Export Settings for sending a video to an email (NOT To Facebook etc.)

What settings should I use to send a short (4 minutes) video across the internet as an attachment.? I don't want to upload to a public site. I am sending to an email address. I have tried exporting to windows media, but the video has the jagged line problem and looks like crap. The source video is 1920 x 1080 29.97 fps. I am running PE 9. Thanks.

Vimeo, Facebook and Muvipix.com all allow you to post a video that can only be seen by invited guests.
And don't forget Photoshop.com -- the online storage site Adobe gives you free with these programs! As I say in my books, there are many great features on Photoshop.com, and it's well worth learning more about.

Similar Messages

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Import/Export Settings for Canon T4i Video

Hey folks,
I'm new to Premiere and loving it, but I'm wondering what the best sequence settings, as well as export settings, will be for video captured from my Canon Rebel T4i camera.
I prefer to shoot either in 1080p with 24 fps, or 720p at 60 fps––what settings within premiere should I use when setting up my project, and what are some good export options for Youtube/Vimeo?
thanks!

FAQ: How do I choose the right sequence settings?
FAQ: How do I export a movie for YouTube, Vimeo, iPad, iPhone, or Apple TV?

Export settings for HD-quality video

I'm using Quicktime Pro 7.6.4
I'm trying to create a short time-lapse video from stills from a DSLR.
What should my export settings be to create a video at HD quality?
Being a still photographer I had originally assumed that the image size was the main factor but I see the "date rate" had a lot to do with it.

Image size does matter as QuickTime can make "movies" from your image sequence files that would be too large to fit your display.
You can then scale down the "video" dimensions in the Movie properties window to fit your HD dimension of your choice.
Depending on how many images files you're bringing in with the image sequence import would also determine the "original" frame rate. Lots of large files may need at least a one frame per second during the import. You can then adjust this video "time" by adding it "scaled" to an audio file and then extracting the new video track.
300 large image files at one frame per second would be added (scaled) to ten seconds of audio to give a 30 fps rate. You may not need such a fast rate and adding it to a longer audio file may work better.
I would use the H.264 video codec. The data rate would require some experimentation. I would start at 2500 and move up in 500 increments until you find out what works best (file size versus image quality).
All of these settings also depend on your final delivery media (Web, Computer or local files).

Best export settings for 51 min video for itune styles sites?

Hey There I have a new bmx DVD about to come out and i want to try and sell it on PayLoadz.com,Itunes but they have a 2gig limit. The project settings are 1920 by 1080 30p and im using premiere pro cs 6. I hope someone can help thanks...

There is no way to get a decent 1920X1080 video into 2G when the duration is 51 minutes.
The bitrate would have to be so low that the image quality would suffer terribly.
Do the math. If you put it out there at a reasonable 25Mb/s you would need a file size of almost 10G.
Divide that by 5 to get 2G and your 25Mb/s becomes 5Mb/s. I suppose you could try that. If it was free you might get away with it. But if you want to sell it, people are going to expect a better image. I know I would.
But there you have it. Use H.264 as Kevin suggests, and set it for 5Mb/s. Export it and see what you think.

Best export settings for hd SLR video.

Hi
I edit video from canon eos 5d 1080p /29.97 and want to get the BEST quality in exported files. (To be seen witha a WD media player and a full hd high quality video projector) .
Premiere CS5 ver 5.03 cuda enabled GEForce 470 The original clips are .mov at about 45 mbps h264.
When I open media encoder I have a lot of possibilities.
If I choose "match sequence settings" I get an mpeg file 31 mbps with I frames appearing after two P frames. (Gop=3)
I can also export as mp4 with higher framerates (45 mbps) and so on,
I do not know wich is the best choice .
Any suggestions or experiences welcome
Tahnks

If I choose "match sequence settings" I get an mpeg file 31 mbps with I frames appearing after two P frames. (Gop=3)
Don't use "Match Sequence Settings." It is rarely useful.
(To be seen witha a WD media player and a full hd high quality video projector) .
<snip>
I do not know wich is the best choice .
The best choice will be dictated by what the media player can ingest and use. I would assume an H.264 MP4 will suffice, but you'll have to look into the supported formats, codecs, bitrates, and other parameters that the device allows.

