Export Problem with Color Image Washing Out

I did an export of an image from DNG to JPG in LR4. Funny thing is, the JPG suddenly appears with a washed out look. It looks the same in Develop and Print modules also.
It gets even funnier, because when I use Finder to check the photo, the preview of the image is fine. I also opened the image from Finder in Photoshop CS5 and it is fine there. I also opened the image in PSCS5 from LR4 with "Edit In" and again the image in Photoshop is fine. So this appears to be a view issue in LR4. I did not print out the washed out photo but I suspect it would print out as it appears in LR4.
I've done some other image exports from DNG to JPG with other images and they do not have this problem but those were black&white converted images. However, I did check doing an export of another color image with the same result as the problem image. Here are screen captures of the DNG and the exported JPG (I was going to upload the exported JPG, but like I said it appears fine in Finder):

My monitor calibration is just fine. I was saying that because similar
problems are almost always due to bad monitor profiles. If you calibrate
regularly using hardware calibration then you're probably fine. Many people
use canned profiles from monitor manufacturers however and lightroom is
highly sensitive to those and shows messed up color depending on the
source. In this case however, since the restart fixed it it was likely a
bad preview image. I have seen before that LR sometimes is lazy in
refreshing those and can show you strange results that only get cleared up
by forcing a preview refresh.
Last your top screenshot DOES show that you are pushing the red in that
dress out of the monitor gamut. You can check this in the soft proof in LR
4 by turning on the monitor gamut warning. If you blow the color out of the
monitor gamut the preview is no going to be accurate no matter how good
your calibration. Just a cautionary warning.
Sent from my iPhone

Similar Messages

Problem with fading images in/out

I have a product demo that runs from an XML feed. Text is
defined in the XML as are links to external images. When an image
loads it is set to alpha 0 and then fades up to 100 whilst also
changing from blurred to a crisp image using a blur filter.
When I publish the file and preview it there are horizontal
lines of white pixels that that flicker across the image like
interference as it is fading in. Once the fade is done the
interference stops but any visible bits of it stay on screen.
If I run the generated SWF in a browser this does not happen
and so I didnt worry about it. Now though, I am trying to output
the demo as a video clip to run from a DVD. I am using
File>Export>Export Movie and this picks up the interference
as well.
I have tried various compression setting with no luck and am
thinking I might have to use some third party screen capture
software (camtasia?) instead.
Any thoughts?
Cheers all

hi Markus,
found the following in DB:
"Problem Description:
I have my SCC configured with a LabVIEW perforce client. If I open the VI \examples\comm\access.llb\Retrieving Data from Access.vi and then from its block diagram open the subVI with a icons that says "2", then modify the sub VI, I don't get prompted to check the sub VI out. Howewver, if I close everything down and open the Part 2.vi from the GSW, then it does prompt for check out when I edit it.
Steps to Reproduce:
Make sure the prompt to check out SCC config option is set. 1. Launch LV. 2. Create a new project. 3. Add a VI to the project that is in SCC (not checked out) AND has a subVI that is also in SCC (and not checked out). 4. Open the VI from the project. 5. Go to the block diagram of the VI and open the subVI. 6. Edit the subVI. No prompt to check out is presented.
Workaround:
1. Explicityly add the subVI as an item under source. 2. Refresh the dependencies node after adding the main VI."
furthermore I found this link but I don't know if this will help...
greets!

Export to Movie - color all washed out

so after spending hours editing I output to video only to find the colors looking like the went through the wash ... with extra bleach. The clips look great in iMovie but the resulting output blows.
am I doing something wrong?
thx
gf

Welcome to the  Discussion Forums
am I doing something wrong?
What exactly are you doing? (import format/compression types/export format etc)

Problem with displaying images exported to PS

This is slightly different than the post about TIFF files not displaying properly.
In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
I'm hoping there's some setting somewhere I can use to fix this. Is there?

