Export to PDF is not printing all the columns in one single page.

Hi,
I have a report, I am exporting the report to PDF, but ALL the columns are not printing in a single page, It is getting printed 2 or more pages.
I am okay if I have a horizontal scroll bar or if the test size is reduced. Please see the recording and let me know whether it is possible.

Sorry sir, It is a slip of the tongue, I corrected my response already.
So it is defenitely possible to make ALL the columns appear in the same page in PDF regardless of how much width the report occupies?
If yes, can I see a horizontal scroll bar or the text will be shrinked to fit the page?

Similar Messages

  • Report not printing all the characters -main section width greater than 11"

    Hi,
    I am trying to build/modify a Report (used in Oracle Apps) which will be printed on some perforated paper. The perforated paper is little bit wider (11.25 inches) than the regular A4 size paper.
    The problem is when I print the report in Oracle Apps, the report isn’t printing all the characters at end of the page. I adjusted the page width to 11.25" in the main section's property palette, but the same thing is happening. Another point to mention is, I should use all of paper space.
    I am not sure if it’s a report builder issue or oracle apps issue.
    Any help is appreciated.
    Thanks
    Srikanth

    You must have larger margin. Try to make smaller header and/or footer.

  • SmartForm Printing all the Items in one page

    Hi,
    When iam trying to print the data in the smartform.....it is printing all the data in the one page(if 2 pages are shown in printpriview).But the same invoice is going to be printed in all the plants in the same format...so i hope it is not the printer problem.so any one pls go thru' this thread and try to give the solution as early as possible.....
    The main thing is if line items are 18.15 on one page and 3 on second page in printpriview...but while printing the the second page 3 line items are overwriting on the first 3 line items of the first page itself.
    Pls Asnwer as it is very Urgent.....
    Thnx in Advance

    Sorry sir, It is a slip of the tongue, I corrected my response already.
    So it is defenitely possible to make ALL the columns appear in the same page in PDF regardless of how much width the report occupies?
    If yes, can I see a horizontal scroll bar or the text will be shrinked to fit the page?

  • Infoview not displaying all the columns

    Hi All,
    I have abt 25 columns in my crystal report. Report looks fine in CR designer but when i view the same report in infoview , it doesnt display all the columns. Although i can scroll upto the right but  about 10 columns are missing.
    Kindly suggest.
    Thanks

    Hi,
    Can you please brief me what the approach you took to solve this issue, because even me facing the same problem and I have 35 columns in my report, I build the report on 11x17 page size.
    In that most of them are string type holding the 10 different levels of manager names, employee names and their contact information and few columns are numeric fields
    Since I adjusted all the fields to fit into the page, for all the lengthy name columns like "VenkateshwarRao" its showing "Venkat" and rest of the letters are truncated.
    So basically the user needs the report to download in Excel format, so currently I m able to export and manually adjusting them by selecting all fields in excel.
    But I am not able to show up all fields in info-view, only the first 15 columns are displayed and most of the textual columns are truncated.
    Thanks in advacne,
    Venkat

  • PSA Edit Dialog - Not showing all the columns

    Hi All,
    I need to edit the transaction data for 2LIS_13_VDITM in PSA. when I go to display the PSA data it shows few selected fields in the initial display not all coming in the data source.
    In Order to get that field in Data Display,  I change the display variant and bring the field in the data display .
    Now, When I try to edit that record the the Edit Dialog Pop Up  does not show me all the columns which are there in the Data Display. I checked in the display Selection Tab, the field list over there also does not contain this field.
    However, I am able to edit data for all other Data Sources.
    Has someone ever faced this kind of strange thing.  We were on support pack 18 and migrated to BW 3.1 support pack 20. I was able to edit data in PSA for this data source earlier. Can it be a support Pack Problem ?
    Requesting for your valuable suggestions on this!!!
    Regards
    Deepak

    Hi All,
    The below problem occured due to Support Pack upgrade.
    If you are upgrading Basis Support pack from 47 to 48, you might face this kind of problem.
    OSS Note Number : 821558 proved to be quite handy.
    Regards
    Deepak

  • Report Column Attributes Does Not Display All the Column Names

    Good Morning,
    I have an interactive query Select * from table_name. I have to select * since my query returns well over 32k. I have 162 columns in the query. On the screen, all the columns are displayed; however, on the report tab, only about half of the columns are displayed. The rest are cut off. I need to be able to go into these field's attributes. Is this an APEX bug, or am I just missing something.
    Regards,
    Kelly

    Hello Tony,
    I can't break them out because APEX is limited to one interactive report per page. There is need to be able to do computations on the data, which interactive reports allows. The data is all statistical.
    Regards,
    Kelly

  • How to print multiple identical-copies in one single page?

