Export part of the project

Anybody found a way to only export a section of a project? IN FCP 7 I would just go in the timeline and press I and O to select the wanted area and that's it. It's a very useful feature if I need to export a clip to do some stuff in AE and then bring it back in FCP.
It was also useful because I could leave some clips in the time line that I could use later but they would not be exported because they were outside the in/out section of the project.
The only work around I found is to select a part of the clip I want (I may have to do a compound clip first), copy it, create a new project, past it and export. It's a long and unefficient workflow.
Ay idea?
Robert

Sorry, you can't. Other people have made threads about it too. Your work-around is the only one available.

Similar Messages

"Part of the project was not played" error

I just got a brand new iMac--double the number or processors and twice the RAM as the old one--and I keep getting this error in Garageband:
Part of the project was not played
This project has too many real instrument tracks to be played in real-time.
To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
This issue only rarely cropped up on my old machine, and it was usually because the computer was chugging away on too many projects at once. I am editing a podcast which has two (rather long) audio tracks.
I have quite all other applications.
I have fixed permissions.
I have tried from another user account.
I have deleted prefs files.
I have reinstalled Garageband.
Nothing is helping. This is very frustrating.
Any guidance you could give me would be EXTREMELY appreciated!
Thanks!
Evan

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

IMovie '08 exports only part of the project

I use iMovie '08 (7.1.4) and I want to export a 28 min. project to .avi.
After the export, without producing an error message, it turns only the first 4 minutes or so have been exported. The quality of those 4 minutes is fine, but I have no clue why it does not export the rest:
- I can't find anything wrong with the project or the files in it; the last frame of the (failed) export is in the middle of a fragment.
- I have about 28 GB of free space on my HD so that shouldn't be a problem (I even tried exporting to my external HD with 600 Gb free space, same problem)
- I export via QuickTime and use the same settings I always have and which worked fine until now.
Anyone got any clue what the problem could be?

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

Applying a User Filter web part to the Project Summary Web Part

I've been searching for a way to do this but to no avail!
Is there a way to filter out the Project Summary Web Part to only display MyItems.aspx?
nothing seems to work. I have designer 2013, SharePoint 2013, etc.
Please advise,

Hi Boxboy,
Based on your description, my understanding is that you want to only display current user’s tasks in the Project Summary web part. Is it right?
Project summary web part displays events and tasks in SharePoint 2013. Per my knowledge, we cannot filter the tasks in the OOB Project summary web part.
More information about Project summary web part:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/07/11/how-to-use-the-project-summary-web-part-in-sharepoint-2013.aspx
As a workaround, you can filter the orginal tasks list using Current User Filter web part instead of filtering the Project summary web part.
Or, you can develop your own Project summary web part using code.
How to create a web part for SharePoint:
https://msdn.microsoft.com/en-us/library/ee231546.aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Export part of the timeline

Hi,
Is it possible to mark in/out on the timeline and only export this part in PPRO CS3?
Thanks in advance.
/Ulf

You can do it, but not with In & Out points. You do it by setting the work area bar to the portion you want to export, and setting the export options to Work Area rather then Entire Sequence.

How to export part of a project?

Hi Everyone,
I have a project which I need to trim to the length and size required to export to youtube. once its all trimmed and broken down to 3 or four clips how can I export one clip at a time.
In FCP all I do is mark in and out and it only export the marked clip. Is there similar way in imovie 9?
Appreciate your help.
Mo

mohammed saif1 wrote:
.. In FCP all I do is mark in and out and it only export the marked clip. Is there similar way in imovie 9?
no. not anymore.. (iMHD≤6 had a 'export selection only'-feature)
workaround:
• in the Project Browser, ctrl-click your project, choose 'Duplicate'
• in duplicate, erase all content, except the first 10min ..
• upload
• repeat steps for 11-20, 21-30 and 31-40min of project...

What all files required to be exported to get the project back in future?

hi all,
can anyone please tell me what all files are required for a project to be exported.
i've created a project and now i want to export all the files so that i can get the project in future.
regards,
prateek sharma.

You will want to export Projects, Models, scenarios and logs.
For version Management Please refer following doc (ODI best Practices):
http://www.oracle.com/technology/products/oracle-data-integrator/pdf/odi-bestpractices-datawarehouse-whitepaper.pdf
Espicially Lokk for version management.

How can I burn just a selected part of the project to DVD?

