Export of database not working
Hi,
I have Oracle 8.1.7 server/client on same machine (standalone)...i have created 2 database...db1(dbname - xxx) & db2 (dbname-yyy)
I wanted to take a database dump using "exp.exe"...
for my db1 i was able to take with the following commands..
d:\oracle\ora81\bin\exp.exe sys/change_on_instal@xxx file=d:\db1.dmp buffer=1000000 Full=y log=db1_exp.log compress=y
But when i tried for db2 with the dabname changed...
d:\oracle\ora81\bin\exp.exe sys/change_on_instal@yyy file=d:\db2.dmp buffer=1000000 Full=y log=db2_exp.log compress=y
But the problem is that it again takes the dump of db1 ...even with the dbname change to yyy...but the database db1 & db2 are working fine...
does anyone faced such a problem? anybody can help me?
thank you in advance
Manoj
Hi,
Thx for replying...
Yes i am able to loginto both DBs (xxx & yyy)...thru Sqlplus with user "sys".
I am pasting teh entries for the tnsnames.ora,listener.ora& snmp_ro.ora here...
xxx - DB1 whose database i was able to export
yyy - DB2 which is not successful
Thank you
Manoj
listener.ora:
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 2481))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = yyyB)
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = yyyB)
(SID_DESC =
(GLOBAL_DBNAME = yyy)
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = yyy)
(SID_DESC =
(GLOBAL_DBNAME = xxx)
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = xxx)
tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
# Date..........: Mon Dec 01 05:58:49 PST 2003
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = xxx)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
yyy =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = yyy)
xxx =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xxx)
snmp_ro.ora:
snmp.visibleservices = (listener, xxx, yyy)
snmp.shortname.listener = LISTENER
snmp.longname.listener = listener_server
snmp.configfile.listener = D:\oracle\ora81\network\admin\listener.ora
snmp.oraclehome.listener = D:\oracle\ora81
snmp.servicename.listener_server = OracleOraHome81TNSListener
snmp.SID.xxx = xxx
snmp.oraclehome.xxx = d:\oracle\ora81
snmp.address.xxx = (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=ORACLE)(ARGV0=ORACLExxx)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))
snmp.remoteaddress.xxx = (DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521)))(CONNECT_DATA=(SID=xxx)(SERVER=DEDICATED)))
snmp.SID.yyy = yyy
snmp.oraclehome.yyy = d:\oracle\ora81
snmp.address.yyy = (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=ORACLE)(ARGV0=ORACLEyyy)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))
snmp.remoteaddress.yyy = (DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = server)(PORT = 1521)))(CONNECT_DATA=(SID=yyy)(SERVER=DEDICATED)))
ifile = D:\oracle\ora81\network\admin\snmp_rw.ora
ifile = D:\oracle\ora81\network\admin\sqlnet.ora
Similar Messages
-
Hi
I'm using JDeveloper 11g TP4 and in Firefox 3.X export to excel not working
Regards,
JavaDeVeLoperJava developer,
Firefox 3.x is not one of the documented supported browsers for 11g TP4 (FF 2.0.x and IE 7 are).
I'm assuming by "export to excel," you are talking about an adf faces table?
John -
Hello,
I am having a 10g release 1 database on my HP UX server.
The problem with this database is it's listener is working emagent is working fine.
But I am trying to login with system password then it shows me error like
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directoryModerator Comment:
The O.P. had already asked this question in the Solaris 10 forum.
Database not working
I had already moved it to the Database forum.
Then after the comments in this thread, they've re-posted it yet again into the Database forum.
Not able to connect / as sysdba
and spammed it to the Oracle Linux forum:
Not able to connect / as sysdba
Handle: user8856758
Status Level: Newbie
Registered: Jun 22, 2011
Total Posts: 6
Total Questions: 4 (3 unresolved)@ user8856758 ,
You've been here long enough to know better, so we can only assume you are just being inconsiderate or rude with all your crossposts.
