Export Sales Underbound  transaction J1IIN  SHEcess not Captured

While creating excise Invoices for Exports under bond in transaction J1IIN , I am able to see values for BED, ECESS & SHECESS, however when I save the document and come back into display/ change mode , I do not see any value for SHECESS.  And ARE1 form also not captured in SHEcess. Plz guide me.
Thanks and regards
Chandra

Hi
  Please maintain SeCess condition types under" Maintain Excise Default" settings. Example if you have both total and percentage condition types in pricing procedure; JA1X Percentage condition type and JA1Y total condition type then maintain it for your tax procedure as below
A/R AT1 Perc
JA1X
A/R AT1 Cond
JA1Y
If you have only percentage condition type in your pricing procedure example JA1X. then maintain it for your tax procedure as follows
A/R AT1 Perc
JA1X
A/R AT1 cond
JA1X
If you maintain the above setting for your tax procedure then system will bring you the SeCess amount in change mode as well as display mode of excise invoice
Enjoy.........
Regards
MBS

Similar Messages

  • Export Sales Underbound pricing procedure

    Dear All,
    For export Sales underbound in pricing porcedure what type of conditions using for Excise duty, can any body plz explain the Export Sales underbound pricing procedure.
    Thanks and regards
    Chandra

    Hi
      If you are using TAXINJ procedure then you can have PR00 and UTXJ condtion type in pricing procedure and system will redetermine the excise duty while clicking on calculate button in J1IIN under
    utilization screen.
    For TAXINN you can have all the excise condition types maintained as statistical.
    Best Regards
    MBS

  • BED(14%) not appearing at the time of creation of Export Sales Excise Inv

    Dear All,
    While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
    If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
    Best Regards
    Atul Keshav.

    Dear Atul,
       Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
    regards,
    Sudhir
    Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM

  • JV for Export sale

    Freinds,
    Do we need to create JV using J1IH for Export sale, Credit and Debit memo?
    Please explain ?
    Thanks

    Same as in Domestic sales, Export sales too have Excise Invoice to capture the qtty / Excise duty involved in Exports.
    For
    Export sales, Excise Invocie will be created in J1IIN- with Excise type: LOU- Letter of Undertaking / Export under bond (as per client req). Here There will be no accounting entries. Only Quantity wil be passed to register.
    after that ARE-1 document will be prepared according to Excise law wrt: This Excise Invoice.
    Function Module: J_1I7_USEREXIT_DUTY_IN_EXPORT, code has to be include as
    SUPPRESS_CALCULATION = 'X'
    Credit Memo: Client is issuing Credit note to the customer, If Client has supportive doc's to avail the credit, then Excise JV has to pass through J1IH
    Debit memo: Almost like regular sales, there will be no physical delivery happens, so to adjust the debit note entries, need to Excise JV, through J1IS - OTHR/J1IH - OTHR.
    (make sure that account determination in line with Excise rules)
    Hope it helps

  • BDC Call Transaction - Doc.No not getting generated in Message Internal tab

    Dear All,
    I am using BDC Call Transaction method for uploading data for transaction, Iam able to successfully capture the Error messages, sucess messages and the transaction number is also displayed for the bdc run in Mode A, but in case of scheduling the job in background, the Error messages are displayed but the transaction number is not captured in the message Internal table( BDCMSGCOLL).
    Kindly look into the matter and revert back for any further info.
    Regards
    Naresh

    Hi,
    Please try using the following kind of code in 'CALL TRANSACTION'
        opt-dismode = 'E'.     " Exclusive mode
        opt-defsize = 'X'.
        opt-updmode = 'S'.
        opt-nobinpt = ' '.
        CALL TRANSACTION transaction_code USING ft OPTIONS FROM opt
                                                                             MESSAGES INTO t_bdcmsgcoll .
    Hope this will work.
    Thanks,
    Leo

  • BED & Higher education cess are not appearing in J1IIN in export sales

    Dear Experts,
    we have scenario, 
    - 1000 & 2000 Plants are excisable
    - Excise group is same for 1000 & 2000 plant
    - Serial Group is different for 1000 & 2000 plant.
    we enter materials from 1000 & 2000 plant for creating a export sales order ( IN one export sales order we enter material from different plant), in which excise duties are showing correctly even though we enter different plant in sales order. even commercial invoice also properly generated with proper excise duties but when we try to create  excise Invoice (J1IIN),  BED ,Education cess and  Higher education cess are correctly appearing for the materials of plant 1000, but only BED and Higher education cess are appearing for the material of plant 2000, +not appearing the Education cess in the excise invoice moreover that excise accounting entry too+
    But when try to create same scenario in domestic sales , all the documents ( Right from sales order to Excise invoice are working properly ,all the BED,Cess,Hcess are also properly appearing and accounting entry too.
    please help me to  resolve the urgent issue.
    Shibu Chandran

