links:
Overview:         https://www.adobe.com/in/products/flash.html
Whats new:      https://helpx.adobe.com/flash/using/whats-new.html
Release Notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html
Videos:           https://helpx.adobe.com/in/flash.html
Thanks,
Sangeeta

How can I export image column from SQL Server 2000

Hi everybody,could someone tell me how can I export an entire column( pictures type) to a folder on disk?I've tried the textcopy.exe under the SQL installation's binn folder,it can only export one picture a time,I'm trying to find an automated way to export
the whole colum's images to a folder,I'm using SQL Server 2000.

Vishal,thanks for the replay,I've tried the BCP method but it seems does not work on my Sql Server 2000,also the SSIS package method is demonstrated with Sql Server 2008 R2 and my machine does not have the visual application to try it.In the BCP method,I
got prompt indicating me that I wrote something wrong in the grammer,and I'm pretty sure that maybe I made something wrong in the below part,the grammer makes me confused
INSERT
INTO @sqlStatements
SELECT 'BCP "SELECT Photograph_Data FROM [ALBSCH_Trial].[dbo].[Photograph] WHERE Photograph_ID = '''
+ CAST(Photograph_ID AS VARCHAR(500)) + '''" queryout ' + @OutputFilePath
+ CAST(Photograph_ID AS VARCHAR(500)) + '.jpg -S localhost\SQLEXPRESS2008 -T -f C:\SQLTest\Images.fmt'
FROM dbo.Photograph

How to save values of a page from tab control??

Good morning!
I have a question about saving the data of one page of the tab control.
In my case, alarms (boolean buttons) can be activated, it will appear in a page called HISTORICO (Date // Time // Room), but when I change to another page and back again to the HISTORICO page, the table back for null value.
Here's some screenshots of my program.
If anyone can help, I will be grateful.
Solved!
Go to Solution.
Attachments:
mainvi.png ‏167 KB
frontpanel.png ‏141 KB

In your case structure set on the case "Tabela", you have a Use default if Unwired tunnel on the right hand side. And I can see that you have some unwired tunnels on it. If the case structure ever executes one of those cases, then the default value of an empty table is going to be passed out and put in the shift register.
Solution:
1. Right click on that tunnel and turn off Use Default if Unwired. (In 95% of tunnels, it should not be used.)
2. Find the cases where the tunnel is unwired and pass the table wire through all of them.

Export image sequence from Flash

Hello,
I made an short animation in flash (Only about 3 seconds) and I am wondering if there is a way to export the animation as an image sequece. I could've sworn I've done it before but I can't find any information on how to do it. If anyone can give me information on if this is possible and if so how to do it I'de appreciate it. I am using Flash CS3, and I just need to get the animation exported as individual images.

yeah i get the idea of guide layers and how useful they are. just dont want all my rough layers visible when i export an image from flash.. my point being you never had to hide guide layers before publishing on old versions of flash which i think makes more sense.. why would you ever want to see a guide layer on a published image?? anyway, i discovered this only happens when using actionscript 3.0 but not 2.0 so, ive gone back to 2.0

Photoshop adds one pixel to images imported from illustrator. Help!

Whenever I import an image from Illustrator (CC) into Photoshop (CC), it seems that Photoshop is adding ONE PIXEL to the image. For example, if the image is designed at 250x300px in Illustrator, when I bring it into Photoshop, it becomes 250x301px. Since I'm designing for specific web ad dimensions, this is obviously a problem.
Why is this happening, what might I be doing wrong, and how can I correct this? I appreciate any suggestions/feedback! Thank you!

Whenever I import an image from Illustrator (CC) into Photoshop (CC), it seems that Photoshop is adding ONE PIXEL to the image. For example, if the image is designed at 250x300px in Illustrator, when I bring it into Photoshop, it becomes 250x301px. Since I'm designing for specific web ad dimensions, this is obviously a problem.
Why is this happening, what might I be doing wrong, and how can I correct this? I appreciate any suggestions/feedback! Thank you!

Programatically Change Tab Control Image

Is it possible to change the tab image of a
tab control using program calls? I can add an image to a tab by
right clicking the tab, then selecting Advanced --> Tab Layout
--> Import Image From Clipboard. This works well when editing
the VI, but I would like to change the image while the VI is
running. Any help?
I have found no resources online, or by looking at the property node or invoke node for the tab control.

Not possible. The image can only be set while in edit mode.

Background image tab control

i use labview 8.20
is it possible to add a background image to a tab control ?
i only see, that i can change the color. or change the background image from the complete background.
but i dont't want to make my tab control transparent, because then i can't see the registers (tabs with the text) of the tab control.
is there a solution ?