They're all locked. -
Export vCard is not working on Chrome; on Chrome Version 40.0.2214.93 m; function works on Mozilaa and IE; is anyone else seeing this same issue?
Update; my OS is Windows 7 Pro 64-bit v1.08.00.AF B09 SP1. Same issue reported (by 7 others) at => https://discussions.apple.com/thread/6779059
-
Why is exporting to PDF not working?
Why is exporting to PDF not working?
Dear Claudio,
I know it wasn't much to go on but I got your attention!
I work for a charity and use a program called "Donor Perfect".
It has a feature that when you generate a report it gives you the option to export to MSWord, Excel, and PDF.
Below is the step by step description of what happens.
After log on ......
1. Click on Reports
2. Listings
3. Report Category(any)
4. Select Record type(any)
5. Select report options (any selection filter that fits or Build a filter) and sort order(any)
6. Enter title (accordingly)
7. Click on Preview
8. When next screen opens with report visible - in "Report Print preview" line above report choose PDF icon
9. Export to PDF window opens
10. click on Page range-ALL
11. What to print-All pages in Range
12. Save as C:\DPW32\dpsumm.pdf
13. collate
14. number of copies(1)
15. Click on "Screen"
16. Click on "Display Conversion Status"
17. Then "OK"
18. After conversion status reaches "100%" nothing happens -screen does not change!
Then I minimize DP screen and I go to Start menu
1. Click on Start
2. Then "My Computer"
3. Local Disk "C"
4. Dpw32
5. Look for "dpsumm" file with today's date
6. Size of file says 0 KB and that's it!!!!
In previous versions of DP (8 and 9)
the PDF would open on the screen as soon as the Step 18 was finished, then I could save it with an identifying name to a different folder and use it as an attachment that a Donor could receive by e-mail.
I hope I can get back to that because now I have to convert to "Word" (Which takes a long time)then from that I have to create PDF from Acrobat. too many steps ..... if I have 20-30 reports it's too cumbersome.
Waiting for your suggestions, -
5.0 database not working in lookout 6.6
5.0 database not working in lookout 6.0. I converted the database using the lks file and then saved it. that all worked fine but my modbus stats are in 100% error connected with direct serial! any known fixes? help please!
Is this MODBUS or the database?
To use the 5.0 Databaes you need to use the NI MAX utility to convert a citadel 4 to Citadel 5 database.
Forshock - Consult.Develop.Solve. -
Export-Mailbox - DeleteContent not working
Server: Exchange 2007 SP3 RU 10
Client: Outlook 2010 SP1, OWA with IE 9
++++
According to this (and other sources)...
http://technet.microsoft.com/en-us/library/bb266964(v=exchg.80).aspx
I should be able to search for, and delete, messages using this command:
Get-Mailbox -Database DB1 | Export-Mailbox -SubjectKeywords "Virus message" -DeleteContent
"This example first gets all the mailboxes on database DB1, searches for items that contain the string "Virus message" in the subject, and deletes those items."
+++++
I only tried this because a colleague mentioned that he had tried and could not make it work. So I though I would investigate.
So I had test user Alan Reid send seven emails to test user Aisha Bhari. The subject was respectively: Blue, Red, Yellow, North, South, West and East. The content was "Export-Mailbox test 1" then 2, 3, 4, etc.
So at the start of the experiment, Aisha Bhari's Inbox looks like this:
Thinking, at first, that I needed to have an export folder (in fact, if I just want to delete, that is not necessary) I executed the following command:
export-mailbox [email protected] -TargetMailbox ExportMailbox -TargetFolder ForDeletion -SubjectKeywords
"Red" -DeleteContent
Then realizing that was not necessary, and that the processing of the Calendar and Contacts was delaying the experiment, I used this command:
export-mailbox [email protected] -SubjectKeywords "Red" -ExcludeFolders "\Calendar","\Contacts" -DeleteContent
I tried "Red" with and without quotes.
I tried "Blue" and "North". I tried the -ContentKeywords switch with strings like "mailbox" and "test".
