Export Setting Will NOT save!

Eurrgh! I cannot save the settings on export for Compressor 2 I click OK after adding the features I need but nothing happens, a search of the forum did not reveal anything....any ideas?
G5 2GHz Power PC 1GB DDR/ Macbook 1.8Ghz   Mac OS X (10.4.8)  

Hi:
Probably reading this Building Custom Presets in Compressor 2 tutorial helps you.
Good luck!
  Alberto

Similar Messages

  • Very Strange - Mixer Record Source Setting Will Not Save - defaults to Microphone volum

    This issue has me stumped.. I've even tried a clean boot of XP.
    Firstly, I am using X-Fi Platinum, on XP, ASUS board
    The problem is that both in Control Panel and in Creative Mixer, any changes made to the recording source will not save. In other words, when I close down the Mixer and re-open, the default source is Microphone with volume 0. Even if all I do is increase the microphone volume, when I close that window down, it becomes volume 0 again. When I try the approach through Control Panel it is the same result. The microphone is not "mute" but the volume slider is all the way down to minimum, so its the same result. Also, if I change the recording source to "What You Hear" or "Mic 2" , as soon as I close down the mixer window, it is back to Microphone volume 0
    The strange thing is, I formatted my hard dri've and re-installed XP, and still I'm having the same problem.
    Thanks in advance for your help..

    I finally discovered the problem. It is the BlueBeat player that was responsible.
    Here is an exerpt from a press release:
    "Bluebeat.com uses MRT?s X SeCure technology which makes it next to impossible for an average user to save, record, convert or otherwise ?transcode? the audio streams on the Bluebeat.com"
    But the problem is that it effects the OS at such a low level that doing a "clean boot" still does not fix the issue.
    Keep in mind, that the BlueBeat player wasn't even running when it caused these issues. Fortunately, when I uninstalled BlueBeat, everything works fine again.
    Moral of the story? If you have X-Fi, avoid BlueBeat.com, because you will lose all ability to record, even when not running their player. I hope this helps some people out there.

  • Music setting will not save in slideshow

    After I create a slide show and pick a song from Itunes everything works fine. If I view another slide show then come back to the one I was just working on the default sample iphoto music plays, instead of the song that I previously selected.
    Is there any way to save my preferences so after I save my song preference it will always play that specific song rather than go back to the first sample song?

    How are you creating the slideshow? By pressing play on an Album or using the slideshow button in the toolbar. If the latter and the problem persists, then try delete the com.apple.iphoto.plist file from the home / library / preferences folder and try again.
    Regards
    TD

  • Outlook 2013 will not save Compact Navigation Option setting

    We have started upgrading some of the machines in our office from Office 2010 to 2013, (win7 and win 8 machines). I have found that Outlook will not save the selection of "compact navigation" in the "Folder Pane/Options" settings. I
    have tried a complete uninstall/reinstall of office 2013, resetting cleanviews, profile, etc. I cannot get it to save this setting. It always goes back to the extra large "Mail, Calendar, People, tasks" navigation. Any ideas? This is happening on
    muiltiple machines that we have upgraded from Office 2010. 

    Copying answer from similarly asked question:
    FOR THE FIRST STRING (To keep a compact navigation pane):
    Press the START button and type in "regedit"
    On the left side drill down to [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Options]
    Under EDIT in the toolbar select NEW>KEY and name it WunderBar. Make sure you have the new key selected.
    Under EDIT in the toolbar select NEW>DWORD (32-bit) Value and name it ABCompact. Make sure you select it.
    Under EDIT in the tool bar select MODIFY and change the value to 00000001
    FOR THE SECOND STRING (To modify the order of the navigation items):
    With regedit still open.
    On the left side drill down to [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences]
    Under EDIT in the toolbar select NEW>String Value and name it ModuleOrderAB. Make sure you select it.
    Under EDIT in the tool bar select MODIFY and change the value to 1,2,3,4,5,6,7,8,9
    Adjusting the order of the numbers will adjust the order they appear in. For instance in my case I wanted NOTES to show up fourth so my string is 1,2,3,5,4,6,7,8,9.

  • Macbook, Snow Leopard 10.6.8  Since the last software update Safari 5.1 will not save history.  Prefs. are set correctly, reset has been done, appropriage plist has been trashed, now Saf. 5.1 has been re-installed.  Still dumps history every time

    Macbook, Snow Leopard 10.6.8.  Safari 5.1.1
    Since the last software update, Safari will not save bookmarks history.
    Prefs. are set correctly, Cache has been dumped, reset done, appropriate .plist trashed, and finally an uninstall and clean install done
    with 5.1.1 download from the Apple support site.
    The problem still exists, making me very suspicious that this is a bug.
    Any solutions?  Let's hear 'em.