I do not believe that you can do it directly. You could add a picture control to each tab and place it behind the controls and indactors to achieve the same effect.
Tim
Johnson Controls
Holland Michigan

Better control of the placement of the copyright notice in exported image

When exporting from Lightroom and enabling the copyright overlay, the placement of the copyright notice depends on the original orientation of the camera, making it possible to end up in the top right of the image. I would like it to always end up in the same corner of the actual exported image. Also, some control over the font and color would be nice!

Is sort of annoying. Not sure if it can be changed. I known when I download movies and put them in iTunes it tries to sync and I wait for it to try and I click the little X in the status window to stop it. Reason being, I want to first add the Artwork and set some other tags. Then I go hit the manual sync button.
I agree it is a bit of a pain.

Customizing Tab control and Enum

I am trying to do two things here regarding customizing controls.
The first is to add a down-arrow decoration to an enum so that it looks kind of like a menu ring (click the down arrow to drop down the selections). If I simply paste it on top of the control, the decoration will intercept the click and not drop the selections down. I want to have the control colored, so putting it behind and making the ring text background transparent doesn't really work either. If I make it part of the "Ring Text" background element, it's fine for that one size, but if I resize the control it gets all stretched out.
The second is to modify the "Page Labels Display" in a tab control. The only selection allowed when attempting to customize the tab control is to "replace" the page labels display with a different control type. Every enum or ring that I've tried has simply beeped at me with no replacement. I would really like to get the aforementioned Ring-styled enum in this box as well.
One other quirk that I haven't noticed before (Maybe since I haven't done a lot of work with tabs in the past), but when I'm trying to get context help for anything inside of a tab, the only thing that shows up is the context help for the tab itself. Is that "working as expected"?
Regards,
Mike

hi Mike,
there is another discussion forum covering your first question, but it sounds like your best bet would be a ComboBox:
This will give you the appearance you want, and behaves the same as an Enum.
In order to set up a similar drop down menu of the pages of a Tab Control, it will be a little more indirect. Take a look at the attached example, which populates a combo box with the pages of a Tab Control.
That quirk you mentioned with the Context Help and Tab Controls is a known bug, and is fixed in LabVIEW 2011. Hope this helps!
~kgarrett
Applications Engineer
National Instruments
Attachments:
ex get pages from tab control.vi ‏10 KB

Save the selected value from listbox with its respective tab control dropdown selcted values in another listbox

Hi all,
I am making a vi where I have to save the selected value from listbox with its respective tab control dropdown selcted values in another listbox.Whenever I select Item1 then the heading change and respective tab will open for that item.But Now I just want to save the selection and put it in another ListBox.SO that I can renmove or add according to my wish. Plz help me.
Solved!
Go to Solution.
Attachments:
my_vi.png ‏83 KB

Hi, I successfully make the vi to insert itmes from listbox1 to listbox2.Whenever I select itmes 1 in listbox 1 it display same elected item in listbox2 , but it not appending the items in listbox2.Like If 1 is selected in listbox1 then 1 will display , next time after saving when I selct next item like 3 then in listbox 2, 1 is replaced by 3,it dont come in second row of listbox2.Hope I am able to explain.\
Plz help me to resolve this.
Attachments:
listbox_update.vi ‏11 KB

Images imported from QT exported image sequence have jagged edges

Hi
I've come across something strange which I'd like to resolve.
I export an image sequence from QuickTime.
I then import this into Aperture.
But the images imported into Aperture now have jagged edges where there has been any movement in the original footage.
The images originally exported from QuickTime look absolutely fine when viewed with preview, they have the expected blurring on moving objects, but no jaggedness.
Now, a bit more detail.
The footage I'm exporting from was shot by me and came from a Final Cut Pro edit.
The codec in the QT movie is Apple Intermediate Codec and this is interlaced.
The jagged edges on movement look to me like the problem of interlaced not being converted to progressive.
However the exported images from QuickTime don't display this when viewed in Preview, it is only when viewed in Aperture that the jagged edges become apparent.
I have tried exporting from QuickTime to jpg, png and psd, but the problem is identical no matter which format I use.
I really want to now use Aperture to improve these exported images, but with this jagged edge problem I can't.

Hi JNorris--
Sounds like you need to apply the deinterlace filter (Effects tab: video filters: video: deinterlace) to the stills your exporting.
See if that makes a difference to start.
T.

Export image EMF from tab control, help!!

Similar Messages

Maybe you are looking for