The output that displays after the command is executed puzzles me. I read:
StandardMessagesDeleted : 0
AssociatedMessagesDeleted : 0
DumpsterMessagesDeleted : 0
MoveType : DeleteOnly
MoveStage : Completed
StartTime : 12/26/2013 4:36:56 PM
EndTime : 12/26/2013 4:37:28 PM
StatusCode : 0
StatusMessage : Messages have been deleted from the source mailbox.
0 messages have been deleted and "Messages have been deleted from the source mailbox."
If I look at the content of Aisha's mailbox however, the message "Red" is still present, observed in both Outlook and OWA, after logging off and back on again. And thus, obviously, closing and opening both Outlook and OWA. What I see is what you
(still) see in the image posted above. That's it.
Does anyone know why this is not working?
+++++
What about the logs? Well, there is one created for each "export" attempt. Here is one example:
[12/26/2013 5:35:01 PM] [0] Executing Command: 'get-mailbox
[email protected] | export-mailbox -ContentKeywords "Mailbox" -ExcludeFolders "\Calendar","\Contacts" -DeleteContent '
[12/26/2013 5:35:01 PM] [0] Administrator Active Directory session settings are: View Entire Forest: 'False', Default Scope: 'mynet.lan', Configuration Domain Controller: 'DC2.mynet.lan',
[12/26/2013 5:35:01 PM] [0] Searching objects "[email protected]" of type "ADUser" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Preparing to output objects. Maximum result set size "1000".
[12/26/2013 5:35:01 PM] [0] Searching objects "mynet.lan/ExchangeUsers/Aisha.Bhari" of type "ADUser" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on global catalog server 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Processing object "mynet.lan/ExchangeUsers/Aisha.Bhari".
[12/26/2013 5:35:01 PM] [0] Searching objects "ex1" of type "Server" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:01 PM] [0] Searching objects "ex1\SG1\MBXDB1" of type "MailboxDatabase" under the root "$null".
[12/26/2013 5:35:01 PM] [0] Previous operation run on domain controller 'DC2.mynet.lan'.
[12/26/2013 5:35:04 PM] [0] Ending processing.
[12/26/2013 5:35:04 PM] [0] Ending processing.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has started.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Approving object.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Trying to open mailbox:
szServerLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=ex1
szUserLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Aisha.Bhari
szServer: EX1.mynet.lan
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Open mailbox succeeded.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has finished.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has started.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Approving object.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Opening source mailbox.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Trying to open mailbox:
szServerLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=ex1
szUserLegacyDN: /o=MYNET/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Aisha.Bhari
szServer: EX1.mynet.lan
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Open mailbox succeeded.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Moving messages.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Exporting messages.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Merging messages.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] 0 items could not be moved to the target mailbox.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] Messages moved. Closing connections.
[12/26/2013 5:35:04 PM] [0] [Aisha.Bhari] The operation has finished.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.Hi David,
From your description, I would like to clarify the following things:
1. You need to grant the account which perform the task the full mailbox access permission.
2. Export-Mailbox only marks the items for delete. It doesn't actually delete them. So "-DeleteContent" only marks it for deletion. Your mailbox retention schedule will delete the actual emails.
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Export function is not working.
Hello gurus,
I am using the export function and I am unable to download the tsv file.
We have 2 development instances (both R12) and it works on one of them but not the other.
The file I am trying to export is under OM\Quick Order Organizer\Holds Information tab\Hold Sources button. Menu: File, Export
At the decision dialog, select Continue to End then the exporting data form pops up for a split second and goes away with no export tsv file created.
Can someone help me with this. Thank you!Please review the database log file for any errors.
Also, make sure all pop-up blockers are disabled at the client side.