    Hi,
    As i said above you can not see those accounting entries for excise invoice in export.
    you can see the accounting entries for excise invoice in domestic sales process.but not in export process
    to see this difference you can just go to v/08 and select your pricing procedure for export sales,here you can see the tick mark for statistical field for all excise conditions.but you can not see this tick marks in domestic pricing procedure.
    and also as i said above you check those settings in J1ID T-code
    for this in J1ID select cess rates-click on change icon-here check whether you maintained plant-material-check AT1 field along with other fields like BED%,CESS%
    and also check EXCISE TAX RATES in that J1ID there you should have excise rates for chapter id combination
    and finally check material and chapter id combination
    Try this and let me know

  • No BED,Cess & HS Cess values are getting stored in export Sales after J1iin

    Hi,
    This is a problem which is CIN based (Country India) for Export Sales. We configured following thing –
    Excise Registration      -     1
    Excise Group     -     1 let’s say it is G1
    Series Group     -     2 let’s say they are S1 & S2
    (S1 – Domestic / Export Sale & S2 – 57 F4)
    Sub Transaction Type     -     2 let’s Say ES & IP
    (ES – Export Sale & IP - Import Purchase)
    Tax Procedure – TAXINN
    Maintained Proper “Defaults Condition Type”
    Also maintained all default “DLFC” and also additionally maintained “DLFC” with “ES - Sub Transaction Type” for Excise Accounts per Excise Transaction
    Maintained all required GL account per excise Transaction i.e
    G1 - DLFC - Co. Code -      -  All Required GL
    G1 - DLFC - Co. Code - ES -  All Required GL
    Maintained Default Excise Group & Series Group
    S. Org - Dis.Ch. - Div - Sh. Pt - Plant - G1 - S1 - Export Under letter of Undertaking - ES
    Pricing Procedure -     Export pricing consist containing “PR00”, BED, Cess & HS Cess (maintained in  both % & total). No account keys and statistical tick maintained except PR00 . So total 7 condition Types. Also proper condition record maintained.
    Now for my Domestic sales everything is working fine. Here Both excise tables i.e J_1iexchdr & J_1iexcdtl are getting updated after J1iin for BED, Cess & HS CESS.
    But in case of J1IIN of Export sale we are not able to store the values of ED, Cess & SHE Cess. Interesting thing is that these values are appearing initially while creating J1IIn through billing doc no. but as soon as we save it, only excise Invoice no is getting generated but no BED, CESS & HS Cess values are getting updated in tables.
    So can anyone is having any clue why this values are not getting stored. I want these values in Excise Invoice for ARE 1 processing.
    (We are using local number range for export invoice also)
    Early response needed. Thanks

    OK, no issues.
    I wanted to ask u wether u are posting these excise values..?
    and generally excise related condition types do not appear in Export pricing procedure as in export excise in not recoverable from the customer.
    Hence even if tehy appear, tehy should eb statistical in teh export pricing procedure.
    What you can do is,go to J1ID, Maintain excise indicator for customer.then Under the Excise rates, Choose Excise Tax rate.
    here you can maintain, Excise rate(BED %), ECS% and AT1%(higher Ed.Cess) for the chapter id in your material.
    similarly for all the chapter i'ds that you wish to make make an export for... (Remember to enter the Valid from and excise indicator)
    Now, do teh j1iin again,and choose teh utilzation tab,then click on teh pencil icon and choose "Export Under bond".
    If u fail to choose this option, systemw ill not allow you to carete an ARE1 for thsi excise invoice.
    Lemme know if this works.
    Regard;s
    Priyanka M.
    Reward points if helpful

  • Deemed export duty values not captured in ARE3 DOCUMENT

    HELLO
    I am testing for deemed export scenario against CT3 form
    As per requirement condition values JEX2 /JECS/JA1Y are amintained zero in sales document
    hence zero duty is captured in excise invoice
    while creating ARE3 document through tcode:J1A301 the base amount and duty rate is captured.
    but duty values are zero.
    Pls guide how can we capture duty vales in ARE3 document.
    Rgds Mugdha
    Edited by: Mugdha Patil on Feb 25, 2011 7:10 AM

    Dear Atul,
        in Deemed export after doing commercial invoice - capture the excise details in j1iin and click whether you are doing are3 with Licence. the values has to be there it must not be zero. After that you have to capture ARE3 in j1ia301.
    if the value is not flowing in j1iin then your customizing has some problem ie in TAX on goods movement the basic setting - determination on excise duty you must have not maintained the default conditions for excise in your TAXINN or TAXINJ procedure,
    Try this and let us know
    regards,,
    Sudhir

  • Excise Values not are not coming in Export sales

    Hello ,
    when i am doing Export Sales , the values i am able to see  but when i go to Utilization and click on Calculate TAX , the values are coming, Zero Vaules are There.
    But in Domestic its working fine
    Pls Help