David,
I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
Chris

Problem with scramb image MULTI DISTORTION COLOR

PROBLEM WITH IMAGE, SOMETIMES ITS DISTORTIONATED, AND SLOW

Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
Clinton

Color - sRGB washing out in Windows apps

Hello,
I'm having a color management issue. I use CS3 and the Spyder2Express color calibration system. I presently have my system (Windows) set to the Spyder2Express profile found under the display properties. I have Photoshop set to sRGB under edit-color settings. I am for some reason suddenly (in the past few days) having big issues with editing the photo in Photoshop to look as I want, then it experiencing a large color shift when viewed in any Windows application or uploaded to the web (IE7). Colors look very dull and washed out compared to Photoshop.
From my experience, the opposite has been true if working in Adobe RGB and failing to save to sRGB before uploading the image to the web - the images wash out. So, why are my images washing out if working in sRGB as my Photoshop color space to begin with? Any Photoshop + windows experts combined that can help? I am pulling my hair out. I need to upload photos to my blog (I am a photographer) and they look super dull compared to how they view in Photoshop! Thanks in advance for your help.

My monitor calibration is just fine. I was saying that because similar
problems are almost always due to bad monitor profiles. If you calibrate
regularly using hardware calibration then you're probably fine. Many people
use canned profiles from monitor manufacturers however and lightroom is
highly sensitive to those and shows messed up color depending on the
source. In this case however, since the restart fixed it it was likely a
bad preview image. I have seen before that LR sometimes is lazy in
refreshing those and can show you strange results that only get cleared up
by forcing a preview refresh.
Last your top screenshot DOES show that you are pushing the red in that
dress out of the monitor gamut. You can check this in the soft proof in LR
4 by turning on the monitor gamut warning. If you blow the color out of the
monitor gamut the preview is no going to be accurate no matter how good
your calibration. Just a cautionary warning.
Sent from my iPhone

How come Colors are Washed Out, FCE QT Conversion H.264

I have searched this forum on this problem, but nothing I found directly addresses this.
I have transcoded 1080p h.264 video to AIC, editing in FCE4 works beautifully. If I export to QT movie only converting to h264 original size, a 3 minute video becomes 3 GB but the playback in QT matches the colors I see in FCE. If I use FCE to QT conversion to a smaller size, 640x360 h.264, the colors get washed out. I tried MPEG Streamclip to convert the 3GB version, and the colors are beautiful, but even at 100% quality, the video looks slightly pixelated.
Still on MAC OS X 10.5.8 with QT7. Any thoughts?
Thanks,
Nelson

it's an old bug, and one I hoped had been fixed with the release of QT7.
there is supposedly a field in the mov file which indicates the Gamma of the mov. from memory, QT is either not writing the value, or it's ignoring the value when the mov is played back. the bug is also evident in Safari. it only affects movies exported as H.264 (which is laughable since Apple has been heavily promoting H.264 for quite some time)
I have an urgent project for friends overseas. this is not a welcome predicament.
search the net for "quicktime gamma fix" and you'll find a raft of web pages regarding the problem. for example, Luxology Quicktime Gamma Fix.
disappointedly,
Gregory

Strange problem with color measure in Mac.

Hello, I am having a strange problem with color measure in Mac. For example i create a gradient in Photoshop from color 200 200 200 to color 240 240 240. When i measure the color of the gradient with the color measure tool of Photoshop or with the built in OS X color measure tool the measured color is from 200 199 197 to 240 240 238. I have measured the same gradient with Photoshop for PC and the values are OK (the same values that i create).
I dont know what is the problem, but i belive that the colors that i create would be the same that i measure after creating them, and also the same values between Mac and PC. I will appreciate it a lot any help or information that you could give me that helps me to understand what is happening here.
Thank you for your time
Marcelo.

Yep you got it, proof as monitor basicaly strips out any profiling and just delivers it straight.
is there any way to make the OS X color measure tool to measure the original color values
You mean the document colors - No, like I said photoshop is filtering your image through document profile, proof setup and monitor profile. Why do you want to use Digital color meter anyway for this?
i dont understand what is the point to measure color values that will change every time a calibrate my monitor.
Because color values are 'bigger' than whats on your monitor. Your monitor (via photoshop) is only doing the best it can to display those values - which can be anything from LAB colors outside the gamut of your monitor - to CMYK colors. Calibrating it is the only way to allow your monitor to do this in any way accurately. (not ever really possible) Monitors have a certain gamut and are only dispays/representations of the REAL colors that a document, with a profile, holds. So there's only one good reason to measure monitor values, and that's to generate a monitor profile.