    Hi all,
    I need to print several copies of the same image in one single page. I've tried the following:
    - selecting the layout 4-pages in one.
    - printing 4 copies.
    However, this produce 4 physical pages, with the miniaturized image.
    No way to get 4 copies of the same image in the same page.
    Very thanks in advance,
    Jonatan

    jonatanc, welcome to Apple Discussions.
    Is the "image" you wish to print a picture image like a .jpg?
    I do this many times when I want to print 4 images on letter size photo paper. I use Photoshop Elements, but you could probably use most any graphic application.
    I do a Select All & Copy of the image. Then open a new file with a letter size. I then paste the image on the page 4 times & move the image towards the 4 corners of the page. Then print.
     Cheers, Tom

  • PDF not printing all the iamges or backgrounds

    I have a PDF document that has some various images and things on it.  Certain things are not printing for some reason.
    The specific information is I have a sheet of Guitar information.  On one page there's an example of a chord block.  The numbers showing what finger to put where shows fine but the actual gridlines that make up the strings and frets do not work.
    An example is this:
    http://www.freewebs.com/guitarlincs//Moveable%20Chords%20101/Major%20Barre%20Chord%20A%20S hape.jpg
    The numbers in circles show up but the actual lines do not.
    On other parts, whole examples of sheet music with bars and notes and everything just don't print.  They show up fine in the little preview window but not on the actual page.
    I found that if I set the "Print as Image" box, then it does print but it then takes 45+ seconds to process each page before it actually prinst which is not something I want to wait for.
    I'm not sure if these are setup as images or backgrounds or what in the actual PDF as I didn't create it.  Is there a setting to print backgrounds and things if that's what it is or is there any other setting anyone can think of other than the Print as Image option?
    Thanks.

    Here's a link to the page in question (although there are other pages as well):
    http://dl.dropbox.com/u/1787993/Guitar/Page_7_from1.L%26M_Guitar_Manual.pdf
    What I found is that if I print to my main printer (HP 4300), the gridlines of the pictures in the middle of the page don't show up.
    If I print to the Xerox 6360DT that I have, the picture shows up fine.
    There must be a setting in the HP properties that's making it not work but I haven't been able to figur out what the setting is.

  • PDF Form not printing all field/letters properly.

    Hi Everyone,
    I'm hoping someone can help me.
    I recently created a PDF Form to be filled out when setting up an new customer at my job.
    After filling out the form one of my co-workers is experiancing an issue when printing. Anytime he has two or more of the same letters in a field, they do not print.
    (For example)
    [email protected] will print as Je  @aol.com and will just pring our a blank field.
    Just for fun we tried to pring [email protected] and all we got was "        @aol.com".
    This seems to only happen on one pirinter and from my one coleagues computer, no one else.
    Any ideas?
    I did update his Acrobat to the most recent version and restarted the computer but we still have the same issues.
    Thanks.

    If it only acts up with the one printer. Then it’s a Print Driver Issue. Or some strange Printer problems that can be fixed by:
    Quiting the application your using with the printer
    Next Unplug Printer.
    IF wired Printer (SCSI, Serial, Parallel, USB, Thunderbolt) unplug computer that comes from Computer
    Leave everything unpluged for 2 minutes or more.
    Plug Power to Printer back in first
    Next Plug cable from Printer to computer in
    Turn power on to Printer
    Open Application
    Try to print Document.
    If prints okay  your done.
    If it doesn't Print, obtain the latest Print Drive from Manufacturer
    Remove the old driver from computer first.
    quit all apps and restart computer before installing new Driver
    Install New driver.
    Now try to print.
    If prints okay your done. If not there is an issue with Acrobat.
    Yes a Printer can work with 500 of your applications, and utilities, and not work with a particular application. (Usually  a conflict.)
    For example Adobe (Acrobat) has a very rich history of conflict with Print Drivers from HP. At time in the past It seemed like a Contest Adobe had seeing how fast they could change something Acrobat/Reader to conflict with HP Deskjet Printers, as soon as HP fixed an issue Hp would change something with a week or two.
    Another issue can be be font. Perhaps a Font used in the form is not on the computer that is acting up.

  • Why does "Print Booklet" not print all the files in book?

    My new Indesign CS4 will not let me do what I was able to do easily with Pagemaker 6 and Indesign CS2.  When I go to “Print Booklet”, the program will not print the entire book, but only whatever file is check marked at the bottom of the WINDOW tab on the Menu Bar. I have tried with the files in the BOOK Menu selected and not selected. No difference. I have tried every way I can think of to add and link the files indicated in the Book Menu to the actual files. Each time the same. I have reinstalled the program. Still the same. I am using a Mac PowerBook G4 with OS X 10.4.11.  Your ideas and help will be greatly appreciated..........Richard

    Sorry, Print Booklet simply isn't designed to be used with multiple files. You'll notice it isn't available in the Book Panel menu.
    You could export the entire book to PDF, then place the PDF in a new document and use Print Booklet to print that.