    HI
    You have to use the User exit
    Ask your abapper to write the below code
    FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
    ""Local Interface:
    *" IMPORTING
    *" REFERENCE(YVBRK) TYPE VBRK
    *" EXPORTING
    *" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
    *If you do not want the excise duty to be calculated for a particular
    *transaction then you need to mark the flag supress_calculation as 'X'
    *This flag when left blank will trigger calculation of ED during j1ii
    *When it is marked, the ED copied from billing will be left as it is
    SUPPRESS_CALCULATION = 'X'.
    ENDFUNCTION
    Re: ARE-1&ARE-3
    regards

  • Export Sales Transactions

    Hi all,
    How the Export Sales is doing SAP.
    My Scenario is One material is exporting without Duty to another depot of same company outside india
    and selling from that depot to the customer of that country. how to map with multiple currencies, so that it should not vary the MAV.
    Please give the Step by step Transactions.
    regards
    gibi

    Dear,
    In your scenario you have to create STO from your  plant to depot. You have to create zero tax proforma invoice for this transaction. For further sales form depot to customer it will be standard process.
    Regards,
    Happy Surana

  • J1iin Export Sales

    Dear All,
    Kindly help in one more point in Export Sales, when i'm creating excise invoice after clicking on utlization tab, i'm not able to change from bond to non bond, or LUT, how to do ? can we change it in document level. if yes then how, as we can maintain one option for one serise group.
    thanks & gerards,
    lakshman

    i'm not able to change from bond to non bond, or LUT, how to do ?
    Ideally, you should be having a seperate series group for exports. 
    Coming to the issue, it depends on your IMG settings.  Go to Logistics-General > Tax on Goods Movement > India >  Business Transactions > Outgoing Excise Invoice > Maintain Default Excise Groups and Series Groups.
    Here check what is maintained under the tab "Export" for the combination of sales area, shipping point, plant, excise group and series group.
    thanks
    G. Lakshmipathi

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

  • BED is not capturing in the J1IIN

    Dear Experts,
    I have created commercial invoice ,in which i have entered only BED (Condition type JMAN)  manually (Rest of the duties like Cess and Ecess will appear automatically)then i created excise invoice with the help of J1IIN, while creating excise invoice manually entered BED is not capturing and not generating accounting entry also for BED but the other duties (Cess Ecess) is capturing properly in the  excise invoice and entries also generating.
    i have check the other commercial document also, wherever we entered BED manually the same problem we are facing and if BED is coming automatically, where we are not facing the problem.
    So please help me to resolve the issue urgently
    Shibu

    Sir,
    ,i have gone through the path as you suggested, where JMAN is not maintained. the thing is that we are not able to maintain JMAN in Tax Defualt information because we are entering occasionally (JMAN ) manual excise duty. mostly the excise duty is coming from preceding document. if i change the JEXP and maintain JMAN in Tax Defualt Information, i hope i will face problem if BED is coming from preceding document automatically, in that case i have to change again the JEXP instead of JMAN.
    Please give me help for resolving the isse
    Shibu Chandran

  • K007, Export Sales, Requirement not fulfilled

    Dear All,
    I have created one export order. In the pricing procedure, K007 condition type is present. Normally, as a rare case we do give discount to the customers on export sales.
    When I am entering the K007 condition manually, it is not allowing me to proceed further.
    The error message is as follows:
    Requirements are not fulfilled for condition K007
    Message no. V1215
    Diagnosis
    The requirements have not been fulfilled for <GL:condition type>condition K007.
    System Response
    The system does not allow further processing of the document.
    Procedure
    Delete the condition from the document.
    You can display the requirements allocated to the condition in Customizing for the relevant pricing procedure.
    Can I know any specific reason for this?
    Thanks and Regards
    Adithya

    This due to routine 2 assigned to cond type requirement in pricing procedure.
    See, as per F1 help for pricing routine 2, refer following example
    Some of the items in the order will be free to the customer and the customer service representative indicates this with the item category TANN.  In the IMG, item category TANN has been configured as not relevant for pricing.  Within the pricing procedure, the user assigns requirement '2' to all condition types.  Using this requirement, the system does not access any pricing condition records for the free line item.  In addition to offering free items, some of the prices for products in the sales order are defined as net prices.  When a net price is found, no subsequent discounts or surcharges should be assigned to the item.
    So, its system satandard behaviour & you can maintain value for K007 in the free item or item not relevant for pricing.
    Regards
    JP

  • Updated exchange rate not captured in sales order

    Hi,
    We have updated exhange rate type from 'M' to 'S' . However even after refreshing the sales order new exchange rate type not captured in the sales order

    Hi,
    Can you please elaborate on what you mean by "picked up wrong exchange rate". Normally in the "Sales" tab in SO header you have a place where you can enter / see the exchange rate.
    Regards
    Sreekanth.

Maybe you are looking for