Problem with Gif image

Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
JPanel toolBarsPanel = new JPanel();
javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
toolbar.add(zoomin);
toolbar.add(fullext);
toolbar.add(identify);
toolbar.add(btn);
add(toolbar, BorderLayout.NORTH);
Thanks again for any help!

I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
The only two things I can recommend are:
- complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
- assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
HTH,
Manuel Amago.

Problems with colors running CS4 and W7.

Hey everyone.
I'm having some MASSIVE problems with colors on my system.
Windows 7 Prof 64bit
Photoshop CS4 64bit
6g Ram
1T hard drive
Nvidia GeForce 9800 GTX+
Dell SE198WFP Monitor
The system itself is a Dell Inspiron 530 that I put into a Black Widow V9 gaming tower.
Here is an example of the issue I'm having:
http://findae.deviantart.com/art/Converge-101214480
http://i38.tinypic.com/bjcymr.jpg
The top image is a (admittedly old and crappy, but it shows the problem) photo that I had previously edited and put in my portfolio. The tinypic below is the result of copying that photo from the portfolio, pasting it into photoshop, and then saving it into a jpg. As you can see, the transitions between colors and the contrast are a complete mess.
Thing is, my hard drive recently quit on me, and I had to install the operating system and such on a new drive. I remember having this problem with the system when I first had it, but it either went away on its own or I fixed it somehow before. Now I can't remember for the life of me how I got rid of the problem, and I certainly don't know what the problem is in the first place. I'm tempted to think it may not be photoshop itself, but the problem seems to be especially bad when I'm working with photos.
Anyone have any idea what the problem might be and how to solve it?
Edit: I also noticed it when viewing http://findae.deviantart.com/gallery/#/d1hni37 in firefox, whereas the other photo appeared to be ok before I copied and pasted it. It has extremely obvious lines of green and orange in the transition from light skin tone to dark skin tone. Annoyingly enough, this doesn't show up in the thumbnail within my gallery at all, only when I click on the thumbnail and see the fullsize image. Extremely frustrating.
Here's another good look at the problem while selecting a color in photoshop: http://i37.tinypic.com/2h6t7gh.jpg All I did was screenshot it a few times, and it deteriorated to that point.

Screen glitches like color blocks appearing where they shouldn't could indicate a problem with your video drivers.
Go to the nVidia site and see if they've released any updated drivers; people often report that updated drivers are correcting current problems with Photoshop.
http://www.nvidia.com/object/win7-winvista-64bit-258.96-whql-driver.html
Note the recent (3 weeks ago) release.
-Noel

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

Why do i have a problem with accessing images in adobe muse

why do i have a problem with accessing images in adobe muse ??????!!!!!
i need heeeeeelp ASAP
pleeeeease

I am on the begining stages with constructing the web so i do not have yet URL. The problem is i can not insert any image any way. Whether by fill a browser or by place image, i have the same issue. All the images with all image's format unable to be selected and it is turned off
I really need help plz
Is there any info i can supply that would help you figiring out the problem ??

My 3rd generation Apple TV has a problem with ghosting images.

My 3rd generation Apple TV has a problem with ghosting images. Whenever it switches to a black screen (between screens, during shows) images from the previous screen are still "visible" and it's driving me insane. I know it's not the TV, no other components have the issue. I've tried switching out HDMI cables to no avail. Anyone else have this issue or know of a fix?

To fix the Apple TV, you need to plug it into your Mac or PC with a USB cable, open iTunes, and restore the firmware on your Apple TV.
Here is a link that will help: http://support.apple.com/kb/HT4367

I had a cracked screen and I got a replacement Iphone 4 yesterday. The colors appear washed out and muddy looking.

I took my Iphone 4 to an Apple retail store. It had a cracked screen and I got and out warrantee replacement for $149. Everthing works but the display is subpar. The wallpaper and images appear muddy yellow and the colors appear washed out.
Can I exchange it for another one?

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Export Problem with Color Image Washing Out

Similar Messages

Maybe you are looking for