    M. Davis:
    Thank you for your kind and prompt solution.  It is a winner.
    Problem solved, again many thanks and a very fine evening/day wherever you
    may be.
    ~Very best.
    cwxpro

  • My HP Office Jet Pro L7555 scans but will not save it to a flash drive. Is there a fix for that?

    I have a some issues:
    1. My HP Office Jet Pro L7555 scans but will not save to a flash drive. (I get error messaqges when I try to download it to my computer) What is the fix for that?
    2. Sometimes when I turn it on it will indicate that one of the ink cartridges is empty and upon restartin it all the cartidges show full. What is the fix for that?
    3. We have a small network. I can not find the disks that came with the printer. How do I set  it up so it saves to one of the computers connected to the network?
    Thanks,
    PF1

    Hi,
    Heres a patch for missing scanned images
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-81532-2&cc=us&dlc=en&lc=en&...
    Heres the link for the full feature software download
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-3&cc=us&dlc=en&lc=en&...
    and use this document for ink related issues
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01628836&tmp_task=solveCategory&cc=us&dlc=en&ju...
    Hope this helps..
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Hello, I have a series of language cd's that I am trying to put onto my iTunes but when I download them, they will not save separately instead they are saving as the first disk so i am ending up with 3 disks on 1. Please help

    Hello, I am trying to copy a series of language cd's onto iTunes but each cd will not save separately, instead it is saving all as one disk. So I am ending up with 3 disks on 1 with 3 different track1, 2 etc. Please help as I am sure there is an easy solution to this that I have no clue about. Thanks

    After you insert the CD but before you import it into iTunes, select all tracks and set the disc number to 1, 2, 3 ... as appropriate.

  • Photoshop CS6 - Batch function will not save files

    OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
    Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
    I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original).  I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
    Attempt #1:
         Action Steps Recorded -
    Open
    Save for web (set size parameters here)
    Close
          Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    NO checkmarks next to any options
    Destination: folder - selected folder where small files should be saved (on desktop)
    NO checkmark on override action
    Did not change file naming parameters
    Result #1 - DID NOT SAVE FILES
    Attempt #2:
         Action Steps Recorded -
    Open
    Save for web (set size parameters here)
    Close
         Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Cehckmark override Action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop)
    NO checkmark on override action
    Did not change file naming parameters
    Result #2 - DID NOT SAVE FILES
    Attempt #3:
         Action Steps Recorded -
    Open
    Save for web (set size parameters here)
    Close
          Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Checkmark override action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop) 
    Checkmark override action "Save As" commands
    Did not change file naming parameters
    Result #3- DID NOT SAVE FILES
    Attempt #4:
         Action Steps Recorded -
    Open
    Image Size (set parameters here)
    Save as (set folder location here)
    Close
         Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Checkmark override Action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop) 
    NO checkmark on override action
    Did not change file naming parameters
    Result #4- DID NOT SAVE FILES
    Attempt #5:
         Action Steps Recorded -
    Open
    Image Size (set parameters here)
    Save as (set folder location here)
    Close
           Batch settings - 
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Checkmark override action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop) 
    Checkmark override action "Save As" commands
    Did not change file naming parameters
    Result #5- DID NOT SAVE FILES
    Please help!  This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save.  I have several hundred files that I need to run this on, so doing it individually is not an option.
    Thanks in advance for any and all insights!

    I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
    ~CG
    UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

  • Safari 7.0 will not save PDF

    My Safari 7.0 will not save PDF files that can be opened, what do I need to do to get this function working again?

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Photoshop CC will not save png files

    Photoshop CC will not save anything as a png. I tried uninstalling and reinstalling twice as was suggested on another post similarly discussed. Please help

    I think you should set up again!
    Video-Clip Vui-Clip Shock-Quay Len-Clip Hot-Clip Hài-Tin Shock-Phim Tam Ly 18+-chatvl-phim xxx

  • Firefox will not save my Connections settings, so opens on manual proxy every time, rather than No Proxy?

    I'm using Firefox 4.01 and it will not save my connections settings when I set them to "No Proxy" keeps defaulting to manual therefore it wont load any pages until I change it to "No Proxy" which I have to do every time I open firefox.

    See:
    * http://kb.mozillazine.org/Preferences_not_saved

  • Safari 5 will not Save a pdf

    Apparently since the OS 10.7.4 upgrade, Safari will not save a pdf from a google search page. Error message is "cannot export  (file name)". Any Mac users know what is going on here? Firefox works fine. I've ;ooked in Safari and Finder prefs but can't find anything that would relate to this. Trying to download some Camera RAW tutorials. Bookmarked them in Safari, and later d/l  in Firefox which sends them to Finder> Downloads by default.

