Export in the highest quality

I have made a very complex presentation in Keynote with all kinds of shadows, exact positionings of images, backgrounds, reflections etc. I have noticed that if I export from within Keynote to Powerpoint in order to share this presentation it looks like crap. Images fall off, shadows dissapear etc.
In order to share this presentation in the highest quality I would like to do this in Pdf format and then create a fullscreen version in Acrobat pro. Any other suggestions when the highest quality of the slides are indispensable? I would like to give the viewer the same booth like experience as Keynote at the best quality.
Thanks

Fernando-
I'm currently, desperately trying to get my polished Keynote presentation exported as a QuickTime movie, and although the process completes and is successful the sound on the first 2 slides of my slideshow will not play in QuickTime. As a test I moved the first 2 slides to the back and sure enough, the same problem still exists (meaning it wasn't just the audio in those first 2 slides).
Any ideas?
Thanks in advance,
Rich

Similar Messages

  • I have a 5minute video in iMovie'11. I need to export in the highest quality for projection in a cinema theatre. Please advise as to best setting to accomplish this.

    I have a 5minute video in iMovie'11.
    I need to export in the highest quality for projection in a cinema theatre.
    Please advise as to best setting to accomplish this.

    If it looks good on your tv it will look good at the cinema.
    The resolution will still be 720x480/576 if a dvd player is hooked up to the projector.

  • Is "export frame" the highest quality?

    Hi.  Sometimes I want to have a video clip freeze.  That is to say, the final product will have two or more frames that are identical, taken from a single frame of a movie clip.
    The way I've been doing this is using the Source or Program monitor to find the relevant frame, export it, and re-import it as a still.  Yet, it occurs to me that when watching videos in the Source or Program monitors, I am not watching the video at its highest quality.  When I finally render my product, I will render it at highest quality.  Does this cause a mis-match between the exported frame and my final product?
    When I "export frame", does Premiere take the time to render that frame at best possible quality?  Or am I just getting a preview-quality frame?
    Richard

    The exported/frame grabbed frame will be full quality. The lowered quality is for preview purposes only from within Premiere itself.  As long as you don't select .jpeg and stick with a lossless image format when you do a frame grab from within Premiere it will be full quality.

  • HELP! What are the settings to export with the highest quality (I will show my project in a cinema.)

    Hello,
    I have a project I will be showing at a local cinema, and I need to have the best possible quality for that......
    My source footage is SD, so I am exporting it as a MPEG2-DVD project, the first time I exported (with the default MPEG2-DVD settings) and burned it, it looked good (at least on my 34" TV) but I am not sure if that quality will be as good when projected on a cinema screen...
    So, what I need to know is, which of the MPEG2-DVD export settings I must change in order to get the quality I am looking for.....
    BTW I am using Adobe Premiere CS4 and the whole Creative Suite 4....
    Thanks in advance
    Al

    If it looks good on your tv it will look good at the cinema.
    The resolution will still be 720x480/576 if a dvd player is hooked up to the projector.

  • When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
    Does it play in your Mac?
    What brand of disks are you using?
    Russ

  • Why does the highest quality ('Display') resolution vary from exporting one slideshow to the next?

    When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

    When exporting a slideshow from iPhoto I'm selecting the highest quality (Display). I noticed that resolution setting (Display) varies depending on which slide show I want to export (i.e. 1000 x 800, or 1420 x 800). Why?

  • Is microsoft avi the highest quality format to export an avi file in premiere pro cs4?

    Hello,
    I exported an avi file in premiere pro cs4 in media encoder using Microsoft avi format but the quality turned out poor on dvd, what's the highest quality format I can use?
    Please help
    Thanks
    Elio

    Elio,
    As has been stated, DV-AVI is not the format FOR a DVD-Video. However, it can be used (and often is) as a transport medium into a DVD authoring program, like Encore.
    Can you please outline your workflow from PrPro to the final DVD, and is it a DVD-Video (will contain MPEG-2 material in VOB "containers"), or a DVD-Data, that is then played on a computer with something like Windows Media Player, VLC, MediaPlayer Classic HC, etc.?
    Good luck, and please let us know exactly what you are doing, and the programs used.
    Hunt

  • Does exporting "current" provide highest quality/size jpegs?