Please go through the troubleshooting docs referenced in the old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Export+not+Working&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
DB13 Check database not working
Hi All,
Check DB and update stats from DB13 does not work. It comes back with the following error
Can't exec external program (No such file or directory)
Checked from OS level and found that brconnect -u / -c -f check works only from exe directory. If i execute the
command from any other directory it comes back with an error saying command not found
Upon further investigation found that this is an issue with env variable PATH
The current value of PATH in env variable of sidadm is
PATH=/oracle/SID/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/export/home/sidadm:/usr/sap/SID/DVEBMGS01/exe:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
I want to change the value from usr/sap/SID/DVEBMGS01/exe to /usr/sap/SID/SYS/exe/run
I checked all the csh and .sh profiles for sidadm user but i did not find any PATH variable,
I can see DIR_LIBRARY and LD_LIBRARY_PATH but i cant see PATH variable
Checked the shell and it is /bin/csh
checked .bash_profile and all i can see is this
.bash_profile
Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
Has any one faced this issue earlier??
Meanwhile i have found a temporary fix for timebeing i.e i copied all the br* executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and after doing that DB13 - DBcheck and Update optimizer works fine.
Regards,
Ershad AhmedHi Sunil and Eric
Thanks for the reply
I checked all the profiles but no luck. I cant find the parameter.
As i mentioned in my earlier post i have found a temporary fix by copying the br executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and ran saproot.sh and that resolved the issue.
If i can change my PATH variable to point to /usr/sap/SID/SYS/exe/run that would be a permanent fix
Regards,
Ershad Ahmed -
Hello,
We are on HFM 11.1.2.1.103 and I am getting an error message when trying to export a users activity from the "Task Audit" menu. When I click on export a new tab comes up with the URL http://server:port/hfm/Administration/TaskAuditExport.asp and then I get an error message:
An error occurred on the server when processing the URL. Please contact the
system administrator.
If you are the system administrator please click here to find out more
about this error.
And when I click on "here" it takes me to this URL Running Classic ASP Applications on IIS 7 and IIS 8 : The Official Microsoft IIS Site
Any thoughts on how I resolve this would be much appreciated.
Thank you,
JasonSDM,
Thank you for the response. This is helpful and I was able to extrac the data, but this utility doesn't give you the ability to focus on one users' activity as you can from the web. Why is it not recommended to use the web and is there a way to get that working properly?
The reason the utility is not working for my purpose is I want to view a few users' activities over the last year and when I run the utility it gives me everyone and extracts the data across numerous files, which is not particularly easy to work with.
Thanks. -
Database not working when network is offline
I have installed Oracle 11gExpressEdition in my office laptop. It works fine if my laptop is connected with my office network and its not working outside office network. I am trying for long time to resolve this issue but couldn't able to find success.
I tried with changing Pcname in "C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora" AND "tnsnames.ora" TO "localhost" and "127.0.0.1".
Installed Windown loopback adapter and reinstalled application. But nothing works.
Can you please help me
Thanks in Advance..Thanks for your replay,
Add to my question, database instance is running and my application can able to connect to database only issue is the link using for management portal
http://127.0.0.1:8080/apex/f?p=4950
is not working showing "Cannot display the webpage".
Here is my listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO) -
Hi I have created one standby DB for Oracle 10.1.0.2.0 on same server for the primary Db.As per Oracle docs I have configured everything but when I do logswitch on primary DB and then check the standby DB as...
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
it shows no records, that means it is not working.
I have created standby redolog file in the primary DB , as I am using LGWR ASYN mode of redo transform but when I do..
SQL> SELECT GROUP#,THREAD#,SEQUENCE#,ARCHIVED,STATUS FROM V$STANDBY_LOG;
GROUP# THREAD# SEQUENCE# ARC STATUS
4 2 0 YES UNASSIGNED
it show the status unaccessed.
please help me to sort out this problem....