  • My printer will not print all the pages.

    Hello
    When I press print on my HP Deskjet printer 2544, it only prints one or two pages before saying 'Error printing' 'Could not print.' It's happened ever since I got it a few months ago.
    Thank you 
    This question was solved.
    View Solution.

    Hey there @hapy84 
    Thanks for posting on the HP Forums today!
    I can see your getting errors with the Deskjet 2544.  I should be able to provide some assistance in locating a resolution!
    Is the error message showing on the printer screen or coming up on the computer?
    I suggest checking to see if the issue is coming from the printer or the software in the computer.  A good way to check the printer hardware is to run a stand alone photo copy.  I recommend doing a 5 page copy of a blank page to ensure the printer can feed more then 3 pages without displaying an error message. 
    Here is a link regarding Copy Text or Mixed Documents on the Deskjet 2544.  When performing the copy you do not have to put a document on the glass.  That way the printer will feed blank pages and you are not waisting ink.
    If the hardware in the printer is OK then there is likely an issue with the HP software in the computer.  I would recommend uninstalling and re-installing at that point.  To uninstall HP software from the computer please follow the link regarding Uninstalling the Printer Software
    To reinstall the HP software to the computer install the CD.  If the CD is unavailable or does not work for any reason please follow the link for HP Deskjet 2544 All-in-One Printer Drivers. This will link you to the HP drivers page so you can download your printer software.
    Follow the link:
    Click Next
    Scroll down
    Click Driver - Product Installation Software (‏1)
    Click "download" next to HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers
    Run the download 
    Follow the HP install
    Let me know how it goes and thanks again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • L7680 not printing all the black, please help!

    I've got a HP L7680 that has original cartridges, in date etc etc but as of yesterday evening was missing bits of the black text when printing. The colour text was fine, but horizontally black bits were missing about a 1/3 and 2/3 of the way down, any ideas?? Thanks

    Heads might need to be cleaned.

  • Why se11 does not show all the columns of a table

    I have some text tables, e.g., T6WP4, when I look in SE11 it show me only two columns:
    MANDT and ETIF0.
    But when I look in contents of this table (SE16 or clicking table content icon in SE11), it show three columns:
    MANDT and ETIF0 and ETITX.
    I found this to be true with some other text bales as well TMBW1

    Hi zigzagdna,
    in SE11, Menu Goto -> text table you will switch to the text table. Look at the foreign key definition to see the relationship marked as text table.
    This is one of the basic concepts to enable a SAP-system to be  multi-language enabled - although 99% of all installations are strictly single monolingual -:)
    See also documentation [Text Tables|http://help.sap.com/saphelp_47x200/helpdata/en/cf/21ea9e446011d189700000e8322d00/frameset.htm], [Type of Foreign Key Fields|http://help.sap.com/saphelp_47x200/helpdata/en/b2/fbb85cc64611d295dd00a0c929b3c3/frameset.htm] and [Semantic Attributes of Foreign Keys|http://help.sap.com/saphelp_47x200/helpdata/en/cf/21ea91446011d189700000e8322d00/content.htm]
    It is a SAP feature that in SE16/SE16N the text is displayed in logon language if a text table is defined for the table displayed. If you want to maintain those table directly, you have to specify the language explicitly, usual SY-LANGU can be used as the LOGON language. Be aware that this is one-charcater internal (E=English) but 2-character external (EN = English, conversion exit used).
    Regards,
    Clemens

  • How to print two delivery challans in one single page

    Hi Experts,
    Here we have a requirement that,
    The user wants the two Delivery challan outputs in one page.
    and also for some documents he requires header and for some documents he doesn't require,
    for this what condition should require.
    Any idea regarding this...
    Thanks in adv
    Thushara

    do 2 times
    perform write_form.
    end do.
    for header u can give condtion in form.
    use if condition in the editor...
    this will help u...
    Reward IF....... <= IF what? Points removed... read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]!
    Regards
    Anbu
    Edited by: Julius Bussche on Jul 17, 2008 7:01 PM

  • Adobe reader not printing all document content.

    I am printing from a web based PDF document and it will not print all the document/ form content.
    I am using a Win7 computer, IE 8, and an HP DJ 2400 printer
    I have tried un-enabling advanced fatures, tried changing the print processor, and tried changing the options from document, to document and markups, to document and stamps, all to no avail.
    I know there is a simple issue and resolution to this, but I just can't remember what it is.
    Thanks in advance
    IKE

    Try copying the file to your local machine and then print it from there. So when it opens, click "File", then "Save a copy".

Maybe you are looking for