    What are the default settings of the "current" option in exporting photos from iPhoto? Is it the same as choosing jpeg at highest possible quality, best resolution, etc.? I would like to export my photos in iPhoto to an external drive and would like to preserve the highest quality jpeg size/format as originally imported into iPhoto from my camera. I understand that exporting as "original" would do this. However, I have created duplicates of photos and cropped them, and would like to preserve the cropping upon export. Exporting these cropped photos as "original" removes the cropping. Does exporting as "current" export the fullest size and highest quality jpeg possible (for the smaller/cropped image)?
    Thanks for advance for any clarification on this.

    Export a JPEG and set the quality setting to the highest value
    LN

  • How do I create the highest quality dvd of an iphoto slideshow?

    I have created a large (550 photos) slideshow in iphoto using one of the iphoto templates and added music to the slideshow.  The photos are high quality/large file size photos.  I would like to then combine the iphoto slideshow with an imovie trailer.  When I have gone through through the process of exporting the slideshow out of iphoto and into imovie and then burning a disk with idvd, the quality of the dvd is poor.  I am using the latest versions of iphoto, imovie, and idvd.  I would appreciate any advice on how to produce the highest quality dvd from the slideshow as it is part of a gift recapping a trip.

    Here's one approach: First crop the photos to the iDVD size ratio, 4:3.  Export the movie out of iPhoto via the Export button and select Size = Medium or Large.  Remember DVD video format is standard definition only.  All media gets reduced to 640 x 480 before burning to disk.
    Don't add it to iMovie as that just adds another layer of compresson/encoding to it.
    In iMovie create the trailer and use the Share ➙ Media Browser option.  This produces a better file image than the Share ➙ iDVD option.
    In iDVD create a Slideshow and add the trailer from the Media/Movies pane and drag the iPhoto movie after it.
    Set transitions to None and slide duration to anything but Manual.  Do not add any audio.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If you find that the resulting movie/slideshow extends off the TV screen and looses some of the image you can set the iDVD/Slideshow preferences to Scale Photos to TV Safe Area. 
    That may add black areas to each side of the movie depending on the size ratio of the TV screen and aspect ratio set in the DVD player.
    NOTE: if you have access to a copy of iMovie 6 HD I suggest you use it for your slideshow from photos and the trailer.  It produces the best results with iDVD and allows far better audio control.  If you do have that version just drag the completed iMovie project file into iDVD to avoid another layer of encoding/compression.
    OT

  • I am shooting aerial video with a GoPro H3  at 1080p 30fps and would like to edit videos and give them to my clients to use in as much media as possible for their advertising and marketing needs.  I would like to give it to them at the highest quality all

    I am shooting aerial video with a GoPro H3+ at 1080p 30fps and would like to edit videos and give them to my clients to use in as much media as possible for their advertising and marketing needs.  I would like to give it to them at the highest quality allowed.  What form should I save it in 'Publish and Share'?  I have Premier Elements 12.

    KM
    Can we assume that your 1080p30 is an AVCHD.mp4 file or other?
    You manually or the project automatically should set the project preset to
    NTSC
    DSLR
    1080p
    DSLR 1080p30 @29.97
    (If your frame rate is really 30 instead of 29.97, then go with DSLR 1080p30 instead of DLSR 1080p30 @29.97)
    See the following link for setting the project preset manually
    http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
    For your export
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 - H.264 1920 x 1080p30
    Please let us know if you have further questions on this or need clarification on anything written.
    Thank you.
    ATR

  • Burning the highest quality in idvd 9

    Hi,
    When burning a disk at the highest quality available in idvd 9, what is the final output resolution? I'd like to get as close to 1080i as possible (knowing that I cannot burn HD without a HD burner and equivalent software). I am curious as to what idvd does to your video and stills. I've been creating HD movies in FCE (1280x720) and using idvd to create slideshows and then burning the project to dvd for playback on my HDTV. My images are HD 1280x720 tifs which I have been importing into idvd for a slideshow. On the final output I notice the images look soft, so was wondering what quality idvd is capable of.