Afternoon all,
we downloaded a number of clips from our HDV that we wanted to use in making a short movie (1 hour's worth of clips will end up being a movie of about half that length). After doing that, we decided to do a 'preview' of 2 minutes worth of mixed clips (5 in total) with music.....I made a new copy of the whole project and then deleted everything that we didn't want from the original collection of 1 hours worth of downloaded clips so that the project just left 2 minutes worth of clips.
When we tried to burn this 2 minutes to DVD it seemed to be trying to do the whole project including a whole lot of nothing where I've deleted everything.
Could you please tell me how to select only the 2 minutes worth of 5 clips and audio so that I can burn only that bit to DVD and also upload it to YouTube.
A million thanks from a challenged newbie who can't find any instructions for doing this..
JON

Jon,
It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
Good luck,
Hunt

Can't open a file. It may be corrupted? Any way to rescue all or part of the project?

With all the updates FCPX has undergone and the constant updating of my libraries I seem to have lost the ability to edit a previous project which is now critical to me.
What happens is:
I locate the event in the library
I click on the project (so that it will load it in the timeline)
I get the drop down window saying "Loading 'name of project' into the timeline"
That's it. It never gets past this. FCPX crashes. Only a force quit will bring it back.
I'm wondering if there is any way to bring it back, or at least rescue some or most of the project.
Anyone out there who can help me, I would be SOOO grateful.
Thanks

Do you remember whether you had gone inside the library bundle and either moved or modified any of the files stored in that event?
I suggest starting with the ;library backups folder. The FCP X version on 3/2104 was using the current Library model and so you should have library backups that were created automatically when you first worked on your project. The default location is in Movies/Final Cut Backups, Double-click any of them to see whether the project will load correctly.
Russ

I keep getting "Part of the project was not played" during playback

"This project has too many real instrument tracks to be played in real-time.
To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help."
I went to the help but I can't seem to find a problem. Running gb11 V6.0.5 on a macbook processor 2.2 GHz intel core i7 with mem 8 gb 1333MHz DDR3
I only have two "real instrument" tracks using basic effects....track 1 is acoustic guitar and vocal and track 2 is mandolin.
I must have a setting causing havoc somewhere i guess.....nothing else running on computer.
Any ideas on what i need to do?

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

Is it possible to export part of the FCPX Project from timeline

Is it possible to export a selection from the FCPX timeline or do I have to export the entire project and then edit it in another program.

andynick wrote:
Goldfish wrote:
FCP7 was much better for this:
Yes - but you don't mention the billion ways in which FCP X makes FCP 7 totally obsolete.
Andy
I didn't think it was relevant to the thread.
I'm simply encouraging the return of a few features that were left on the cutting room floor - no harm in that.
I O markers and chapter markers are a few of them and routinely a topic of discussion. It's not just me.
For the record I'm a big Fan of FCPX. It has many of the features that I said, for years, should be added to FCP7 - and I took a lot of heat over the years for pointing out the deficiencies in FCP7.
When a new editor comes to the forum and asks "why can't i do this really simple thing" , I think it's better to acknowledge his observation and encourage constructive feedback to Apple rather than implying that he was stupid for knot figuring out a convoluted work-around for something that should exist in the program.
If your post had started with "here's a work around…." rather than " takes seconds…"
and you had finished with "…hopefully we'll see I O markers in a future update…"
Rather than "…Ctrl+Zs to get back to previous state." you never would have heard a peep from me.
I just find the apologist mentality difficult to ignore. No offense intended.
best regards,
g
PS - I also think "totally obsolete" is a bit of a stretch.

Export file with the project separated into the different tracks

I have created a project consisting of about 18 imported tracks (bought from Itunes). Is it possible to have the imported components separated in the export file from GarageBand so it would be possible to jump between them?

Hi
I wil suggest mapping the path based on a common location is the best way and then map the same logically in the Upload method
If you are using Citrix then it becomes all the more easy to have a commmon location
Rgds
Dheeraj

Should we save the connection as a part of the project

Hi,
should we do that?
Bst rgds,
HuaMin

Hi,
Assuming you are using 11g, you can also use JDBC Data Source instead of JDBC URL (in your app module - assuming you are using BC4J), and create the jdbc data source in the WLS. So that you don't have to modify the connection details in the application when switching to different db (Just you need to modify the DS you've created in WLS).
Re: JDBC URL / JDBC Data Source in Appmodule is the step by step instruction.
-Arun
P.S : It is a good practice to post the JDev version, technologies used in each of your question/posts, which would help us to provide helpful answers instead of guesses and assumptions.

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Export part of the project

Similar Messages

Maybe you are looking for