RegardsHi
Thanks to all. Yes I checked the alert logs for both DB, there was some problems due to DB_FILE_NAME_CONVERT ini parameter setting. after I fixed that, I am getting this error in lgwr.trc file
Dump file c:\oracle\product\10.1.0\admin\orcl\bdump\orcl_lgwr_1368.trc
Tue Mar 11 15:39:17 2008
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:14M/255M, PG:123M/909M, VA:1749M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 5
Windows thread id: 1368, image: ORACLE.EXE (LGWR)
*** SERVICE NAME:() 2008-03-11 15:39:17.008
*** SESSION ID:(167.1) 2008-03-11 15:39:17.008
LGWR: Archivelog for thread 1 sequence 42 will NOT be compressed
*** 2008-03-11 15:39:17.227 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
*** 2008-03-11 15:39:17.258 45203 kcrr.c
Initializing NetServer for dest=stby
Initializing PGA storage for Netserver communication
Allocating a brand new NetServer
Allocated NetServer 0
NetServer 0 has been started.
Subscribing to KSR Channel 0
success!
Indicating recv buffer for KSR Channel 0
success
Waiting for Netserver 0 to initialize itself
*** 2008-03-11 15:39:20.415 45488 kcrr.c
Netserver 0 has been initialized
LGWR performing a channel reset to ignore previous responses
LGWR connecting as publisher to KSR Channel 0
LGWR-NS 0 initialized for destination=stby
*** 2008-03-11 15:39:20.415 45982 kcrr.c
Making upiahm request to NetServer 0
Waiting for NetServer 0 to respond to upiahm
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer 0 (ocis 0x05FCE6E0)
NetServer pid:2916
*** 2008-03-11 15:39:24.274 47331 kcrr.c
upidhs done status 1031
*** 2008-03-11 15:39:24.274 46176 kcrr.c
upiahm connect done status is 1031
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
ORA-01031: insufficient privileges
*** 2008-03-11 15:39:24.336 52124 kcrr.c
LGWR: Error 1031 creating archivelog file 'stby'
*** 2008-03-11 15:39:24.383 50571 kcrr.c
kcrrfail: dest:2 err:1031 force:0 blast:1
*** 2008-03-11 15:39:37.680
Old character set id was US7ASCII
*** 2008-03-11 15:39:38.055
New character set id is WE8MSWIN1252
now how to give privilege to the service 'stby'.
please give me some guidance.
regards -
I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
ThanksHi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result. -
Multiple Image Upload with save to database not working in IE anymore
Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
> -
Export to powerpoint not working for certain views
Hi All,
I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
During testing, it is observed that export to powerpoint object is not working for the following views.
1. Condensed Org. Chart
2. Compressed OrgChart -Only works when we expand at least one position
3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
In all the other views the export to Powerpoint object are working fine.
Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
I have implemented Export Pack 3.0 for OrgChart.
J. ThomasHi Luke,
Thanks for the response.
Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
The following features are working fine.
1) Export to PDF
2) Export to JPEG
3) Export to Powerpoint Image.
Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
The error message that is flashed for the user is the usual one....pasted below.
Object Variable or With Blovk Variable Not Set.
Export To PowerPoint
Compatibility
We currently support:
Microsoft PowerPoint 2000 / 2002
Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
In the log file, the following error message is displayed.
ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
Warm regards,
J. Thomas
Maybe you are looking for
-
I am not sure Essbase has the capacity to do this but I figured this would be the place to ask. Can you set a member formula to return text instead of a number? For example, in Excel you can set up an If statement that will return a number or text de
-
Office 2013 Programs open up staticy, unresponsive
Hello. My mother has recently purchased Office 2013 for school purposes. We installed Office 2013 on her PC, and it refuses to show the application. Instead, filling the screen with static like bars. Minimizing/killing Office from task manager remove
-
My 2010 Macbook pro is running slower and slower. I went to the Genius Bar about eight months ago, and they botted up from the disk, and let it go through and find what its process to find and fix what I think were "orphan" files. I cannot remember
-
Al my apps in my ipad is lost how to put back in my ipad
al my apps in my ipad is lost how to put back in my ipad
-
Which data sources I need to use for Actual&Plan comparision of GL Account?
Could you please let me know which datasources I need to use for Actual & Plan comparision of GL Account data? Current SAP BI version is BI 7.0. As per my knowledge, I am thinking of using the datasources 0CO_OM_CCA_1 for Plan data & 0FI_GL_10 for Ac