    As stated above already iDvd is limited to standard definition. There are no workarounds that I am aware of within iDvd itself. You'll have to think outside of this app if your intention is to go high def and blu-ray or even high def on a standard dvd-r. Forget about playing it back on most macs since apple doesn't currently support Blu-ray playback through its own dvd player app. Your hands are tied unless you choose a third party or an alternate dvd player application to open the file. For example, Roxio's Toast Video Player can do this.
    click here
    Hope this helps but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

  • Which DVD to iPod Method (for windows) has the highest quality?

    Hi everyone! This is the first thread I have started! *pats himself on back*...
    ...O.K. down to buisness...
    Does anyone know or tested which dvd to ipod conversion method is best? I have looked at most of the threads here about the conversion methods, and I was wondering which had the highest quality picture, quickest conversion time, and taks up the least memory. Feel free to post your opinions, but I feel tested responces are more helpful. Thx for your time...

    'dvd decrypter' is phenominal. all it essentially does is takes the '.vob. file off the dvd. it takes up alot of space, but the quality is perfect. somewhere on videora.com there is a link... its free too. as for a converter, ive tryed most of them, and totally preferred videora, onyl because it converts any type of file.

  • Printing to DVD at the highest quality possible

    Hello out there. I have a question. I'm currently editing a project that was shot on 35mm film telecined full frame (4:3) to DigiBeta and down converted to DVCAM. Durning post we added a 1.85 matte (as he footage was originally composed for 1.85). My main concern is to output this footage at the highest quality possible. (Is FCP's Compression a good tool for this) Also I was wondering if anyone had a link to a discussion where I could find out how to burn a dvd with no menu that continuously loops. I'm currently using the FCP Production Suite with DVD S Studio Pro 4. Thanks
    Erv

    If you do a search you can find discussions on both of these topics as they have been discussed over and over, especially the compression one.
    this is a good read:
    http://www.kenstone.net/fcphomepage/first_playwarmouth.html

  • I have just finished editing a feature length documentary for theatrical  release. How should I output it for the highest quality finished product?

    I have just finished editing a feature length documentary for theatrical  release. How should I output it for the highest quality finished product?

    You may find this article. interesting.
    Good luck,
    Russ

  • How can i tell if the macbook pro is of the Highest quality?

    This kinda has me worried about where to how to purchase my new macbook.
    My simple question is how can i tell if the macbook pro i intend to buy is of the Highest quality? Its easy with phones thanks to IMEI numbers. I doubt an equivalent for notebooks exist, but hey! apple's always got that magic hat and always capable of a supprise. So here i am folks, supprise me.
    <Edited By Host>

    Buy what you like and get the Apple Care Option which covers defects of manufacture for 3 years and extra support..
    http://www.apple.com/support/products/

Maybe you are looking for

  • 24" iMac having startup issues

    I thought I would post here in an effort to try and see if there is anything else I can do before heading to an Apple Store tomorrow. I own a 24" iMac, which I got in the fall 2006. A few weeks ago, this problem first occurred. The computer started u

  • 0x80070035 Across WAN between Windows 2012/8 Computers

    Head scratcher on this one. Network Shares/Servers running Windows 2012 are unaccessible across the WAN but only When it is a Windows 2012 or 8 client. Here is a basic view of what is happening; If User in NoCal tried to access information from a Win

  • Definer rights vs. user rights

    I must be having a senior moment .... ;-) Trying to demo definer rights vs. user rights on execution of a procedure.. With apologies to Daniel, I created this test, and then in trying to find the answer to my question I found his nearly identical exa

  • Adding my-streaming-amf : Getting Error

    I am following the http://www.adobe.com/devnet/livecycle/articles/blazeds_gettingstarted.html tutorial and when I go and run the app I get the following error: [MessagingError message='Destination 'project' either does not exist or the destination ha

  • How do I retrieve a lost Volume limit Unlock Code?

    I have an MA002LL model 27.8 GB iPod that I set the Volume limit on and didn't write down the lock code. Now I want to change the volume limit; how can I retrieve a forgotten lock code?