    For anyone else who runs into this problem, go to your hard drive's Library/Internet Plugins and trash the two AdobeReader plugins that have PDF in their name, then restart Safari.   Many others have had this, starting with some Adobe update. It si probably not copnnected to 10.7.4, since one complainer was using Snow Leopard.

  • InDesign Will Not Save or Save As in CS6 or CC

    This has been an ongoing problem. I have Adobe Creative Cloud. I have uninstalled and reinstalled several times, updated to new versions. ONLY problems with INDesign.
    Will not SAVE or SAVE AS./
    I have been forced to export as In Design Markup (IDML) file as a workaround, which is not helpful at all.
    Save and Save As options are grayed out and unavailable.
    ANY IDEAS anyone? I see that there are others on discussion board for this issue, but no one seems to have successfully cracked this nut.
    In Design version 9.2.2
    Mac OSX 10.9.4, 3.4 Ghz Intel Core i7, 16 GB RAM, 1600 MHz DDR3. Plenty of machine.
    Thanks

    Dear Bonolgirl55,
    This has been a very frustrating experience - and I know there are many others out there dealing with this same problem. I have had several email and live chat conversations with the INDesign team about this. They have not yet solved the problem (they are reportedly aware and working on a fix for future update), but we did find two workarounds to the problem.
    First workaround is to export as IDML files and open that way. That is a maddening solution, you will find, and still does not allow you to UNDO or use the program to its maximum efficiency. It does help you prevent complete loss of your work however.
    Second workaround -- assuming you are using a Mac -- was to create a completely new Mac User on your computer, logout of your current user, then login to new user and reopen InDesign there. When I did that, InDesign had no problems at all. It worked fine. The issue with that, of course, is that you have to make sure your files and graphics are all copied over to new user Documents file, or or otherwise accessible from a shared drive somewhere. This solution allowed me to use InDesign without any of the Save / Save As / Undo issues -- but obviously undercut workflow productivity between Adobe programs and with other files, email, etc. as I was essentially cut off from my normal desktop work environment and lacked easy toggle between Mac Users.
    I am afraid that I have no other solution to offer, and I don't know when Adobe will figure this out. My problem ONLY applies to InDesign (I am a Creative Cloud subscriber). It's been very unpleasant and annoying.

  • I have Pages 09 but it will not save a document.  I have tried clicking on all the options but I keep getting an error message that the document cannot be saved.  Any help?

    I have Pages 09, but it will not save a document.  I have clicked on all options, but I cannot save anything.  Any thoughts?

    Hi lv,
    This may help. File > Export > PDF or Word or RTF.
    At least that will save your work.
    Regards,
    Ian.

  • Custom Authentication in 4.2 will not save Authentication Function Name

    Upgrade from 4.0 to 4.2.
    When creating a new Custom Authentication the Authentication Function Name will not save in the Apex Create\Edit screen. After the Apply Changes button is clicked and the authentication scheme reopened - the Authentication Function Name will be cleared. If PL/SQL code was populated in the source field - it will still be present.
    Looking in the WWV_FLOW_AUTHENTICATIONS table - a new record is created but attribute_03 (this seems be where the Function Name is stored) attribute_05 and attribute_15 are null. The PL/SQL entered in Apex is there in the PLSQL_CODE field.
    All preexisting Custom Authentications that existed - there fields are populated and still work correctly. However, if you edit the Authentication Scheme in Apex it nulls out those fields in the WWV_FLOW_AUTHENTICATIONS table and the scheme no longer works.
    I can manually set attribute_03 to my function name, and attribute_05 to 'N' in the WWV_FLOW_AUTHENTICATIONS table and the Authentication scheme will work as long as you never try to edit it and save inside APEX( these fields are nulled out if you do this).
    Also - Authorizations schemes are behaving similarly.
    Checking the WWV_FLOW_SECURITY_SCHEMES table - attribute_01 is always NULL.
    No error is ever given inside the Apex designer.
    Any ideas how I can debug this?
    10.2.0.4.0 DB.
    Edited by: Bill14 on Nov 27, 2012 7:32 AM

    That's what happens when you don't pay attention to what you are typing (me that is). Edited original post.
    DB version is 10.2.0.4.0 (11.5.10 is our ebiz version)
    The PL_SQL column in WWV_FLOW_AUTHENTICATIONS is a CLOB. Looking at a a data view in Toad it abbreviates the field to say(HUGECLOB).
    This does not occur on apex.oracle.com and all of our 4.0 installs still behave as expected. The DBA said that he checked the install logs and did not see anyting out of order. I've never done an APEX install, is there a specific log file (or naming convention for a logfile) that I can tell him to look in or look for?

Maybe you are looking for