Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Similar Messages

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

HT204053 Can multiple people use the same Apple ID for their own devices?

Can multiple people use the same Apple ID for their own devices? I just set up my IPhone 4S (first time user) using the same Apple ID as my daughters and now we receive each others texts, do I need to set up my own Apple ID account?

Yes, you can. In fact it's recommended that you use different IDs for iMessage, FaceTime and iCloud. You can still share the same ID for iTunes without any issues.
You are getting each other's text messages because you're using the same ID for iMessage. To fix this, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with a different ID. To avoid getting each other's FaceTime calls, do the same thing in Settings>FaceTime.

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Add multiple scans to the same pdf file scan at time of scanning

Hello, HP Officejet Pro 6830 How do I get it to add multiple scans to the same pdf file? I need to scan multiple documents and have them all end up in one pdf. Some may be double-sided and it is fine if I have to scan them individually. At present it will only do one scan or a double-sided scan then it wants to save the scan and not ask if there are any more pages. The only option is to save or not. Thank you.

After your first scan you need to click the + sign at the 7 o'clock position.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Multiple classes in the same source file

I'm not sure what this is called, having multiple classes in the same source file. At first I thought it ws called subclassing but then I googled it and found that subclasses are just derived classes. Here's an example of what I'm talking about.
public class A {
class B {
class C {
}So first of all, what is having multiple classes in the same source file called?
Secondly, what are the advantages/disadvantages of this?
Thirdly, can you have a class completely WITHIN a class (same source file but inside the class not outside) and what are the advantages/disadvantages of this?

Advantage: You can reduce the number of source files specialy when your secondry classes are used only in the public class of the file.
Disadvantage: Normaly it make things more clear if we have one-to-one correspondance of class and source files. This make things easy when you want to find the java file of a perticuler class file. Also If you later wanted to create a seperate public class with a same name as one of those secondry classes you got lots of changes to do.
You can avoid this by creating them as nested classes
ex:-
public class MyPublicClass{
private static class MyInnerClass{
}this way the inner class will create a class file with name "MyPublicClass$MyInnerClass.class" instead of just "MyInnerClass.class"
And also if you declare the inner class as public you can access them from out side

Scan multiple pages to the same computer file

How can I scan multiple pages to the same computer file on my HP Officejet Pro 8600 Plus? Currently it will only scan each page to a separate computer file. I scan one document and then when it asks if I want scan another page I say yes and scan it. However they still go to separate computer files.
Thanks!
This question was solved.
View Solution.

Thanks so much!

Setting up a shared library for multiple accounts on the same machine

I am in idiot. I can't figure it out. This is exactly what I did.
1 - I set up multiple accounts on the computer. 1 for me and another for my wife.
2 - I loaded all the music into my account's public folder.
3 - I set the default folder in both hers and mine iTunes for this Public folder
4 - I then opened iTunes in my account and none of the songs were showing up so I dragged the folder into iTunes and it did its business. Now my account is all set.
Here are my questions:
A - Do I need to drag the folder into my wife's account iTunes as well?
B - If either of us add music when logged in, will it automatically update in the other iTunes interface or is there something specific that needs to (manually) be done?

Doing it the way you did, you each have your own iTunes library file and are using the same iTunes music folder.
Changes by one will not be seen by the other and any new music added by one will have to be added to the library by the other.
Also, if one deletes music, it will be in teh library for the other but it will not be playable because the other person deleted it in the iTunes music folder.
Launch iTunes, then immediately press and hold Option, then select *Create new library*.
Create one in Users/Shared.
Quit iTunes.
Move all your music into the new /Users/Shared/iTunes/iTunes music folder.
Login to your Wife's computer account.
Move all her music into the new /Users/Shared/iTunes/iTunes music folder.
On her account, launch iTunes, then immediately press and hold Option, then select *Choose existing library*.
Select the _iTunes library file_ in /Users/Shared/iTunes.
In iTunes, File -> Add to library and select the iTunes music folder in /Users/Shared/iTunes.
All the music will be there.
Quit iTunes and log out of her account and back into your account and launch iTunes normally.
All music will be there.
You should go to /Users/Shared/iTunes folder and right click - get info, click *Ownership & Permissions*. Set *You can* to *Read & Write* and set Others to *Read & Write*.
Click *Apply to enclosed items*.
Any changes (new/deleted music, ratings, playlists, etc.) by one will be seen by the other sionce you are using the same iTunes library file.
Only one person can have iTunes open at a time. If you use Fast User switching, one will need to quit iTunes before the other can use it.

Find my Friends : Support for multiple users under the same Apple ID?

Can multiple users under the same Apple ID use the app to find each other? My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time. If that is the case then it is a major disadvantage and I will need to go back to using latitude (or Find My iPhone which also allows me to see where all of my devices are at the same time)

http://isource.com/2011/10/16/how-do-you-set-up-icloud-for-a-family/
This worked for me.

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

Multiple instances of the same BSP app for the same user

Hi,
I currently have a BSP application which has a main page which consists of three frames. Each of the frames within the page is linked to its own controller, with one other controller controlling the whole page.
due to the nature of the program i need to access information from one controller in another. To do this I create a reference to the controller whose data I want within the controller that needs access to it. This works fine under normal processing, however when the application is executed / called up twice by the same user, the controllers for the initial instance of the application are de-referenced...
Does anybody know why this may be occurring...and how to get around it?
Thanks
Mike Law.

Whenever you open a browser anew, then there is no session data that the browser can send in any way whatsoever, therefor a new session on the server is started.
If you open a new window from within the first session this might not be the case, you can run multiple windows in the same session.
Either way, I would recommend to search the forum, there have been discussion about this (or a similar) topic, e.g. accessing the same model instance - it would be best if you look for them, read them, and if you have any questions left come back for more
Cheers,
Max

Import catalog numbers for multiple BP at the same time

I have to import different groups of the same catalog numbers for multiple business partners. I have been looking through the DTW templates and have not found it yet. Does this functionality exist and if so where would I find it? If not what to do, enter each one by one
thx,
Richard.

Hi,
I just looked at the available templates... I would use the oAlternateCatNum one.
Regards,
Eric

Multiple download of the same JAR file

We have a collection of applets packaged in a single JAR file. Some users (web developers that use our applets) have been complaining that the applet is extremely slow to start up.
When the html page includes more than one applet from the same JAR file then, "ONLY IN SOME CASES", the JAR file is downloaded multiple times.
By capturing network traffic we can also think that the JAR file is downloaded even when accessing an image packaged in the applet's own JAR file.
One further detail: this "DOES NOT OCCUR" when there is a fast connection to the server (or at leat it seems so). In these cases, the JAR file is downloaded once. It looks as if the problem only occurs on slower network connections.
Thanks in advance for any help.

Mmm... I don't think this is the solution... all the applets share a lot of classes (the big part of the JAR files).
But my question is....: why in some cases the JAR is downloaded more than once???

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Similar Messages

Maybe you are looking for