Export settings for best possible video quality

I am using FCE and am putting together a DVD from a Canon HV20. I shot the tapes using the HDV option in the camera setup (1080i)
What do you recommend as the best method for exporting from FCE in order for me to see the highest quality picture? I tried using Export as Quicktime, and it looks "ok", but it's not the image quality I'd expect from HD, nor is it as good as viewing direct from the camera to my projector.
I don't mind waiting hours for rendering, so don't let that hamper your recommendations.
Thanks in advance.
DC

Export to QuickTime Movie. Play this back on your TV. It should look comparable to your camera output. As far as DVD creation goes I'd suggest doing a forum search. You are compression the material heavily yo get it from HD to SD.

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best export settings for DNxHD?

Hey guys,
I'm working with R3D files (4KHD) in CS6 and need to export them for grading/editing in DNxHD at 1080p. Any tips on the best export settings for this?
Also - is it necessary to downconvert the 4KHD in some way to 1080p before the export process? The files I'm ending up with are a noticeably poorer quality than the original; I'm not sure if this is due to an error I've made during the conversion or if its a natural part of using the codec?
Thanks if you can help!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best export settings for Kiosk type presentation.

I have 24 slides that I would like to begin playing automatically and loop.
What is the best export settings in Quicktime.... manual? or would that require a click?
I have set all the transition in and out timings on each slide.
Thank you.

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

FCE-HD export settings for slideshow

Hey dear specialists,
I need to have a help for the export settings for a slideshow
I am using FCE-HD 4.01 on either MacBookPro with Mountain Lion or on my old G5 with 10.6
Input are slides in JPEG with 15MByte Pixel.
As soon as I am using transition of a picture the result in export in all setting I can choose from FCE, which I found out is very bad, because picture has the interlacing effects at the borders
What can I change to get a good result
Thanks in advance for the feedbacks
Best regards
FJ
N.b.: screenshot abstract >>>> see right hand video lines

Hey Russ,
the video rate of the object does not change when I manipulate on the easy setting
If I import pictures, I do this directly from pircture folder into the BIN, and that should be independently from video input setting
The frame rate should also not be a problem for me here in Germany, because working directly from MAC to flatscreen
I put you a screenshot of the new sequence
The Mov output looks not that bad, even if one looks into detail see picture attached, the steps between one and next frame creates problems
I try also to send you the latest version of a slide transiltion example in iPhone quality ( this can not be attached ) it is a 2MB file. If you like I send you by email.
looks a bit improved vs the morning, but I do not feel confident.
What do you think?
Best regards and will come back tomorrow
FJ

Help! Best SD export settings for web CS4

Hello and thank you in advance for your help. I'm a newbie here and have read through many posts on exporting and found some good information here for creating a master http://forums.adobe.com/message/3005601. But, I am searching for export settings to send a 3:30 min. video to a client to upload to a website and you tube that is high resolution but not too huge of a file. I am looking for setting others have used to create this.
This is a SD tutorial video with a combination of .psd and .jpeg stills and graphics in After Effects compositions mixed in video footage. There are a lot of cross-dissolve transitions and I am getting pixelization with the settings below. It is a start, but I hope to get a smoother video for the web at 320x240 and 720x480. Any suggestions on aspect ratio, file format and settings would be appreciated. The original video is 720x480.
Format: H.264
NTSC, 720x480, 29.97 [fps], Progressive
AAC, 128 [kbps], 44.1khz, Stereo, Frequencey
Field Order: lower
Pixel aspect ratio: square pixels
Profile: high
Level: 3.1
VBR, 2 Pass, Target 6.00, Max 8.00 [mbps]
Widescreen 16:9
Thank you!! I need to get this project out today, so any help is very appreciated!

You could go that way, looks very nice.
I tried it but still not able to get it in my website.
Taking the save route is by Premiere.

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

Export Settings for sending a video to an email (NOT To Facebook etc.)

Similar Messages

Maybe you are looking for